Made available in DSpace on 2014-10-09T12:42:19Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:00:09Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:42:19Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:00:09Z (GMT). No. of bitstreams: 0 / O trabalho apresenta uma aplicação da ferramenta metodológica conhecida como FMEA (Failure Mode Effect Analysis) ao processo de identificação de aspectos e impactos ambientais. Tal processo é parte importante na implantação e na manutenção de Sistemas de Gestão Ambiental (SGA), baseados na norma NBR ISO 14001. Além disso, pode contribuir, de forma complementar, para a avaliação e aperfeiçoamento da segurança nuclear da instalação analisada. Como objeto de estudo elegeu-se o Centro de Combustíveis Nucleares (CCN) do IPEN/CNEN-SP, localizado junto ao Campus da Universidade de São Paulo-Brasil, destinado à realização de pesquisas científicas e à produção de elementos combustíveis para o Reator IEA-R1. A partir de um levantamento sistemático de dados, obtidos por meio de entrevistas, documentos e registros operacionais foi possível identificar os processos, suas interações e atividades, cuja análise permitiu definir os diversos modos de falhas potenciais, as respectivas causas e conseqüências para o meio ambiente. Como resultado da avaliação criteriosa dos modos causas foi possível identificar e classificar os principais impactos ambientais potenciais, que constitui uma etapa essencial para a implantação e manutenção de um Sistema de Gestão Ambiental para a instalação em estudo. Os resultados obtidos permitiram demonstrar a validade da aplicação da técnica FMEA aos processos de instalações nucleares, identificando aspectos e impactos ambientais, cujos controles são essenciais para a obtenção da conformidade com os requisitos ambientais do Sistema de Gestão Integrada do IPEN (SGI). Contribuíram também para fornecer uma ferramenta gerencial poderosa para a solução de questões relacionadas ao processo de atendimento de exigências legais aplicáveis no âmbito da Comissão Nacional de Energia Nuclear (CNEN) e do Instituto Brasileiro do Meio Ambiente (IBAMA). / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Submitted by Maria Eneide de Souza Araujo (mearaujo@ipen.br) on 2017-03-10T15:06:09Z No. of bitstreams: 1 23000.pdf: 2483857 bytes, checksum: ba54fa302ba8e46dabc056e73e8bd8ee (MD5) / Made available in DSpace on 2017-03-10T15:06:09Z (GMT). No. of bitstreams: 1 23000.pdf: 2483857 bytes, checksum: ba54fa302ba8e46dabc056e73e8bd8ee (MD5) / Rejeitos radioativos são gerados em todas as etapas do ciclo do combustível nuclear e em instituições que fazem uso de elementos radioativos. No Brasil, para que possam atender a legislação vigente, eles devem ser devidamente gerenciados e tratados. A caracterização é a etapa do gerenciamento de rejeitos radioativos que certifica e complementa as informações presentes no documento de identificação fornecido pelo gerador dos rejeitos radioativos. O objetivo desse trabalho foi desenvolver uma metodologia para caracterização de tambores de rejeitos radioativos. Neste trabalho foi utilizada a técnica de espectrometria gama associada ao método de Monte Carlo para obter e estabelecer uma relação entre as eficiências de contagens teóricas e experimentais para quatro tambores de calibração com densidades diferentes, preparados com nove tubos de PVC em seu interior. O detector de HPGe utilizado foi posicionado em três diferentes distâncias em relação a extremidade do tambor de calibração. A utilização do método de Monte Carlo mostrou-se adequado a metodologia proposta neste trabalho. