De nouveaux complexes allyl-borohydrure de terres rares trivalents, RE(BH4)2(C3H5)(THF)x (RE = Sc, x = 2; Y, La, Nd, Sm, x = 3) ont été synthétisés. Les complexes ont été caractérisés, y compris par diffraction des rayons X, et leur réactivité vis-à-vis de l’insertion de petites molécules organiques est décrite, qui met en jeu de façon comparative les liaisons métal-borohydrure et métal-allyle. Dans ce travail de thèse, il a été montré que le complexe de néodyme est capable d’amorcer la polymérisation de l’isoprène, seul ou combiné avec un co-catalyseur de type magnésium, conduisant à du trans-1,4-polyisoprène avec une bonne activité. Cette famille de complexes est également très active en polymérisation par ouverture de cycle des esters cycliques tels que l’ɛ-caprolactone et le L-lactide, avec amorçage de la réaction via le ligand borohydrure plutôt que l'allyle. La copolymérisation statistique L-lactide/ɛ-caprolactone a été réalisée, conduisant à la formation de copolymères avec une large gamme de microstructures, de statistique à alternée. Une autre approche organométallique a été abordée avec la synthèse de nouveaux complexes borohydrures de terres rares (Sc, Y, Nd) à base de ligands Phosphasalen. Certains de ces complexes ont été isolés et caractérisés. / A series of new trivalent rare earth allyl-borohydride complexes with the formula RE(BH4)2(C3H5)(THF)x (RE = Sc, x = 2; Y, La, Nd, Sm, x = 3) was synthesized. The complexes were fully characterized including by X-ray and their reactivity toward small organic molecules insertion is described, which involves comparatively metal-borohydride and metal-allyl bonds. In this dissertation, It was shown that the neodymium congener could initiate isoprene polymerisation, as single component or combined with a magnesium co-catalyst, to afford trans-1,4-polyisoprene with good activity. All the complexes were also found extremely active toward the Ring-Opening Polymerisation of ɛ-caprolactone and L-lactide with initiation through the borohydride rather than the allyl moiety. The statistical copolymerisation of L-lactide and ɛ-caprolactone was successfully performed with all complexes affording copolymers with a wide range of microstructure, from random to fairly alternating. Another organometallic approach has been studied with the synthesis of novel rare earth (Sc, Y, Nd) borohydride complexes based on Phosphasalen ligands. Some of these complexes have been isolated and characterized.

Reproduction de : Thèse doctorat : Chimie des matériaux : Reims : 2007. / Titre provenant de l'écran titre. Bibliogr. p. 174-188.

L'objectif de cette thèse est d’encapsuler l'indométacine dans des nanoparticules polymériques en association à l’huile essentielle de Nigella Sativa L. extraite à partir de ses graines afin d’optimiser son utilisation par voie cutanée et potentialiser son activité anti-inflammatoire.Pour ce faire, des nanoparticules à base de poly-epsilon-caprolactone ont été préparées par nanoprécipitation. Une étude systématique a été menée pour comprendre l'effet de la variation des paramètres de préparation sur les propriétés colloïdales des nanoparticules obtenues. Une fois les différents paramètres optimisés, l'indométacine et l'huile essentielle de Nigella Sativa L. ont été encapsulées séparément dans les nanoparticules polymériques. Puis, l’ensemble, indométacine et huile essentielle de Nigella Sativa L. a été encapsulé. Les nanoparticules préparées ont à chaque fois été caractérisées notamment en termes de stabilité et de performance d’encapsulation. Ensuite, nous avons mené une étude ex vivo et in vivo des nanoparticules obtenues afin d’évaluer le potentiel de pénétration cutanée d’une part, et le potentiel clinique dans la prise en charge de l’inflammation / The objective of this PhD thesis was to extract the Nigella Sativa L. Seeds Essential Oil and its encapsulation together with indomethacin within polymeric nanoparticles in order to reduce taken amount and to enhance indomethacin cutaneous penetration, and anti-inflammatory activity. To this direction poly-epsilon-caprolactone based nanoparticles were designed using nanoprecipitation method. A systematic study was performed to figure out the effect of process and formulation parameters on the characteristics of obtained nanoparticles. Once the effects of all parameters were studied, then indomethacin and Nigella Sativa L. Seeds Essential Oil was encapsulated separately. Consequently, both together indomethacin and Nigella Sativa L. Seeds Essential Oil was encapsulated. Then prepared nanoparticles were characterized in terms of stability, encapsulation efficiency. In addition, ex vivo skin penetration and in vivo anti-inflammatory activity of designed nanoparticles was investigated

