The classical theory of colloids and surface science has universally been applied in modeling and calculations involving solid-liquid interfaces encountered in natural and engineered environments. However, several discrepancies between the observed behavior of charged solid-liquid interfaces and predictions by classical theory have been reported in the past decades. The hypothesis that the mean-field, pseudo-one-component approximation adopted within the framework of the classical theory is responsible for the differences observed is tested in this work via the application of modeling and experimental techniques at a molecular level. Silica and silicon nitride are selected as model charged solid surfaces, and mixtures of symmetric and asymmetric indifferent and non-indifferent electrolytes are used as liquid phases. Canonical Monte Carlo simulations (CMC) of the electrical double layer (EDL) structure of a discretely charged planar silica surface, embedded in solutions of indifferent electrolytes, reveal the presence of a size exclusion effect that is enhanced at larger values of surface charge densities. That effect translates into an unexpected behavior of the interaction forces between a charged planar surface and a spherical particle. CMC simulations of the electrostatic interactions and calculations of the EDL force between a spherical particle and a planar surface, similarly charged, reveal the presence of two attractive force components: a depletion effect almost at contact and a long-range attractive force of electrostatic origin due to ion-ion correlation effects. Those two-force components result from the consideration of discreteness of charge in the interaction of solid-liquid interfaces, and they contradict the classical theory predictions of electrostatic repulsive interaction between similarly charged surfaces. Direct interaction force measurements between a charged planar surface and a colloidal particle, performed by atomic force microscopy (AFM), reveal that, when indifferent and non-indifferent electrolytes are present in solution, surface charge modification occurs in addition to the effects on the EDL behavior reported for indifferent electrolytes. Non-uniformity and even heterogeneity of surface charge are detected due to the action of non-indifferent, asymmetric electrolytes. The phenomena observed explain the differences between the classical theory predictions and the experimental observations reported in the open literature, validating the hypothesis of this work.

The aim of this study was to investigate the molecular interactions of the anti-cancer drug Doxorubicin (DOX) with poly(methacrylic acid) grafted starch nanoparticles (PMAA-g-St). In order to fully understand the DOX/PMAA-g-St system, we conducted in-depth studies on DOX dimer dissociation and DOX/PMAA-g-St binding interactions using various techniques such as isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and fluorescence and absorption spectroscopy. Based on our experimental results, we developed a quantitative thermodynamic model with relevant parameters such as dissociation constant, Kd, as well as enthalpy of binding, ΔH, in order to explain DOX/PMAA-g-St interactions. In addition, we also studied the effect of environmental factors such as pH and NaCl on DOX self-association and DOX/PMAA-g-St complex formation. In conclusion, the combination of results obtained from various techniques as well as the multispecies equilibrium model, enables us to interpret quantitatively the data of drug loading onto and release from polymeric nanoparticles.

