Spelling suggestions: "subject:"high molecular weight"" "subject:"igh molecular weight""
31 |
Hvězdicovité polymerní nosiče léčiv pro cílenou dopravu a pH-řízené uvolňování léčiva / Star polymeric carriers of drugs for targeting and pH-dependent release of drugsBittner, Matyáš January 2013 (has links)
This diploma thesis brings new data about design, synthesis, physico-chemical characterisation and biological efficacy of the novel star-like HPMA-based conjugates intended for treatment of solid tumors. Recently, many different water-soluble drug delivery systems based on N-(2- hydroxypropyl)methacrylamide (HPMA) copolymers have been described. Here, we report synthesis and physico-chemical characterisation of high molecular weight star-like HPMA- based polymer carriers with low polydispersity prepared by controlled grafting of HPMA copolymers onto PAMAM dendrimer core. With the aim to keep the polydispersity of drug delivery system as low as possible, reversible Addition-Fragmentation Chain Transfer (RAFT) polymerisation was used for HPMA-based polymer precursor preparation. The end groups of the polymer presursors was afterwards used for grafting using carbodidimide condensation reaction or copper free click chemistry on polyamidoamine (PAMAM) dendrimers resulting in a formation of star-like high-molecular-weight (HMW) drug carriers. Described synthetic procedure provided preparation of star-like HMW drug carriers with Mw between 1.105 - 3.105 g/mol and narrow distribution of Mw. The model drug, doxorubicin (Dox), was attached to the hydrazide group containing polymer cariers by pH- sensitive...
|
32 |
Stochastic representation and analysis of rough surface topography by random fields and integral geometry – Application to the UHMWPE cup involved in total hip arthroplasty / Modélisation stochastique et analyse de topographie de surfaces rugueuses par champs aléatoire et géométrie intégrale – Application aux cupules à double mobilité pour prothèse totale de hancheAhmad, Ola 23 September 2013 (has links)
La topographie d'une surface se compose généralement de plusieurs échelles, depuis l'échelle macroscopique (sa géométrie physique), jusqu'aux échelles microscopiques ou atomiques appelées rugosité. L'évolution spatiale et géométrique de la rugosité fournit une description plus complète de la surface, et une interprétation physique de certains problèmes importants tels que le frottement et les mécanismes d'usure pendant le contact mécanique entre deux surfaces. La topographie d'une surface rugueuse est de nature aléatoire, ce qui traduit par des altitudes spatialement corrélées, appelées pics et vallées. La relation entre leurs densités de probabilité et leurs propriétés géométriques sont les aspects fondamentaux qui ont été développés dans cette thèse, en utilisant la théorie des champs aléatoires et la géométrie intégrale. Un modèle aléatoire approprié pour représenter une surface rugueuse a été mis en place et étudié au moyen des paramètres les plus significatifs, dont les changements influencent la géométrie des ensembles de niveaux (excursion sets) de cette surface. Les ensembles de niveaux ont été quantifiés par des fonctionnelles connues sous le nom de fonctionnelles de Minkowski, ou d'une manière équivalente sous le nom de volumes intrinsèques. Dans un premier temps, les volumes intrinsèques des ensembles de niveaux sont calculés analytiquement sur une classe de modèles mixtes, qui sont définis par la combinaison linéaire d'un champ aléatoire Gaussien et d'un champ de t-student (t-field), et ceux d'une classe de champs aléatoires asymétriques appelés skew-t. Ces volumes sont comparés et testés sur des surfaces produites par des simulations numériques. Dans un second temps, les modèles aléatoires proposés ont été appliqués sur des surfaces réelles acquises à partir d'une cupule d'UHMWPE (provenant d’une prothèse totale de hanche) avant et après les processus d'usure. Les résultats ont montré que le champ aléatoire skew-t est un modèle mieux approprié pour décrire la rugosité de surfaces usées, contrairement aux modèles adoptés dans la littérature. Une analyse statistique, basée sur le champ aléatoire skew-t, est ensuite proposée pour détecter les niveaux des pics/vallées de la surface usée et pour décrire le comportement et la fonctionnalité de la surface usée. / Surface topography is, generally, composed of many length scales starting from its physical geometry, to its microscopic or atomic scales known by roughness. The spatial and geometrical evolution of the roughness