Para a produção de compósitos multifuncionais crescente atenção tem sido dada a uma homogeneização eficaz de hidroxiapatitas em matrizes poliméricas, buscando uma sintonia fina da concentração entre polímeros biodegradáveis e biocerâmicas. Este trabalho dedicou-se a síntese, caracterização e estudo das propriedades biológicas do híbrido hidroxiapatita / poli(ε-aprolactona) estrela. A hidroxiapatita nanométrica (HAPN) foi revestida com o polímero biodegradável poli(ε -caprolactona) de topologia em estrela de três braços (PCLE). O uso de um polímero com topologia ramificada visa alterar algumas de suas propriedades mecânicas, a adesão interfacial à cerâmica, a sua viscosidade, o volume hidrodinâmico e sua cinética de degradação. O desempenho do híbrido HAPN/PCLE foi comparado com os materiais: HAP com partículas micrométricas (HAP-91 material comercial), o seu compósito revestido com PCLE (HAP-91/PCLE) e uma cerâmica nanométrica bifásica hidroxiapatita/β-TCP (HAP-8). Os materiais foram caracterizados por avaliações físico-químicas e biológicas realizadas por estudos de citotoxicidade, adsorção de proteínas, proliferação celular, atividade de fosfatase alcalina. A síntese de PCLE foi verificada por análise espectroscópica (espectroscopia no infravermelho-FTIR; ressonância magnética nuclear de prótons- 1H-RMN e carbono- 13C-RMN; a matriz assistida por desorção a laser / ionização; MALDI-TOF; e cromatografia de permeação em gel (GPC). O revestimento das biocerâmicas por PCLE foi confirmado por técnicas de microscopia eletrônica de transmissão (MET) e de varredura (MEV). Os compósitos mostraram uma melhor trababilidade em relação à cerâmica pura e são menos quebradiços, possivelmente devido à presença do PCLE na interface da biocerâmica. A análise de MEV e MET mostrou um aspecto de continuidade no contorno das partículas de cerâmica, em micro e nano-escala. Os compósitos apresentam comportamento não citototóxico e propiciaram um crescimento de células de mamíferos. A proliferação de células osteoblásticas (MG -63) foi significativamente mais elevada para o compósito HAPN/PCLE em comparação com outros biomateriais, sugerindo influência da área de superfície na adesão e proliferação de células. O estudo do ângulo de contato indicou que o revestimento com PCLE faz com que a superfície da biocerâmica seja mais hidrofóbica. O estudo com radioisótopos indicou que o revestimento da biocerâmica com PCLE altera significativamente a adsorção das proteínas do sangue fibrinogênio e albumina. O processo de regeneração do tecido ósseo foi estudado em condições in vivo com a implantação de pastilhas dos materiais estudados em tíbias de coelho. Os resultados mostraram que os compósitos podem ser utilizados como biomaterial, pois houve neoformação óssea ao redor dos implantes. / For the production of multifunctional composites in the combination of biodegradable polymers and bioceramics, increasing attention has been paid to an effective homogenization of hydroxyapatite within polymer matrices and a fine tuning of the concentration. This work was dedicated to the synthesis, characterization and study of the biological properties of the hybrid star poly(ε-caprolactone)/hydroxyapatite composites. A nanometer hydroxyapatite (HAPN) was coated with the biodegradable polymer poly (ε-caprolactone) with three arms star topology (PCLE). The use of polymer branched topology aims to change some of its mechanical properties, the interfacial adhesion to ceramic, its viscosity, the hydrodynamic volume and its degradation kinetics. The performance of the hybrid HAPN/PCLE was compared with the other three materials: HAP commercial micrometric particles (HAP-91), their composite coated with PCLE (HAP-91/PCLE) and a biphasic ceramic nanohydroxyapatite/β-TCP (HAP-8). All materials were characterized by different physico-chemical and biological evaluations performed by cytotoxicity studies, protein adsorption, cell proliferation, alkaline phosphatase activity and an in vivo studies. The synthesis of PCLE was verified by spectroscopic analysis (Fourier-Transform infrared-FTIR and nuclear magnetic resonance-1H-NMR/13C-NMR), matrix-assisted laser desorption/ionization (MALDI-TOF) and gel permeation chromatography (GPC). The coating of the bioceramics by PCLE was confirmed by microscopy techniques transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The composites showed better easy handling in relation to pure ceramic and are less brittle, possibly due to the presence of PCLE at bioceramic interface. The SEM and TEM analysis showed an aspect of continuity in the contour of the ceramic particles, both in micro and nanoscale. The composites exhibit non cytotoxicity behavior and propitiated mammalian cell growth. The proliferation of osteoblastic cells (MG-63) was significantly higher for the composite HAPN/PCLE compared to other biomaterials, suggesting influences of the surface area on the cell adhesion and proliferation. The study of contact angle indicated that the PCLE coating makes the bioceramic surfaces more hydrophobic. The radioisotopic studies indicates that the coating of bioceramics with PCLE significantly alter the adsorption of blood proteins fibrinogen and albumin. The process of regeneration of bone tissue was studied in in vivo conditions after implantation of implants manufactured from composites in rabbit´s tibias. The results showed that composites can be used as biomaterial since the newly bone grew around the implants.

Para a produção de compósitos multifuncionais crescente atenção tem sido dada a uma homogeneização eficaz de hidroxiapatitas em matrizes poliméricas, buscando uma sintonia fina da concentração entre polímeros biodegradáveis e biocerâmicas. Este trabalho dedicou-se a síntese, caracterização e estudo das propriedades biológicas do híbrido hidroxiapatita / poli(ε-aprolactona) estrela. A hidroxiapatita nanométrica (HAPN) foi revestida com o polímero biodegradável poli(ε -caprolactona) de topologia em estrela de três braços (PCLE). O uso de um polímero com topologia ramificada visa alterar algumas de suas propriedades mecânicas, a adesão interfacial à cerâmica, a sua viscosidade, o volume hidrodinâmico e sua cinética de degradação. O desempenho do híbrido HAPN/PCLE foi comparado com os materiais: HAP com partículas micrométricas (HAP-91 material comercial), o seu compósito revestido com PCLE (HAP-91/PCLE) e uma cerâmica nanométrica bifásica hidroxiapatita/β-TCP (HAP-8). Os materiais foram caracterizados por avaliações físico-químicas e biológicas realizadas por estudos de citotoxicidade, adsorção de proteínas, proliferação celular, atividade de fosfatase alcalina. A síntese de PCLE foi verificada por análise espectroscópica (espectroscopia no infravermelho-FTIR; ressonância magnética nuclear de prótons- 1H-RMN e carbono- 13C-RMN; a matriz assistida por desorção a laser / ionização; MALDI-TOF; e cromatografia de permeação em gel (GPC). O revestimento das biocerâmicas por PCLE foi confirmado por técnicas de microscopia eletrônica de transmissão (MET) e de varredura (MEV). Os compósitos mostraram uma melhor trababilidade em relação à cerâmica pura e são menos quebradiços, possivelmente devido à presença do PCLE na interface da biocerâmica. A análise de MEV e MET mostrou um aspecto de continuidade no contorno das partículas de cerâmica, em micro e nano-escala. Os compósitos apresentam comportamento não citototóxico e propiciaram um crescimento de células de mamíferos. A proliferação de células osteoblásticas (MG -63) foi significativamente mais elevada para o compósito HAPN/PCLE em comparação com outros biomateriais, sugerindo influência da área de superfície na adesão e proliferação de células. O estudo do ângulo de contato indicou que o revestimento com PCLE faz com que a superfície da biocerâmica seja mais hidrofóbica. O estudo com radioisótopos indicou que o revestimento da biocerâmica com PCLE altera significativamente a adsorção das proteínas do sangue fibrinogênio e albumina. O processo de regeneração do tecido ósseo foi estudado em condições in vivo com a implantação de pastilhas dos materiais estudados em tíbias de coelho. Os resultados mostraram que os compósitos podem ser utilizados como biomaterial, pois houve neoformação óssea ao redor dos implantes. / For the production of multifunctional composites in the combination of biodegradable polymers and bioceramics, increasing attention has been paid to an effective homogenization of hydroxyapatite