Title: The Vranov Dam and the village of Bítov in the context of 20th century history Author: Bc. Eva Šabatková Department: History & History Didactics Department Supervisor: doc. PhDr. Alena Míšková, Ph.D. Abstract: This thesis is focused on the construction of the Vranov Dam and its consequences. It describes a development of dams both in the Czech republic and in the world. It also analyses reasons for a regulation of the Dyje river, possible alternatives and historical events leading to development of hydroengineering structure near the village of Vranov nad Dyjí. The paper is also focused on people's lives in the village of Bítov, which had to be flooded with regards to construction of the dam. Proposed alternatives of architectonical solution of the new village Bítov, which was built as a replacement for inhabitants of "old" Bítov, are presented, as well as the life of Georg Haas von Hasenfels, the last owner of the Bítov Castle and its abutting domain. The impact of the Vranov Dam on life in today's Bítov is mentioned and discussed at the end of the paper. Keywords: The Vranov Dam, development, Bítov, water service, Georg Haas von Hasenfels

The interplay of partially filled d- or f-electron shells with conduction-band electrons is a key ingredient in new rare-earth transition-metal compounds for the emergence of unusual electronic and magnetic properties. Among which unconventional superconductivity is one of the most studied. Despite many years of intensive experimental investigations and plenty promising theoretical models, unconventional superconductivity still remains hotly debated a very rich topic. One of the fundamental unsolved problems for condensed-matter physicists is the mechanism that causes the electrons to form anisotropic superconductivity. Since electrons in the vicinity of the Fermi level are primarily responsible for superconductivity, in order to better understand the mechanism giving rise to this phenomenon and the origin of complex forces between correlated electrons, knowledge of the Fermi surface and band selective effective mass is essential. Of the many techniques used to study electronic band-structure properties, measurements of quantum oscillations in the magnetization, so-called de Haas-van Alphen (dHvA) effect, in combination with band-structure calculations is the traditional proven tool for studying Fermi-surface topology and quasiparticle effective mass. In the present work, electronic structure and Fermi-surface properties of Ybsubstituted heavy fermion superconductor CeCoIn5 and iron based ternary phosphides LaFe2P2 and CeFe2P2 have been investigated by means of dHvA measurements. For these measurements, capacitive cantilever-torque magnetometry was utilized. In Ce1−xYbxCoIn5, the evolution of the Fermi surface and effective mass was studied as a function of Yb concentration. The observed topology change is consistent with what is expected from the band-structure calculations. For a small Yb concentration, x = 0.1, the band-structure topology and the effective masses remain nearly unchanged compared to CeCoIn5. This contrasts clearly modified Fermi surfaces and light, almost unrenormalized effective masses for x = 0.2 and above. For LaFe2P2 and CeFe2P2, the obtained effective masses are light. Good agreement between the calculated and measured dHvA frequencies was identified only for LaFe2P2. However, for CeFe2P2 strong disagreement was observed. Moreover, different CeFe2P2 single crystals reveal different experimental results. In order to reconcile the results of the dHvA measurements and density-functional-theory calculations more work is necessary.