topography of engineering surfaces avail comprehensive understanding, and interpretation of many physical and engineering problems such as friction, and wear mechanisms during the mechanical contact between adjoined surfaces. Obviously, the topography of rough surfaces is of random nature. It is composed of irregular hills/valleys being spatially correlated. The relation between their densities and their geometric properties are the fundamental topics that have been developed, in this research study, using the theory of random fields and the integral geometry.An appropriate random field model of a rough surface has been defined by the most significant parameters, whose changes influence the geometry of its excursion. The excursion sets were quantified by functions known as intrinsic volumes. These functions have many physical interpretations, in practice. It is possible by deriving their analytical formula to estimate the parameters of the random field model being applied on the surface, and for statistical analysis investigation of its excursion sets. These subjects have been essentially considered in this thesis. Firstly, the intrinsic volumes of the excursion sets of a class of mixture models defined by the linear combination of Gaussian and t random fields, then for the skew-t random fields are derived analytically. They have been compared and tested on surfaces generated by simulations. In the second stage, these random fields have been applied to real surfaces measured from the UHMWPE component, involved in application of total hip implant, before and after wear simulation process. The primary results showed that the skew-t random field is more adequate, and flexible for modelling the topographic roughness. Following these arguments, a statistical analysis approach, based on the skew-t random field, is then proposed. It aims at estimating, hierarchically, the significant levels including the real hills/valleys among the uncertain measurements. The evolution of the mean area of the hills/valleys and their levels enabled describing the functional behaviour of the UHMWPE surface over wear time, and indicating the predominant wear mechanisms.
|
33 |
Avaliação da participação dos receptores do tipo Toll e lectinas tipo C na supressão da resposta imune induzida por componentes de alta massa molecular do extrato de Ascaris suum. / Evaluation of the involvement of Toll like and C-type lectin receptors in the immunessuppression induced by high molecular weight components from Ascaris suum extract.Favoretto, Bruna Cristina 25 May 2010 (has links)
Helmintos e seus produtos são potentes moduladores da resposta imune. Componentes de alta massa molecular do extrato de Ascaris suum (PI) suprimem a resposta anti-ovalbumina. Nas células apresentadoras de antígeno (APCs) como as dendríticas (DCs) os componentes do PI inibem a expressão de moléculas MHC-II e coestimuladoras e, assim a ativação de linfócitos TCD4+. Receptores de membrana de APCs como os do tipo Toll (TLRs) e lectina tipo-C (CLRs) reconhecem padrões moleculares de patógenos e modulam a resposta imune efetora. Assim sendo, foi estudada o papel de TLRs e CLRs expressos nas APCs na supressão induzida por PI. Pôde-se observar que o PI inibe a expressão de TLR1, 2 e 4 na fase de indução da resposta adaptativa. O efeito supressor do PI na resposta anti-OVA e na maturação de DCs é independente de TLR2 e 4, entretanto os CLRs parecem estar envolvidos nesse processo. Portanto, estes dados podem contribuir no esclarecimento dos mecanismos de ação de substâncias imunossupressoras. / Helminths and antigens derived from them are potent immunemodulators. High molecular weight components of Ascaris suum extract (PI) suppress the anti-ovalbumin response. The PI components inhibit in antigen-presenting cells (APCs), as dendritic cells (DCs), the expression of MHC-II and coestimulatory molecules and, thus the CD4 + T cells activation. APCs via membrane receptors, as the Toll like (TLRs) and C-type lectin (CLRs), recognize distinct pathogens and then promote the effector immune response. Therefore, it was studied the role of TLRs and CLRs expressed on APCs in immunesuppression induced by PI. It was observed that PI inhibited the expression of TLR1, 2, 4 and 9 in the induction phase of adaptive response. The suppressive effect of PI in anti-OVA response and DCs maturation was independent of TLR2 and TLR4, however the CLRs seem to be involved in this process. These data can contribute to clarify the action mechanisms of immunosuppressive molecules.