Orientador: Cesar José Bonjuani Pagan / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de Computação / Made available in DSpace on 2018-08-20T02:16:17Z (GMT). No. of bitstreams: 1 TrindadedeOliveira_Murilo_M.pdf: 8021703 bytes, checksum: 3faa29c4fb8fec84d66f98a7389ed1b5 (MD5) Previous issue date: 2012 / Resumo: Nesta dissertação propomos a análise de uma idealização estabelecida dentro da teoria eletromagnética. A partir de Um Tratado sobre Eletricidade e Magnetismo, James C. Maxwell expõe alguns conceitos físicos relativos ao aterramento elétrico em condutores. Assim, ele estima que a presença de um fio condutor que estabelece a conexão entre um corpo condutor e outro, ou mesmo ao terra elétrico, perturba as características do sistema envolvido (carga, potencial e campo elétrico). Desse modo, Maxwell preconiza que para sistemas teóricos ou idealizados, quão indefinidamente fino seja o fio, indefinidamente menor será a perturbação gerada. A contextualização de uma idealização física dentro do ensino da teoria eletromagnética, especialmente para um curso de engenharia, é necessária no intuito de enfatizar as diferenças entre modelos reais e teóricos, uma vez também que os estudantes destes cursos devem estar interessados no desenvolvimento prático dos conceitos apreendidos em sala de aula. Nesse sentido, quando tratamos do método das imagens, especificamente para o problema de uma carga na presença de um condutor esférico aterrado, temos a oportunidade de explorar os limites de um modelo teórico, delimitando quais nuances podem aproximá-lo de uma aplicação no mundo real. Em vista disso, notamos que a maioria dos livros didáticos usados no ensino do eletromagnetismo, quando lidam com o problema do aterramento da esfera, simplesmente negligenciam a questão suscitada por Maxwell, de modo a transformar o problema em um exercício puramente matemático, sem necessidade de explicar os fundamentos físicos que sustentam a solução do problema. Portanto, o intuito do presente trabalho é desenvolver um modelo cuja solução defina o comportamento físico para ambos os casos (levando em consideração ou não a existência da conexão da esfera com o terra elétrico), bem como verificar os limites deste modelo teórico / Abstract: In this work, we propose the analysis about an idealized established within electromagnetic theory. From A Treatise on Electricity and Magnetism, James C. Maxwell presents some physical concepts related to electrical conductors grounded. In this direction, he estimates that the presence of a straight metallic wire which establishes the connection between a conducting body and another, or even to electrical ground, disturbs the properties of the system involved (charge, potential and electric field). Thus, Maxwell preconize for theoretical or idealized systems, how indefinitely thin is the wire, indefinitely lower is the disturbance created. The context of a physical idealization into the teaching of electromagnetic theory, especially for an engineering degree is required in order to emphasize the differences between real and theoretical models, since the students of these courses should be also interested in the practical development of the concepts learned in the classroom. In this sense, when we discussed the method of images, specifically to the problem of a charge point charge in the presence of a grounded conducting sphere, we have the opportunity to explore the limits of a theoretical model, outlining which nuances can approach it to a real world application. In view of this, we note that most of the textbooks used in teaching electromagnetism, when deals with the problem of grounded sphere, they simply neglect the issue raised by Maxwell. In order to transform the problem into a purely mathematical exercise, without to explain the physical foundations that support the solution of the problem. Therefore, the aim of this work is to develop a model whose solution defines the physical behavior for both cases (taking into account or not the existence of a connection of the sphere with the electrical ground), and to verify the limits of this theoretical model / Mestrado / Eletrônica, Microeletrônica e Optoeletrônica / Mestre em Engenharia Elétrica

The exploitation of colloidal building blocks with morphological and functional anisotropy facilitates the generation of complex structures with unique properties, which are not exhibited by isotropic particle assemblies. Herein, we demonstrate an easy and scalable bottom-up approach for the programmed assembly of hairy oppositely charged homogeneously decorated and Janus particles based on electrostatic interactions mediated by polyelectrolytes grafted onto their surface. Two different assembly routes are proposed depending on the target structures: raspberry-like/half-raspberry-like or dumbbell-like micro-clusters. Ultimately, stable symmetric and asymmetric microstructures could be obtained in a well-controlled manner for the homogeneous–homogeneous and homogeneous–Janus particle assemblies, respectively. The spatially separated functionalities of the asymmetric Janus particle-based micro-clusters allow their further assembly into complex hierarchical constructs, which may potentially lead to the design of materials with tailored plasmonics and optical properties.

