181 |
Lichtinduzierte Generierung und Charakterisierung optischer AnisotropieJung, Carl Christoph January 2004 (has links)
Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern.<br />
<br />
Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. <br />
<br />
Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt.<br />
<br />
Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten.<br />
<br />
Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt.<br />
<br />
Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen. / The optical anisotropy of thin films is of great interest mainly in the display technology, the optical data storage and for optical security elements. The topic of this thesis was the theoretical and experimental investigation of three-dimensional anisotropy and especially the investigation of light-induced three-dimensional anisotropy in thin organic polymer films. The results and newly developed methods can contribute significantly to technical optimisation processes, e. g. for the compensation of the viewing angle dependence of liquid crystal displays. <br />
<br />
The new method of immersion-transmission-ellipsometry (ITE) for the investigation of thinner layers was developed in the course of this PhD. The new method allows to determine the absolute three-dimensional refractive indices of a biaxial film. For the first time it has been possible to determine the three-dimensional indicatrix of transparent, 150 nm thin films with an accuracy of three digits after the decimal point. The ITE-method therefore has the potential to be used for the investigation of even thinner films.<br />
<br />
The light-induced generation of three-dimensional anisotropy was investigated in thin films of azobenzene-containing and cinnamate containing, amorphous and liquid crystalline homo- and copolymers. For the first time, quantitative investigations of the changes of light-induced, three-dimensional anisotropies in thin films of azobenzene containing and cinnamate containing polymers, that were brought about by annealing above the glass transition temperatures, were carried out.<br />
<br />
For many of the investigated polymers the three-dimensional order after irradiation with polarised light and subsequent annealing above the glass transition temperature seemed to be dependent on the film thickness. The reason could be the planar initial order of the spin-coated thinner films, which was detected with the new ITE-method.<br />
<br />
For the characterisation of tilt gradients in thicker polymer films a special method using waveguide spectroscopy was developed.<br />
<br />
Quantum chemically determined maximal values of inducible birefringence were compared with the experimentally determined values.
|
182 |
Adsorption of polyhydroxyl based surfactantsMatsson, Maria January 2005 (has links)
Adsorption on solid surfaces from solution is a fundamental property of a surfactant. It might even be the most important aspect of surfactant behavior, since it influences many applications, such as cleaning, detergency, dispersion, separation, flotation, and lubrication. Consequently, fundamental investigations of surfactant adsorption are relevant to many areas. The main aim of this thesis has been to elucidate the adsorption properties, primarily on the solid/water interface, of a particular class of polyhydroxyl based surfactants: the alkyl glucosides. By the use of ellipsometry, the equilibrium and kinetic aspects of adsorption on titanium dioxide with respect to structural effects has been studied. Furthermore, the effects of small amounts of cationic surfactant additives on the adsorption on silica have been investigated. The results have been compared with similar studies for other nonionic surfactants. We have found that the surfactant structure has a strong effect on the adsorption properties. An increase in the surfactant chain length increases the cooperativity of the system. An increase in the head group polymerization decreases the cooperativity and the plateau adsorbed amount at equilibrium. The effect of surfactant structure on the adsorption kinetics depends on the concentration relative to the cmc, while the there is a decrease in the rate of desorption with increasing hydrophobic chain length independent of the concentration. The adsorption/desorption process is concluded to be diffusion driven, as suggested by the model used. When comparing these results with studies on ethylene oxide based surfactants, we conclude that the two types of surfactants exhibit similar trends on surfaces onto which they adsorb. Adsorption from binary surfactant solutions is even more interesting than adsorption from single surfactant solutions, since it brings us one step closer to the systems used in applications. In