No description available.

Wake interactions on a floating platform for offshore wind energy applications were investigated. The study is performed in collaboration with Hexicon AB which has a patent family for innovative floating platforms, which are able to turn automatically. The Jensen model is used for wake effect calculations and the simulations were performed in MATLAB. The present study starts with wind speed and wind direction data analysis for the specific site that Hexicon AB plans to construct its first platform. Data analysis is followed by wake interaction studies for H4-24MW type Hexicon AB platform. Wake interaction simulations were performed for three different cases. Fixed turbine and platform, Nacelle yawing and fixed platform and Nacelle yawing and turned platform. Different cases were investigated in order to see wake interactions for different wind directions. Wind direction effect on wake interactions were performed between _90_ and 90_ with an increment of 10_. After having the simulation results for Nacelle yawing and turned platform case the results were compared with ANSYS - CFX simulations results. The results didn’t match exactly but they were very close, which is an indicator to the validity of the Jensen Model. After finding out the possible behavior of wake interactions for different wind directions, power calculations were performed for the same three cases. In order to perform the power calculations the wake interactions for different wind directions were taken into account. In case of platform turning it was assumed that power losses were caused both by wake interactions and in case of thrusters activation. The losses that would be caused by different thrust forces on the turbine blades were not included. The last study was performed to suggest different layouts. In the second case, Nacelle yawing and fixed platform, it was found out that nacelle yawing for most of the angles is not possible because it creates wake regions in front of the rotor area. It was decided to propose new turbine configurations on the platform which are tolerant to different nacelle yawing angles. The simulations were run without considering any constructions limitations, meaning that the availability of platform structure was not included. The study is ended by performing some probabilistic results for platform turning behavior.

Deterioration of concrete structures due to the corrosion of embedded steel is a well-known universal problem. Norway with its numerous bridges, ports, offshore and floating structures along its coastline, is also encountered with corrosion degradation. The harsh environment of the Norwegian Sea regarding its low temperature, wind, and waves, makes the design and construction of marine structures more demanding. In recent years, usage of sustainable composite materials in the field of structural engineering has been rising. The usage of natural fibre reinforced polymer materials in the form of reinforcement bars or macro fibres with a low density, high strength, and excellent corrosion resistance, gives us better choices for the design and construction of marine structures. Our knowledge about the fibre reinforced self-compacting concrete has increased as a result of introducing it as a building material some decades ago. However, more research is still needed when it comes to the application of new types of fibres. This thesis is a result of this need, whereby the author has done two series of experimental programmes regarding the subject. In the first series, the flow characteristics of fresh state, conventional and self-compacting macro basalt fibre concrete were studied. In the second series, mechanical properties of high performance and medium strength macro basalt fibre concrete including the post-cracking behaviour, compressive strength and electrical resistivity were in focus. The findings were presented in three appended papers and the extended summary composing this thesis. Additionally, the thesis presents an overview of the design procedure of floating concrete structures and the possibility of using macro basalt fibre concrete via a case study. The author’s literature review shows that basalt fibres have an adequate resistance against alkali environment of the concrete matrix and corrosive environment of seawater. / <p>QC 20160607</p>

Wake interactions on a floating platform for offshore wind energy applications were investigated.The study is performed in collaboration with Hexicon AB which has a patent family for innovative floating platforms, which are able to turn automatically. The Jensen model is used for wake effect calculations and the simulations were performed in MATLAB. The present study starts with wind speed and wind direction data analysis for the specific site that Hexicon AB plans to construct its first platform. Data analysis is followed by wake interaction studies for H4-24MW type Hexicon AB platform. Wake interaction simulations were performed for three different cases. Fixed turbine and platform, Nacelle yawing and fixed platform and Nacelle yawing and turned platform. Different cases were investigated in order to see wake interactions for different wind directions. Wind direction effect on wake interactions were performed between _90_ and 90_ with an increment of 10_. After having the simulation results for Nacelle yawing and turned platform case the results were compared with ANSYS - CFX simulations results. The results didn’t match exactly but they were very close, which is an indicator to the validity of the Jensen Model. After finding out the possible behavior of wake interactions for different wind directions, power calculations were performed for the same three cases. In order to perform the power calculations the wake interactions for different wind directions were taken into account. In case of platform turning it was assumed that power losses were caused both by wake interactions and in case of thrusters activation. The losses that would be caused by different thrust forces on the turbine blades were not included. The last study was performed to suggest different layouts. In the second case, Nacelle yawing and fixed platform, it was found out that nacelle yawing for most of the angles is not possible because it creates wake regions in front of the rotor area. It was decided to propose new turbine configurations on the platform which are tolerant to different nacelle yawing angles. The simulations were run without considering any constructions limitations, meaning that the availability of platform structure was not included. The study is ended by performing some probabilistic results for platform turning behavior.

