<p dir="ltr">Tuberculosis remains a global health challenge, ranking as the second leading cause of mortality worldwide in 2022. The resilience of <i>Mycobacterium tuberculosis</i>, the causative agent of tuberculosis, is enhanced by the high expression of efflux pumps that confer antibiotic tolerance and the formation of biofilms that confer resistance to antibiotics. Carbon nanomaterials (CNMs) exhibit a broad-spectrum of antibacterial efficacy, making them promising candidates for combating drug-resistant bacterial strains. The effects of the novel carbon allotropes called fullertubes (C₉₀) on any living cell have not been studied. In our study, we employed <i>Mycobacterium smegmatis</i> as a model organism for <i>M. tuberculosis</i> and exposed it to fullertubes and fullerenes. We explored the impact of these CNMs on efflux activity and biofilm formation through biochemical assays like ethidium bromide transport assay and crystal violet assay. We also investigated their impact on lipid biosynthesis associated with log-phase growth and biofilm formation using metabolic radiolabeling studies. We also investigated the effects of the efflux pump inhibitors (EPIs) piperine, berberine, 1-(1-naphthylmethyl)-piperazine and thioridazine on efflux activity, biofilm formation, and lipid biosynthesis associated with log-phase growth and biofilm formation in <i>M. smegmatis.</i> We utilized metabolic radiolabeling methods using ¹⁴C-palmitic acid and ¹⁴C-acetic acid which are precursors of lipid biosynthesis and analyzed the lipids by silica-thin layer chromatography and autoradiography. Our studies revealed that CNMs do not influence efflux activity. However, efflux pump inhibitors effectively block efflux activity in <i>M. smegmatis</i>. Biofilm formation was decreased by CNMs and EPIs. In biofilm cells, fullertubes increased the incorporation of radiolabeled ¹⁴C-palmitic acid into glycopeptidolipids on the cell surface as well as inside the cell. Piperine and berberine affected the incorporation of the radiolabels into lipids such as trehalose monomycolate, phosphatidylethanolamine and cardiolipin in planktonic and biofilm cells. Our study provides insights into the diverse effects of CNMs and efflux pump inhibitors on <i>M. smegmatis</i>.</p>

No description available.

In dieser Arbeit werden Modellsysteme der Wechselwirkung von Atomen, Molekülen und deren Ionen mit Festkörperoberflächen studiert. Die Dissertation besteht aus drei Teilen. Im ersten Teil werden Experimente zur Streuung von He0 und He+ mit keV Energien unter streifendem Einfall an Al(111), Al(100) und Al(110) vorgestellt. Anteile überlebender Ionen und Verschiebungen der Winkelverteilungen für einlaufende Atome und Ionen sind in guter Übereinstimmung mit theoretischen Auger-Neutralisationsraten und He-1s-Grundzustandsenergieverschiebungen. Damit liegt ein detailliertes mikroskopisches Verständnis dieses Modellsystems der Atom-Oberflächen-Wechselwirkung vor. Die Studien wurden auf Edelgase und Oberflächen mit komplexerer elektronischer Struktur sowie Ionisationsprozesse erweitert. Im zweiten Teil wird die Formierung von doppelt-angeregten He-Atomen bei der Streuung von He2+ an Ni(110) und Fe(110) mittels Autoionisationsspektren studiert. Diese zeigen eine ausgeprägte Sensitivität auf die Belegung der Oberflächen mit Adsorbaten und deren Umordnung, Desorption bzw. Lösung im Volumen des Festkörpers bei Erhöhung der Temperatur. In diesem Rahmen ergibt sich eine alternative Interpretation aktueller Arbeiten, in denen Autoionisationsspektren zur Ableitung der Spin-Polarisation von Ni- und und Fe-Oberflächen verwendet wurden. Im dritten Teil werden Winkelverteilungen, Fragmentspektren und Ladungsanteile für die streifende Streuung von C60-Molekülionen mit an Al(100), Be(0001) und LiF(100) studiert. Es wird gezeigt, dass die elastischen Eigenschaften des Fullerens durch Metalloberflächen stark modifiziert werden. Anhand von Verschiebungen von Winkelverteilungen für einfach- und zweifach-geladene einlaufende Ionen werden erstmalig Abstände des Elektroneneinfangs für positiv geladene Fullerenionen vor Metalloberflächen gemessen. Für LiF(100) treten ausgeprägte Anregungen der Moleküle durch das periodische elektrische Feld der Oberfläche auf. / This work is devoted to the study of model systems for the interaction of atoms, molecules, and their ions with solid surfaces. The thesis consists of three parts. In the first part, He atoms and ions with keV energies are scattered under grazing angles of incidence from Al(111), Al(100), and Al(110). Fractions of surviving ions and shifts of angular distributions for incident atoms and ions, are in good agreement with theoretically calculated Auger neutralization rates and He 1s ground-state energy shifts. A detailed microscopic understanding for a model system of ion-surface interactions is concluded. The studies are extended to noble gas atoms and surfaces with a more complex electronic structure as well as the Auger ionization process. In the second set of experiments, the formation of doubly excited states of He atoms during collisions of He2+ ions with Ni(110) and Fe(110) is studied via autoionization spectra. The electron spectra show a pronounced dependence on the coverage of the target surface with adsorbates. Thermal desorption and dissolution of surface contaminations into the bulk at elevated temperatures provide an alternative interpretation of recent work where the local electron spin polarization of Ni and Fe surfaces was deduced from autoionization spectra. In the third part, angular distributions, fragmentation, and charge fractions are studied for grazing scattering of C60 fullerene ions from Al(100), Be(0001), and LiF(100). A strong perturbation of the elastic properties of the fullerene by a nearby metal surface is demonstrated. Shifts of angular distributions for incident singly and doubly charged ions for the metal surfaces provide the first information on distances of electron transfer for positively charged fullerenes in front of metal surfaces. For the LiF(100) surface, pronounced internal excitations due to interactions with the periodic electric field at the surface are observed.

