A gas-pressure cell, based on a leuco-sapphire single-crystal, serving as a pressure vessel and sample holder, is presented for real time in situ studies of solid-gas hydrogenation reactions. A stainless steel corpus, coated with neutron absorbing varnish, allows alignment for the single-crystal sample holder for minimizing contributions to the diffraction pattern. Openings in the corpus enable neutron scattering as well as contactless temperature surveillance and laser heating. The gas-pressure cell is validated via the deuteration of palladium powder, giving reliable neutron diffraction data at the high-intensity diffractometer D20 at the Institut Laue-Langevin (ILL), Grenoble, France. It was tested up to 15.0 MPa of hydrogen pressure at room temperature, 718 K at ambient pressure and 584 K at 9.5 MPa of hydrogen pressure.

No description available.

No description available.

Commercially important hydrogenation reactions make use of precious noble metal catalysts which are becoming increasingly scarce, and the search for capable alternative catalysts prevails. Transition metal carbides of group IV-VI metals show similar catalytic behavior to platinum and are $103/kg lower in price than the precious metal catalysts. Tungsten carbide, studied in this work, can form in different stoichiometries and phase compositions depending upon synthesis methods. Synthesis of high surface area tungsten carbide with control over its phase composition remains a challenge currently. In this work, the novel isothermal synthesis method of tungsten carbide (WC, W2C) in a CH4/H2 carburization atmosphere with synthesis temperature and presence or absence of a silica support in the catalyst precursor (WO3) as process variables was investigated. The amounts of CO and H2O formed during synthesis corresponded to the amount of oxygen in the WO3 precursor. The catalysts were further characterized by X-ray diffraction to determine phase composition and crystallite size, by scanning electron microscopy to determine morphology, and by CO chemisorption to determine metallic surface area. X-ray diffraction analysis indicated the carbide catalysts to contain W2C, WC, and metallic W phases. The use of a silica-supported precursor favored the formation of a nearly phase pure, high surface area W2C rich catalyst whereas high synthesis temperature and absence of silica precursor favored formation of a low surface area WC rich catalyst. Further, the catalysts were tested for steady state activity at a W/F (weight catalyst/toluene feed rate) of 0.20-0.30 h-1, addition of H2 to a total pressure of 21 bar absolute and 250 °C, and the effect of phase composition and surface area on the activity was studied. This work resulted in the successful synthesis of 4 tungsten carbide catalysts with varying phase compositions and surface areas and correlation of their compositions and surface areas with their corresponding toluene hydrogenation activities.

The two projects described in this dissertation demonstrate the wide utility of noble metal N-heterocyclic carbene (NHC) complexes. The first project details the design of iridium NHC amino acid complexes for asymmetric transfer hydrogenation (ATH) of prochiral ketones. Iridium(I) bis-NHC complexes were found to undergo oxidative addition with a variety of alpha-amino acids, generating chiral iridium(III) complexes of the form Ir(NHC)2(aa)(H)(X) (aa = amino acid, X = halide). The complexes were screened for ATH of aryl and alkyl ketones, and optimization studies found enantioselectivity in this system was highly sensitive to the reaction temperature, NHC ligand, and amino acid. Incorporation of secondary amino acids was essential to enantioselectivity. Aryl ketones were reduced in high conversion and enantioselectivity when employing the Ir(IMe)2(L-Pro)(H)(I) catalyst in isopropyl alcohol, in some cases giving over 90% ee of the alcohol products. Density functional theory calculations were conducted in order to gain insight into the active catalytic species, and the results suggest that the high enantioselectivity of this system primarily arises from steric effects. The second project details the design of rhodium and iridium NHC piano-stool complexes featuring derivatized tetramethylcyclopentadienyl ligands (Cp*R, R = alkyl or aryl substituent) for antimicrobial applications. Complexes of the form (Cp*R)M(NHC)Cl2 (M = Rh or Ir) were synthesized by transmetallation of the NHC ligand using silver(I) oxide in the presence of the desired noble metal Cp*R dimer. The complexes were screened for biological activity against various bacteria, yeast, and fungi. Many of these compounds were highly active against Mycobacterium smegmatis, displaying minimum inhibitory concentrations (MICs) as low at 0.25 microgram per mL. Analysis of structure-activity relationships found that incorporation of the NHC ligand greatly enhances the antimicrobial