addition, adsorption from a mixture can be very different from adsorption from any of the single surfactants in the mixture. Alkyl glucosides alone do not adsorb on silica, but addition of small amounts of a cationic surfactant to the alkyl glucoside solution allows for adsorption on silica. A comparison between the adsorption and bulk properties has shown that mixed micellization explains most, but not all, effects of the coadsorption properties. Changing the pH in the mixed systems reveals that a surfactant with a pH-dependent charge and the ability to adapt its charge to the environment, e.g. a surface, enhances the adsorbed amount over a wider range of pH values than a purely cationic surfactant. It is well known that alkyl glucosides and ethylene oxides adsorb differently on different types of hydrophilic surfaces. As a consequence, replacing ethylene oxides with alkyl glucosides might not be all straight-forward; however, we have shown that the effect of the surface can be eliminated by the use of a cosurfactant. / <p>QC 20101018</p>
|
183 |
Phospholipid membranes in biosensor applications : Stability, activity and kinetics of reconstituted proteins and glycolipids in supported membranesGustafson, Inga January 2004 (has links)
In this study the formation of supported membranes onto planar solid supports has been investigated. The stability and activity of reconstituted membrane receptors has been studied. The potential use of such preparations in biosensor applications is discussed. The lipid films were made by the Langmuir Blodgett and by the liposome fusion techniques. These supported films were characterised by ellipsometry, atomic force microscopy, surface plasmon resonance (SPR) and resonant mirror techniques. The thickness of the films was in agreement with that of a cell membrane. The kinetics of formation of the lipid films was studied and discussed. The proteins, bacteriorhodopsin, cytochrome oxidase, acetylcholinesterase and the nicotinic acetylcholine receptor were reconstituted into the supported membrane. The subsequent analysis showed that the proteins were individually distributed and that the activity was retained, in some cases for several weeks after immobilisation. The glycolipids, GM1, GM2, GD1b, asialo-GM1, globotriaosylceramide, lactosylceramide and galactosylceramide, were also reconstituted into the supported membranes. Their specific interaction with the toxin ricin or with its B-chain was examined using SPR. The affinity of intact toxin and of its B-chain differed markedly and was pH dependent. The carbohydrate chain length and charge density of the glycolipids also influenced the affinity.
|
184 |
Multilayer Structures for Biomaterial Applications : Biomacromolecule-based CoatingsHalthur, Tobias January 2005 (has links)
The cellular response to a biomaterial, such as a dental implant, is mainly governed by the surface properties, and can thus be altered by the introduction of a surface coating. In this thesis the buildup of a biomacromolecule-based coating formed by layerby-layer (LbL) deposition of the charged polypeptides poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) has been studied. In an attempt to make these coatings bioactive and useful for bone-anchored implants, an amelogenin protein mixture (EMD), has been immobilized in these thin polyelectrolyte multilayer (PEM) films. Multilayers were also built by LbL deposition of the natural biomacromolecules collagen (Col) and hyaluronic acid (HA). Multilayer films of these two extra-cellular biomacromolecules should be of interest for use as a scaffold for tissue engineering. The buildup of the multilayer films has been followed in situ, using ellipsometry, quartz crystal microbalance with dissipation (QCM-D), and dual polarization interferometry (DPI). The studied PLL/PGA multilayers were found to be highly hydrated, and to exhibit a two-regime buildup behavior, with an initial “slow-growing” regime, and a second “fast-growing” regime with a linear growth in film thickness and more than linear growth in mass. A net diffusion of polypeptides into the film during the buildup led to an increase in density of the films for each layer adsorbed. A change in density was also observed in the Col/HA film, where HA penetrated and diffused into the porous fibrous Col network. The formed PLL/PGA films were further found to be rather stable during drying, and post-buildup changes in temperature and pH, not losing any mass as long as the temperature was not raised too rapidly. The film thickness responded to changes in the ambient media and collapsed reversibly when dried. A swelling/de-swelling behavior of the film was also observed for changes in the temperature and pH. The EMD protein adsorbed to silica surfaces as nanospheres, and could by itself form multilayers. The adsorption of EMD onto PLL/PGA multilayer films increased at lower pH (5.0), and EMD could be immobilized in several layers by alternate deposition of EMD and PGA. / QC 20101019