Fullerenhaltige Bulk-Heterojunction-Solarzellen auf Polymerbasis zeigen derzeit eine geringe Langzeitstabilität, die unter anderem auf der Entmischung der Bulkphasen beruht. In dieser Arbeit wurden daher auf neuartige Weise Blockcopolymere entwickelt, die zur Stabilisierung der Phasen dienen können. Ausgehend von Poly-3-hexylthiophen-Makroinitiatoren wurde ein zweiter Block mit reaktivem Comonomer polymerisiert, das zur Anbindung von reinem Fullerens bzw. von Fullerenderivaten diente. Die fullerenfunktionalisierten Polymere wurden in Modell-Systeme eingemischt und zeigten erste Verbesserungen bezüglich der Phasenstabilisierung.

Materials based on fullerenes and carbon nanotubes are very much different from most “traditional” materials, primarily because they are built from nanosized molecules with highly symmetry-dependent properties. Being the subject of a very active research field over the last twenty years, carbon nanostructures proved to be indeed extraordinary. Their splendid mechanical properties attract a great interest among material scientists. Their wide range of electrical properties, from ballistic conductors to insulators, makes them ideal candidates for future, better electronics. The possibilities seem to be nearly unlimited, with proposed applications ranging from quantum computing to medicine. However, in order to make it all happen one day, we first need to explore and understand the physics and chemistry of carbon nanomaterials. This work focuses on production and characterization of materials and structures in which fullerenes and/or carbon nanotubes are the main ingredients, and which can be produced or modified under high-pressure – high-temperature (hp-hT) conditions. Raman and photoluminescence spectroscopy, X-ray diffraction and scanning probe microscopy were employed for characterization of the samples. The research presented in this thesis is spread over a rather wide range of carbon nanomaterials. To highlight some of the main results – the first hp-hT polymerization of C60 nanorods and the C60-cubane compound is reported. The polymerization mechanism in the latter case was identified to be radically different from that in pure C60. The pressure-temperature diagram of C60-cubane is presented. A comparative study of C60 and C70 peapods under extreme p-T conditions reveals how the confinement affects the fullerenes’ ability for polymerization. Finally, in situ resistance measurements on Rb4C60 under high pressure show that the semiconducting character of this material persists at least up to 2 GPa, contradicting earlier reports on the existence of an insulator-to-metal transition and providing an insight into conduction mechanisms in this anomalous intercalated compound.