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Submitted by Pedro Silva Filho (pfsilva@ipen.br) on 2017-11-22T17:00:26Z No. of bitstreams: 0 / Made available in DSpace on 2017-11-22T17:00:26Z (GMT). No. of bitstreams: 0 / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / A demanda por combustível nuclear para reatores de pesquisa está aumentando em nível mundial, enquanto várias de suas fábricas têm pequeno volume de produção. Este trabalho estabeleceu um modelo conceitual com duas estratégias para o aumento da capacidade produtiva dessas fábricas. Foram abordadas as fábricas que produzem elementos combustíveis tipo placa carregados com LEU U3Si2-Al, tipicamente usados em reatores nucleares de pesquisa. A primeira estratégia baseia-se na literatura da área de administração da produção e é uma prática frequente nas fábricas em geral. A segunda estratégia aproveita a possibilidade de desmembrar setores produtivos, comum em instalações de produção de combustível nuclear. Ambas as estratégias geraram diferentes cenários de produção, os quais devem ser seguros em relação à criticalidade. Foram coletados dados de uma fábrica real de combustível nuclear para reatores de pesquisa. As duas estratégias foram aplicadas a esses dados com a finalidade de testar o modelo proposto, o que configurou um estudo de caso. A aplicação das estratégias aos dados coletados deu-se por meio de simulação de eventos discretos em computador. Foram criados diversos modelos de simulação para abranger todos os cenários gerados, de forma que o teste indicou um aumento da capacidade produtiva de até 207% sem necessidade de aquisição de novos equipamentos. Os resultados comprovam que o modelo atingiu plenamente o objetivo proposto. Como principal conclusão pode-se apontar a eficácia do modelo proposto, fato que foi validado pelos dados da fábrica. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP / CNPq:310274/2012-5

This diploma thesis deals with nuclear energetics and its impact to the environment. Present state of the energetics, mainly nuclear energetics, in the Czech Republic is discussed here. Also perspective of nuclear energetics is given. The thesis describes nuclear power plant waste handling and also spent nuclear fuel handling. Nuclear power plant is compared with other sources of electric energy, which are counted to the energetic mix. The author focuses on fossil fuels and also on the renewable energy sources. The amount of produced waste to the unit of produced energy, built up area, safety and economic indicators and other parameters are followed for each source of energy.

The thesis deals with the analysis of possibilities for use of III. and IV. generation of nuclear reactors for the Czech Republic. Introduction deals with basic principles of nuclear energetics and fuel cycle which is closely associated with the issue and its development and application in practice will have a significant effect both for choice of future types of nuclear reactors of IV. generation and the matter of settlement with spent nuclear fuel. In other parts the thesis deals with the present state of nuclear energetics in the Czech Republic, compares concrete chosen types of nuclear power plants of III. generation and generally describes nuclear reactors and power plants of IV. generation. Final part of the work is focused on questions concerning the possibility of construction of new blocks of nuclear power plants in the Czech Republic and presents concrete recommendation from author´s point of view.

This master‘s thesis deals with radiation damage of reactor pressure vessels, specifically of NPP Dukovany Unit No. 3. In general damage mechanisms of reactor steels are described and possibilities of monitoring of material degradation and its recovery used at NPP’s all over the world are mentioned as well. A practical part of the thesis is focused on interpretation of analyses carried out with the assistance of MOBY DICK code. The ground of these analyses is a neutron fluence value development on different locations of RPV for the whole life of operation up to 24th cycle. The analyses results are put into context with performed in-service inspections. The thesis follows up with neutron fluence computation for the future cycles containing new types of nuclear fuel up to 34th cycle. The outcome of practical part of the master‘s thesis is a comparison between new types of nuclear fuel with respect to radiation damage of RPV’s.