L'auto-organisation des organismes vivants est d'une complexité et d'une efficacité étonnantes. Plus précisément, les systèmes biologiques abritent un nombre gigantesque de réactions très spécifiques qui nécessitent que la bonne biomolécule se retrouve à la bonne place, dans le bon ordre et en un temps suffisamment court pour permettre le fonctionnement cellulaire, et au-delà la vie cellulaire. D'un point de vue dynamique, cela pose la question fondamentale de savoir comment les biomolécules trouvent efficacement leur(s) cible(s) spécifique(s), ou encore, quels types de forces rassemblent tous ces partenaires de réaction spécifiques dans un environnement aussi dense et ionisé que les micro-environnements cellulaires. Dans cette thèse, nous explorons la possibilité que des biomolécules puissent interagir à travers des interactions électromagnétiques de longue-portée telles que ces dernières sont prédites à partir des premiers principes de la physique; ''longue-portée'' signifiant que les interactionsen question sont actives sur des distances bien plus larges que les dimensions typiques des molécules mises en jeu (i.e., plus grandes qu'environ 50 angströms dans les systèmes biologiques). Après avoir posé les fondements théoriques concernant les interactionsde longue-portée potentiellement actives sur de longue distances dans un contexte biologique, nous étudions la posssibilité de détecter leur éventuelle contribution à partir de dispositifs expérimentaux qui sont accessibles de nos jours. Sur ce dernier point, des résultats préliminaires encourageants tant sur le plan théorique qu'expérimental sont présentés. / Self-organization of living organisms is of an astonishing complexity and efficiency. More specifically, biological systems are the site of a huge number of very specific reactions thatrequire the right biomolecule to be at the right place, in the right order and in a reasonably short time to sustain cellular function and ultimately cellular life. From the dynamic point of view, this raises the fundamental question of how biomolecules effectively find their target(s); in other words, what kinds of forces bring all these specific cognate partners together in an environment as dense and ionized as cellular micro-environments. In the present thesis, we explore the possibility that biomolecules interact through long-range electromagnetic interactions as they are predicted from the first principles of physics; "long-range" meaning that the mentioned interactions are effective over distances much larger than the typical dimensions of the molecules involved (i.e., larger than about 50 angströms in biological systems).After laying the theoretical foundations about interactions that are potentially active over long distances in a biological context, we investigate the possibility of detecting their contribution from experimental devices which are nowadays available. On the latter point, encouraging preliminary results both at the theoretical and experimental levels are exposed.

Estudos teóricos dos mecanismos moleculares responsáveis pela formação e estabilidade de complexos moleculares vêm ganhando relevância pelas possibilidades práticas que oferecem, por exemplo, na compreensão de diversas doenças e no desenho racional de fármacos. Neste projeto, nossa ênfase está no estudo de complexos de proteínas, extraídos do banco de dados de proteínas (PDB), onde desenvolvemos ferramentas computacionais as quais permitem efetuar análises em duas direções: 1) efetuar previsões básicas, através do emprego de propriedades eletrostáticas de proteínas, em diferentes condições e níveis preditivos e 2) realização de um conjunto de análises estatísticas, como freqüência de contato, em busca de preditores de complexos de proteínas e identificar padrões de interação entre seus aminoácidos em função da distância de separação. Com base nos resultados obtidos por ambos os estudos, objetivamos quantificar as forças físicas envolvidas na formação dos complexos protéicos. O foco do projeto, a longo prazo, é prever o fenômeno da complexação através da fusão dessas duas linhas de estudos: preditor básico de complexos protéicos e análise do potencial estatístico entre os aminoácidos que formam o complexo. O presente projeto é concluído com a construção de portais web que disponibilizarão