This project investigates the possibilities of building on water as a way to add valuable land to dense cities. By utilizing floating structures, I have made a proposal for a new city district on the water outside of Fisksätra, a suburb located 30 minutes east of Stockholm. My ambition was to create a diverse and lively area with business and dwellings that cater to people in all stages of life. The proposal stretches along the western coast of Fisksätra creating a connection between the center of the suburb and a neighboring town as well as making that stretch of the coast accessible for the public. Increasing the access to the water and the coastline has been one of the main goals of the project and the proposal has been made with the ambition to open up the water for both the inhabitants of the new district and the rest of Fisksätra.

The project aimed to familiarize yourself with the issue of floating structures, according to the procurement documents and knowledge acquired during studie, a study of existing floating structures. Review was conducted design adapted from documents. More space was devoted bottom structure in the assessment. Other structures designed only provisionally.

The gradual depletion of shallow water hydrocarbon deposits has forced the offshore oil and gas industry to develop reserves in deeper waters. Dynamically installed anchors have been proposed as a cost-effective anchoring solution for floating offshore structures in deep water environments. The rocket or torpedo shaped anchor is released from a designated drop height above the seafloor and allowed to penetrate the seabed via the kinetic energy gained during free-fall and the anchor’s self weight. Dynamic anchors can be deployed in any water depth and the relatively simple fabrication and installation procedures provide a significant cost saving over conventional deepwater anchoring systems. Despite use in a number of offshore applications, information regarding the geotechnical performance of dynamically installed anchors is scarce. Consequently, this research has focused on establishing an extensive test database through the modelling of the dynamic anchor installation process in the geotechnical centrifuge. The tests were aimed at assessing the embedment depth and subsequent dynamic anchor holding capacity under various loading conditions. Analytical design tools, verified against the experimental database, were developed for the prediction of the embedment depth and holding capacity.