Nous présentons dans ce travail la caractérisation, essentiellement en transport, de couches de graphène épitaxiés élaborées par sublimation contrôlée de carbure de silicium (SiC). Des mesures de transport électroniques sont effectuées à basse température (T~1,6 K) et à fort champ magnétique. Dans une première partie, Il est indispensable de se focaliser sur la méthode spécifique (‘graphite cap') utilisée pour la fabrication de tous les échantillons étudiés dans ce travail au CNM, Barcelone. La méthode de ‘graphite cap' permet d'obtenir des couches de graphène en formes de rubans suffisamment isolés entre eux pour la fabrication de dispositifs électroniques. La croissance de graphène donne des résultats très différents suivant les conditions de croissance et les spécificités du substrat de carbure de silicium employé : les échantillons obtenus sur face carbone, et les échantillons sur face silicium.Sur face carbone, deux polytypes de SiC ont été utilisés pour l'élaboration de graphène : (i) sur le polytype ‘6H-SiC (on axis)', des rubans de graphène de l'ordre de 600 µm de longueur et de 6 µm de largeur sont obtenus. La largeur de graphène reste faible car le graphène suit la formation des marches sur le SiC résultant de la reconstruction de la surface pendant la croissance (‘step bunching'). Des monocouches ont été identifiées par spectroscopie Raman. Les résultats de transport sur ces monocouches montrent que la concentration de porteurs, de type trous, varie entre 5x1012cm-2 et 5x1013cm-2. L'effet Hall quantique n'est pas observé à cause du dopage élevé. Mais des oscillations de Shubnikov de Haas ont été bien résolues et étudiées pour extraire leurs phases. La phase des oscillations est égale à zéro, ce qui est une signature de la présence d'une monocouche de graphène.(ii) sur le polytype ‘4H-SiC (8° off axis)', les rubans obtenus sont plus larges et peuvent atteindre une longueur de 600 µm et une largeur de 50 µm. L'utilisation d'un substrat SiC avec une désorientation intentionnelle lors du clivage de la surface initiale permet la coalescence des rubans de graphène. Les résultats de transport sur les monocouches montrent que les porteurs sont toujours de type trous, mais beaucoup moins dopé sur plusieurs monocouches (de l'ordre 8x1011cm-2). L'effet Hall quantique est reporté sur un échantillon dont la mobilité atteint 11 000 cm²/V.s. Une étude à bas champ magnétique est encore réalisée et donnent des informations intéressantes sur l'(anti)localisation faible. Tous les phénomènes quantiques observés sont des signatures sur les propriétés intrinsèques des monocouches de graphène. Pour mieux appréhender le graphène épitaxié, il est important de faire varier la concentration de porteurs. Pour cela, une autre approche est proposée. Nous avons fabriqué une face arrière d'un échantillon semi-isolant par implantation d'ions d'azotes dans le SiC avant la croissance de graphène. Les résultats de transport obtenus sur les monocouches de graphène ont montré l'efficacité de cette grille pour contrôler le type de porteurs. L'effet Hall quantique a été observé pour les deux types de porteurs avec des plateaux de Hall remarquables en largeur (23 T).Sur la face Si, des multicouches de graphène couvrent uniformément toute la surface du substrat. Les multicouches de graphène sont plus épaisses sur les bords de marches que sur les terrasses, identifiées par spectroscopie Raman. Les porteurs sont maintenant de type électrons grâce à la couche de tampon qui existe sur la face Si. Les résultats de transport en champ magnétique et à basse température détectent l'existence d'une anisotropie électrique dues principalement aux marches du substrat SiC. / In this work, we present the characterization, mainly in transport, of epitaxial graphene layers produced by controlled sublimation of silicon carbide substrate (SiC). Electronic transport measurements are performed at low temperature (T ~ 1.6 K) and high magnetic field. In the first part, we explain the specific method ('graphite cap') used for growth of the samples studied in this work at CNM, Barcelona. The method of 'graphite cap' provides graphene ribbons homogeneous and isolated for the fabrication of electronic devices.Graphene on SiC gives very different results depending on the conditions of growth (temperature, pressure…) and the face of SiC substrate used: carbon face (C-face) or silicon face (Si-face).On the carbon face, two SiC polytypes have been used for the graphene growth:(i) On axis 6H-SiC: graphene ribbons are obtained on the whole surface. The length of ribbon approaches 600 µm and the width do not exceed 6 µm. The graphene follows the formation of steps on the SiC resulting from surface reconstruction during growth (‘step bunching'), which affects the graphene width. Monolayers were identified by Raman spectroscopy. For all measured samples, we found that the graphene is p-typed doped with a Hall concentration between 5x1012 and 5x1013cm-2. The quantum Hall effect is not observed because of the high doping level. But the Shubnikov de Haas oscillations (SdH) have been well resolved and studied. The phase of the oscillations is equal to zero, which is a signature from the presence of graphene monolayer.(ii) 8° off axis 4H-SiC: graphene ribbons obtained are larger and can reach a length of 600 µm and a width of 50 µm. The use of a SiC substrate with intentional disorientation upon cleavage of the initial surface allows the coalescence of the graphene ribbons. For all measured devices on this sample, we found that the graphene is p-typed doped (as determined from the sign of the Hall effect) with a Hall concentration between 8x1011 and 1013 cm-2. Mobilities varied between 1000 and 11000 cm²/Vs from device to device at 4K. Magnetoresistance revealed both Shubnikov-de Haas (SdH) oscillations, and interference phenomena (weak localization and antilocalization). For some low doped devices, Quantum Hall effect was observed. All quantum phenomena observed are signatures on the intrinsic properties of graphene monolayers.The main drawback of the epitaxial growth technique is the difficulty to control of the carrier density. Here, we investigate a bottom gate of a graphene device, epitaxially grown on the C-face of SiC substrate. The gate was realized by Nitrogen atoms implantation in the SiC crystal. The transport measurements have shown the effectiveness of the gate to control the type of carriers. The quantum Hall effect was observed for both types of carriers with remarkable Hall plateaus width (23 T).On the silicon face, we discuss results obtained from few layer graphene (FLG) grown epitaxially on the (0001) surface of a 6H-SiC substrate. Carriers are now like electrons through the buffer layer that exists on the Si face. The resulting FLG uniformly covers the substrate on which large step bunched terraces are also visible. The FLG is thicker at the step edges, as evidenced by micro-Raman analysis. Indeed, a noticeable anisotropy of the resistance has been detected by magnetotransport measurements at low temperature and high magnetic field. We will argue that this anisotropy originates from different mobilities, in the terraces and at the step edges.