Στην παρούσα διατριβή μελετήθηκε η ετερογενοποίηση της αντίδρασης φωτοξείδωσης του 2 μεθυλ 2 βουτενίου προς αλλυλικά υδροπεροξείδια με τη χρήση φωτοκαταλυτών που περιέχουν φουλερένιο C60 στηριγμένο σε οξειδικούς φορείς. Το φουλερένιο C60 είναι γνωστό για τη δράση του ως φωτοευαισθητοποιητής της παραγωγής οξυγόνου απλής κατάστασης (singlet oxygen) κατά την ακτινοβόληση με ορατή ακτινοβολία, το οποίο πραγματοποιεί την οξείδωση αλκενίων μέσω της αντίδρασης Schenck-Ene. Ήταν επιθυμητό να παρασκευαστούν καταλύτες στους οποίους το C60 να διαθέτει σταθερή ομοιοπολική σύνδεση με την επιφάνεια των φορέων. Αυτό πραγματοποιήθηκε μέσω της σύνθεσης ενός μονοϋποκατεστημένου μεθανοφουλερενικού παραγώγου, το οποίο συνδέθηκε με την επιφάνεια των φορέων (Grafting). Επιπλέον, τα υλικά σχεδιάστηκαν έτσι, ώστε να παρέχουν τη δυνατότητα της πλήρους και ελεγχόμενης αποκοπής κάτω από κατάλληλες συνθήκες, γεγονός που επιτρέπει τον έλεγχο της ακεραιότητας του C60 μετά από χρήση του σε αντίδραση ή μετά από θερμική ή χημική κατεργασία. Παράλληλα παρασκευάστηκαν καταλύτες με κλασικές μεθόδους σύνθεσης ετερογενών καταλυτών. Ως φορείς χρησιμοποιήθηκαν η SiO2 και η Al2O3. Τα υλικά που παρασκευάστηκαν, μελετήθηκαν ως προς τη φωτοκαταλυτική τους δράση ως προς την αντίδραση φωτοξείδωσης του 2 μεθυλ 2 βουτενίου και έγινε σύγκριση τους με βάση τον τρόπο παρασκευής και το φορέα στήριξης. Ακόμη, έγινε σύγκριση της ετερογενούς διεργασίας με την ανάλογη ομογενή. Τα υλικά εμφάνισαν στο σύνολο τους φωτοκαταλυτική δράση στην παραπάνω αντίδραση. Σε κάθε περίπτωση οι στηριγμένοι σε SiO2 καταλύτες εμφάνισαν υψηλότερη δραστικότητα από τους αντίστοιχους που παρασκευάστηκαν σε φορέα Al2O3. Ακόμη, τα υλικά που παρασκευάστηκαν με τη μέθοδο Grafting σε φορέα SiO2 παρουσίασαν την υψηλότερη δραστικότητα ανάμεσα σε όλους καταλύτες που εξετάστηκαν. Η δραστικότητά τους ήταν μάλιστα υψηλότερη και από την αντίστοιχη που παρατηρήθηκε κατά τη χρήση ισομοριακής ποσότητας C60 σε ομογενή αντίδραση αλλά μικρότερη από αυτή των γνωστών φωτοκαταλυτών Rose Bengal και TPP (5,10,15,20-τετραφαινυλο-21Η,23Η-πορφυρίνης). Τέλος, μελετήθηκε η θερμική σταθερότητα των υλικών κάτω από οξειδωτικές συνθήκες. Διαπιστώθηκε ότι η σύνδεση του C60 στην επιφάνεια των φορέων με τη μέθοδο Grafting εμφανίζει γενικά παρόμοια θερμική σταθερότητα σε σχέση με τους καταλύτες που παρασκευάστηκαν με τη μέθοδο του Υγρού Εμποτισμού. / The scope of this dissertation was the heterogenization of the photooxidation reaction of 2-methyl-2-butene towards allylic hydroperoxides with the use of fullerene C60 containing catalysts supported on oxide carriers. The reaction was known to be efficient under homogeneous conditions. The photooxidation of alkenes is conducted by singlet oxygen (1Δg) which is produced by photosensitizers. C60 is known for its photosensitizing ability to produce singlet oxygen under visible irradiation. It was a requirement that C60 would be connected through stable and covalent bonding to the catalysts surface. This became possible through the preparation of a monosubstituted methanofullerene which was subsequently attached through covalent bonding to the surface of the carriers (Grafting). Additionally, a key requirement in the materials design was to provide us with the ability of controlled -under the appropriate conditions- and quantitative detachment of the part which bears C60, and its recovery in solution. This is important because it allows us to examine possible changes in the C60 molecule after the material’s use in catalytic processes or after its thermal or chemical treatment. Employing well-known methods of heterogeneous catalysts synthesis catalysts with the corresponding % molar concentration in C60 were also prepared. The photocatalytic behavior of the prepared materials was investigated in the photooxidation reaction of 2-methyl-2-butene. The effect of carrier and preparation method was also investigated. A comparison was also made with the homogeneous case. The prepared materials were all efficient catalysts in the photooxidation reaction of 2-methyl-2-butene. In all cases, the supported on SiO2 catalysts showed higher reactivity than the corresponding ones supported on Al2O3. Moreover, the catalysts prepared with the Grafting method on SiO2 showed the highest reactivity among all the catalysts examined. The reactivity was higher than in the homogeneous case using equimolar solutions of C60 but lower to the reactivity recorded in the case of the well established photosensitizers Rose Bengal and Tetraphenylporphine (TPP). Finally, the thermal stability of the prepared materials under oxidative conditions was studied._It was realized that materials prepared through Grafting show generally similar thermal behavior with the catalysts prepared with the Incipient Wetness method.