Ce manuscrit porte sur les transitions compressible-incompressible dans les équations aux dérivées partielles de la mécanique des fluides. On s'intéresse à deux problèmes : les structures flottantes et les fluides en rotation. Dans le premier problème, l'introduction d'un objet flottant dans les vagues induit une contrainte sur le fluide et les équations gouvernant le mouvement acquièrent une structure compressible-incompressible. Dans le deuxième problème, le mouvement de fluides géophysiques compressibles est influencé par la rotation de la Terre. L'étude de la limite à rotation rapide montre que le champ vectoriel de vitesse tend vers une configuration horizontale et incompressible.Les structures flottantes constituent un exemple particulier d'interaction fluide-structure, où un solide partiellement immergé flotte à la surface du fluide. Ce problème mathématique modélise le mouvement de convertisseurs d'énergie marine. En particulier, on s'intéresse aux bouées pilonnantes, installées proche de la côte où les modèles asymptotiques en eaux peu profondes sont valables. On étudie les équations de Saint-Venant axisymétriques en dimension deux avec un objet flottant à murs verticaux se déplaçant seulement verticalement. Les hypothèses sur le solide permettent de supprimer le problème à bord libre associé avec la ligne de contact entre l'air, le fluide et le solide. Les équations pour le fluide dans le domaine extérieur au solide sont donc écrites comme un problème au bord quasi-linéaire hyperbolique. Celui-ci est couplé avec une EDO non-linéaire du second ordre qui est dérivée de l'équation de Newton pour le mouvement libre du solide. On montre le caractère bien posé localement en temps du système couplé lorsque que les données initiales satisfont des conditions de compatibilité afin de générer des solutions régulières.Ensuite on considère une configuration particulière: le retour à l'équilibre. Il s'agit de considérer un solide partiellement immergé dans un fluide initialement au repos et de le laisser retourner à sa position d'équilibre. Pour cela, on utilise un modèle hydrodynamique différent, où les équations sont linearisées dans le domaine extérieur, tandis que les effets non-linéaires sont considérés en dessous du solide. Le mouvement du solide est décrit par une équation intégro-différentielle non-linéaire du second ordre qui justifie rigoureusement l'équation de Cummins, utilisée par les ingénieurs pour les mouvements des objets flottants. L'équation que l'on dérive améliore l'approche linéaire de Cummins en tenant compte des effets non-linéaires. On montre l'existence et l'unicité globale de la solution pour des données petites en utilisant la conservation de l'énergie du système fluide-structure.Dans la deuxième partie du manuscrit, on étudie les fluides en rotation rapide. Ce problème mathématique modélise le mouvement des flots géophysiques à grandes échelles influencés par la rotation de la Terre. Le mouvement est aussi affecté par la gravité, ce qui donne lieu à une stratification de la densité dans les fluides compressibles. La rotation génère de l'anisotropie dans les flots visqueux et la viscosité turbulente verticale tend vers zéro dans la limite à rotation rapide. Notre interêt porte sur ce problème de limite singulière en tenant compte des effets gravitationnels et compressibles. On étudie les équations de Navier-Stokes-Coriolis anisotropes compressibles avec force gravitationnelle dans la bande infinie horizontale avec une condition au bord de non glissement. Celle-ci et la force de Coriolis donnent lieu à l'apparition des couches d'Ekman proche du bord. Dans ce travail on considère des données initiales bien préparées. On montre un résultat de stabilité des solutions faibles globales pour des lois de pression particulières. La dynamique limite est décrite par une équation quasi-géostrophique visqueuse en dimension deux avec un terme d'amortissement qui tient compte des couches limites. / This manuscript deals with compressible-incompressible transitions arising in partial differential equations of fluid mechanics. We investigate two problems: floating structures and rotating fluids. In the first problem, the introduction of a floating object into water waves enforces a constraint on the fluid and the governing equations turn out to have a compressible-incompressible structure. In the second problem, the motion of geophysical compressible fluids is affected by the Earth's rotation and the study of the high rotation limit shows that the velocity vector field tends to be horizontal and with an incompressibility constraint.Floating structures are a particular example of fluid-structure interaction, in which a partially immersed solid is floating at the fluid surface. This mathematical problem models the motion of wave energy converters in sea water. In particular, we focus on heaving buoys, usually implemented in the near-shore zone, where the shallow water asymptotic models describe accurately the motion of waves. We study the two-dimensional nonlinear shallow water equations in the axisymmetric configuration in the presence of a floating object with vertical side-walls moving only vertically. The assumptions on the solid permit to avoid the free boundary problem associated with the moving contact line between the air, the water and the solid. Hence, in the domain exterior to the solid the fluid equations can be written as an hyperbolic quasilinear initial boundary value problem. This couples with a nonlinear second order ODE derived from Newton's law for the free solid motion. Local in time well-posedness of the coupled system is shown provided some compatibility conditions are satisfied by the initial data in order to generate smooth solutions.Afterwards, we address a particular configuration of this fluid-structure interaction: the return to equilibrium. It consists in releasing a partially immersed solid body into a fluid initially at rest and letting it evolve towards its equilibrium position. A different hydrodynamical model is used. In the exterior domain the equations are linearized but the nonlinear effects are taken into account under the solid. The equation for the solid motion becomes a nonlinear second order integro-differential equation which rigorously justifies the Cummins equation, assumed by engineers to govern the motion of floating objects. Moreover, the equation derived improves the linear approach of Cummins by taking into account the nonlinear effects. The global existence and uniqueness of the solution is shown for small data using the conservation of the energy of the fluid-structure system.In the second part of the manuscript, highly rotating fluids are studied. This mathematical problem models the motion of geophysical flows at large scales affected by the Earth's rotation, such as massive oceanic and atmospheric currents. The motion is also influenced by the gravity, which causes a stratification of the density in compressible fluids. The rotation generates anisotropy in viscous flows and the vertical turbulent viscosity tends to zero in the high rotation limit. Our interest lies in this singular limit problem taking into account gravitational and compressible effects. We study the compressible anisotropic Navier-Stokes-Coriolis equations with gravitational force in the horizontal infinite slab with no-slip boundary condition. Both this condition and the Coriolis force cause the apparition of Ekman layers near the boundary. They are taken into account in the analysis by adding corrector terms which decay in the interior of the domain. In this work well-prepared initial data are considered. A stability result of global weak solutions is shown for power-type pressure laws. The limit dynamics is described by a two-dimensional viscous quasi-geostrophic equation with a damping term that accounts for the boundary layers.