Made available in DSpace on 2018-06-27T18:56:13Z (GMT). No. of bitstreams: 3 Rochele Cristine Aymay Bevilaqua.pdf: 4584354 bytes, checksum: 395258de907af3f78f22cdd57483ea53 (MD5) Rochele Cristine Aymay Bevilaqua.pdf.txt: 183116 bytes, checksum: 85dded0e1a86682707a6ccf16e494abd (MD5) Rochele Cristine Aymay Bevilaqua.pdf.jpg: 3219 bytes, checksum: b175371ca0df47f8e821438052396b10 (MD5) Previous issue date: 2010-08-27 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / In this work, we study nanostructures through first principles calculations based on the Density Functional Theory to use as gas sensors. At first, the proposal is based on the study of carbon nanotubes filled with iron oxides, particularly hematite and magnetite, for interaction with O2, N2 and CO2. Based on the analysis of electronic properties of semiconductors tubes with different diameters SWNT (8,0), (10,0) e (13,0) is verified that gases cause changes in al cases, making them as potential candidates to detect gases on the environment. In addition to these carbon-based nanostructures to serve as nanosensores, a second proposal was raised: the use of biomolecules as gas sensor. We chose the chlorophyll a and pheophytin a (a derivative without a magnesium atom in its structure) as an economically favorable alternative due to its low cost and easy to obtain. In fact, these pigments proved to be good sensor devices because the modest binding energy (-0.20 eV to -0.13 eV chlorophyll a to pheophytin a) that indicate a physical interaction with the gases O2, N2 and CO2. So it s possible to say that we can use both of systems carbon nanotubos filled iron oxides and chlorophyll a and its derivative as filters or gas sensors since the removal of gases from these nanostructures can occur easily making them reusable. / Nesta dissertação, estudaram-se nanoestruturas para sensoriamento de gases por meio de cálculos de primeiros princípios baseados na Teoria do Funcional da Densidade. Primeiramente, a proposta se baseia no estudo de nanotubos de carbono preenchidos com óxidos de ferro, em particular a hematita e a magnetita, para interação com O2, N2 e CO2. Em todos os sistemas estudados utilizaram-se tubos semicondutores de diferentes diâmetros. Através da análise de propriedades eletrônicas, verificou-se que os gases ocasionam alterações nos nanotubos de carbono, tornado-os potenciais candidatos para detecção de gases no meio ambiente. Além dessas nanoestruturas baseadas em carbono para servir como nanosensores, uma segunda proposta foi levantada: a utilização de biomoléculas. Optou-se, então, pelo uso de porfirinas, em especial pela clorofila a e a feofitina a, como uma alternativa economicamente favorável devido ao seu baixo custo e fácil obtenção. De fato, esses pigmentos apresentaram-se como bons dispositivos sensores em razão das energias de ligação (-0,20 eV para a clorofila a e -0,13 eV para a feofitina a) que indicam uma interação física com os gases O2, N2 e CO2. Portanto, os resultados obtidos sugerem que essas nanoestruturas nanotubos de carbono preenchidos com óxidos de ferro e a clorofila a e seu derivado podem ser utilizadas como nanosensores efetivos de gases uma vez que a detecção dessas moléculas pode ser facilmente efetuada sem prejudicar a reutilização desses sistemas.