os resultados obtidos por nossos trabalhos bem como a possibilidade de qualquer usuário, efetuar consultas por propriedades de proteínas e/ou grupo de proteínas. / Theoretical studies of the molecular mechanisms responsible for the formation and stability of molecular complexes are gaining relevance for the practical possibilities that they offer, for example, in the understanding of diverse diseases and rational drug design. In this project, our emphasis is on the study of protein complexes, extracted from protein data bank (PDB). We have developed computational tools which allow to perform analyses in two directions: 1) to make basic complexation forecasts, through the use of electrostatics properties of proteins, in different conditions and predictive levels, and 2) to carry out a set of statistical analyses, as contacts frequency, in order to build up predictor of protein complexes and to identify patters of interactions between the amino acids as a function of their separation distance. Based on the results obtained on both studies, we aim quantify the physical forces involved in the formation of protein complexes. The focus of the project, in the long run, is to foresee the phenomenon of the protein complexes through the fusing of these two study lines: a coarse-grained predictor of protein complexes and analysis of the statistical potentials between the amino acids that form the complex. The present project is concluded with the construction of web services where we make available the results obtained on our works. This server also has the possibility to be used by any computer user, that wishes to perform search on protein and/or protein group properties

Στην εργασία αυτή μελετήθηκε η ρόφηση και η εκρόφηση του παρασιτοκτόνου ατραζίνη (atrazine) σε πρότυπες εδαφικές ουσίες καθώς και σε ένα τυπικό δείγμα εδάφους, τόσο σε αντιδραστήρες διαλείποντος έργου (batch) όσο και σε πληρωμένες κλίνες (bed). Ως πρότυπες ουσίες επιλέχθηκαν η πυριτία (silica-gel, SiO2), η αλούμινα (γ-alumina, Al2O3), το ανθρακικό ασβέστιο (calcite, CaCO3) και το χουμικό οξύ (humic acid). Η ατραζίνη ροφείται σημαντικά στο χουμικό οξύ στην πυριτία και στο έδαφος, όμως βρέθηκε ότι έχει πολύ μεγαλύτερη συγγένεια για το χουμικό οξύ σε σύγκριση με την πυριτία. Η ατραζίνη δεν έδειξε να ροφείται στη γ-αλούμινα και το CaCO3, ανεξαρτήτως από τις πειραματικές συνθήκες που χρησιμοποιήθηκαν. Σε όλες τις περιπτώσεις, η κινητική μελέτη έδειξε δύο διακριτά στάδια: ένα πρώτο γρήγορο στάδιο ρόφησης της ατραζίνης, διαδεχόμενο από ένα δεύτερο πιο αργό στάδιο. Η κινητική της ρόφησης υπακούει ικανοποιητικά στο μοντέλο Elovich. Στα χρονικά πλαίσια που μελετήθηκε η ρόφηση και η εκρόφηση, η διεργασία είναι αντιστρεπτή και η ατραζίνη εκροφείται ποσοτικά. Οι ισόθερμοι ρόφησης της ατραζίνης λήφθηκαν σε διαφορετικές τιμές ιοντικής ισχύος, pH και θερμοκρασίας και υπακούουν στο μοντέλο Freundlich. Σε όλες τις περιπτώσεις που μελετήθηκαν, η αύξηση της ιοντικής ισχύος του διαλύματος προκάλεσε αύξηση της ροφημένης ποσότητας της ατραζίνης. Η ρόφηση της ατραζίνης μειώνεται καθώς το pH του διαλύματος αυξάνεται. Όσον αφορά στην πυριτία, η ρόφηση της ατραζίνης φαίνεται ότι γίνεται κυρίως μέσω δεσμών υδρογόνου με τις υδροξυλομάδες της επιφάνειας. Όσον αφορά στο χουμικό οξύ, το σημαντικότερο ρόλο στη ρόφηση παίζει η διάχυση της ατραζίνης προς το εσωτερικό του στερεού όπου η ρόφηση επιτυγχάνεται κυρίως μέσω υδρόφοβων αλληλεπιδράσεων. Η προσρόφηση της ατραζίνης στην πυριτία αυξάνεται σημαντικά καθώς αυξάνεται η θερμοκρασία του διαλύματος, μια τάση που δεν παρατηρείται κατά τη ρόφηση της ατραζίνης στο χουμικό οξύ. Η θερμοδυναμική ανάλυση έδειξε ότι η ρόφηση στα μοντέλα εδάφους είναι φυσική αφού παρατηρήθηκαν τιμές της ενθαλπίας ρόφησης στην περιοχή των 10 kJ mol-1. Οι λαμβανόμενες ισόθερμοι ρόφησης από τα πειράματα σε πληρωμένες κλίνες ήταν σε καλή συμφωνία με αυτές που λήφθηκαν από τα πειράματα στους αντιδραστήρες διαλείποντος έργου. Η παρουσία χουμικού οξέος στις κλίνες προκαλεί με το χρόνο δραστική μείωση της διαπερατότητας. / Adsorption and desorption of the herbicide atrazine was investigated on the principal inorganic constituents of soil, as well as on a typical Greek soil sample. The studies were conducted both in batch, stirred reactors and in packed beds. Silica-gel (SiO2), γ-alumina (Al2O3) and calcite (CaCO3), were