No description available.

The interplay of partially filled d- or f-electron shells with conduction-band electrons is a key ingredient in new rare-earth transition-metal compounds for the emergence of unusual electronic and magnetic properties. Among which unconventional superconductivity is one of the most studied. Despite many years of intensive experimental investigations and plenty promising theoretical models, unconventional superconductivity still remains hotly debated a very rich topic. One of the fundamental unsolved problems for condensed-matter physicists is the mechanism that causes the electrons to form anisotropic superconductivity. Since electrons in the vicinity of the Fermi level are primarily responsible for superconductivity, in order to better understand the mechanism giving rise to this phenomenon and the origin of complex forces between correlated electrons, knowledge of the Fermi surface and band selective effective mass is essential. Of the many techniques used to study electronic band-structure properties, measurements of quantum oscillations in the magnetization, so-called de Haas-van Alphen (dHvA) effect, in combination with band-structure calculations is the traditional proven tool for studying Fermi-surface topology and quasiparticle effective mass. In the present work, electronic structure and Fermi-surface properties of Ybsubstituted heavy fermion superconductor CeCoIn5 and iron based ternary phosphides LaFe2P2 and CeFe2P2 have been investigated by means of dHvA measurements. For these measurements, capacitive cantilever-torque magnetometry was utilized. In Ce1−xYbxCoIn5, the evolution of the Fermi surface and effective mass was studied as a function of Yb concentration. The observed topology change is consistent with what is expected from the band-structure calculations. For a small Yb concentration, x = 0.1, the band-structure topology and the effective masses remain nearly unchanged compared to CeCoIn5. This contrasts clearly modified Fermi surfaces and light, almost unrenormalized effective masses for x = 0.2 and above. For LaFe2P2 and CeFe2P2, the obtained effective masses are light. Good agreement between the calculated and measured dHvA frequencies was identified only for LaFe2P2. However, for CeFe2P2 strong disagreement was observed. Moreover, different CeFe2P2 single crystals reveal different experimental results. In order to reconcile the results of the dHvA measurements and density-functional-theory calculations more work is necessary.