Recent carbon allotropes such as carbon nanotubes (CNTs), fullerenes (C60s) and graphene have attracted great interests in both science and engineering due to their unique properties such as excellent electrical and mechanical properties as well as its vast surface area, and have led to many commercial applications. Especially, CNTs have been considered to be one of the promising candidates in the Li ion battery system because of its outstanding properties. However, the experimental results in the pristine CNT system have shown just slight improvement than original graphitic carbon material, which has been attributed to the weak adsorption of Li on CNTs. In this study, we investigated two types of CNT-C60 hybrid system consisting of CNTs and C60s to improve Li adsorption capabilities and predict its performance through quantum mechanical (QM) computations. First, we investigated adsorption energy of lithium (Li) on dilute CNT-C60 hybrid and CNT-C60 nanobud system as well as various electronic properties such as band structure, density of states (DOS), molecular orbital and charge distribution. Then, we expanded our interest to the more realistic condensed structure of CNT-C60 hybrid and nanobud system to examine actual electrochemical characteristics. The study of the condensed structure has been expanded to the very unique CNT-C60 nano-network system and examined mechanical strength as well as electronic properties. Finally, Li adsorption on other carbon allotropes system such as graphene-C60 hybrid and graphene-C60 bud system was investigated in order to provide fundamental understanding of electronic interaction between carbon allotrope and effect of Li adsorption.

Nous avons synthétisé différentes dyades donneurs-accepteurs (D-A) π-conjuguées à base de fullerène pour des applications photovoltaïques dans lesquelles les unités D étaient soit des oligophenylenevinylenes (OPV) soit des oligophenyleneethynylene (OPE) et les unités A étaient le C60 ou un endofullerène du type Y3N@C80. Il y avait une exigence supplémentaire pour nos matériaux, à savoir qu’ils devaient s’auto-organiser en phases liquides-cristallines. Pour ce faire, toutes les unités D contenaient un promoteur mésogène afin d'induire le mésomorphisme de la dyade D- et donc de contrôler la morphologie des couches minces nécessaires à l’élaboraiton des cellules photovoltaïques grâce à une organisation supramoléculaire. En dehors de cela, nous avons étudié l’influence de la nature chimique du donneur (par exemple lyophile ou amphiphile), de la longueur des oligomères et de la multiaddition sur les propriétés photophysiques et sur l'auto-assemblage. Nous avons synthétisé une dyade OPE-Y3N@C80 qui est le premier dérive mésomorphe et photosensible de ce type de métallofullerène endohédral. / We have synthesized different π-conjugated system-fullerene dyads for photovoltaic applications, where the donor units were either oligophenylenevinylene (OPV) or oligophenyleneethynylene (OPE) derivatives and for the acceptor, C60 or Y3N@C80 was used. There was an additional requirement for our materials: liquid crystallinity. All the donor units contained a mesogenic promoter in order to induce mesomorphism in the D-A dyad and to control the morphology of the prepared film through supramolecular organization. Apart from that, we investigated the effect of the chemical nature of the donor moiety (ie. lyophilic or amphiphilic), the oligomeric length and multiaddition on the photophysical properties and on the self-assembly. We have synthesized an OPE-Y3N@C80 dyad which is the first trimetallic nitride template endohedral metallofullerene derivative with mesomorphic and photoactive properties.