selected as model inorganic substances. Humic acid was selected as a model substance representative of the organic part of soil. Significant adsorption of atrazine was measured on the humic acid, silica and on the soil suspensions in electrolyte solutions. Atrazine exhibited higher affinity for humic acid rather than for silica. Atrazine did not adsorb on γ-alumina and on CaCO3 regardless the experimental conditions (pH range or total solid available for adsorption). In all cases, kinetic results have shown two distinct features: a first, fast sorption step, followed by a second, slow step. The kinetics data of atrazine uptake on both substrates yielded satisfactory fit to the Elovich model. Atrazine was found to be completely desorbed from both the humic acid and the silica substrates. Adsorption isotherms for atrazine were obtained at different values of ionic strength, pH and temperature. The adsorption data gave the best fit to the Freundlich model. In all cases investigated, the amount of adsorbed atrazine increased upon increasing the ionic strength of the solution. The adsorption of atrazine decreased with increasing solution pH. The adsorption of atrazine on silica was primarily dominated by the formation of hydrogen bonds with the surface hydroxyl groups. In the case of humic acid, the diffusion of atrazine to the interior of the solid seemed to play the most significant role. Inside the organic substance particles, sorption took place mainly through hydrophobic interactions. The sorption of atrazine on silica surface increased considerably with increasing temperature, a trend not found in the case of humic acid. The thermodynamic analysis yielded adsorption energy values of the order of 10 kJ mol-1 suggesting physical adsorption. The isotherms obtained from the packed bed experiments were in a good agreement with those obtained from batch experiments. Finally, humic acid grains, mixed with silica in packed beds, were found to change morphology upon hydration which resulted to swelling. The humic substances clogged a large portion of the pores of the packed beds, decreasing drastically their permeability.

Estudos teóricos dos mecanismos moleculares responsáveis pela formação e estabilidade de complexos moleculares vêm ganhando relevância pelas possibilidades práticas que oferecem, por exemplo, na compreensão de diversas doenças e no desenho racional de fármacos. Neste projeto, nossa ênfase está no estudo de complexos de proteínas, extraídos do banco de dados de proteínas (PDB), onde desenvolvemos ferramentas computacionais as quais permitem efetuar análises em duas direções: 1) efetuar previsões básicas, através do emprego de propriedades eletrostáticas de proteínas, em diferentes condições e níveis preditivos e 2) realização de um conjunto de análises estatísticas, como freqüência de contato, em busca de preditores de complexos de proteínas e identificar padrões de interação entre seus aminoácidos em função da distância de separação. Com base nos resultados obtidos por ambos os estudos, objetivamos quantificar as forças físicas envolvidas na formação dos complexos protéicos. O foco do projeto, a longo prazo, é prever o fenômeno da complexação através da fusão dessas duas linhas de estudos: preditor básico de complexos protéicos e análise do potencial estatístico entre os aminoácidos que formam o complexo. O presente projeto é concluído com a construção de portais web que disponibilizarão os resultados obtidos por nossos trabalhos bem como a possibilidade de qualquer usuário, efetuar consultas por propriedades de proteínas e/ou grupo de proteínas. / Theoretical studies of the molecular mechanisms responsible for the formation and stability of molecular complexes are gaining relevance for the practical possibilities that they offer, for example, in the understanding of diverse diseases and rational drug design. In this project, our emphasis is on the study of protein complexes, extracted from protein data bank (PDB). We have developed computational tools which allow to perform analyses in two directions: 1) to make basic complexation forecasts, through the use of electrostatics properties of proteins, in different conditions and predictive levels, and 2) to carry out a set of statistical analyses, as contacts frequency, in order to build up