No description available.

This thesis focuses on an early nineteenth-century homestead known as the Walker Place homestead at Spirit Hill Farm in northern Mississippi. The goal of this thesis is to conduct a ground-penetrating radar (GPR) and shovel test survey to explore how changing landscapes simultaneously (re)create and destroy senses of place or Homescapes. Homescapes have received little attention in the field of archaeology and have not been applied to Euro-American Homescapes. I apply this theoretical construct in a novel way as a venture to further develop an avenue in archaeology to be collaborative and understand the past in a way that accurately reflects the realities of the past. I utilize historical records, oral histories, archaeological materials, and GPR to deepen our understanding of this site and to demonstrate the value of holistic archaeology and collaborating with the descendant community.

UHF bands because more penetration can be achieved at low frequencies. Consequently, large antennas are required, which limits their use for small airborne applications. This thesis explores various GPR antenna designs for a bi-static system that are at least operational from 225 MHz to 255 MHz and suitable for small airborne applications. The 3D electromagnetic simulation software Ansys high-frequency structure simulator (HFSS) was used to simulate various sizes of strip dipole, triangular bowtie, half elliptical bowtie, and elliptical bowtie antennas. Several physical models were constructed to validate the return loss simulation results. Additionally, simulation data is included for a wire dipole and a helical antenna. The helical antenna proved to be too large for small airborne application, so focus was placed on the dipole and bowtie designs. The performance of the dipole and bowtie antenna models are compared by size, weight, return loss (𝑆11), peak gain, and the transmit-to-receive isolation. Out of the fourteen simulated models, twelve meet the bandwidth requirement with an average weight of 0.23 lbs. It is found that the strip dipole exhibited wider bandwidth characteristics than the triangular, elliptical, and half elliptical bowtie models, while maintaining similar weight and size. The smallest strip dipole model is 50 mm x 528 mm x 1 mm, weighs 0.17 lbs, and is operational from 225 MHz to 283 MHz. Two strip dipole test antennas were fabricated and tested. Test results confirm the simulation predictions.

Observations of modern carbonate depositional environments and their accompanying depositional models have been used for decades in the reconstruction and interpretation of ancient carbonate depositional environments and stratigraphic successions. While these Holocene models are necessary for interpreting their more ancient counterparts, they inherently exclude important factors related to the erosion, diagenesis, and ultimate preservation of sediments and sedimentary structures that are ubiquitous in shallow marine carbonate environments. Andros Island, Bahamas is an ideal location to examine the validity of Holocene conceptual models, where geologically young (Late Pleistocene) limestones can be studied immediately adjacent to their well-documented modern equivalents. For this study, two 3D ground-penetrating radar (GPR) datasets (200 MHz and 400 MHz) were collected at a schoolyard in northwest Andros. These surveys reveal the geometries and internal characteristics of a peloidal-oolitic sand wave and tidal channel in unprecedented detail. These two prominent features are underlain by low-energy lagoonal wackestones and packstones, and are bordered laterally to the northwest by wackestones-packstones intermixed with thin sheets of peloidaloolitic grainstone. A deeper radar surface is observed at approximately 6 m depth dipping gently to the west, and is interpreted to be a karstified exposure surface delineating the base of a complete depositional sequence. Interpretation of the 3D radar volumes is enhanced and constrained by data from three cores drilled through the crest and toe of the sand wave, and through the tidal channel. This study is the first of its kind to capture the complex heterogeneity of a carbonate depositional package in three dimensions, where various depositional environments, sedimentary structures, and textures (mudstone to grainstone) have been preserved within a small volume.The results from this study suggest that the degree of vertical and lateral heterogeneity in preserved carbonate successions is often more complex than what can be observed in modern depositional environments, where sediments can generally only be observed in two dimensions, at an instant in time. Data from this study demonstrate the value of using two overlapping GPR datasets at differing resolutions to image the internal characteristics of a complete carbonate depositional package in three dimensions. From these datasets, a depositional model similar to other Holocene and Pleistocene carbonate depositional models is derived.