within polymer matrices and a fine tuning of the concentration. This work was dedicated to the synthesis, characterization and study of the biological properties of the hybrid star poly(ε-caprolactone)/hydroxyapatite composites. A nanometer hydroxyapatite (HAPN) was coated with the biodegradable polymer poly (ε-caprolactone) with three arms star topology (PCLE). The use of polymer branched topology aims to change some of its mechanical properties, the interfacial adhesion to ceramic, its viscosity, the hydrodynamic volume and its degradation kinetics. The performance of the hybrid HAPN/PCLE was compared with the other three materials: HAP commercial micrometric particles (HAP-91), their composite coated with PCLE (HAP-91/PCLE) and a biphasic ceramic nanohydroxyapatite/β-TCP (HAP-8). All materials were characterized by different physico-chemical and biological evaluations performed by cytotoxicity studies, protein adsorption, cell proliferation, alkaline phosphatase activity and an in vivo studies. The synthesis of PCLE was verified by spectroscopic analysis (Fourier-Transform infrared-FTIR and nuclear magnetic resonance-1H-NMR/13C-NMR), matrix-assisted laser desorption/ionization (MALDI-TOF) and gel permeation chromatography (GPC). The coating of the bioceramics by PCLE was confirmed by microscopy techniques transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The composites showed better easy handling in relation to pure ceramic and are less brittle, possibly due to the presence of PCLE at bioceramic interface. The SEM and TEM analysis showed an aspect of continuity in the contour of the ceramic particles, both in micro and nanoscale. The composites exhibit non cytotoxicity behavior and propitiated mammalian cell growth. The proliferation of osteoblastic cells (MG-63) was significantly higher for the composite HAPN/PCLE compared to other biomaterials, suggesting influences of the surface area on the cell adhesion and proliferation. The study of contact angle indicated that the PCLE coating makes the bioceramic surfaces more hydrophobic. The radioisotopic studies indicates that the coating of bioceramics with PCLE significantly alter the adsorption of blood proteins fibrinogen and albumin. The process of regeneration of bone tissue was studied in in vivo conditions after implantation of implants manufactured from composites in rabbit´s tibias. The results showed that composites can be used as biomaterial since the newly bone grew around the implants.

Surface behavior of poly (epsilon-caprolactone) (PCL) have been studied at the air/water interface (A/W). PCL is a hydrophobic and crystalline polyester with a glass transition temperature around -60 degrees centigrade, a melting point around 55 degrees centigrade, excellent biocompatibility, and low toxicity. In the past decade, PCL based systems have attracted considerable interest for controlled-release drug delivery and as scaffolds for tissue engineering, that require a fundamental understanding of PCL's degradation mechanisms and crystallization properties. PCL spherulites were commonly observed in previous bulk studies. This thesis focuses on PCL crystallization in Langmuir monolayers. Brewster angle microscopy (BAM) studies show that square, distorted rectangular, and dendritic crystals form at the A/W interface. While dendritic structures have been observed in poly (ethylene oxide) (PEO) thin film on solid substrates, this study of PCL is the first time that dendritic morphologies have been observed at the A/W interface for a linear flexible-coil polymer. As far as we know, the crystallization of flexible-coil polymers at the A/W interface is a brand new area of research. These findings may provide an interesting model system for studying crystallization in confined geometries and the effect of crystallinity on enzyme catalyzed hydrolysis of this important biodegradable polymer at the A/W interface. The main objectives of this thesis were to investigate the phase behavior of PCL at the A/W interface, gain a deeper understanding of the nucleation and growth mechanism of PCL crystallization at the A/W interface through surface pressure-area isotherms and isobaric area relaxation analyses, and interpret the effects of molecular weight on the nucleation and growth mechanism, and morphologies of semicrystalline PCL crystallized in Langmuir monolayers at the A/W interface. / Master of Science