properties of rhodium and iridium piano-stool complexes, more so than previously investigated diamine, amino acid, or beta-diketonato ligands. Cytotoxicity studies on one of the rhodium NHC complexes showed this compound was nontoxic towards mammalian cells at low concentrations, which strengthens the potential of these types of compounds as viable drug candidates. / Doctor of Philosophy / This dissertation describes two practical applications of a series of complexes featuring the noble metals rhodium and iridium. In all of these complexes, the metal center is bonded to one or two groups known as N-heterocyclic carbenes (NHCs). The most common structural variant of NHCs are five-membered rings. The metal is usually bonded to a carbon atom on these rings, which is flanked by two nitrogen atoms. Noble metal complexes containing NHCs are widely investigated in contemporary chemical literature for a variety of reactions, primarily because noble metals form exceptionally strong bonds with NHCs, making these complexes very stable. N-Heterocyclic carbene compounds are also fairly easy to synthesize and structurally modify, which allows fine-tuning for specific applications. The first project in this dissertation employed iridium NHC amino acid complexes for the selective production of alcohols, meaning only one structure of the alcohol product is favorably generated. This is an important transformation in the chemical and pharmaceutical industries, which often require the synthesis of highly pure products. These complexes were found to be quite successful for this application on a range of model substrates, in some cases generating as high as 95% of one alcohol product over the other. Product selectivity was found to depend on the specific structure of the NHC compound. The second project investigated the antimicrobial properties of rhodium and iridium NHC complexes. In recent years, the growing threat of antimicrobial resistance against traditional pharmaceuticals has led to an interest in the development of metal-based drugs, which may allow for metal-specific mechanisms of drug action that are not possible for commonly employed antimicrobial agents. These NHC complexes were screened for biological activity against various bacteria, yeast, and fungi. Many of the complexes displayed high activity against Mycobacterium smegmatis, comparable to those displayed by other clinical drugs such as ampicillin or streptomycin. These results were highly encouraging, as Mycobacterium smegmatis often serves as a model to study other mycobacteria.

In many catalytic systems, the activity and selectivity of supported metal catalysts or extended metal surface catalysts would be affected by the metal surface structure, and this phenomenon is called structure sensitivity. Generally, structure sensitivity is led by the change of geometric and electronic properties of the metal on the surface. The variation of metal nuclearity and metal-support interactions are effective ways to change the geometric and electronic properties of the supported metal catalyst, leading to different types of the active sites exposing on the support that would take effect on catalyzing the reaction. In this work, a series of supported Ir catalysts (on MgAl2O4 and SiO2) with different particle sizes less than 3 nm were utilized for hydrogenolysis of n-butane and ethane to study the structure sensitivity as well as the potential reaction pathways. The results indicate that the activity of n-butane hydrogenolysis increases as Ir particle size increases in the small particle size range (0.7–1.4 nm) and then drops when the Ir particle size further increases and the Ir single atoms might be inactive for hydrogenolysis after the post-reaction analysis. The selectivity of n-butane hydrogenolysis is dominated by central and one terminal C–C bond cleavage on the n-butane molecules at low temperature range. The selectivity to central C–C bond cleavage is highly dependent on the size of Ir and increases with a decrease in particle size down to ~1.4 nm but remains constant with further decrease in size. The hydrogenolysis of ethane shows a similar trend in the small size range but the activity is much lower than n-butane, which supports the low level of series reaction pathway in the case of n-butane hydrogenolysis. In addition to Ir nuclearity, the effect of electronic properties was also studied on another series of Ir catalysts supported on ZnAl2O4, in which zinc replace the magnesium within the same spinel structure. The characterization results including HAADF-STEM and volumetric CO chemisorption show the difference of Ir nuclearity in the subnanometer regime and nanoparticles (~1.4 nm), while XPS and DRIFTS indicate the difference of electronic properties from metal-support interaction on the two Ir catalysts with the same nuclearity but reduced at different temperatures. Acetylene