Actuellement, bien que la plupart des pays nucléaires converge vers la même solution technique: le stockage profond pour la gestion des déchets radioactifs de haute activité et à vie longue, les objectifs calendaires divergent d'un pays à l'autre. Grâce au calcul économique, nous souhaitons apporter des éléments de réponse à la question suivante : En termes de temporalité, comment les générations présentes, qui bénéficient de la production d'électricité nucléaire, doivent-elles supporter les charges de la gestion des déchets radioactifs en tenant compte des générations futures ? Cette thèse se propose d'analyser spécifiquement la décision française en tenant compte de son contexte. Nous proposons un ensemble d'outils qui permet d'évaluer l'Utilité du projet de stockage profond en fonction des choix de temporalité. Notre thèse étudie également l'influence en retour des choix de stockage sur le cycle du combustible nucléaire. Au-delà, nous prenons en compte les interactions entre le stockage profond et les choix de parc nucléaire et de cycle du combustible qui constituent un « système complet ». / Nowadays, the deep geological repository is generally considered as the reference solution for the definitive management of spent nuclear fuel/high-level waste, but different countries have decided different disposal deployment schedules. Via the economic calculation, we hope to offer some answers to the following question: In terms of disposal time management, how should the present generations, benefiting from the nuclear power generation, bear the costs of radioactive waste management, while taking into account future generations? This thesis proposes to analyze specifically the French decision in its context. We propose a set of tools to evaluate the Utility of the deep geological repository project according to the deployment schedule choices. Our thesis also studies the influence of disposal choices on the nuclear fuel cycle. Beyond, we also take into account the interactions between the deep geological repository, nuclear fleet and cycle choices which constitute a "complete system".

A breed-and-burn molten salt reactor (BBMSR) concept is proposed to address the Generation IV fuel cycle sustainability objective in a once-through cycle with low enrichment and no reprocessing. The BBMSR uses separate fuel and coolant molten salts, with the fuel contained in assemblies of individual tubes that can be shuffled and reclad periodically to enable high burnup. In this dual-salt configuration, the BBMSR may overcome several limitations of previous breed-and-burn (B$\&$B) designs to achieve high uranium utilisation with a simple, passively safe design. A central challenge in design of the BBMSR fuel is balancing the neutronic requirement of large fuel volume fraction for B$\&$B mode with the thermal-hydraulic requirements for safe and economically competitive reactor operation. Natural convection of liquid fuel within the tubes aids heat transfer to the coolant, and a systematic approach is developed to efficiently model this complex effect. Computational fluid dynamics modelling is performed to characterise the unique physics of the system and produce a new heat transfer correlation, which is used alongside established correlations in a numerical model. A design framework is built around this numerical model to iteratively search for the limiting power density of a given fuel and channel geometry, applying several defined temperature and operational constraints. It is found that the trade-offs between power density, core pressure drop, and pumping power are lessened by directing the flow of coolant downwards through the channel. Fuel configurations that satisfy both neutronic and thermal-hydraulic objectives are identified for natural, 5$\%$ enriched, and 20$\%$ enriched uranium feed fuel. B$\&$B operation is achievable in the natural and 5$\%$ enriched versions, with power densities of 73 W/cm$^3$ and 86 W/cm$^3$, and theoretical uranium utilisations of 300 $\mathrm{MWd/kgU_{NAT}}$ and 25.5 $\mathrm{MWd/kgU_{NAT}}$, respectively. Using 20$\%$ enriched feed fuel relaxes neutronic constraints so a wider range of fuel configurations can be considered, but there is a strong inverse correlation between power density and uranium utilisation. The fuel design study demonstrates the flexibility of the BBMSR concept to operate along a spectrum of modes ranging from high fuel utilisation at moderate power density using natural uranium feed fuel, to high power density and moderate utilisation using 20$\%$ uranium enrichment.