Polymeric bone scaffolds are a promising tissue engineering approach for the repair of critical-size bone defects. Porous three-dimensional (3D) scaffolds play an essential role as templates to guide new tissue formation. However, there are critical challenges arising from the poor mechanical properties and low bioactivity of bioresorbable polymers, such as poly(epsilon-caprolactone) (PCL) in bone tissue engineering applications. This research investigates the potential use of cellulose nanocrystals (CNCs) as multi-functional additives that enhance the mechanical properties and increase the biomineralization rate of PCL. To this end, an in vitro biomineralization study of both sulfuric acid hydrolyzed-CNCs (SH-CNCs) and surface oxidized-CNCs (SO-CNCs) has been performed in simulated body fluid in order to evaluate the bioactivity of the surface functional groups, sulfate and carboxyl groups, respectively. PCL nanocomposites were prepared with different SO-CNC contents and the chemical/physical properties of the nanocomposites were analyzed. 3D porous scaffolds with fully interconnected pores and well-controlled pore sizes were fabricated from the PCL nanocomposites with a 3D printer. The mechanical stability of the scaffolds were studied using creep test under dry and submersion conditions. Lastly, the biocompatibility of CNCs and 3D printed porous scaffolds were assessed in vitro. The carboxyl groups on the surface of SO-CNCs provided a significantly improved calcium ion binding ability which could play an important role in the biomineralization (bioactivity) by induction of mineral formation for bone tissue engineering applications. In addition, the mechanical properties of porous PCL nanocomposite scaffolds were pronouncedly reinforced by incorporation of SO-CNCs. Both the compressive modulus and creep resistance of the PCL scaffolds were enhanced either in dry or in submersion conditions at 37 degrees Celsius. Lastly, the biocompatibility study demonstrated that both the CNCs and material fabrication processes (e.g., PCL nanocomposites and 3D printing) were not toxic to the preosteoblasts (MC3T3 cells). Also, the SO-CNCs showed a positive effect on biomineralization of PCL scaffolds (i.e., accelerated calcium or mineral deposits on the surface of the scaffolds) during in vitro study. Overall, the SO-CNCs could play a critical role in the development of scaffold materials as a potential candidate for reinforcing nanofillers in bone tissue engineering applications. / Ph. D.

O poli(ε-caprolactona) (PCL) é um polímero biocompatível e biodegradável, aprovado pelo Food and Drug Administration (FDA) para ser usado como biomaterial. Diversos estudos utilizando sua forma linear ou ramificada têm demonstrado resultados promissores para seu uso no desenvolvimento de dispositivos médicos e em aplicações na área farmacêutica. O objetivo deste trabalho foi utilizar o PCL com estrutura estrelada (PCLE) para obter microesferas biorreabsorvíveis. Primeiramente realizou-se a avaliação das propriedades físico-químicas do PCLE por meio da cromatografia de permeação em gel (GPC), ressonância magnética de prótons (1H-RMN) e carbono (13C-RMN), calorimetria exploratória diferencial (DSC) e espectrometria por infravermelho com transformada de Fourier (FT-IR). A avaliação toxicológica do PCLE foi obtida por meio do ensaio de citotoxicidade utilizando células CHO-K1 e o corante vital 5-(3-carboximethoxifenil)-2-(4,5-dimetiltiazolil)-3-(4-sulfofenil) tetrazolium e do acoplador de elétrons fenazine metilssulfato (MTS/PMS). O ensaio de biodegradação foi conduzido em pH 7,4 na presença de lipase a 37 ºC. Após essas análises o PCLE foi utilizado para preparação de esferas por meio de emulsão complexa A/O/A. O PCLE foi caracterizado como um polímero de baixa massa molar, com dispersão de tamanho unimodal e cerca de 68,8 % de suas moléculas apresentaram estrutura estrelada com três braços. Em relação às propriedades térmicas o PCLE apresentou temperatura de fusão de 57,3 ºC e temperatura de transição vítrea de -54,3 ºC. A avaliação da citotoxicidade mostrou que o extrato de PCLE é compatível com o metabolismo celular. As microesferas obtidas a partir do PCLE, por emulsão A/O/A apresentaram polidispersão de tamanho. / The poly(ε-caprolactone) (PCL) is a biocompatible and biodegradable polymer which has been approved by Food and Drug Administration (FDA). Many