A multi-scale high-resolution geophysical and geological study was conducted in the Sevier Desert, central Utah, found within the Colorado Plateau-Basin and Range Transition Zone. The region is marked by with Quaternary volcanics and faulting as young as 660 yr B.P., with many fault scarps thought to have the potential for 7+ magnitude earthquakes. Three locations within the Sevier Desert which represent three different tectonic expressions of possible faulting at the surface were selected. These include a location found within surface sedimentation, a location with surface sedimentation and sub-surface basalts and a location with basalts, at the surface with very limited sedimentation. A suite of geophysical data were obtained including the use of P-wave, SH-wave, ground-penetrating radar (GPR). Auger holes, microprobe glass analysis, and mapping information were also completed in order to constrain and gain a more complete understanding of the sub-surface structure. These data were used to determine if there are sub-surface expressions of the possible surface scarps and if all the faults within the fault zone have the same structural style. The possible surface fault expressions were found to be connected to sub-surface fault expressions but with differing results within both sediments and basalts. Our data show that a multi-scale approach is needed to obtain a complete view of tectonic activity. The area faulting in the Sevier Desert penetrates at depth involving multiple complex styles that include some faulting that cuts recent lava flows and some that do not. The evidence also indicates that in at least some area faulting was episodic and others may be single events having implications on level of activity and hazard.

Near field imaging using microwave in medical applications has gain much attention recently as various researches show its high ability and accuracy in illuminating object comparing to the well-known screening tools such as Magnetic Resonance Imaging (MRI), digital mammography, ultrasound etc. This has encourage and motivate scientists continue to exploit the potential of microwave imaging so that a better and more powerful sensing tools can be developed. This thesis documents the development of antenna design for microwave imaging application such as breast cancer detection. The application is similar to the concept of Ground Penetrating Radar (GPR) but operating at higher frequency band. In these systems a short pulse is transmitted from an antenna to the medium and the backscattered response is investigated for diagnose. In order to accommodate such a short pulse, a very wideband antenna with a minimal internal reflection is required. Printed monopole and planar metal plate antenna is implemented to achieve the necessary operating wide bandwidth. The development of new compact printed planar metal plate ultra wide bandwidth antenna is presented. A generalized parametric study is carried out using two well-known software packages to achieve optimum antenna performance. The Prototype antennas are tested and analysed experimentally, in which a reasonable agreement was achieved with the simulations. The antennas present an excellent relative wide bandwidth of 67% with acceptable range of power gain between 3.5 to 7 dBi. A new compact size air-dielectric microstrip patch-antenna designs proposed for breast cancer detection are presented. The antennas consist of a radiating patch mounted on two vertical plates, fed by coaxial cable. The antennas show a wide bandwidth that were verified by the simulations and also confirmed experimentally. The prototype antennas show excellent performance in terms the input impedance and radiation performance over the target range bandwidth from 4 GHz to 8 GHz. A mono-static model with a homogeneous dielectric box having similar properties to human tissue is used to study the interaction of the antenna with tissue. The numerical results in terms the matching required of new optimised antennas were promising. An experimental setup of sensor array for early-stage breast-cancer detection is developed. The arrangement of two elements separated by short distance that confined equivalent medium of breast tissues were modelled and implemented. The operation performances due to several orientations of the antennas locations were performed to determine the sensitivity limits with and without small size equivalent cancer cells model. In addition, a resistively loaded bow tie antenna, intended for applications in breast cancer detection, is adaptively modified through modelling and genetic optimisation is presented. The required wideband operating characteristic is achieved through manipulating the resistive loading of the antenna structure, the number of wires, and their angular separation within the equivalent wire assembly. The results show an acceptable impedance bandwidth of 100.75 %, with a VSWR < 2, over the interval from 3.3 GHz to 10.0 GHz. Feasibility studies were made on the antenna sensitivity for operation in a tissue equivalent dielectric medium. The simulated and measured results are all in close agreement.