Au cours de ces dernières décennies, des études ont étés menées pour identifier plusieurs traceurs des matériaux du cycle du combustible nucléaire, dans le cadre de la lutte contre la prolifération nucléaire. Ces matériaux sont généralement collectés lors d’inspections dans des installations nucléaires, ou saisis lors de contrôles de trafics illicites. Les informations fournies par ces traceurs sont parcellaires et ne permettent pas de déterminer avec exactitude la provenance et l’historique industriel de ces matériaux.Le but de ce travail de thèse est de démontrer le potentiel de l’utilisation des isotopes du molybdène pour le traçage des matériaux du cycle du combustible nucléaire. Le choix s’est porté sur le molybdène car en raison de la similarité de leurs propriétés chimiques, le molybdène et l’uranium sont étroitement associés dans les minerais d’uranium et tout au long de la chaîne de purification de l’uranium. L’étude s’est focalisée sur une partie de l’amont du cycle du combustible, depuis l’extraction des minerais d’uranium jusqu’à la production des concentrés miniers d’uranium : divers procédés physiques et chimiques sont appliqués, à la fois pour purifier l’uranium et abaisser la concentration en molybdène.Au cours de cette étude, une nouvelle méthode de séparation du molybdène a été développée pour caractériser sa composition isotopique dans des minerais, minéraux et concentrés miniers d’uranium. La variabilité des compositions isotopiques du molybdène dans un gisement d’uranium est principalement due aux mécanismes d’adsorption et/ou de précipitation du molybdène. Les gisements magmatiques et sédimentaires ont des compositions isotopiques différentes, ce qui permet ainsi leurs distinctions. Les concentrés miniers d’uranium produits à partir de ces deux types de gisements ont des compositions isotopiques similaires aux minerais. Ces résultats soulignent ainsi le potentiel des isotopes du molybdène comme traceur des origines des concentrés miniers d’uranium. Cependant, un fractionnement des isotopes du molybdène a été établi lors de la production des concentrés miniers d’uranium pour deux usines au Niger. Les procédés de purification de l’uranium tels que la lixiviation, l’extraction par solvant et la précipitation ont été reproduits en laboratoire sur des échantillons réels pour expliquer le fractionnement isotopique du molybdène lors de la production des concentrés miniers. Au cours de ces procédés, le fractionnement peut être positif (lixiviation), négatif (extraction par solvant, précipitation à l’eau oxygénée) ou nul (précipitation à l’ammoniaque). Dans le cas des échantillons du Niger, la somme de ces procédés est négative, dans le sens des données expérimentales que nous avons obtenues, démontrant ainsi également le potentiel de l’utilisation des isotopes du molybdène comme traceur des procédés de transformations des matériaux du cycle du combustible nucléaire. / Nuclear forensics aims at determining the age, provenance as well as industrial or storage history of uranium ores and uranium ore concentrates that are part of the nuclear fuel cycle. Several potential tracers have already been identified for this purpose. However, these tracers are not providing always unambiguous information. This study is focused on establishing Mo isotopes as a new tracer of uranium ore provenance and of ore processing for its application in nuclear forensics. Molybdenum and uranium share a number of common geochemical properties. In the nuclear fuel cycle, molybdenum is an impurity that is difficult to separate during uranium extraction and purification processes, while its concentration is required to be lower than some specification limits. We focused this study on the first part of the nuclear fuel cycle, from the uranium ores extraction to the production of uranium ore concentrates.We developed an enhanced separation method for Mo from a uranium-rich matrix (uranium ores, uranium minerals, uranium ore concentrates) in order to analyze the mass fractionation induced by processes typical of the nuclear fuel cycle. Molybdenum isotopic compositions in uranium ores depend of adsorption and precipitation processes. The δ98Mo values of sedimentary uranium ores is shifted to negative values relative to magmatic ores. This provides a means of distinguishing these types of uranium ores. Uranium ores concentrates produced from both uranium ore natures (magmatic and sedimentary) have Mo isotope compositions similar to the uranium ores. These results suggest that molybdenum isotopes have a strong potential of as a tracer for identifying the origin of the uranium ore concentrates. However, Mo isotopes fractionations were established during the production of uranium ore concentrates in the both Niger mills. We reproduced in laboratory the lixiviation, solvent extraction and precipitation processes to explain these observations. The Mo isotopes fractionation is positive for the lixiviation process, negative for the solvent extraction and precipitation with hydrogen peroxide, and null for ammonia precipitation. In the case of the Niger samples, the sum of these processes is negative and agrees with our experimental data. Mo isotopes have a strong potential as a tracer for identifying the origin and transformation of uranium in the nuclear fuel cycle, in the framework of nuclear forensics.