|
34 |
Approche des mécanismes de frittage du UHMWPE : étude du comportement mécanique à l’état solide et à l’état fondu / Approach of sintering mechanisms of UHMWPE : study of the mechanical behavior in the solid state and in the melt stateDeplancke, Tiana 13 December 2013 (has links)
Le polyéthylène à ultra haute masse molaire (UHMWPE) présente une viscosité si forte à l’état fondu que seuls des procédés de mise en forme de type frittage peuvent être employé. Ce procédé rarement utilisé pour les polymères reste peu étudié. En particulier les deux principaux mécanismes généralement mentionnés que sont le réenchevêtrement et la cocristallisation aux interfaces sont difficilement observables séparément. Le UHMWPE, grâce à sa très haute viscosité à l’état fondu et grâce à son plateau caoutchoutique extrêmement étendue en température, peut faire l’objet d’essais mécaniques à la fois à l’état semi-cristallin et à l’état fondu. Des poudres natives de UHMWPE de masses molaires comprises entre 0,6 et 10,5 Mg.mol-1 sont utilisées comme matériau de départ pour leur mise en oeuvre par frittage. La consolidation des interfaces par soudage des particules a été effectuée sous pression à différentes températures supérieures au point de fusion et pour différentes durées. Des expériences de traction effectuées soit à température ambiante soit au-dessus du point de fusion ont permis de distinguer le rôle de l'interdiffusion des chaînes au travers des interfaces de celle de la cocristallisation dans les mécanismes de soudage de particules. Il s'est avéré qu’un soudage efficace se produit dans une échelle de temps très courte. La très faible influence de la durée de frittage par rapport à celle de la température de frittage a prouvé que l'interdiffusion des chaînes n'est pas régie par un mécanisme de reptation. L'explosion à la fusion des cristaux « hors-équilibre » de la poudre native est suggérée être le mécanisme principal permettant un réenchevêtrement dans un laps de temps beaucoup plus court que celui de la reptation. La cocristallisation est un phénomène si efficace dans la consolidation de l'interface à l'état solide qu'elle masque significativement la cinétique de réenchevêtrement gouverné par la température, visible dans les tests mécaniques à l’état fondu. / One of the main issues of ultra-high-molecular-weight polyethylene (UHMWPE) is to overcome its very high viscosity. Powder sintering is then often required instead of injection or extrusion. However, sintering mechanisms remain partially understood. Indeed, the two main mechanisms generally mentioned for interparticle welding, i.e. re-entanglement and cocrystallization, can hardly be observed separately. Fortunately, due to its very high molecular weight, UHMWPE exhibits an exceptionally broad rubbery plateau so that mechanical tensile tests can be easily performed both below and above the melting point. Four UHMWPE of molecular weight in the range of 0.6.106 g.mol-1 to 10.5.106 g.mol-1 have been processed by means of sintering of nascent powders. The interface consolidation or particle welding was carried out under pressure at various temperatures above the melting point and for various durations. Tensile drawing experiments performed either at room temperature or above the melting point enabled to discriminate the role of chain interdiffusion through the particle interface from that of cocrystallization in the mechanism of particle welding. It turned out that an efficient welding occurred within a very short time scale. The very weak influence of sintering time compared to that of sintering temperature gave evidence that chain interdiffusion was not governed by a reptation mechanism. The entropy-driven melting explosion of the “non-equilibrium” crystals in the nascent powder is suggested to be the main mechanism of the fast chain reentanglement and subsequent particle welding within a time scale much shorter than the reptation time. Cocrystallization is so much efficient in the interface consolidation in the solid state that it significantly hides the temperature-governed kinetics.