|
185 |
SPR Sensor Surfaces based on Self-Assembled MonolayersBergström, Anna January 2009 (has links)
The study and understanding of molecular interactions is fundamentally important in today's field of life sciences and there is a demand for well designed surfaces for biosensor applications. The biosensor has to be able to detect specific molecular interactions, while non-specific binding of other substances to the sensor surface should be kept to a minimum. The objective of this master´s thesis was to design sensor surfaces based on self-assembled monolayers (SAMs) and evaluate their structural characteristics as well as their performance in Biacore systems. By mixing different oligo (ethylene glycol) terminated thiol compounds in the SAMs, the density of functional groups for bimolecular attachment could be controlled. Structural characteristics of the SAMs were studied using Ellipsometry, Contact Angle Goniometry, IRAS and XPS. Surfaces showing promising results were examined further with Surface Plasmon Resonance in Biacore instruments.Mixed SAM surfaces with a tailored degree of functional COOH groups could be prepared. The surfaces showed promising characteristics in terms of stability, immobilization capacity of biomolecules, non-specific binding and kinetic assay performance, while further work needs to be dedicated to the improvement of their storage stability. In conclusion, the SAM based sensor surfaces studied in this thesis are interesting candidates for Biacore applications.
|
186 |
Etude de l'oxydation thermique du titane et du zirconium sous irradiation aux ions d'argon dans le domaine du MeV (E ≤ 15 MeV)Do, Ngoc-Long 21 November 2012 (has links) (PDF)
Nous avons montré que l'irradiation aux ions d'argon d'énergie comprise entre 1 et 15 MeV cause des dommages en surface du titane et du zirconium, qui prennent la forme d'une oxydation accélérée et/ou d'une cratérisation dont les effets évoluent en fonction de l'énergie du projectile et de l'atmosphère de recuit (température et pression), simulant les conditions environnementales représentatives de l'interface gaine/combustible d'un réacteur REP. Par AFM, nous avons montré que la surface du titane et du zirconium était attaquée par bombardement aux ions d'argon, à haute température (jusqu'à 500°C) en milieu faiblement oxydant (sous pression d'air sec raréfié comprise entre 5,7 10-5 Pa et 5 10-3 Pa) et à une dose moyenne fixée à environ 5 1014 ions.cm-2. On observe ainsi la formation de cratères nanométriques sur toute la surface du titane irradié entre 2 et 9 MeV et celle du zirconium irradié à 4 MeV, dont les caractéristiques varient en fonction de la température et de la pression. Dans le cas du couple Ar/Ti, l'efficacité d'endommagement superficiel augmente lorsque l'énergie du projectile diminue de 9 à 2 MeV. Par ailleurs, alors que la surface du titane apparaît transparente au faisceau d'ions à 15 MeV, celle du zirconium révèle de nombreux cratères micrométriques entourés d'un large halo sombre. Les caractéristiques des cratères (taille et densité superficielle) diffèrent de façon significative de celles observées à la fois dans le domaine des basses énergies (keV) où le dépôt d'énergie est contrôlé par les collisions balistiques (Sn) et dans le domaine des hautes énergies (MeV - GeV) où le dépôt d'énergie est contrôlé par les excitations électroniques (Se), ce qui n'était pas complètement inattendu dans le domaine d'énergie intermédiaire étudié, dans lequel des effets de pouvoir d'arrêt combiné Sn - Se sont envisageables. Par XPS couplé au décapage ionique, nous avons montré qu'il existe un effet d'irradiation sur l'oxydation thermique du titane, exacerbée sous faisceau d'ions d'argon entre 2 et 9 MeV, et qu'il existe aussi un effet d'énergie sur l'épaisseur et la stœchiométrie de l'oxyde. L'étude menée par Ellipsométrie Spectroscopique sur les films d'oxyde formés entre 1 et 9 MeV a corroboré ces résultats et montré précisément qu'il existe un pic d'oxydation en fonction de l'énergie d'ions d'argon, qui présente un maximum à 3 MeV, dans les conditions de l'expérience. Les mesures de gain d'oxygène effectuées par NBS confirment l'existence de ce pic d'oxydation. Les résultats acquis à ce jour par NBS concernant l'oxydation thermique du zirconium sous irradiation à l'argon de 4 et 9 MeV confirment les travaux antérieurs du groupe Aval du Cycle Electronucléaire de l'Institut de Physique Nucléaire de Lyon, et suggèrent fortement l'existence d'un pic d'oxydation dans la même plage d'énergie de projectile que pour le titane.