hydrogenation is structure sensitive on Ir/ZnAl2O4 catalysts and the activity and selectivity are mainly determined by Ir nuclearity instead of the difference in electronic properties. The Ir single atoms and subnanometer clusters are more selective to the target product of C2H4 but less active than large Ir nanoparticles as there might be more π-bonded adsorption than di-σ bonded adsorption for C2H2 on the Ir single atoms and subnanometer clusters. / Doctor of Philosophy / The supported metal catalyst is a kind of effective substance that could help increase the reaction rate when being properly utilized in the reaction. From the industry point of view, the best thing is to maximize the catalyst productivity and minimize the expense so that the economic benefit could be magnified. The catalyst effectiveness in a certain reaction might be different when the surface structure of the catalyst varies. Usually, only the fraction of the surface metals could take effect. As the particle size of the catalyst decreases, the fraction of the surface atoms that contain active sites drastically changes, leading to a different catalytic performance and probably lower cost with improved efficiency for metal utilization. Therefore, it is very significant for the researchers to study the reaction structure sensitivity on the same series of catalysts with different particle sizes. Also, by understanding the reaction mechanism and fundamentals of the catalytic system, it would be possible for the researchers to rationally design the catalysts aiming at higher efficiency and lower cost. In this work, the reaction of hydrogenolysis that cleaves the C–C bonds within the alkanes molecules was studied on the supported Ir catalysts (Ir/MgAl2O4 and Ir/SiO2) with different particle sizes ranging from mostly single atoms, subnanometer clusters to nanoparticles. For n-butane hydrogenolysis, it is found that the selectivity to the target product of ethane is weakly dependent on particle size when smaller than 1.4 nm but decreases as the size further increases. Meantime, the activity is highest on the catalyst with surface-average particle size of 1.4 nm. Therefore, Ir size of ~1.4 nm is optimum for activity and selectivity to ethane. The series of Ir/ZnAl2O4 catalysts was tested for structure sensitivity by another probe reaction, semi-hydrogenation of acetylene. The adsorbed acetylene molecules could be hydrogenated by adding two hydrogen to form the adsorbed ethylene before desorption or further hydrogenation to form ethane. Our results show the Ir single atoms and subnanometer clusters are more selective to the target product of ethylene but less active than the large nanoparticles. With the understanding of structure sensitivity, researchers are able to rationally design the catalysts based on their necessity for certain reactions.

Ethyl iodide and ethyl chloride have been used as reactants to produce ethyl fragments on the stoichiometric α-Cr₂O₃ (1012) surface by means of thermal dissociation. Ethyl iodide is dissociated giving iodine adatoms and ethyl fragments bound to surface Cr cation sites, while ethyl chloride is dissociated giving chlorine adatoms and ethyl fragments. No oxygenated products are observed in thermal desorption, suggesting the 3-coordinate lattice oxygen on the stoichiometric α-Cr₂O₃ (1012) surface is very stable, and no nucleophilic attack occurs at the carbon atoms on surface ethyl fragments. For both reactants, the only reaction products observed are ethylene gas (CH₂=CH₂), ethane gas (CH₃-CH₃), hydrogen gas (H₂) and halogen adatoms (Cl_ads or I_ads). In thermal desorption experiments, all the gas phase products from ethyl chloride are produced in a reaction-limited, high temperature desorption feature attributed to a rate limiting β-hydride elimination from surface ethyl fragments. Similar product desorption features are observed for the reaction of ethyl iodide. However, the reaction of ethyl iodide also produces ethylene and ethane via a low temperature, desorption-limited reaction channel. It is postulated that I adatoms produced in the reaction of ethyl iodide thermal desorption might somehow promote a low temperature route to products that Cl adatoms do not. / Master of Science

This dissertation describes the design and synthesis of a series of half-sandwich amino acid complexes of the form), (aa = α-amino carboxylate), and their utility as asymmetric transfer hydrogenation catalysts of ketones. Variation of the metal center, the n-ring, and the aa was used to tune these systems for specific sets of ketones. Upon reaction with homochiral]s, the ligand environment in all of these complexes is pseudotetrahedral, leading to stereogenic metal ions (SM, RM). The addition of another stereogenic center from the amino acid ligand (the carbon, RC or SC;glycine) gives rise to two pairs of diastereomeric complexes. / Ph. D.