Within the archaeological record ‘mounds’ are often ubiquitous. They are common in many ancient cultures, and they vary in size, construction techniques and use. This research is focused upon optimizing the use of remote sensing for the non-invasive study of mounds both in the United States and the United Kingdom. This thesis presents three representative earthen mound sites and proposes a comprehensive and modular survey methodology to guide the planning and execution of a mound survey tailored to the unique requirements presented by the cultural resource at a particular location. In doing so, the research has provided optimized approaches to high resolution three-dimensional topographic models using a variety of digital methods. These models have been shown to accurately capture the variability of the modern ground surface, which is of vital importance to the management of the mounds. Furthermore, these models have proved vital for integrating geophysical methods into the holistic workspace, thereby providing a better archaeological understanding of the below ground remains. Every mound surveyed presented different challenges, and therefore had to be approached in a slightly different way. However, the general methodology was highly effective for both characterizing below-ground archaeological and natural anomalies, and for assessing the state of preservation of all mounds surveyed. As a result, a flowchart has been generated for non-invasive assessment of mounds in general. If followed, this will allow the production of a “snapshot” of the mound or mound group at a fixed point in time with the resolution necessary to produce useful and insightful interpretation. While this research focuses on the application of geophysical and topographic survey in the United Kingdom and United States to a mound or mound group, this methodology and the associated outcomes can be valuable more globally not only for archaeology, but also heritage management.

<p>We evaluated 3-D imaging of coarse root structure and biomass using ground-penetrating radar (GPR). GPR surveys were conducted in a white pine forest in southern Ontario, Canada. GPR profiles were obtained across two test plots (6 and 17 m² area), using 1-GHz GPR and a MEMS (micro-electro-mechanical systems) accelerometer. Test plot surveys evaluated the effects of micro-topography, soil moisture content, and root diameter and spacing. In addition, with the aid of the outcome of the control test plots two other plots (25 and 400 m²area) were surveyed with varying line sample spacing to investigate the restraints on resolution brought about by line sampling density.</p> <p>Accounting for antenna tilt is necessary to determine an accurate and more precise position of root mass. The antenna tilt was >45^o pitch, >28^o roll and up to 10^o yaw due to surface micro-topography of the forest floor. Vector 3-D imaging enhanced the diffraction amplitude (15.5% increase) and centralized the position of the root. Radial surveys provided root continuity and produced better root imaging.</p> <p>GPR largely underestimates coarse root biomass when a line spacing of 25 cm is used. However similar results are found with smaller line spacing (12.5 cm). A maximum line spacing of 10 cm provided continuous root structure and differentiation of roots spaced 10 cm apart and greater. A sampling line spacing of 5 cm and an inline sampling interval of 0.5 cm in low soil moisture conditions provided the detection of roots that were a minimum of 1.4 cm in diameter.</p> / Master of Science (MSc)

This thesis investigates the application of In-Situ Recycling and provides guidelines for localities to aid in the selection of recycling methods, as well as documents a local government's experience with Cold In-Place Recycling. The recycling methods discussed in this study include Cold In-Place Recycling (CIR), Hot In-Place Recycling (HIR), and Full Depth Reclamation (FDR). These methods are performed onsite and in-place in a continuous process of milling, mixing, and placement. The In-Situ Recycling guidelines include suggestions based on: traffic characteristics, existing road condition, distress types, road access, local climate, road geometry, and other road characteristics. The guidelines are based on information from sources including NCHRP Synthesis 421, American Recycling and Reclamation Association (ARRA), FHWA, and state agencies with recycling experience. This study also resulted in documenting obstacles that localities may face when in-situ recycling, as well as the impact of limited experience with recycling. The study also evaluated the construction of Cold In-Place Recycled pavement sections in Christiansburg, VA, using Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR). Additionally, using the FWD and GPR data, alternate recycled designs were proposed in addition to a cost comparison to a conventional design. / Master of Science