|
187 |
Entwicklung von funktionellen Polymerbürsten mit modularen EigenschaftenRauch, Sebastian 30 July 2013 (has links) (PDF)
Im Rahmen dieser Arbeit wurden neuartige, temperatursensitive Polymerbürsten mit terminaler Click-Funktionalität hergestellt, die nicht nur im Detail untersucht bzw. charakterisiert wurden, sondern deren Eigenschaften zusätzlich durch die polymeranaloge Umsetzung mit einem entsprechend modifizierten Fluoreszenzfarbstoff, Polymer oder mit superparamagnetischen Nanopartikeln erweitert werden konnten. Mittels kontrolliert radikalischer Polymerisation wurde mono- und bi-funktionalisiertes Poly(N-isopropylacrylamid) mit unterschiedlichen Endgruppen und Molekulargewichten synthetisiert und über das "grafting to"-Verfahren an eine Modeloberfläche angebunden. Die kovalente Anbindung der entsprechenden Komponenten erfolgte entweder durch die Kupfer-katalysierte oder thermisch induzierte Alkin-Azid-Cycloaddition. Neben den physiko-chemischen Eigenschaften wurde im Besonderen das temperaturabhängige Schaltverhalten dieser funktionellen Polymerbürsten in situ untersucht, wobei neben der spektroskopischen Ellipsometrie als Hauptmethode, zusätzlich Rasterkraftmikroskopie, UV/VIS- und Fluoreszenzspektroskopie, sowie Elektronenmikroskopie verwendet wurden. Im Fall der Farbstoff-modifizierten Polymerbürsten zeigte sich, dass nicht nur die Eigenschaften des Farbstoffs durch das Polymer beeinflussbar sind, sondern auch das Quellverhalten der Polymerbürsten durch den Farbstoff. Die mit Nanopartikeln modifizierten Polymerbürsten zeigten eine homogene Verteilung der Partikel auf der Oberfläche, sowie eine veränderte Schaltcharakteristik, die durch das Auftreten eine dynamischen Wechselwirkungszone zwischen den Polymerbürsten und den Nanopartikeln erklärt werden kann. Mit Hilfe der thermisch induzierten Azid-Alkin-Cycloaddition konnten erstmalig definierte Kettenverlängerungen an Polymerbürsten durchgeführt und gleichzeitig der Nachteil der limitierten Pfropfungsdichte der „grafting to“-Methode überwunden werden. Darüber hinaus konnte der temperaturinduzierte Schalteffekt nicht nur erhalten bleiben, sondern in Bezug auf die Schaltamplitude auch signifikant vergrößert werden und ergab ein sensitiveres, verbessertes Polymerbürstensystem.
|
188 |
Einfluss der Verzweigung, Terminierung und Immobilisierung auf die Eigenschaften dünner Polyesterschichten / Influence of the branching, termination and immobilisation on the properties of thin polyester filmsReichelt, Senta 25 November 2008 (has links) (PDF)
Die vorliegende Arbeit liefert einen Beitrag zum Verständnis der komplexen Struktur-/Eigenschaftsbeziehungen dünner Schichten hochverzweigter Polyester. Für die umfassende Charakterisierung wurde eine Vielzahl analytischer Methoden kombiniert. Des Weiteren wurde das Anwendungspotential dieser Schichten hinsichtlich möglicher Sensoranwendung anhand der Adsorption von Modellproteinen gewichtet. Dazu war es notwendig verschieden Methoden zur Stabilisierung dieser Schichten zu entwickeln.