Tesis por compendio / Las especies de metal con diferentes tamaños (átomos individuales, nanocristales y nanopartículas) muestran un comportamiento catalítico diferente para diversas reacciones catalíticas heterogéneas. Se ha demostrado en la bibliografía que muchos factores que incluyen el tamaño de partícula, la forma, la composición química, la interacción metal-soporte, la interacción metal-reactivo / disolvente, pueden tener influencias significativas sobre las propiedades catalíticas de los catalizadores metálicos. Los desarrollos recientes de metodologías de síntesis bien controladas y herramientas de caracterización avanzada permiten correlacionar las relaciones a nivel molecular. En esta tesis, he llevado a cabo estudios sobre catalizadores metálicos desde átomos individuales hasta nanoclusters y nanopartículas. Al desarrollar nuevas metodologías de síntesis, el tamaño de las especies metálicas puede modularse y usarse como catalizadores modelo para estudiar el efecto del tamaño sobre el comportamiento catalítico de los catalizadores metálicos para la oxidación del CO, la hidrogenación selectiva, la oxidación selectiva y la fotocatálisis. Se ha encontrado que, los átomos metálicos dispersados por separado y los grupos subnanométricos de metal pueden aglomerarse en nanoclusters o nanopartículas más grandes en condiciones de reacción. Para mejorar la estabilidad de los catalizadores subnanométricos de metal, he desarrollado una nueva estrategia para la generación de átomos individuales y clusters en zeolitas. Esas especies subnanométricas de metales son estables en tratamientos de oxidación-reducción a 550 oC. Siguiendo esta nueva metodología de síntesis, este nuevo tipo de materiales puede servir como catalizador modelo para estudiar la evolución de especies subnanométricas de metales en condiciones de reacción. La transformación estructural de las especies subnanométricas de Pt ha sido estudiada mediante microscopía electrónica de transmisión in situ. Se ha demostrado que el tamaño de las especies de Pt está fuertemente relacionado con las condiciones de reacción, que proporcionan importantes conocimientos para comprender el comportamiento de los catalizadores de metales subnanométricos en condiciones de reacción. En la otra línea de investigación para catalizadores de metales no nobles, he desarrollado varias estrategias generales para obtener catalizadores de metales no nobles, ya sea soportados sobre óxidos metálicos o protegidos por capas delgadas de carbono. Estos materiales muestran un rendimiento excelente para varias reacciones importantes, como la hidrogenación quimioselectiva de nitroarenos, incluso cuando se comparan con los catalizadores de metales nobles convencionales. En algunos casos, los catalizadores de metales no nobles pueden incluso alcanzar selectividades para productos inviables que no ha sido posible conseguir en catalizadores de metales nobles convencionales, que es causado por la diferente ruta de reacción en catalizadores de metales no nobles. Sin embargo, la espectroscopía fotoelectrónica de rayos X a presión ambiente ha revelado que la irradiación de la luz puede modular la selectividad a los alcoholes y los hidrocarburos C2 +, lo que abre una nueva posibilidad para ajustar el comportamiento catalítico de los catalizadores metálicos. Con base en los trabajos anteriores de diferentes aspectos relacionados con catalizadores metálicos heterogéneos, las perspectivas sobre las direcciones futuras hacia una mejor comprensión del comportamiento catalítico de diferentes entidades metálicas (átomos individuales, nanoagrupamientos y nanopartículas) de una manera unificadora también se han dado en esta tesis. / Les espècies metàl·liques de diferents dimensions (àtoms individuals, nanoclusters i nanopartícules) mostren diferents comportaments catalítics per a diverses reaccions catalítiques heterogènies. S'ha demostrat a la literatura que, molts factors que inclouen la mida de la partícula, la forma, la composició química, la interacció amb el suport metàl·lic, la reacció metàl·lica i la interacció amb dissolvents poden tenir influències significatives sobre les propietats catalítiques dels catalitzadors metàl·lics. Els desenvolupaments recents de metodologies de síntesi ben controlades i eines de caracterització avançada permeten relacionar les relacions a nivell molecular. En aquesta tesi, he realitzat estudis sobre catalitzadors metàl·lics d'àtoms únics a nanoclústers i nanopartícules. Mitjançant el desenvolupament de noves