predictor of protein complexes and to identify patters of interactions between the amino acids as a function of their separation distance. Based on the results obtained on both studies, we aim quantify the physical forces involved in the formation of protein complexes. The focus of the project, in the long run, is to foresee the phenomenon of the protein complexes through the fusing of these two study lines: a coarse-grained predictor of protein complexes and analysis of the statistical potentials between the amino acids that form the complex. The present project is concluded with the construction of web services where we make available the results obtained on our works. This server also has the possibility to be used by any computer user, that wishes to perform search on protein and/or protein group properties

Une fois ingérées par un insecte sensible, les toxines insecticides du bacille de Thuringe doivent être activées par les protéases intestinales de cet insecte. Leur premier domaine, un ensemble de sept hélices-α amphipathiques, est responsable de leur insertion dans la membrane luminale de certaines cellules de l’intestin médian, ce qui crée des pores peu sélectifs. La toxicité et la capacité à former des pores d’une telle toxine, la Cry9Ca, de ses mutants simples R164A et R164K et d’un fragment de 55 kDa résultant d’un clivage protéolytique au niveau de son résidu 164 ont été étudiées à l’aide d’une combinaison de modélisation par homologie, de bioessais, d’expériences de gonflement osmotique avec des vésicules de membrane en bordure en brosse de larves de sphinx du tabac et de mesures électrophysiologiques sur des intestins isolés. Ni les mutations simples ni le clivage protéolytique n’ont altéré la toxicité de la Cry9Ca. Dans une solution à faible force ionique, toutefois, la formation des pores dépend fortement du pH : une augmentation de celui-ci de 6,5 à 10,5 a entraîné une baisse irrégulière et par étapes successives de la perméabilité membranaire. Les quatre préparations de toxine ont néanmoins dépolarisé la membrane apicale d’intestins médians fraîchement isolés baignant dans une solution contenant 122 mM de KCl à pH 10,5. L’activité de la Cry9Ca, et des mutants R164A et R164K, a été grandement stimulée lorsque les expériences ont été effectuées en présence de suc intestinal, de lipides extraits d’un volume équivalent de suc intestinal ou d’un cocktail d’inhibiteurs de protéases solubles dans l’eau. De plus, le rôle des boucles inter-hélicales du Domaine I lors de l’insertion dans la membrane a été étudié avec des mutants doubles de la Cry9Ca dont les mutations introduisaient, neutralisaient ou renversaient une charge électrique. À l’exception de trois d’entres eux, tous ces mutants ont conservé une toxicité et une capacité à former des pores comparables à celles de la toxine parentale. L’ensemble de ces résultats suggère que le micro-environnement de l’intestin médian contribue à minimiser l’influence des charges de surface portées par les résidus des boucles inter-hélicales du Domaine I sur la capacité des toxines du bacille de Thuringe à former des pores. Il indique aussi que, d’une part, selon le site de clivage et les conditions expérimentales utilisées, des protéolyses supplémentaires de la toxine Cry9Ca activée peuvent soit stimuler, soit nuire à son activité et que, d’autre part, le suc intestinal du sphinx du tabac contient probablement un inhibiteur de protéases qui pourrait jouer un rôle important dans l’activité des toxines du bacille de Thuringe. / Once ingested by susceptible insects, Bacillus thuringiensis insecticidal toxins must be activated by the insect’s intestinal proteases. Their first domain, a bundle of seven amphipathic -helices, is responsible for their insertion into the luminal membrane of midgut cells, thereby creating poorly selective pores. The toxicity and pore-forming ability of one such toxin, Cry9Ca, its single-site mutants, R164A and R164K, and of the 55-kDa fragment resulting from its proteolytic cleavage at residue 164 were investigated using a combination of homology modeling, bioassays, osmotic swelling experiments with Manduca sexta larval midgut brush border membrane vesicles and electrophysiological measurements on isolated midguts. Neither the single mutations nor the proteolytic cleavage altered Cry9Ca