[EN] Over time, due to multiple operational and maintenance activities, the networks of water supply systems (WSSs) undergo interventions, modifications or even are closed. In many cases, these activities are not properly registered. Knowledge of the paths and characteristics (status and age, etc.) of the WSS pipes is obviously necessary for efficient and dynamic management of such systems. This problem is greatly augmented by considering the detection and control of leaks. Access to reliable leakage information is a complex task. In many cases, leaks are detected when the damage is already considerable, which brings high social and economic costs. In this sense, non-destructive methods (e.g., ground penetrating radar - GPR) may be a constructive response to these problems, since they allow, as evidenced in this thesis, to ascertain paths of pipes, identify component characteristics, and detect primordial water leaks. Selection of GPR in this work is justified by its characteristics as non-destructive technique that allows studying both metallic and non-metallic objects. Although the capture of information with GPR is usually successful, such aspects as the capture settings, the large volume of generated information, and the use and interpretation of such information require high level of skill and experience. This dissertation may be seen as a step forward towards the development of tools able to tackle the problem of lack of knowledge on the WSS buried assets. The main objective of this doctoral work is thus to generate tools and assess their feasibility of application to the characterization of components of WSSs from GPR images. In this work we have carried out laboratory tests specifically designed to propose, develop and evaluate methods for the characterization of the WSS buried components. Additionally, we have conducted field tests, which have enabled us to determine the feasibility of implementing such methodologies under uncontrolled conditions. The methodologies developed are based on techniques of intelligent data analysis. The basic principle of this work has involved the processing of data obtained through the GPR to look for useful information about WSS components, with special emphasis on the pipes. After performing numerous activities, one can conclude that, using GPR images, it is feasible to obtain more information than the typical identification of hyperbolae currently performed. In addition, this information can be observed directly, e.g. more simply, using the methodologies proposed in this doctoral work. These methodologies also prove that it is feasible to identify patterns (especially with the preprocessing algorithm termed Agent race) that provide fairly good approximation of the location of leaks in WSSs. Also, in the case of pipes, one can obtain such other characteristics as diameter and material. The main outcomes of this thesis consist in a series of tools we have developed to locate, identify and visualize WSS components from GPR images. Most interestingly, the data are synthesized and reduced so that the characteristics of the different components of the images recorded in GPR are preserved. The ultimate goal is that the developed tools facilitate decision-making in the technical management of WSSs, and that such tools can even be operated by personnel with limited experience in handling non-destructive methodologies, specifically GPR. / [ES] Con el paso del tiempo, y debido a múltiples actividades operacionales y de mantenimiento, las redes de los sistemas de abastecimiento de agua (SAAs) sufren intervenciones, modificaciones o incluso, son clausuradas, sin que, en muchos casos, estas actividades sean correctamente registradas. El conocimiento de los trazados y características (estado y edad, entre otros) de las tuberías en los SAAs es obviamente necesario para una gestión eficiente y dinámica de tales sistemas. A esta problemática se suma la detección y el control de las fugas de agua. El acceso a información fiable sobre las fugas es una tarea compleja. En muchos casos, las fugas son detectadas cuando los daños en la red son ya considerables, lo que trae consigo altos costes sociales y económicos. En este sentido, los métodos no destructivos (por ejemplo, ground penetrating radar - GPR), pueden ser una respuesta a estas problemáticas, ya que permiten, como se pone de manifiesto en esta tesis, localizar los trazados de las tuberías, identificar características de los componentes y detectar las fugas de agua cuando aún no son significativas. La selección del GPR, en este trabajo se justifica por sus características como técnica no destructiva, que permite estudiar tanto objetos metálicos como no metálicos. Aunque la captura de información con GPR suele ser exitosa, la configuración de la captura, el gran volumen de información, y el uso y la interpretación de la información requieren de alto nivel de habilidad y experiencia por parte del personal. Esta tesis doctoral se plantea como un avance hacia el desarrollo de herramientas que permitan responder a la problemática del desconocimiento de los activos enterrados de los SAAs. El objetivo principal de este trabajo doctoral es, pues, generar herramientas y evaluar la viabilidad de su aplicación en la caracterización de componentes de un SAA, a partir de imágenes GPR. En este trabajo hemos realizado ensayos de laboratorio específicamente diseñados para plantear, elaborar y evaluar metodologías para la caracterización de los componentes enterrados de los SAAs. Adicionalmente, hemos realizado ensayos de campo, que han permitido determinar la viabilidad de aplicación de tales metodologías bajo condiciones no controladas. Las