studies that are using its linear or branched form have showed promising results for medical devices and controlled drug delivery applications. The aim of this research was the use of star-shaped PCL (PCLE) to prepare bioreabsorbable microspheres. At first, the physical-chemical properties were characterized by Gel Permeation Chromatography (GPC), Protons Resonance Magnetic Nuclear (1H-RMN), Carbon Resonance Magnetic Nuclear (13C-RMN), Differential Scanning Calorimetry (DSC) and Fourier Transformed Infrared Spectroscopy (FT-IR). The toxicological property was investigated by colorimetric assay using CHO-K1 cells and the vital dye (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) (MTS) and the electron acceptor phenazine methosulfate (PMS). The biodegradation behavior was evaluated in the presence of lipase at 37 ºC and pH 7.4. The microspheres were prepared by complex emulsion W/O/W. The PCLE was characterized as low molecular weight polymer with monomodal distribution and about 68,8 % of the molecules were three-arm branched. The melting and glass transition temperatures were 57.3 ºC and -54.3 ºC, respectively. The cytotoxicity evaluation showed that PCLE extract was cell compatible. The obtained microspheres showed diameter polydispersity.

O poli(ε-caprolactona) (PCL) é um polímero biocompatível e biodegradável, aprovado pelo Food and Drug Administration (FDA) para ser usado como biomaterial. Diversos estudos utilizando sua forma linear ou ramificada têm demonstrado resultados promissores para seu uso no desenvolvimento de dispositivos médicos e em aplicações na área farmacêutica. O objetivo deste trabalho foi utilizar o PCL com estrutura estrelada (PCLE) para obter microesferas biorreabsorvíveis. Primeiramente realizou-se a avaliação das propriedades físico-químicas do PCLE por meio da cromatografia de permeação em gel (GPC), ressonância magnética de prótons (1H-RMN) e carbono (13C-RMN), calorimetria exploratória diferencial (DSC) e espectrometria por infravermelho com transformada de Fourier (FT-IR). A avaliação toxicológica do PCLE foi obtida por meio do ensaio de citotoxicidade utilizando células CHO-K1 e o corante vital 5-(3-carboximethoxifenil)-2-(4,5-dimetiltiazolil)-3-(4-sulfofenil) tetrazolium e do acoplador de elétrons fenazine metilssulfato (MTS/PMS). O ensaio de biodegradação foi conduzido em pH 7,4 na presença de lipase a 37 ºC. Após essas análises o PCLE foi utilizado para preparação de esferas por meio de emulsão complexa A/O/A. O PCLE foi caracterizado como um polímero de baixa massa molar, com dispersão de tamanho unimodal e cerca de 68,8 % de suas moléculas apresentaram estrutura estrelada com três braços. Em relação às propriedades térmicas o PCLE apresentou temperatura de fusão de 57,3 ºC e temperatura de transição vítrea de -54,3 ºC. A avaliação da citotoxicidade mostrou que o extrato de PCLE é compatível com o metabolismo celular. As microesferas obtidas a partir do PCLE, por emulsão A/O/A apresentaram polidispersão de tamanho. / The poly(ε-caprolactone) (PCL) is a biocompatible and biodegradable polymer which has been approved by Food and Drug Administration (FDA). Many studies that are using its linear or branched form have showed promising results for medical devices and controlled drug delivery applications. The aim of this research was the use of star-shaped PCL (PCLE) to prepare bioreabsorbable microspheres. At first, the physical-chemical properties were characterized by Gel Permeation Chromatography (GPC), Protons Resonance Magnetic Nuclear (1H-RMN), Carbon Resonance Magnetic Nuclear (13C-RMN), Differential Scanning Calorimetry (DSC) and Fourier Transformed Infrared Spectroscopy (FT-IR). The toxicological property was investigated by colorimetric assay using CHO-K1 cells and the vital dye (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) (MTS) and the electron acceptor phenazine methosulfate (PMS). The biodegradation behavior was evaluated in the presence of lipase at 37 ºC and pH 7.4. The microspheres were prepared by complex emulsion W/O/W. The PCLE was characterized as low molecular weight polymer with monomodal distribution and about 68,8 % of the molecules were three-arm branched. The melting and glass transition temperatures were 57.3 ºC and -54.3 ºC, respectively. The cytotoxicity evaluation showed that PCLE extract was cell compatible. The obtained microspheres showed diameter polydispersity.