Made available in DSpace on 2014-10-09T12:42:28Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:01:49Z (GMT). No. of bitstreams: 0 / Neste trabalho foram estudadas as nanopartículas magnéticas (NPs) de interesse em biomedicina de Fe3O4 e de Fe3O4 dopadas com Gd 5% pela técnica de Espectroscopia de correlação angular gama-gama perturbada (CAP). As amostras de Fe3O4 foram sintetizadas pelos métodos de co-precipitação e decomposição térmica e as nanopartículas de Fe3O4 dopadas com Gd 5% foram sintetizadas pelo método da coprecipitação. As amostras de nanoparticulas foram caracterizadas quanto a sua estrutura pela difração de raios X (DRX) e quanto ao seu tamanho pela técnica de microscopia eletrônica de transmissão (TEM). Os resultados mostram que as nanoparticulas de ferrita mostram estrutura pertencente ao grupo espacial Fd3m e que seu tamanho é de 10 nm quando sintetizada por decomposição térmica e entre 7 e 15 nm quando sintetizada por co-precipitação. As nanopartículas de Fe3O4 sintetizadas pelo método de decomposição térmica apresentaram maior monodispersão do que as nanopartículas sintetizadas pelo método de co-precipitação, ou seja, o tamanho de grão estava mais homogêneo. A técnica CAP mostrou que a variação de tamanho das nanopartículas infuencia no comportamento magnético das mesmas e o dopante Gd atrapalha a introdução da sonda radioativa por competir pelos sítios de Fe. / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Au cours de cette étude, nous avons montré que dans les oxydes de fer type perovskite, les ions sulfates (SO42-) pouvaient être utilisés à escient pour apporter de l'anisotropie cristalline et électronique ou bien au contraire pour casser les mises en ordre à longue distance et provoquer l'isotropie du matériau. Ainsi, ce travail a permis d'isoler les composés bidimensionnels : Sr4Fe2.5-x□xO7.25-(3x/2)(SO4)0.5 (avec x=0, 0.25 et 0.5). Ils peuvent être décrits comme une intercroissance SrO/SrFeO2,5/SrFe0,5-x□xO1,25-(3x/2)(SO4)0,5/SrFeO2,5 et cristallisent dans une maille moyenne quadratique I4/mmm (a=ap et c≈29 Å). Les tétraèdres de sulfates non-pontés se présentent de façon transversale par rapport à c ⃗ pour x=0,5 et longitudinale pour x=0 et 0,25 parce que pontés aux pyramides de fer de la couche partagée. Les atomes de fer des couches non-mixtes SrFeO2,5 se situent eux en coordinence pyramidale pour x=0 et pyramidale et octaédrique pour x=0.5 et x=0.25 afin de respecter la trivalence du fer. Quel que soit x, les composés sont antiferromagnétiques de type G (les spins se situant dans le plan (a,b)). Cependant, pour x=0,5, deux configurations magnétiques sont observées, tandis que les composés x=0 et x=0.25 n'en montrent qu'une seule. Dans le composé Sr4Fe2.5□xO7.25(SO4)0.25(CO3)0.25, l'influence des carbonates (CO32-) se ressent directement sur le paramètre d'empilement, qui est plus petit. Cela n'entraîne cependant aucun changement sensible dans les propriétés physiques. Les composés sont des semi-conducteurs présentant de fortes valeurs de résistivité électronique (de l'ordre de 106Ω.cm) et ne sont pas conducteurs ioniques.La phase ordonnée "15R" SrFe0.6Cr0.4O2.8 se désordonne lorsque l'on substitue 10% du fer par des sulfates (SrFe0.5Cr0.4O2.1(SO4)0.1) et adopte une structure pseudo-cubique. Ses propriétés physiques sont alors bouleversées puisque l'on passe d'un comportement ferromagnétique à antiferromagnétique (TN=800K). Ce composé très lacunaire en oxygène montre des défauts structuraux plus ou moins étendus et un comportement de type semi-conducteur. Aucun phénomène de conduction ionique n'est observé. / In this study, we have shown that in perovskite-type iron oxides, sulfate ions (SO42-) can be used to bring structural and electronic anisotropy, or on the contrary to break long distance ordering and cause the isotropy of the material.Thus, this work made it possible to isolate the two-dimensional compounds: Sr4Fe2.5-x□x07.25-(3x/2)(SO4)0.5 (with x = 0.25 and 0.5). They can be described as an intergrowth SrO/SrFeO2,5/SrFe0,5-x□xO1,25-(3x/2)(SO4)0.5/SrFeO2,5 and crystallize in a quadratic mean cell I4/mmm (a=ap et c≈29 Å). The unbridged sulfates tetrahedra are oriented transversely with respect to c ⃗ for x=0.5 and longitudinal for x=0 and 0.25 because bridged to the iron pyramids of the shared layer. The iron atoms of the non-mixed layers SrFeO2,5 are in pyramidal coordination for x=0 and pyramidal and octahedral coordination for x=0.5 and x=0.25, in order to respect the trivalence of iron. However, for x=0.5, two magnetic configurations are observed whereas the compounds x=0 and x=0.25 show only one. In the compound Sr4Fe2.5□xO7.25(SO4)0.25(CO3)0.25, the influence of the carbonates (CO32-) is directly felt on the stacking parameter, which is smaller. The compounds are semiconductors with high electronic resistivity values (of the order of 106Ω.cm) and are not ionic conductors.The ordered phase "15R" SrFe0.6Cr0.4O2.8 becomes disordered when 10% of the iron is substituted with sulfates (SrFe0.5Cr0.4O2.1(SO4)0.1) and adopts a pseudo-cubic structure. Its physical properties are then modified because we switch from a ferromagnetic to an antiferromagnetic behavior (TN=800K). This oxygen-deficient compound shows more or less large structural defects and a semiconductor behavior. No ionic conduction phenomenon is observed.