toxicity. In low ionic strength solutions however, pore formation was highly dependent on pH: increasing pH from 6.5 to 10.5 resulted in an irregular step-wise decrease in membrane permeabilization. All four toxin preparations nevertheless depolarized the apical membrane of freshly isolated midguts bathing in a solution containing 122 mM KCl at pH 10.5. The activity of Cry9Ca, R164A and R164K was greatly enhanced when the experiments were conducted in the presence of midgut juice, the lipids extracted from an equivalent volume of midgut juice or a cocktail of water-soluble protease inhibitors. Additionally, the role of the interhelical loops of Domain I in membrane insertion was investigated with Cry9Ca double mutants with mutations that either introduced, neutralized or reversed an electrical charge. All but three mutants retained a toxicity and a pore-forming ability that were comparable to those of their parental toxin. Overall, the results suggest that the midgut microenvironment contributes to minimizing the influence of surface charges carried by Domain I interhelical loop residues on B. thuringiensis toxins pore-forming ability. They also indicate that, depending on the cleavage site and on the experimental conditions used, further proteolysis of the activated Cry9Ca toxin can either stimulate or be detrimental to its activity and that M. sexta midgut juice probably contains protease inhibitors that could play a major role in the activity of B. thuringiensis toxins in the insect midgut.

Um polieletrólito catiônico (poliamina), com baixo peso molecular e elevada densidade de carga, normalmente aplicado como agente coagulante do lixo aniônico, foi usado para estudos de retenção e drenagem na fabricação de papel. O uso do carboximentil celulose de sódio para simulação do teor de lixo aniônico e seu efeito na retenção de cargas minerais foi uma característica importante para este trabalho. Pode ser observado que o aumento da dosagem do polímero catiônico tanto melhora a retenção de cargas minerais, avaliada pela turbidez do filtrado, quanto melhora a drenagem do sistema, avaliada pela velocidade de escoamento. Entretanto, elevadas dosagens deste polímero comprometeram os resultados destes parâmetros devido à inversão de carga do sistema. Pode também ser confirmado que forças de cisalhamento excessivas prejudicam a retenção de cargas minerais. Ademais, um polianfótero, com peso molecular e densidade de carga elevados, contendo grupos positivo (N-[3-(N,N-dimetilamino)propil]acrilamida), negativo (ácido metileno butanodióico) e nulo (acrilamida) na mesma cadeia, foi testado como agente de resistência a seco do papel. Todos os estudos em nível molecular sobre o comportamento do polianfótero em solução e o seu comportamento de adsorção sobre superfícies modelos carregadas, em diferentes condições de pH e de força iônica, foram importantes para explicar tanto dos fenômenos de adsorção, envolvendo fibras celulósicas e polianfótero, quanto o seu efeito na resistência mecânica do papel. Foi observado que a solubilidade do polímero aumenta à medida que o pH se distancia do seu ponto isoelétrico, pHPIE 7,3, e reduz para valores de pH próximos ao pHPIE. O tamanho das estruturas do polianfótero depende do pH do meio de dispersão. As características de tamanho do polianfótero tanto sob a forma de cadeias individuais ou quanto sob a forma de agregados, foram medidas através da técnica de espalhamento dinâmico de luz. As propriedades viscoelásticas das camadas adsorvidas e a quantidade de polímero adsorvida foram medidas através da técnica da balança microgravimétrica com dissipação de energia. Estas duas determinações, associadas às imagens no microscópio de força atômica, foram importantes para o entendimento dos resultados práticos do uso do polianfótero como agente de resistência a seco do papel. Maiores resultados de resistência do papel, avaliada através da resistência à tração, foram alcançados para valores de pH próximos ao ponto isoelétrico onde foram encontrados o seguinte: (1) maiores tamanhos para as estruturas do polímero em solução, (2) maior quantidade de massa nas camadas adsorvidas e (3) a formação de camadas mais viscoelásticas. O fenômeno de separação de fases, associado à mudança da solubilidade do polímero em solução devido ao balanço dos grupos