|
35 |
Association of Adiponectin Profiles with Dietary Carbohydrate Intake, Feeding, Gender, Body Weight, Fat Mass, and Insulin Sensitivity in Healthy Young Cats (Felis catus)Heok Yit Tan Unknown Date (has links)
Adiponectin is an adipose-derived protein (adipocytokine) that is secreted by adipose tissue. It has insulin-sensitizing, anti-inflammatory and cardio-protective properties, and is thought to be protective against obesity-related diseases such as type 2 diabetes. Humans and cats are two species that commonly develop type 2 diabetes associated with insulin resistance, impaired beta cell function and spontaneous islet amyloid deposition. The domestic cat (Felis catus) has recently been proposed as an animal model for human type 2 diabetes. However, little is known about the physiology of adiponectin in cats. Therefore, we set out to investigate the association of adiponectin profiles with dietary carbohydrate intake, feeding, body weight, fat mass, and insulin sensitivity in healthy young adult cats (n=32; 2-4 years old; gender ratio 1:1; body condition 4-5/9). Cats were fed a moderate carbohydrate diet (37% ME) at maintenance energy requirements for four weeks. Cats were then assigned to either receive a low (19% ME) or high (52% ME) carbohydrate diet and fed at maintenance energy requirements for another four weeks, followed by ad-libitum feeding for eight weeks to facilitate weight gain. Adiponectin profiles including total circulating adiponectin and its distribution [low molecular weight (LMW) and high molecular weight (HMW) adiponectin], and proportion of adiponectin that is HMW (SA) were measured by ELISA and velocity sedimentation using sucrose gradients, followed by Western blotting, respectively. We demonstrated inter-animal variation in total adiponectin concentration at baseline (0.6 to 15.0 g/mL), with the adiponectin present in both LMW and HMW forms. Feeding with a high carbohydrate diet for four weeks at maintenance energy requirements resulted in increased total adiponectin concentration, which was associated with an increased concentration of LMW adiponectin. In contrast, feeding with a low carbohydrate diet for four weeks at maintenance energy requirements resulted in increased concentration of HMW adiponectin, decreased LMW adiponectin concentration, and increased SA, without a change in total adiponectin concentration. In cats fed the high carbohydrate diet, total adiponectin and HMW adiponectin concentrations become lower at six hours after feeding, as compared to the fasting concentrations. This phenomenon was not observed in cats fed a low carbohydrate diet, indicating a diet-dependent postprandial effect. There was no effect of gender on any of the adiponectin profiles in cats. Unlike other studies in humans and mice in which adiponectin concentrations decreased as fat mass increased, our data indicate that a moderate weight gain achieved by ad libitum feeding of a low carbohydrate diet for eight weeks correlated with increased adiponectin concentrations. Total adiponectin concentration (mirrored by HMW adiponectin) was positively correlated with body weight gain and fat mass gain (but not absolute fat mass) in our overweight cats. Furthermore, the fat mass-related increases in plasma adiponectin over eight weeks correlated with insulin sensitivity (higher adiponectin concentration corresponded to greater insulin sensitivity in overweight cats). These data hint at the possibility that in overweight animals, adiponectin is similar to other adipokines that rise concomitantly with increased of moderate fat mass gain and thus increases insulin sensitivity. Overall, the knowledge in this study therefore provides useful information to veterinarians and cat food manufacturers, and forms a foundation for future studies to extend our knowledge of adiponectin in cats. Data gathered in cats may also be applicable to humans and could therefore inform research using cats as an animal model of human obesity and type 2 diabetes.
|
36 |
Occupational Exposure and New-onset Asthma in a Population-based Study in Northern Europe (RHINE)Lillienberg, Linnea, Andersson, Eva, Janson, Christer, Dahlman-Hoglund, Anna, Forsberg, Bertil, Holm, Mathias, Gislason, Thorarinn, Joegi, Rain, Omenaas, Ernst, Schlunssen, Vivi, Sigsgaard, Torben, Svanes, Cecilie, Toren, Kjell January 2013 (has links)
In a large population-based study among adults in northern Europe the relation between occupational exposure and new-onset asthma was studied. The study comprised 13 284 subjects born between 1945 and 1973, who answered a questionnaire 19891992 and again 19992001. Asthma was defined as Asthma diagnosed by a physician with reported year of diagnose. Hazard ratios (HR), for new-onset adult asthma during 19802000, were calculated using a modified job-exposure matrix as well as high-risk occupations in Cox regression models. The analyses were made separately for men and women and were also stratified for atopy. During the observation period there were 429 subjects with new-onset asthma with an asthma incidence of 1.3 cases per 1000 person-years for men and 2.4 for women. A significant increase in new-onset asthma was seen for men exposed to plant-associated antigens (HR 3.6; 95% CI [confidence interval] 1.49.0), epoxy (HR 2.4; 95% CI 1.34.5), diisocyanates (HR 2.1; 95% CI 1.23.7) and accidental peak exposures to irritants (HR 2.4; 95% CI 1.34.7). Both men and women exposed to cleaning agents had an increased asthma risk. When stratifying for atopy an increased asthma risk were seen in non-atopic men exposed to acrylates (HR 3.3; 95% CI 1.47.5), epoxy compounds (HR 3.6; 95% CI 1.67.9), diisocyanates and accidental peak exposures to irritants (HR 3.0; 95% CI 1.27.2). Population attributable risk for occupational asthma was 14% for men and 7% for women. This population-based study showed that men exposed to epoxy, diisocyanates and acrylates had an increased risk of new-onset asthma. Non-atopics seemed to be at higher risk than atopics, except for exposure to high molecular weight agents. Increased asthma risks among cleaners, spray painters, plumbers, and hairdressers were confirmed.