Case hardened Uddeholm Orvar® Superior (Orvar) has the potential to replace currently used materials in shafts inside transmissions, which would lower the overall weight and thus result in lower fuel consumption while maintaining the necessary mechanical properties. However, previous studies have failed to reliably carburize the steel during the case hardening process. The case contains tempered martensite, which has high wear resistance, hardness, and good fatigue properties, and will be affected by the absence of the additional carbon. The presence of passive oxide layers such as chromia and silica is believed to inhibit the carburization, this by their impact of the adsorption and diffusion. One suggested solution is a preoxidation step before the carburization, to promote the formation of iron oxides which are preferential for carburization due to higher diffusion. To evaluate the impact of preoxidation different times, temperatures, and cooling methods were used and analyzed by LOM, XRD, SEM, and hardness measurements. The results indicate that reliable carburization can be obtained by preoxidation performed at 600 °C for 24 hours followed by immediate case hardening. / Sätthärdat Uddeholm Orvar® Superior (Orvar) har potential att ersätta nuvarande material i drivaxlari växellådor, detta skulle minska vikten och därmed sänka bränslekonsumtionen medan de nödvändiga mekaniska egenskaperna behålls. Tidigare studier har emellertid misslyckats med att tillförlitligt uppkola stålytan under sätthärdningen. Ytan består utav tempererad martensit som har hög slitstyrka, hårdhet, och bra utmattningsegenskaper, och påverkas utav avsaknaden av tillfört kol. Närvaron av passiva oxidskikt som kiseldioxid och kromoxid tros hindra uppkolningen, detta på grund utav deras påverkan på adsorption och diffusion. En föreslagen lösning är ett föroxideringssteg innan sätthärdningen, för att gynna bildandet utav järnoxider vilka är fördelaktiga för uppkolningen på grund utav högre diffusion. För att utvärdera påverkan av föroxideringen användes olika tider, temperaturer, och kylningsmetoder som blev analyserade utav LOM, XRD, SEM, och hårdhetsmätningar. Resultaten indikerar att tillförlitlig uppkolning kan uppnås med föroxideringutförd vid 600 °C i 24 timmar följt utav omedelbar sätthärdning.

No description available.

[pt] O presente trabalho tem por objetivo analisar a degradação do fármaco Clonazepam (CZP), um dos remédios controlados mais vendidos no mundo e um possível contaminante emergente das águas residuais e de superfície. Foi realizada a degradação do composto a partir da fotólise UVC do peróxido de hidrogênio, das reações de Fenton fotoassistida (Foto-Fenton) por lâmpadas UVA, UVC, e por radiação solar, assim como pelo Sistema H2O2/Óxidos de Ferro, para efeito de comparação. Todas as análises foram conduzidas por cromatografia líquida de alta eficiência (CLAE) com detector UV. Os resultados alcançaram conversões acima de 85 por cento em boa parte dos experimentos e indicaram a cinética, em sua maioria, com ordem aparente próxima a 2 e k igual 0,95 mg. L-1. min-1 no Foto-Fenton UVC e k igual 0,02 mg.L-1.min-1 no Sistema H2O2/Óxidos de Ferro. Além disso, foi feita a análise de toxicidade utilizando sementes de alface para o H2O2/Óxidos de Fe, a fotólise UVC e para o Foto-Fenton com lâmpada UVC, com valores de inibição de crescimento de até 44 por cento. / [en] The present work aims at analyzing the degradation of the drug Clonazepam (CZP), one of the best-selling controlled drugs in the world and a possible emerging contaminant of surface and wastewater. Compound degradation was performed by UVC photolysis of hydrogen peroxide, photo-assisted Fenton reactions (Photo-Fenton) by UVA, UVC lamps, and solar radiation, as well as by the H2O2/Iron Oxides System for comparison purposes. All analyses were conducted by high performance liquid chromatography (HPLC) with UV detector. The results reached conversions above 85 percent in most of the experiments and indicated the kinetics, mostly, with apparent order close to 2 and k equal 0.95 mg. L-1. min-1 in Photo-Fenton UVC and k equal 0.02 mg.L-1.min-1 in H2O2/Iron Oxides. In addition, toxicity analysis was carried out using lettuce seeds for H2O2/Iron Oxides, UVC photolysis and UVC lamp Photo-Fenton, with growth inhibition values of up to 44 percent.

