Master’s Thesis deals with obtaining electricity from the vibrations of the surrounding environment through piezoelectric vibration generator. To simulation piezoceramics and design mechanical parts of the generator was used simulation program ANSYS 10.0. First, parameters of the designed piezoelectric generator were numerically calculated, and then these values were compared with the real sample. Further work is in the description of material properties of piezo materials.

This work deals with the power supply of wireless sensors. When using a wireless sensor is desirable application of alternative energy sources, because the primary cells or batteries may reduce the extent or length of service of the sensor itself. Ambient energy can be used as a suitable alternative source. This energy must be in an appropriate form, which allows its conversion to electric energy. These appropriate, already used types include: solar en., temperature gradient en., en. of flowing liquids, vibration, etc. The advantage of vibrations is its presence in almost all mechanical systems. One of the possibilities for using the vibration of machine systems for power supply wireless sensors is using the vibration power generator with oscillating component. The generator must be designed so that its resonance frequency coincides with the frequency of vibration in the machine system. This method can be used only if the machinery system vibrations at least partially constant. Another option is to use the vibrations caused by, for example, transit transport, or different step acting factor. In this case, it is desirable that the generator is designed with variable resonant frequency, which can partly be achieved, for example, integrating several oscillating component in the body of generator. After the general analysis of the problem, graduation theses will be concerned with the possibility of use of energy from the short damped oscillation and step impulse. Focusing on a proposal of multi-element structures.

This work is focusing on analysis of current development in energy harvesting projects in aerospace industry field, and on analysis of current development in vibration generator field. It is also concentrating on establishment of a complex simulation model of vibration generator. It deals with modeling of magnetic field of generator and its cross connection with a mechanic and an electronic model.

Tato diplomová práce se zabývá vývojem autonomního zdroje elektrické energie založeného na MEMS termoelektrickém generátoru. Uvažovaný generátor bude následně použit pro napájení autonomní senzorické jednotky pro letecké aplikace. Systémový pohled na autonomní senzorickou jednotku zahrnuje senzor se zpracováním a přenosem dat, energy harvester (termoelektrický generátor), power management, akumulační prvek a autodiagnostiku. Všechny výše uvedené komponenty jsou v práci podrobně popsány. V úvodu práce je provedena široká rešerše existujících termoelektrických generátorů pro letecké aplikace. Následně jsou popsány základní teoretické poznatky z oblasti DC/DC měničů pro energy harvesting. Zvláštní pozornost je věnována metodám MPPT (Maximum Power Point Tracking). Jako základ pro vývoj napájení autonomní senzorické jednotky bylo provedeno množství simulací za pomoci nástroje MATLAB/Simulink Simscape. Pro identifikaci prametrů modelu posloužilo měření na speciálním přípravku. Praktická implementace teoreticky popsaných problémů je provedena na k tomuto účelu navrženém technologickém demonstrátoru. Závěrem je zhodnocena reálná využitelnost navržené technologie pro finální aplikaci v leteckém průmyslu.

This master's thesis deals with the development and verification of the model of the piezoelectric generator, incl. determination of its parameters. This mathematical model should be used as a tool for development of new devices, especially for analysis of applicability of available energy source (vibration) and for design of device itself. At first the review of energy harvesting is described deeply. Subsequently piezoelectric generators and the ways how we can model them, are depicted in details. The methodology of parameters estimation and model development is presented in state space or in MATLAB/Simulink environment and applied on the commercial generator Midé V21BL. A device has been made within the scope of the thesis, which can be used as an universal tool in experiments with generator. Finally the model is applied on the analysis of energy yield from man's walk and there is also brief introduction to model modifications.

Předložená disertační práce řeší komplexní mechatronický návrh autonomního termoelektrického zdroje energie pro letecké aplikace. Na základě dostupných zdrojů a literatury práce popisuje současný stav problematiky. V práci jsou prezentovány simulační modely MEMS termoelektrických článků, které jsou ověřeny experimentálním testováním a hodnotami dostupnými od výrobce. Na základě metodiky model-besed design byly navrženy a vyrobeny tři demonstrátory. Jejich vlastnosti byly testovány v reálných podmínkách na letecké pohonné jednotce.