Ce document présente une étude des mécanismes de relaxation de fullerènes induits par photoexcitation. Nous avons exploré les processus d'ionisation et de fragmentation de ces systèmes modèles suite à une irradiation par différentes sources de lumière : impulsion femtoseconde, laser à électron libre (IR lointain) et Synchrotron (XUV). Afin d'étudier ces mécanismes, nous utilisons l’imagerie par cartographie de vitesse qui nous permet de suivre l'évolution de la distribution angulaire de vitesse des particules émises. Suivant la durée, l'intensité et la longueur d'onde de l'excitation utilisée, la nature des mécanismes change drastiquement (mécanismes statistiques, ionisation cohérente en champ fort, autoionization de plasmons, etc…). Plusieurs approches théoriques sont utilisées allant du modèle Weisskopf pour les processus statistiques à la résolution de l'équation de Schrödinger dépendante du temps pour les processus cohérents. Cette étude permet de relier les mécanismes de relaxation intervenant à différentes échelles de temps / This document presents a study of relaxation mechanisms of fullerenes induced by photoexcitation. We have investigated ionization and fragmentation processes of these model systems under irradiation by various light sources: femtosecond pulse, free electron laser (far IR) and Synchrotron (XUV). To study these mechanisms, we use the velocity map imaging technique which allows us to follow the evolution of the angular distribution and velocity of the emitted particles. The nature of the relaxation mechanisms changes drastically (statistical mechanisms, coherent ionization in strong field, autoionization of plasmons, etc.) depending on the pulse duration, its intensity and the wavelength. Several theoretical approaches have been used including a Weisskopf modelling for the statistical processes and direct treatment of the time dependant Schrödinger equation for the coherent processes. This study allows us building bridges between the relaxation mechanisms occurring on various scales of time

Au cours des dernières années, le développement des cellules organiques à réseaux interpénétrés a permis d’améliorer les rendements de conversion photovoltaïque (PV). Ces dispositifs incorporent une couche active constituée d’un mélange d’un matériau donneur d’électron (D) et d’un matériau accepteur d’électron (A). La réalisation de ces cellules requiert une optimisation minutieuse de ce mélange et de la morphologie de cette couche photo-active qui en résulte. Cette dernière peut cependant évoluer spontanément vers une ségrégation de phase, généralement délétère pour les performances PV. Une solution possible, et relativement peu étudiée, consiste à lier chimiquement le donneur D et l’accepteur A par un espaceur non-conjugué. Les travaux décrits dans ce manuscrit portent sur la synthèse et la caractérisation d’assemblages moléculaires de type D-σ-A ainsi que leur utilisation comme matériau dit « unique » pour la fabrication de cellules solaires organiques mono composant. Une première famille de dyades et triades à base d’un bloc donneur de type quaterthiophène a été étudiée. Cette partie décrit la méthodologie générale d’assemblage des blocs D et A via une réaction de cycloaddition de type Huisgen. Au cours des chapitres suivant, plusieurs dyades basées sur un bloc donneur « push-pull » ont été synthétisées puis caractérisées. Les performances PV de ces composés ont été évaluées au sein de cellules solaires mono-composant et les meilleurs rendements de conversion, atteignant 1.4 %, rivalisent avec l’état de l’art. / Over the last few years, the development of bulk heterojunction organic solar cells (BHJ OSCs) led to significant increase in photovoltaic (PV) efficiency. Such devices are based on interpenetrated networks of an electron-donor material (D) and an electron-acceptor material (A) constituting the active layer. Nevertheless a careful optimization of the morphology is required to reach high power conversion efficiency. Furthermore, this optimized morphology can evolve towards spontaneous phase segregation which can be detrimental for the PV performances. To circumvent these limitations, a relatively unexplored approach relies on the use of a material where the donor and the acceptor moieties are covalently linked to each other through a nonconjugated π-connector. In this context, the work reported herein describes the synthesis and characterization of various molecular D-σ-A assemblies, as well as their preliminary evaluation as “unique” material for the realisation of single component organic solar cells (SC-OSCs). A first family of dyads and triads, based on quaterthiophene moieties as donor block, was studied. A general methodology to assemble the two D and A blocks via a Huisgen-type click-chemistry is described. Then, in the next chapters, several dyads based on a “push-pull” donor block have been synthesized and characterized. The PV performances of these compounds have been evaluated in SC-OSCs leading to power conversion efficiency up to 1.4 %, a value close to the state of the art.