metodologies de síntesi, la mida de les espècies metàl·liques es pot modular i utilitzar com a catalitzadors model per estudiar l'efecte de mida sobre el comportament catalític dels catalitzadors metàl·lics per a l'oxidació de CO, hidrogenació selectiva, oxidació selectiva i fotocatàlisi. S'ha trobat que, els àtoms metàl·lics dispersos individualment i els clústers metàl·lics subnanomètrics poden aglomerar-se en nanoclústeres o nanopartícules més grans en condicions de reacció. Per millorar l'estabilitat dels catalitzadors subnanomètrics de metall, he desenvolupat una nova estratègia per a la generació d'àtoms i racimos en zeolites. Aquestes espècies metàl·liques subnanométricas són estables en tractaments de reducció d'oxidació a 550 oC. Després d'aquesta nova metodologia de síntesi, aquest nou tipus de materials poden servir com a model de catalitzador per estudiar l'evolució de les espècies metàl·liques subnanométricas en condicions de reacció. La transformació estructural de l'espècie Pn subnanométrica ha estat estudiada per microscòpia electrònica de transmissió in situ. S'ha demostrat que la mida de les espècies de Pt està fortament relacionada amb les condicions de reacció, que proporcionen idees importants per comprendre el comportament dels catalitzadors de subnanometria en condicions de reacció. En l'altra línia de recerca dels catalitzadors de metalls no nobles, he desenvolupat diverses estratègies generals per obtenir catalizadors de metalls no nobles recolzats en òxids metàl·lics o protegits per capes de carboni primes. Aquests materials presenten un excel·lent rendiment per a diverses reaccions importants, com la hidrogenació quimioelectiva de nitroarenes, fins i tot quan es comparen amb els catalitzadors convencionals de metall noble. En alguns casos, els catalitzadors de metalls no nobles poden fins i tot aconseguir selectivitats a productes no factibles que no s'han pogut assolir en catalitzadors de metall noble convencionals, que es deuen a la via de reacció diferent en catalitzadors de metalls no nobles. No obstant això, s'ha observat una espectroscòpia de fotoelèctria de raigs X amb pressió d'atmosfera que la irradiació lleugera pot modular la selectivitat als alcohols i hidrocarburs C2 +, la qual cosa obre una nova possibilitat per sintonitzar el comportament catalític dels catalitzadors metàl·lics. A partir d'aquests treballs de diferents aspectes relacionats amb els catalitzadors metàl·lics heterogenis, també s'ha donat en aquesta tesi perspectives sobre les futures orientacions cap a una millor comprensió del comportament catalític de diferents entitats metàl·liques (àtoms individuals, nanoclústers i nanopartícules). / Metal species with different size (single atoms, nanoclusters and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that, many factors including the particle size, shape, chemical composition, metal-support interaction, metal-reactant/solvent interaction, can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow to correlate the relationships at molecular level. In this thesis, I have carried out studies on metal catalysts from single atoms to nanoclusters and nanoparticles. By developing new synthesis methodologies, the size of metal species can be modulated and used as model catalysts to study the size effect on the catalytic behavior of metal catalysts for CO oxidation, selective hydrogenation, selective oxidation and photocatalysis. It has been found that, singly dispersed metal atoms and subnanometric metal clusters may agglomerate into larger nanoclusters or nanoparticles under reaction conditions. To improve the stability of subnanometric metal catalysts, I have developed a new strategy for the generation of single atoms and clusters in zeolites. Those subnanometric metal species are stable in oxidation-reduction treatments at 550 oC. Following this new synthesis methodology, this new type of materials can serve as model catalyst to study the evolution of subnanometric metal species under reaction conditions. The structural transformation of subnanometric Pt species has been studied by in situ transmission electron microscopy. It has been shown that the size of Pt species is strongly related with the reaction conditions, which provide important insights for understanding the behavior of subnanometric metal catalysts under reaction conditions. In the other research line for non-noble metal catalysts, I have developed several general strategies to obtain non-noble metal catalysts either supported on metal oxides