The presence of deposits on the secondary side of pressurized water reactor (PWR) steam generator systems is one of the main contributors to the high maintenance costs of these generators. Formation and transport of corrosion products formed due to the presence of impurities, metals and metallic oxides in the secondary side of the steam generator units result in formation of deposits. This research deals with understanding the deposit formation and characterization of deposits by studying the samples collected from different units in secondary side system at Comanche Peak Steam Electric Station (CPSES). Fourier transform infrared spectrophotometry (FTIR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) have been used for studying the phases, morphologies and compositions of the iron oxides formed at Unit 1 and Unit 2 of secondary side of steamgenerator systems. Hematite and magnetite were found to be the dominant phases of iron oxides present in the units. Fe, Cr, O, Ni, Si, Cl and Cu were found in samples collected from both the units. A qualitative method was developed to differentiate iron oxides using laser induced breakdown spectroscopy (LIBS) based on temporal response of iron oxides to a high power laser beam. A quantitative FTIR technique was developed to identify and quantify iron oxides present in the different components of the secondary side of the steam generator of CPSES. Amines are used in water treatment to control corrosion and fouling in pressurized water reactors. CPSES presently uses an amine combination of dimethylamine (DMA), hydrazine and morpholine to control the water chemistry. Along with the abovementioned amines, this study also focuses on corrosion inhibition mechanismsof a new amine DBU (1, 8-diazabicyclo [5.4.0] undec-7-ene). Electrochemical impedance spectroscopy and polarization curves were used to study the interaction mechanism between DBU solution and inconel alloys 600 and 690 at steamgenerator operating temperatures and pressures. Of all the amines used in this study (DMA, DBU, ETA, and morpholine), DMA was more effective at keeping the passive film formed on the alloy 600 surface from failing at both ambient and high temperatures. Morpholine was found result in higher corrosion resistance compared to the other amines in case of alloy 690.