This thesis is focused on design of piezoelectric energy harvester with additional nonlinear stiffness. Linear generator has very narrow resonance frequency bandwidth. It makes the resonance mechanism very sensitive to tuning up of the resonance frequency and it can be tuned only for one narrow vibration peak. The main idea for using of the vibration energy harvester with nonlinear stiffness is to make resonance frequency bandwidth wider, so the generator will be useable for more excitation frequencies. In this thesis is used generator Midé V21BL and additional nonlinear stiffness is realized with permanent magnets.

Cette thèse s’inscrit dans un contexte d’activité en forte croissance dans le domaine des implants médicaux, stimulée par de nombreux progrès dans le domaine des micro-capteurs et de la micro-électronique. L’autonomie en énergie des implants demeure cependant un facteur limitant. Notre travail a pour objectif de repousser les limites actuelles en termes de miniaturisation et de durée de vie. Il contribue au développement d’une solution basée sur la récupération d’énergie mécanique du cœur pour alimenter durablement un pacemaker miniaturisé sans sonde de nouvelle génération, dit « pacemaker leadless ».Le microsystème de récupération d’énergie étudié est composé d’un résonateur mécanique de type masse-ressort associé à un transducteur électrostatique. Il a pour particularité une architecture tridimensionnelle, dont la forme permet de profiter au maximum de l’espace disponible dans la capsule cylindrique du pacemaker. L'utilisation de la troisième dimension associée à un design original permet en outre d’obtenir un effet de pseudo multiplication de fréquence qui doit conduire, d’après les modèles que nous avons développés, à des densités de puissance nettement supérieures à celles présentées dans l'état de l'art. Pour réaliser ce microsystème tridimensionnel, nous avons développé un procédé de fabrication additif qui repose sur des étapes de micro moulage d'un matériaux structurel obtenu par croissance électrolytique (nickel), de croissance d'un matériau sacrificiel (cuivre) et de polissage. L’identification d’imperfections géométriques dues au procédé et aux matériaux utilisés nous a amené à améliorer la conception du transducteur. Par ailleurs, de nombreux verrous de fabrication ont été levés au cours de cette thèse grâce à la mise en œuvre d’une instrumentation dédiée. Ce procédé nous a permis de fabriquer un premier prototype tridimensionnel du micro-transducteur électrostatique composé de 10 couches de nickel. D’autres métaux élaborés par croissance électrolytique pourraient être envisagés pour réaliser des microsystèmes tridimensionnels, suivant les besoins de l’application considérée. Afin d’anticiper d’éventuels problèmes de compatibilité des micro-dispositifs avec l'imagerie par résonance magnétique, nous avons mis au point le procédé de croissance électrolytique d’un matériau non-magnétique à base de nickel dopé au phosphore. / This thesis contributes to the medical implants field, which is stimulated by many advances in the fields of microelectronics and microsensors. However, electrical energy lifespan of implants and large size of batteries are still a problem. Our work aims at pushing back these limits. It contributes to the development of a solution based on mechanical energy harvesting from the heart motion. The objective is to sustainably power a new generation of pacemakers without lead, so-called "leadless pacemakers."The studied energy harvesting microsystem consists in a spring-mass-type mechanical resonator associated with an electrostatic transducer. Its originality comes from a three-dimensional architecture, whose shape fits pretty well with the cylindrical shape of the pacemaker capsule. The use of the third dimension combined with an original design enables to get a pseudo multiplication frequency effect. Thanks to this effect, our simulation models predict power densities significantly higher than state-of-the-art figures reported in literature. To fabricate this three-dimensional microsystem, we have developed an additive manufacturing process based on steps of micro-molding of a structural material (electroplated nickel), electroplating of a sacrificial material (copper) and planarization. Identification of imperfections related to the fabrication process and the materials used allowed us to improve the design of the transducer. Moreover, many manufacturing obstacles were overcome during this thesis through the implementation of dedicated instrumentation. This new process has enabled us to fabricate a first three-dimensional prototype of the electrostatic micro-transducer made of 10 layers of nickel. Other electroplated metals can be envisaged to achieve three-dimensional microsystems, depending on the application requirements. In order to anticipate any compatibility issue of our microsystem with magnetic resonance imaging, we have developed the electrodeposition process of a nonmagnetic material: phosphorous doped nickel.