or protected by thin carbon layers. These materials show excellent performance for several important reactions, such as chemoselective hydrogenation of nitroarenes, even when compared with conventional noble metal catalysts. In some cases, non-noble metal catalysts can even achieve selectivities to unfeasible products which has not been possible to achieve on conventional noble metal catalysts, which is caused by the different reaction pathway on non-noble metal catalysts. Nevertheless, it has been revealed by ambient-pressure X-ray photoelectron spectroscopy that light irradiation can modulate the selectivity to alcohols and C2+ hydrocarbons, which opens a new possibility for tuning the catalytic behavior of metal catalysts. Based on the above works from different aspects related with heterogeneous metal catalysts, perspectives on the future directions towards better understanding on the catalytic behavior of different metal entities (single atoms, nanoclusters and nanoparticles) in a unifying manner have also been given in this thesis. / Liu, L. (2018). Heterogeneous Metal Catalysts: From Single Atoms to Nanoclusters and Nanoparticles [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/113169 / Compendio

L’utilisation des métaux nobles en catalyse hétérogène est limitée par la rareté de ces métaux, leur coût et les difficultés d’approvisionnement, le marché mondial étant régi par deux producteurs. Le but de ce travail a consisté à étudier l’association du platine et du cobalt afin de substituer en partie Pt par Co tout en préservant les propriétés catalytiques du métal noble en hydrogénation. Différentes synthèses de catalyseurs bimétalliques 1%Pt-5%Co supportés (coimprégnation, voie redox et voie colloïdale) ont été réalisées et les performances de ces catalyseurs comparées à celles des catalyseurs monométalliques et des mélanges mécaniques (Pt + Co) pour deux réactions d’hydrogénation d’intérêt industriel : l’hydrogénation de l’acétonitrile et celle du furfural. Les caractérisations par des techniques physicochimiques (MET, XPS, …) ou par réactions modèles (déshydrogénation du cyclohexane, hydrogénolyse du méthylcyclopentane) ont permis d’obtenir les résultats suivants : - la présence de Pt augmente la réductibilité du Co pour les catalyseurs coimprégnés ou pour les mélanges mécaniques, ce qui permet d’améliorer les performances catalytiques en hydrogénation du furfural ou de l’acétonitrile ;- la préparation par voie colloïdale oriente vers la formation de particules PtCo de type alliage de composition homogène, peu actives pour les réactions étudiées ;- la synthèse par voie redox permet de déposer précisément le platine au contact du cobalt créant un effet synergétique bénéfique. Il est ainsi possible d’obtenir la même activité que le platine seul en hydrogénation de l’acétonitrile mais avec un catalyseur PtCo présentant une quantité de Pt cinq fois moins importante. / The use of noble metals in heterogeneous catalysis is limited by the scarcity of these metals, their cost and the supply difficulties due to the monopole of only two countries on the world market. The aim of this work consisted to study the association of platinum and cobalt in order to substitute partly Pt with Co while preserving the catalytic performances of the noble metal in hydrogenation. Various syntheses of 1%Pt- 5%Co supported bimetallic catalysts have been achieved and their performances have been compared with those of monometallic catalysts as well as (Pt + Co) mechanical mixtures for two hydrogenation’s reactions of industrial interest: the hydrogenation of acetonitrile and that of furfural. The physicochemical characterizations carried out (TEM, XPS …) and the model reactions (dehydrogenation of cyclohexane, hydrogenolysis of methylcyclopentane) studied have pointed out several results: - the presence of Pt increases the reducibility of Co for co-impregnated catalysts and mechanical mixtures leading to an enhancement of the catalytic performances in hydrogenation of acetonitrile or furfural; - the colloidal preparation favors the formation of PtCo alloy particles with a homogeneous composition, which are not very active for the reactions studied; - the redox route synthesis can accurately deposit Pt in contact with Co creating an improvement of the catalytic performances by a synergistic effect. Thus, in the hydrogenation of acetonitrile, the same activity was obtained by using a Pt-Co catalyst containing five times less noble metal’s content than the 1% Pt catalysts.