L'ostéoporose est la maladie métabolique la plus fréquente qui touche l'os. Plusieurs substances actives sont utilisées pour le traitement pharmacologique de cette maladie. Cependant, ce sont les bisphosphonates et surtout l'alendronate de sodium, qui sont prescrits en première intention. L'alendronate de sodium est, en effet, très efficace mais présente une faible absorption quand il est administré par la voie orale. Sa solubilité dans l'eau est de 20 mg/ml. Il présente en outre une faible biodisponibilité (de 0,6 à 0,7%). Cette substance active est aussi à l'origine d'effets indésirables d'irritation au niveau de l'oesophage, l'estomac et l'intestin. Ces effets sont dus à un contact local des cristaux de la substance active avec la muqueuse. L'approche d'encapsulation des substances actives dans des particules polymériques a permis d'obtenir plusieurs bénéfices thérapeutiques comme l'amélioration de la biodisponibilité et la diminution des effets indésirables. Dans la première partie de notre étude, on a réalisé l'encapsulation de l'alendronate dans des nanoparticules à base de poly-epsilon-caprolactone en utilisant la nanoprécipitation et l'émulsion double. Les nanoparticules obtenues ont une forme sphérique et une taille comprise entre 200 et 450 nm. Le meilleur pourcentage d'encapsulation a été de 34% et il a été obtenu avec la technique d'émulsion double. Ceci confirme que cette méthode est plus adaptée à l'encapsulation des molécules hydrophiles. Le profil de libération in vitro a montré deux phases : une première phase de libération relativement rapide et une deuxième phase beaucoup plus lente. L'analyse par modélisation mathématique a montré que la libération in vitro de l'alendronate se fait par diffusion et relâchement des chaines polymériques / Osteoporosis is the most frequent metabolic disease that affects bone. Many actives have been used as pharmacological treatment of this disease. However, bisphosphonates, especially, alendronate sodium, are indicated as first line regimen. Alendronate is highly efficient but presents low absorption after oral administration. Its solubility in water is 20 mg/ml. It has also poor bioavailability (0.6-0.7%). In addition, this active could lead to many side effects, which are mainly related to the esophagus, the stomach and the intestine. Such effects are linked to a local contact of drug crystals with the mucosa. Encapsulation of active molecules allowed the obtaining of many advantages over conventional pharmaceutical forms such as, bioavailability and tolerance enhancement. In the first part of our study, we managed to encapsulate alendronate sodium in poly-epsilon-caprolactone nanoparticles via two techniques: nanoprecipitation and double emulsion. Obtained nanoparticles presented a spherical form. Their size ranged between 200 and 450 nm. The highest encapsulation efficiency value was 34% and was obtained via double emulsion technique. This confirms that double emulsion is more suitable for hydrophilic drugs encapsulation. In vitro release profile showed two phases: first phase of burst release and a second more prolonged phase. Mathematical modeling showed that alendronate in vitro release occurs by drug diffusion and polymer chain relaxation. In the second experimental part, we managed to find a more interesting alternative. In fact, we opted for the use of chitosan which is a natural hydrophilic polymer. One of the obtained advantages is the avoidance of organic solvents use. In addition, this approach allowed the enhancement of encapsulation efficiency as this value increased to 70%. The used technique is ionic gelation. It is a simple encapsulation technique that is based on the transformation of a dissolved polymer to a gel-like state