Highly correlated electron materials are systems in which many new states of matter can emerge. A particular situation which favours the formation of exotic phases of the electron liquid in complex materials is that where a quantum critical point (QCP) is present in the phase diagram. Neighbouring regions in parameter space reveal unusual physical properties, described as non-Fermi liquid behaviour. One of the important problems in quantum criticality is to find out how the Fermi surface (FS) of a material evolves near a QCP. The traditional method for studying the FS of materials is the de Haas van Alphen effect (dHvA). A quantum critical end point (QCEP) has been reported in the highly correlated metal Sr₃Ru₂O₇, which is tuned using a magnetic field high enough to perform the dHvA experiment. It moreover features a new emergent phase in the vicinity of the QCEP, a nematic type of electron ordering. The subject of this thesis is the study of the FS of Sr₃Ru₂O₇ using the dHvA effect. Three aspects were explored. The first was the determination of the FS at fields both above and below that where the QCEP arises. The second was the search for quantum oscillations inside the nematic phase. The third was a reinvestigation of the behaviour of the quasiparticle effective masses near the FS. In collaboration with angle resolved photoemission spectroscopy experimentalists, a complete robust model for the FS of Sr₃Ru₂O₇ at zero fields was determined. Moreover, the new measurements of the quasiparticle masses revealed that no mass enhancements exist anywhere around the QCEP, in contradiction with previous specific heat data and measurements of the A coefficient of the power law of the resistivity. Finally, we report dHvA oscillations inside the nematic phase, and the temperature dependence of their amplitude suggests strongly that the carriers consist of Landau quasiparticles.

No description available.

No description available.