positivos e negativos ionizados ao longo da faixa de pH estudada, foi considerado o principal aspecto para a variação em tamanho dos agregados. Embora este polímero tenha apresentado comportamento antipolieletrólito devido à expansão da sua cadeia e ao aumento da densidade de carga com o aumento da força iônica, considerando o efeito da força iônica para pH 4,3, o comportamento de adsorção do polianfótero foi avaliado como o comportamento de um polieletrólito monocarregado de alta densidade de carga. Maiores e menores quantidades de massas adsorvidas foram encontradas para valores intermediários e extremos de força iônica, respectivamente. As interações eletrostáticas foram consideradas as principais responsáveis pela adsorção do polímero sobre superfícies carregadas. Entretanto, a blindagem de cargas foi considerada a explicação para os baixos valores de massa adsorvida para valores mais elevados de força iônica. / A cationic polyelectrolyte (polyamine), with low molecular weight and high charge density, usually applied as anionic trash coagulant, was used for the retention and drainage studies in the papermaking. The use of sodium carboxymethyl cellulose to simulate the anionic trash content and its effect on the filler retention was an important feature of the work. It could be noted that the increasing of the cationic polymer dosage improves both the filler retention, evaluated by the turbidity of the filtrate, and the system drainage, evaluated by the flow speed. However, high dosages of this polymer compromised the results of these parameters due to the reversal of the system charge. It can also be confirmed that excessive shear forces affect the filler retention. Furthermore, a polyampholyte, with high molecular weight and charge density, containing positive (N-[3-(N,N- dimethylamino)propyl]acrylamide), negative (methylene butanedioic acid), and neutral (acrylamide) groups in the same chain, was tested as a dry strength agent. All of the studies at molecular level concerning to the polyampholyte behavior in the solution and its adsorption behavior on charged model surfaces at different conditions of pH and ionic strength, were important to explain both the adsorption phenomena, involving cellulosic fibers and polyampholyte, and its impact on the paper strength. It was observed that the polymer solubility increases as the pH moves away from its isoelectric point, pHIEP 7.3, and decreases when the pH approaches close to pHIEP. The sizes of the structures of the polyampholytes depend on the pH of the dispersion medium. Also the size characteristics of polyampholyte, both in individual and aggregated forms, were measured by dynamic light scattering technique. The viscoelastic properties of adsorbed layers, as well as the amount of the adsorbed polymer, were measured by quartz crystal microbalance technique with energy dissipation. These two measurements, associated with the atomic force microscopy images, were important to understand the practical results of polyampholyte usage as a dry strength agent. Best results of paper strength, evaluated by paper strength index, were achieved at pH close to the isoelectric point on which one were found the following features: (1) larger sizes of the polymer structures in solution, (2) higher amount of mass in the adsorbed layers, and (3) the formation of more viscoelastic layers. The phase separation phenomenon, associated with the change in the solubility of the polymer due to the balance of the positive and negative groups throughout the studied pH range, was considered the main aspect for the variation in size of the aggregates. Although this polymer shows antipolyelectrolyte behavior due to the expansion of the its chain and the increasing in charge density with the ionic strength, considering the effect of ionic strength at pH 4.3, the adsorption behavior of polyampholyte was evaluated as a monocharged polyelectrolyte behavior with high charge density. Major and minor amounts of adsorbed masses were found for intermediates and extremes values of ionic strength, respectively. The electrostatic interactions were considered the main cause of the adsorption on charged surfaces. However, the electrostatic screening was considered the explanation for the low values of adsorbed mass at higher values of ionic strength.