metodologías elaboradas están basadas en técnicas de análisis inteligentes de datos. El principio básico de este trabajo ha consistido en el tratamiento adecuado de los datos obtenidos mediante el GPR, a fin de buscar información de utilidad para los SAAs respecto a sus componentes, con especial énfasis en las tuberías. Tras la realización de múltiples actividades, se puede concluir que es viable obtener más información de las imágenes de GPR que la que actualmente se obtiene con la típica identificación de hipérbolas. Esta información, además, puede ser observada directamente, de manera más sencilla, mediante las metodologías planteadas en este trabajo doctoral. Con estas metodologías se ha probado que también es viable la identificación de patrones (especialmente el pre-procesado con el algoritmo Agent race) que proporcionan aproximación bastante acertada de la localización de las fugas de agua en los SAAs. También, en el caso de las tuberías, se puede obtener otro tipo de características tales como el diámetro y el material. Como resultado de esta tesis se han desarrollado una serie de herramientas que permiten visualizar, identificar y localizar componentes de los SAAs a partir de imágenes de GPR. El resultado más interesante es que los resultados obtenidos son sintetizados y reducidos de manera que preservan las características de los diferentes componentes registrados en las imágenes de GPR. El objetivo último es que las herramientas desarrolladas faciliten la toma de decisiones en la gestión técnica de los SAAs y que tales herramientas puedan ser operadas incluso por personal con una experiencia limitada en el manejo / [CA] Amb el temps, a causa de les múltiples activitats d'operació i manteniment, les xarxes de sistemes d'abastament d'aigua (SAAs) se sotmeten a intervencions, modificacions o fins i tot estan tancades. En molts casos, aquestes activitats no estan degudament registrats. El coneixement dels camins i característiques (estat i edat, etc.) de les canonades d'aigua i sanejament fa evident la necessitat d'una gestió eficient i dinàmica d'aquests sistemes. Aquest problema es veu augmentat en gran mesura tenint en compte la detecció i control de fuites. L'accés a informació fiable sobre les fuites és una tasca complexa. En molts casos, les fugues es detecten quan el dany ja és considerable, el que porta costos socials i econòmics. En aquest sentit, els mètodes no destructius (per exemple, ground penetrating radar - GPR) poden ser una resposta constructiva a aquests problemes, ja que permeten, com s'evidencia en aquesta tesi, per determinar rutes de canonades, identificar les característiques dels components, i detectar les fuites d'aigua quan encara no són significatives. La selecció del GPR en aquest treball es justifica per les seves característiques com a tècnica no destructiva que permet estudiar tant objectes metàl·lics i no metàl·lics. Tot i que la captura d'informació amb GPR sol ser reeixida, aspectes com ara la configuració de captura, el gran volum d'informació que es genera, i l'ús i la interpretació d'aquesta informació requereix alt nivell d'habilitat i experiència. Aquesta tesi pot ser vista com un pas endavant cap al desenvolupament d'eines capaces d'abordar el problema de la manca de coneixement sobre els actius d'aigua i sanejament enterrat. L'objectiu principal d'aquest treball doctoral és, doncs, generar eines i avaluar la seva factibilitat d'aplicació a la caracterització dels components de los SAAs, a partir d'imatges GPR. En aquest treball s'han dut a terme proves de laboratori específicament dissenyats per proposar, desenvolupar i avaluar mètodes per a la caracterització dels components d'aigua i sanejament soterrat. A més, hem dut a terme proves de camp, que ens han permès determinar la viabilitat de la implementació d'aquestes metodologies en condicions no controlades. Les metodologies desenvolupades es basen en tècniques d'anàlisi intel·ligent de dades. El principi bàsic d'aquest treball ha consistit en el tractament de dades obtingudes a través del GPR per buscar informació útil sobre els components d'SAA, amb especial èmfasi en la canonades. Després de realitzar nombroses activitats, es pot concloure que, amb l'ús d'imatges de GPR, és factible obtenir més informació que la identificació típica d'hipèrboles realitzat actualment. A més, aquesta informació pot ser observada directament, per exemple, més simplement, utilitzant les metodologies proposades en aquest treball doctoral. Aquestes metodologies també demostren que és factible per identificar patrons (especialment el pre-processat amb l'algoritme Agent race) que proporcionen bastant bona aproximació de la localització de fuites en SAAs. També, en el cas de tubs, es pot obtenir altres característiques com ara el diàmetre i el material. Els principals resultats d'aquesta tesi consisteixen en una sèrie d'eines que hem desenvolupat per localitzar, identificar i visualitzar els components dels SAAS a partir d'imatges GPR. El resultat més interessant és que els resultats obtinguts són sintetitzats i reduïts de manera que preserven les característiques dels diferents components registrats en les imatges de GPR. L'objectiu final és que les eines desenvolupades faciliten la presa de decisions en la gestió tècnica de SAA, i que tals eines poden fins i tot ser operades per personal amb poca experiència en el maneig de metodologies no destructives, específicament GPR. / Ayala Cabrera, D. (2015). Characterization of components of water supply systems from GPR images and tools of intelligent data analysis [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/59235 / Premios Extraordinarios de tesis doctorales