|
37 |
Microdialysis Sampling of Macro Molecules : Fluid Characteristics, Extraction Efficiency and Enhanced PerformanceChu, Jiangtao January 2015 (has links)
In this thesis, fluid characteristics and sampling efficiency of high molecular weight cut-off microdialysis are presented, with the aim of improving the understanding of microdialysis sampling mechanisms and its performance regarding extraction efficiency of biological fluid and biomarkers. Microdialysis is a well-established clinical sampling tool for monitoring small biomarkers such as lactate and glucose. In recent years, interest has raised in using high molecular weight cut-off microdialysis to sample macro molecules such as neuropeptides, cytokines and proteins. However, with the increase of the membrane pore size, high molecular weight cut-off microdialysis exhibits drawbacks such like unstable catheter performance, imbalanced fluid recovery, low and unstable molecule extraction efficiency, etc. But still, the fluid characteristics of high molecular weight cut-off microdialysis is rarely studied, and the clinical or in vitro molecule sampling efficiency from recent studies vary from each other and are difficult to compare. Therefore, in this thesis three aspects of high molecular weight cut-off microdialysis have been explored. The first, the fluid characteristics of large pore microdialysis has been investigated, theoretically and experimentally. The results suggest that the experimental fluid recovery is in consistency with its theoretical formula. The second, the macromolecule transport behaviour has been visualized and semi-quantified, using an in vitro test system and fluorescence imaging. The third, two in vitro tests have been done to mimic in vivo cerebrospinal fluid sampling under pressurization, using native and differently surface modified catheters. As results, individual protein/peptide extraction efficiencies were achieved, using targeted mass spectrometry analysis. In summary, a theory system of the fluid characteristics of high molecular weight cut-off microdialysis has been built and testified; Macromolecular transport of microdialysis catheter has been visualized; In vivo biomolecules sampling has been simulated by well-defined in vitro studies; Individual biomolecular extraction efficiency has been shown; Different surface modifications of microdialysis catheter have been investigated. It was found that, improved sampling performance can be achieved, in terms of balanced fluid recovery and controlled protein extraction efficiency.
|
38 |
Belastungsuntersuchungen von arthroskopischen und offenen Knotentypen unter Verwendung von hochfestem, polyfilem Nahtmaterial / Mechanical testing of different knot types using high-performance suture materialSachs, Christian 16 December 2013 (has links)
No description available.
|
39 |
Stochastic representation and analysis of rough surface topography by random fields and integral geometry - Application to the UHMWPE cup involved in total hip arthroplastyAhmad, Ola 23 September 2013 (has links) (PDF)
Surface topography is, generally, composed of many length scales starting from its physical geometry, to its microscopic or atomic scales known by roughness. The spatial and geometrical evolution of the roughness topography of engineering surfaces avail comprehensive understanding, and interpretation of many physical and engineering problems such as friction, and wear mechanisms during the mechanical contact between adjoined surfaces. Obviously, the topography of rough surfaces is of random nature. It is composed of irregular hills/valleys being spatially correlated. The relation between their densities and their geometric properties are the fundamental topics that have been developed, in this research study, using the theory of random fields and the integral geometry.An appropriate random field model of a rough surface has been defined by the most significant parameters, whose changes influence the geometry of its excursion. The excursion sets were quantified by functions known as intrinsic volumes. These functions have many physical interpretations, in practice. It is possible by deriving their analytical formula to estimate the parameters of the random field model being applied on the surface, and for statistical analysis investigation of its excursion sets. These subjects have been essentially considered in this thesis. Firstly, the intrinsic volumes of the excursion sets of a class of mixture models defined by the linear combination of Gaussian and t random fields, then for the skew-t random fields are derived analytically. They have been compared and tested on surfaces generated by simulations. In the second stage, these random fields have been applied to real surfaces measured from the UHMWPE component, involved in application of total hip implant, before and after wear simulation process. The primary results showed that the skew-t random field is more adequate, and flexible for modelling the topographic roughness. Following these arguments, a statistical analysis approach, based on the skew-t random field, is then proposed. It aims at estimating, hierarchically, the significant levels including the real hills/valleys among the uncertain measurements. The evolution of the mean area of the hills/valleys and their levels enabled describing the functional behaviour of the UHMWPE surface over wear time, and indicating the predominant wear mechanisms.