O sistema de plantio direto (SPD) é extensivamente utilizado no Brasil por tratar-se de prática conservacionista, capaz de melhorar a qualidade do solo e diminuir os custos da produção em relação ao plantio convencional. Neste sistema as condições edafoclimáticas distintas e a adoção de diferentes culturas na entressafra sugerem diferenças na distribuição e na qualidade da matéria orgânica de solos (MOS), devido ao tempo de resiliência da palha em cobertura. A interação entre a MOS e os pesticidas já foi bastante estudada, mas apenas parcialmente esclarecida uma vez que a maioria dos estudos considera a MOS como um compartimento homogêneo, ignorando o papel de seus diferentes componentes moleculares. Assim sendo, o objetivo principal deste trabalho é avaliar o efeito da composição, distribuição e interação com a fase mineral da MOS na sorção de herbicidas aplicados às culturas de soja e milho, sob sistema plantio direto em diferentes condições edafoclimáticas: tropical (Região Centro-Oeste) e subtropical (Região Sul). Os herbicidas alaclor, bentazon e imazetapir foram selecionados devido às suas importâncias junto a essas culturas e suas propriedades físico-químicas distintas. Para tal, soram amostrados 12 Latossolos, na camada de 0 a 5 cm excluindo a palha de superfície, sendo seis representativos do Estado do Paraná (clima subtropical) e seis representativos do Estado do Mato Grosso do Sul (clima tropical). A determinação dos atributos físico e químicos, formas de ferro e alumínio, estudo da qualidade da MOS por espectroscopia de Ressonância Nuclear Magnética do 13C e fracionamento físico dos solos foram os métodos utilizados. Foi observado maior acúmulo de carbono orgânico (C.O) nos solos subtropicais devido ao maior teor de óxidos de alumínio de baixa cristalinindade, além da maior precipitação. Para os solos de ambas as regiões, a estabilização da MOS ocorre através da formação de complexos nos agregados tamanho argila ( ~ 50% do teor de C.O). Em relação às interações com a fase mineral, observou-se que os óxidos de alumínio estão relacionados à proteção física da MOS enquanto que os óxidos de ferro parecem participar das reações de decomposição e humificação através da formação de complexos com grupos carboxílicos. Para o alaclor, a presença de formas de alumínio de baixa cristalinidade diminuiu a sua sorção a MOS, entretanto a sorção deste herbicida não foi correlacionada a nenhum grupo funcional. Para o bentazon, foi observada correlação positiva entre a sorção e materiais orgânicos mais decompostos e também, com o alumínio complexado a MOS. Para o imazetapir, houve correlações positivas com as formas de ferro e alumínio e o grupo funcional carboxil. Para os três herbicidas a maior sorção foi observada nos agregados de tamanho silte (53 a 2 ?m) e, de maneira geral, a sorção nos solos tropicais foi maior que nos subtropicais. O efeito da exposição de sítios de carga após o fracionamento físico dos solos foi evidente para o imazetapir incrementando sua sorção em comparação a sorção no solo inteiro o que evidencia a maior quantidade de sítios bloqueados nos solos tropicais. / No-tillage System (NT) is widely used in Brazil due to improve soil quality and reduce production costs compared to conventional tillage. Different climatic conditions and the adoption of different cultures in the offseason suggest differences in the distribution and quality of soil organic matter (SOM) due to the resilience time of straw in coverage in NT. Interactions between SOM and pesticides has been widely studied, but only partially elucidated. In most of studies, the MOS as a homogeneous compartment and there is not the knowledge about the role of its various molecular components. Therefore, the aim of this work is to evaluate the effect of the composition, distribution and interaction with the mineral phase of SOM on sorption of herbicides applied to soybean and corn under no-tillage in tropical (Central-west) and subtropical (South Region) soils. Alachlor, bentazon and imazethapyr herbicides were selected because of its large use in these cultures and different physicochemical properties. For this, it was sampled 12 soils at 0-5 cm layer excluding the straw surface, six representing the Paraná State (subtropical) and six representative of Mato Grosso de Sul State (tropical). Physical and chemical attributes, iron and aluminum forms, study of quality of SOM by Nuclear Magnetic Resonance Spectroscopy of 13C and soil physical fractionation methods were used for this purpose. Greater accumulation of organic carbon (OC) was observed in subtropical soils due to higher low crystalline aluminum oxides contents, in addition to lower temperatures and higher moisture in this region. For soils of both regions, the SOM stabilization occurs through the formation of complexes in the clay fraction (~ 50 % of the OC content). Regarding interactions with the mineral phase, it was observed that aluminum oxides are related to physical protection of SOM while iron oxides appear to participate in the decomposition and humification reactions by forming complexes with carboxylic groups. For alachlor, low crystallinity aluminum forms decreased its MOS sorption but sorption of this herbicide was not correlated with any functional group. For bentazon, positive correlation was observed between sorption and more decomposed organic material and with the complexed aluminum in MOS. For imazethapyr, there were positive correlations with iron and aluminum forms and carboxyl functional group. For the three herbicides better sorption was observed in the silt size fractions (53-2 ?m) and in general, sorption in tropical was higher than in subtropical soils. The effect of charge sites exposure after soil physical fractionation was evident for imazethapyr increasing its sorption compared to the whole soil which shows the greatest amount of blocked sites in tropical soils.