Dans le cadre de cette thèse de doctorat, nous présentons la conception et la réalisation d’un banc dédié à l’étude de la fiabilité de structures piézoélectriques et plus précisément des micro-dispositifs de récupération d'énergie destinés aux implants médicaux autonomes actifs (stimulateurs cardiaques de nouvelle génération). Les structure étudiées se présentent sous la forme d’un bimorphe piézoélectrique encastré-libre comportant une masse sismique à leur extrémité. Une bonne compréhension du vieillissement des matériaux et des modes de défaillance mécanique et électrique est essentielle pour ce type de système où la vie du patient au sein duquel est implanté le dispositif est directement mise en jeu. Pour étudier la fiabilité et la durabilité de la partie active du récupérateur, nous proposons d'établir une nouvelle méthodologie de vieillissement accélérée via un banc d'essai dédié où l'environnement et les stimuli peuvent être contrôlés avec précision sur une large période de temps. Une caractérisation électromécanique des structures est périodiquement réalisée via l’extraction d’une série d’indicateurs (force de blocage, raideur, tension en régime harmonique) au sein même du banc tout au long du vieillissement. Il est donc ainsi possible d'identifier les différents modes de défaillance potentiels et d’étudier leurs impacts sur le bon fonctionnement du système. / Within the framework of this PhD we present the design and realization of a bench dedicated to the study of the reliability of piezoelectric structures and more precisely micro-devices of energy harvesting for the new generation of active and autonomous medical implants. The structures studied are in the form of a free-clamped piezoelectric bimorph having a seismic mass at their tip. A good understanding of the aging of the materials and of the mechanical and electrical failure modes is essential for this type of system where the life of the patient implanted by this device is directly involved. To study the reliability and durability of the active part of the harvester, we propose to establish a new accelerated aging methodology via a dedicated test bench where the environment and stimuli can be controlled accurately over a large period of time. An electromechanical characterization of the structures is periodically carried out by the extraction of a series of indicators (blocking force, stiffness, tension in harmonic regime) within the bench throughout the aging process. Therefore it is possible to identify the different potential failure modes and to study their impact on the proper functioning of the system.

<div>Recently, energy crisis and environment pollution has become global issues and there is a great demand for developing green and renewable energy system. At the same time, advancements in materials production, device fabrication, and flexible circuit has led to the huge prosperity of wearable devices, which also requires facile and efficient approaches to power these ubiquitous electronics. Piezoelectric nanogenerators and triboelectric nanogenerators have attracted enormous interest in recent years due to their capacity of transferring the ambient mechanical energy into desired electricity, and also the potential of working as self-powered sensors. However, there still exists some obstacles in the aspect of materials synthesis, device fabrication, and also the sensor performance optimization as well as their application exploration.</div><div>Here in this research, several different materials possessing the piezoelectric and triboelectric properties (selenium nanowires, tellurium nanowires, natural polymer hydrogel) have been successfully synthesized, and also a few novel manufacturing techniques (additive manufacturing) have been implemented for the fabrication of wearable sensors. The piezoelectric and triboelectric nanogenerators developed could effectively convert the mechanical energy into electricity for an energy conversion purpose, and also their application as self-powered human-integrated sensors have also been demonstrated, like achieving a real-time monitoring of radial artery pulses. Other applications of the developed sensors, such as serving as electric heaters and infrared cloaking devices are also presented here. This research is expected to have a positive impact and immediate relevance to many societally pervasive areas, e.g. energy and environment, biomedical electronics, and human-machine interface.</div><div><br></div>