Entre as principais dificuldades que os sistemas de tratamento de esgotos domésticos compostos por lagoas de estabilização enfrentam para atender as exigências impostas pela Resolução CONAMA 357/2005 podem se destacar as concentrações elevadas de nitrogênio amoniacal, fósforo e coliformes fecais e totais. Estes últimos, quando os sistemas utilizam corpos receptores classe 2 ou 3 geram a necessidade de desinfecção. Dentre as diversas tecnologias disponíveis para a desinfecção dos esgotos, a cloração é bastante atrativa pelo custo reduzido, em relação às outras tecnologias, bem como pela elevada experiência que as companhias e municipalidades possuem neste tipo de sistema, advinda dos sistemas de tratamento de água. Dentre os sistemas de cloração, o uso de hipoclorito de sódio torna-se interessante pela segurança, simplicidade das instalações e de operação. A desvantagem do uso deste tipo de sistema se dá na possibilidade da formação de subprodutos tóxicos, dentro os quais pode-se destacar os trihalometanos (THMs) e os ácidos haloacéticos (AHAs), porém esta formação pode ser teoricamente reduzida pela presença de elevadas concentrações de nitrogênio amoniacal nos efluentes destes sistemas, por sua reação preferencial com o cloro, na formação de cloraminas. Outras possibilidades de redução na formação é reduzir a concentração de precursores, reduzir a dosagem de cloro e utilizar método de descloração dos efluentes após a desinfecção. Este trabalho, ambientado no desenvolvimento das pesquisas do Edital 4 do PROSAB/FINEP (Programa Nacional de Pesquisa em Saneamento Básico), desenvolveu testes de desinfecção em efluentes de lagoas anaeróbias e facultativas utilizando como desinfetante hipoclorito de sódio, em dosagens de 8,0 mgCl/L e 12,0 mgCl/L. Desenvolveu também testes de desinfecção com efluentes anaeróbios e facultativos pós-tratados por meio de coagulação/floculação/sedimentação e coagulação/floculação/flotação com ar dissolvido, com dosagens de 2,0 mgCl/L e 4,0 mgCl/L. Para todos os testes de desinfecção foram realizados também testes de descloração das amostras. Desta forma foi possível estudar, dentro de uma faixa limitada, as possibilidades de reduzir a formação de subprodutos tóxicos na desinfecção de efluentes de lagoas de estabilização com hipoclorito de sódio. Nas amostras foram determinados por meio de cromatografia gasosa as concentrações dos THMs e AHAs. Por meio das metodologias do Standard Methods 20th Edition foram realizadas as análises físico-químicas dos parâmetros pH, temperatura, DQO, DBO, Ntotal, N-NH3, NTK, cloro livre, cloraminas, coliformes e outros microrganismos indicadores. A formação de THMs se mostrou bastante pequena, em média abaixo dos 20,0 µg/L em todos os testes, aparentemente devido às elevadas concentrações de N-NH3, da ordem de 30,0 mg/L. O mesmo não ocorreu com os AHAs. Em muitos testes a concentração encontrada de AHAs totais superou o padrão de 80,0 µg/L preconizados pela USEPA para água potável, e aqui adotado como padrão comparativo. A descloração reduziu em média 52% a concentração de AHAs nos testes, colocando quase todas as amostras dentro do padrão de 80,0 µg/L. Os bioensaios mostraram que a presença de cloro livre nas amostras eleva a toxicidade aguda em Daphnia similis provocada pelos efluentes e que a cloração seguida de descloração produz efluentes com toxicidade inferior à toxicidade dos efluentes apenas clorados e toxicidade também inferior àquela dos efluentes sem cloração. / The main difficulties that the stabilization ponds for sewage treatment systems face to meet the requirements imposed by CONAMA Resolution 357/2005 can highlight the high concentrations of ammonia nitrogen, phosphorus and fecal and total coliform. When the systems use receivers water bodies Class 2 or 3 generate the need for disinfection. Among the different technologies available for the disinfection of sewage, the chlorination is very attractive at reduced cost compared to other technologies, as well as the high experience that companies and municipalities have in this type of system, because the water treatment systems. About the chlorination technologies, the use of sodium hypochlorite becomes interesting for security, simplicity of installation and operation. The disadvantage of using this type of system is given the possibility of formation of toxic by-products, within which you can highlight the trihalomethanes (THMs) and haloacetic acids (AHAs), but this formation can theoretically be reduced by the presence of high concentrations of ammoniacal nitrogen in effluents of these systems, for its preferential reaction with the chlorine in the formation of cloraminas. Other possibilities for reducing the training is to reduce the concentration of precursors (organic matter), reduce the dosage of chlorine and use dechlorination method after disinfection. This work, developed in PROSAB / FINEP (National Program for Research on Sanitation) research announcement number 4, developed tests for disinfection of anaerobic and facultative ponds effluents using sodium hypochlorite as a disinfectant, in concentrations of 8.0 mgCl/L and 12.0 mgCl/L. Were also developed tests for disinfection with anaerobic and facultative ponds effluents post-treated by coagulation / flocculation / sedimentation and coagulation / flocculation / flotation with dissolved air, with concentrations of 2.0 mgCl/L and 4.0 mgCl/L. For all of disinfection tests were also conducted dechlorination tests. This made it possible to study the possibilities of reducing the formation of toxic byproducts of the stabilization ponds effluents disinfection with sodium hypochlorite. The THMs and AHAS concentrations were determined by gas chromatography. Through the methods of Standard Methods 20th Edition analyses were carried out physical-chemical parameters of pH, temperature, COD, BOD, total nitrogen, ammoniacal nitrogen, total Kjeldhal nitrogen, free chlorine, chloramines, coliforms and other indicator microorganisms. The formation of THMs was very low, on average below the 20.0 µg/L in all tests, apparently due to high concentrations of NH3-N, the order of 30.0 mg/L. The same did not occur with AHAs. In many tests found concentrations of AHAs exceeded the standard of 80.0 µg/L recommended by the USEPA for drinking water. Dechlorination reduced 52% of AHAs concentrations, in average. Bioassays showed that the presence of free chlorine in the samples increase the acute toxicity in Daphnia similes. Chlorination followed by dechlorination produces effluents with less toxicity than the toxicity of chlorinated and effluent without chlorination.

The main aim of this thesis is an introduction of the company Haas Fertigbau, which is concerned with construction of wooden houses and after that making of a marketing strategy. This thesis is diveded into three main parts. In the first part of this thesis is analyzed the current situation of the timber industry and of the building. These two fields that like every others were affected by the global economic crisis. In the next part it is introduced a parent company Haas Fertigbau and afterwards there is in great detail described the company Haas Fertigbau based in Chanovice. In the last chapter there is a practical part of this thesis. It contains a partial approximation of the current marketing strategy, a proposal for a comprehensive marketing strategy and a number of recommendations which could be an inspiration for the company into the future.