|
40 |
Association of Adiponectin Profiles with Dietary Carbohydrate Intake, Feeding, Gender, Body Weight, Fat Mass, and Insulin Sensitivity in Healthy Young Cats (Felis catus)Heok Yit Tan Unknown Date (has links)
Adiponectin is an adipose-derived protein (adipocytokine) that is secreted by adipose tissue. It has insulin-sensitizing, anti-inflammatory and cardio-protective properties, and is thought to be protective against obesity-related diseases such as type 2 diabetes. Humans and cats are two species that commonly develop type 2 diabetes associated with insulin resistance, impaired beta cell function and spontaneous islet amyloid deposition. The domestic cat (Felis catus) has recently been proposed as an animal model for human type 2 diabetes. However, little is known about the physiology of adiponectin in cats. Therefore, we set out to investigate the association of adiponectin profiles with dietary carbohydrate intake, feeding, body weight, fat mass, and insulin sensitivity in healthy young adult cats (n=32; 2-4 years old; gender ratio 1:1; body condition 4-5/9). Cats were fed a moderate carbohydrate diet (37% ME) at maintenance energy requirements for four weeks. Cats were then assigned to either receive a low (19% ME) or high (52% ME) carbohydrate diet and fed at maintenance energy requirements for another four weeks, followed by ad-libitum feeding for eight weeks to facilitate weight gain. Adiponectin profiles including total circulating adiponectin and its distribution [low molecular weight (LMW) and high molecular weight (HMW) adiponectin], and proportion of adiponectin that is HMW (SA) were measured by ELISA and velocity sedimentation using sucrose gradients, followed by Western blotting, respectively. We demonstrated inter-animal variation in total adiponectin concentration at baseline (0.6 to 15.0 g/mL), with the adiponectin present in both LMW and HMW forms. Feeding with a high carbohydrate diet for four weeks at maintenance energy requirements resulted in increased total adiponectin concentration, which was associated with an increased concentration of LMW adiponectin. In contrast, feeding with a low carbohydrate diet for four weeks at maintenance energy requirements resulted in increased concentration of HMW adiponectin, decreased LMW adiponectin concentration, and increased SA, without a change in total adiponectin concentration. In cats fed the high carbohydrate diet, total adiponectin and HMW adiponectin concentrations become lower at six hours after feeding, as compared to the fasting concentrations. This phenomenon was not observed in cats fed a low carbohydrate diet, indicating a diet-dependent postprandial effect. There was no effect of gender on any of the adiponectin profiles in cats. Unlike other studies in humans and mice in which adiponectin concentrations decreased as fat mass increased, our data indicate that a moderate weight gain achieved by ad libitum feeding of a low carbohydrate diet for eight weeks correlated with increased adiponectin concentrations. Total adiponectin concentration (mirrored by HMW adiponectin) was positively correlated with body weight gain and fat mass gain (but not absolute fat mass) in our overweight cats. Furthermore, the fat mass-related increases in plasma adiponectin over eight weeks correlated with insulin sensitivity (higher adiponectin concentration corresponded to greater insulin sensitivity in overweight cats). These data hint at the possibility that in overweight animals, adiponectin is similar to other adipokines that rise concomitantly with increased of moderate fat mass gain and thus increases insulin sensitivity. Overall, the knowledge in this study therefore provides useful information to veterinarians and cat food manufacturers, and forms a foundation for future studies to extend our knowledge of adiponectin in cats. Data gathered in cats may also be applicable to humans and could therefore inform research using cats as an animal model of human obesity and type 2 diabetes.
|
Page generated in 0.0951 seconds