|
189 |
Wechselwirkung von dünnen Schichten aus HVZ Polyestern im wässrigen Medium mit ModellproteinenMikhaylova, Yulia 01 May 2006 (has links) (PDF)
The dissertation work focuses on the whole route of material development starting from the investigations of properties of the initial (raw) HBPs to their applications. Each research step is given in a separate chapter to enhance attention to various aspects of the aim of the work. Thus, every chapter is started with an introduction. After that, the methods applied and experimental procedure are described. Next part tries to give the comprehensive description of the results obtained. At the end of the chapter, the main points are summarized. The Chapter 1 gives the theoretical description of the main experimental techniques used in this work. In Chapter 2 the chemical (chemical composition, purity, typical structure elements) and physical (glass transition temperature, the temperature of the maximum decomposition, the thermal stability at the high temperatures, molar mass, polydispersity and possible aggregation in solution) properties examined by different techniques of polymer analysis are described. The Chapter 3 is divided into three separate parts: In Chapter 3.1 the description of the formation and modification of inter- and intramolecular hydrogen bonds of hydroxyl terminated HBP is presented to reveal the information of hydroxyl groups re- and/or association due to the high temperatures applied. In Chapter 3.2 the nature of the solid-liquid interface of HBP thin films have been studied by different surface sensitive techniques with respect to further protein adsorption investigations. In Chapter 3.3 the strategy for the fabrication of surface attached carboxyl terminated HBP using &quot;grafting to&quot; technique is developed. The Chapter 4 consists of two parts: The first (theoretic) part outlines the basic principles of protein chemistry, factors influencing on the protein molecule stability in aqueous medium, the mechanism of protein adsorption and forces involved in the adsorption process. In the second part the combination of different in situ techniques was applied to obtain a comprehensive description of complex adsorption processes of protein molecules on different polymer surfaces.
|
190 |
Multilayer Structures for Biomaterial Applications : Biomacromolecule-based CoatingsHalthur, Tobias January 2005 (has links)
<p>The cellular response to a biomaterial, such as a dental implant, is mainly governed by the surface properties, and can thus be altered by the introduction of a surface coating. In this thesis the buildup of a biomacromolecule-based coating formed by layerby-layer (LbL) deposition of the charged polypeptides poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) has been studied. In an attempt to make these coatings bioactive and useful for bone-anchored implants, an amelogenin protein mixture (EMD), has been immobilized in these thin polyelectrolyte multilayer (PEM) films. Multilayers were also built by LbL deposition of the natural biomacromolecules collagen (Col) and hyaluronic acid (HA). Multilayer films of these two extra-cellular biomacromolecules should be of interest for use as a scaffold for tissue engineering.</p><p>The buildup of the multilayer films has been followed in situ, using ellipsometry, quartz crystal microbalance with dissipation (QCM-D), and dual polarization interferometry (DPI). The studied PLL/PGA multilayers were found to be highly hydrated, and to exhibit a two-regime buildup behavior, with an initial “slow-growing” regime, and a second “fast-growing” regime with a linear growth in film thickness and more than linear growth in mass. A net diffusion of polypeptides into the film during the buildup led to an increase in density of the films for each layer adsorbed. A change in density was also observed in the Col/HA film, where HA penetrated and diffused into the porous fibrous Col network.</p><p>The formed PLL/PGA films were further found to be rather stable during drying, and post-buildup changes in temperature and pH, not losing any mass as long as the temperature was not raised too rapidly. The film thickness responded to changes in the ambient media and collapsed reversibly when dried. A swelling/de-swelling behavior of the film was also observed for changes in the temperature and pH.</p><p>The EMD protein adsorbed to silica surfaces as nanospheres, and could by itself form multilayers. The adsorption of EMD onto PLL/PGA multilayer films increased at lower pH (5.0), and EMD could be immobilized in several layers by alternate deposition of EMD and PGA.</p>
|
Page generated in 0.0256 seconds