Ziel der Untersuchungen war es, neue Strategien zu entwickeln, die zu einer Verbesserung der MR-Diagnostik von Gliomen führen. Im Vordergrund des Interesses stand dabei die MR-Charakterisierung von experimentellen Gliomen mittels superparamagnetischer Eisenoxide, wobei MION ("Monocrystalline-Iron-Oxide-Nanopartikel") als Modellsubstanz für einen Großteil der Untersuchungen benutzt wurde. In Experimenten zur Blut-Hirn-Schranke (BHS) wurde gezeigt, dass normales Hirngewebe jenseits der BHS mit Eisenoxiden erreicht werden kann, wenn artifiziell die BHS zuvor hyperosmotisch durch Mannitol-Infusion temporär geöffnet wurde. Neben der intrazellulären Aufnahme in Astrozyten werden Eisenoxide nach erfolgter BHS-Öffnung in signifikant höherem Maße von aktivierter Mikroglia phagozytiert. Nach selektiver Öffnung der BHS durch Bradykinin-Injektion in die A. carotis interna lässt sich selektiv der Transport von Eisenoxiden in das Gliomzentrum vergrößern. Am experimentellen Gliommodell ließ sich zeigen, dass intravenöse MION-Gabe zu einem charakteristischen ringförmigen Erscheinungsbild in der MRT der großen Tumoren führt: Die histologischen Untersuchungen bei mehreren Gliomarten (C6 und 9L) zeigen eindeutig die Phagozytose von Eisenpartikeln durch Gliomzellen selbst. Verglichen mit der Eisenoxid-Aufnahme in die Gliomzelle ist die Phagozytose der Eisenpartikel durch ortsständige Mikrogliazellen und Blutmakrophagen jedoch signifikant größer. Die intrazelluläre Aufnahme von MION durch Tumorzellen lies sich in Zellkulturexperimenten an verschiedenen Gliom- (C6, 9L) und Karzinom-Zelllinien (LX-1) bestätigen. In vitro konnte gezeigt werden dass die Konjugation von Transferrin (Tf) an eine Eisenoxidverbindung zu einer verstärkten intrazelluläre Aufnahme verglichen mit unkonjugiertem Verbindungen führt. Die Untersuchungen zur Bildgebung der Tumorvaskularisation von experimentellen Gliomen ergaben, dass durch die kombinatorische Anwendung eines kleinmolekularen und eines großmolekularen Markers mit anschließender einfacher Bildsubtraktion die vaskulären und interstitiellen Volumenfraktionen (VVF, IVF) ermittelt werden können. Auch die alleinige Injektion der noch experimentellen Blut-Pool-Marker MPEG-Pl-GdDTPA und Gadomer-17 ermöglicht im Tiermodell die quantitative Bestimmung sowohl des vaskulären Volumens (CBV) als auch der Permeabilität (P). Bei den Eisenoxiden verfälschen deren starke Suszeptibilitätseffekte die quantitative Bestimmung von Blutflussdaten, auch die Quantifizierung der Gefäßpermeabilität ist mit diesen Verbindungen mittels dynanischer MRT nicht möglich. / The aim of the studies was to develop new strategies for improving magnetic resonance imaging (MRI) of gliomas. In the majority of experiments the focus was on the characterization of experimental gliomas after administration of superparamagnetic iron oxides using MION (Monocrystalline Iron Oxide Nanoparticles) as a model compound. Experiments on the blood-brain barrier (BBB) demonstrated that iron oxides reach normal brain tissue beyond the BBB after their artificial, transient hyperosmotic opening by mannitol infusion. Upon opening of the BBB, iron oxides not only show intracellular uptake by astrocytes but are also phagocytosed in significantly higher amounts by activated microglia. Selective opening of the BBB by bradykinin injection into the internal carotid artery specifically increases the transport of iron oxides into the center of gliomas. Using an experimental glioma model, it was shown that intravenous administration of MION produces a characteristic ring enhancement of large tumors on MR images. Histologic studies of different types of gliomas (C6 and 9L) unequivocally demonstrated that iron oxide particles were phagocytosed by the glioma cells themselves. However, iron oxide uptake by glioma cells is significantly less pronounced compared to the phagocytosis of iron oxide particles by local microglial cells and blood macrophages. The incorporation of MION by tumor cells was confirmed in cell culture experiments using different glioma (C6, 9L) and carcinoma cell lines (LX-1). In vitro studies showed that conjugation of transferrin to an iron oxide compound enhanced intracellular uptake compared to unconjugated compounds. The imaging studies investigating tumor vascularization in experimental gliomas demonstrated that the combined use of a small-molecular and a large-molecular marker and simple image subtraction allow for determining vascular and interstitial volume fractions (VVF, IVF). Furthermore, injection of the blood pool markers MPEG-P1-Gd-DTPA and gadomer-17 alone likewise enables quantitative determination of both vascular volume (CBV) and permeability (P) in the animal model. Iron oxide particles, on the other hand, have pronounced susceptibility effects, which impair the quantitative determination of blood flow data. Nor do the particles allow for quantifying vascular permeability by dynamic MR imaging.

Investiga-se a influência de diferentes tratamentos sobre o sistema alumínio com cobertura de óxido de alumínio. A anodização do alumínio em meio de ácido sulfúrico e meio misto de sulfúrico e fosfórico foi empregada para alterar a resistência à corrosão, a espessura, o grau de cobertura e a microdureza do óxido anódico; e a eletrodeposição de ferro no interior óxido anódico em meio de sulfato com tratamento químico de selagem com cério, para alterar a sua condutividade elétrica e a sua resistência à corrosão. Para a eletrodeposição de ferro aplicou-se corrente contínua e pulsada e diversificou-se a composição do eletrólito de Fe(SO4)2(NH4)2.6H2O, com a adição dos ácidos bórico e ascórbico e para o tratamento de selagem, variou-se a concentração do CeCl3. A espectroscopia de energia dispersiva de raios X (EDS), a fluorescência de raios X (FRX) e a análise morfológica por microscopia eletrônica de varredura (MEV) permitiram verificar que, a corrente pulsada eleva o teor de ferro na camada anódica e a presença dos aditivos inibe a oxidação do ferro. As curvas cronopotenciométricas obtidas durante a eletrodeposição de ferro indicaram que a mistura dos ácidos bórico e ascórbico aumentaram a eficiência do processo de eletrodeposição. A espectroscopia de impedância eletroquímica (EIE), medidas de microdureza Vickers (H) e análise morfológica evidenciaram que o tratamento de selagem melhora a resistência à corrosão do filme óxido modificado com ferro. As medidas de impedância elétrica por duas pontas permitiram comprovar o aumento da condutividade elétrica do alumínio anodizado com ferro, mesmo após o tratamento com baixas concentrações de cério. Nanofios de ferro foram preparados utilizando os poros do óxido anódico como matriz. / The influence of different treatments on the aluminum system covered with aluminum oxide is investigated. The aluminum anodization in sulphuric media and in mixed sulphuric and phosphoric media was used to alter the corrosion resistance, thickness, coverage degree and microhardness of the anodic oxide. Iron electrodeposition inside the anodic oxide was used to change its electric conductivity and corrosion resistance. Direct and pulsed current were used for iron electrodeposition and the Fe(SO4)2(NH4)2.6H2O electrolyte composition was changed with the addition of boric and ascorbic acids. To the sealing treatment the CeCl3 composition was varied. The energy dispersive x-ray (EDS), the x-ray fluorescence spectroscopy (FRX) and the morphologic analysis by scanning electronic microscopy (SEM) allowed to verify that, the pulsed current increase the iron content inside the anodic layer and that the use of the additives inhibits the iron oxidation. The chronopotentiometric curves obtained during iron electrodeposition indicated that the boric and ascorbic acids mixture increased the electrodeposition process efficiency. The electrochemical impedance spectroscopy (EIE), the Vickers (H) microhardness measurements and morphologic analysis evidenced that the sealing treatment improves the corrosion resistance of the anodic film modified with iron. The electrical impedance (EI) technique allowed to prove the electric conductivity increase of the anodized aluminum with iron electrodeposited even after the cerium low concentration treatment. Iron nanowires were prepared by using the anodic oxide pores as template.