No / The surface energy of a-lactose monohydrate measured by inverse gas chromatography (IGC) is reported along with a dynamic molecular modelling study of the interaction of the various molecular probes with different surfaces of a-lactose monohydrate. The IGC results show that a-lactose monohydrate is acidic in nature. Using quantitative calculations of the energy of adsorption, the acidic nature of the surface is confirmed and the calculated values agree closely with the experimentally measured values. Along with the acidic nature, dynamic molecular modelling also reveals that the presence of a channel and water molecules on a surface affects the surface energetics of that face. The presence of water on the surface can decrease or increase the surface energy by either blocking or attracting a probe molecule, respectively. This property of water depends on its position and association with other functional groups present on the surface. The effect of a channel or cavity on the surface energy is shown to depend on its size, which determines whether the functional groups in the channel are assessable by probe molecules or not. Overall molecular modelling explains, at the molecular level, the effect of different factors affecting the surface energy of individual faces of the crystal.

Submitted by Diego Luiz Tita (diego.tita@gmail.com) on 2018-05-11T17:51:31Z No. of bitstreams: 1 DR_TITA_DL_FINAL_A.pdf: 8672085 bytes, checksum: af81639f689b5a5fc78999ae952240a8 (MD5) / Approved for entry into archive by Ana Carolina Gonçalves Bet null (abet@iq.unesp.br) on 2018-05-15T12:53:22Z (GMT) No. of bitstreams: 1 tita_dl_dr_araiq_int.pdf: 8328482 bytes, checksum: be0fe77b0059e1880c4d517105e2c2f6 (MD5) / Made available in DSpace on 2018-05-15T12:53:22Z (GMT). No. of bitstreams: 1 tita_dl_dr_araiq_int.pdf: 8328482 bytes, checksum: be0fe77b0059e1880c4d517105e2c2f6 (MD5) Previous issue date: 2018-04-20 / O refinamento de estruturas cristalinas pelo método de Rietveld (MR) consiste em ajustar um modelo estrutural a uma medida de difração. Essa é uma ferramenta eficiente para identificação e quantificação de estruturas polimórficas presentes em fármacos e excipientes. Uma forma avançada do método é o refinamento sequencial por Rietveld (RSR) que visa, a partir de um conjunto de difratogramas de uma mesma amostra, estudar o comportamento do material em função de uma variável externa (e.g. temperatura, pressão, tempo ou ambiente químico). No presente trabalho, com o objetivo de estudar as transições polimórficas e as expansões/contrações dos parâmetros de cela unitária (PCU) dos insumos farmacêuticos: espironolactona (SPR), lactose monoidratada (LACMH) e lactose anidra (LACA), empregou-se o RSR em medidas obtidas em diferentes temperaturas. O RSR foi eficiente para que os PCU fossem refinados até temperaturas próximas ao ponto de fusão dos materiais. Após o RSR, a partir da análise matemática dos PCU obtidos, foram propostas funções que regem a tendência desses parâmetros quando submetidos à variação de temperatura. Com essas funções modelaram-se os PCU em uma outra modalidade de refinamento, o refinamento paramétrico por Rietveld (RPR), assim, os PCU seguem a modelagem imposta pelas equações obtidas via RSR. O RPR mostrou-se mais eficiente nas análises, o que evitou perda de fases ou problemas de ajustes, resultando assim em informações mais precisas do sistema. Embora o RSR e RPR serem métodos sofisticados para a caracterização dos materiais, a preparação das rotinas de programação dos refinamentos não é trivial, assim, nesse trabalho desenvolveu-se uma planilha (i.e. planilha SP-DLT) que facilita o emprego dos métodos. A planilha mostrou-se eficiente e rápida para programar todas as rotinas de refinamentos apresentadas nesse trabalho. Com os estudos dos insumos farmacêuticos observou-se que na amostra SPR a forma I, com o aumento da temperatura, se converte para forma II. A alfalactose monoidratada sofre desidratação e se converte para alfalactose, na amostra LACMH, e para betalactose, na amostra LACA. E, ainda com aumento de temperatura, a betalactose não sofre mudança de fase polimórfica. Assim, entende-se que o meio pode causar influência na rota de transição polimórfica. / The crystal structural refinement by the Rietveld method (MR) consists of fitting a structural model to a diffraction measure. This is an efficient tool for identification and quantification of polymorphic structures present in drugs and excipients. An advanced way to use this method is the Sequential Rietveld Refinement (RSR), which aims, from a set of data of the same sample, to study the behavior of the material as a function of an external variable (e.g. temperature, pressure, time or chemical environment). In the present work, with the objective of studying the polymorphic transitions and the expansions / contractions of the unit cell parameters (PCU) of the pharmaceutical ingredients: spironolactone (SPR), lactose monohydrate (LACMH) and anhydrous lactose (LACA), the RSR in measurements obtained at different temperatures. The RSR was efficient so that the PCU were refined to temperatures close to the melting point of the materials. After the RSR, from the mathematical analysis of the obtained PCU, functions were proposed that govern the trend of these parameters when submitted to the temperature variation. With these functions the PCU were modeled in another modality of refinement, the Parametric Rietveld Refinement (RPR), thus, the PCU follow the modeling imposed by the equations obtained via RSR. The RPR was more efficient in the analyzes, which avoided loss of phases or problems of adjustments, resulting in more accurate information of the system. Although RSR and RPR are sophisticated methods for characterization of materials, preparation of refinement programming routines is not trivial, so a spreadsheet (i.e. SP-DLT spreadsheet) has been developed in this paper to facilitate the use of methods. The worksheet proved to be efficient and quick to program all the refinement routines presented in this paper. With the studies of the pharmaceutical inputs it was observed that in the SPR sample, the form I, with the increase in temperature, converts to form II. Alfalactose monohydrate undergoes dehydration and converts to alfalactose in the LACMH sample and to betalactose in the LACA sample. And, even with temperature increase, the betalactose does not undergo polymorphic phase change. Thus, it is understood that the medium may cause influence on the polymorphic transition route.

Orientador: Carlos de Oliveira Paiva Santos / Coorientadora: Selma Gutierrez Antonio / Banca: Marlus Chorilli / Banca: Vinícius Danilo Nonato Bezzon / Banca: Flavio Machado de Souza Carvalho / Banca: Alexandre Urbano / Resumo: O refinamento de estruturas cristalinas pelo método de Rietveld (MR) consiste em ajustar um modelo estrutural a uma medida de difração. Essa é uma ferramenta eficiente para identificação e quantificação de estruturas polimórficas presentes em fármacos e excipientes. Uma forma avançada do método é o refinamento sequencial por Rietveld (RSR) que visa, a partir de um conjunto de difratogramas de uma mesma amostra, estudar o comportamento do material em função de uma variável externa (e.g. temperatura, pressão, tempo ou ambiente químico). No presente trabalho, com o objetivo de estudar as transições polimórficas e as expansões/contrações dos parâmetros de cela unitária (PCU) dos insumos farmacêuticos: espironolactona (SPR), lactose monoidratada (LACMH) e lactose anidra (LACA), empregou-se o RSR em medidas obtidas em diferentes temperaturas. O RSR foi eficiente para que os PCU fossem refinados até temperaturas próximas ao ponto de fusão dos materiais. Após o RSR, a partir da análise matemática dos PCU obtidos, foram propostas funções que regem a tendência desses parâmetros quando submetidos à variação de temperatura. Com essas funções modelaram-se os PCU em uma outra modalidade de refinamento, o refinamento paramétrico por Rietveld (RPR), assim, os PCU seguem a modelagem imposta pelas equações obtidas via RSR. O RPR mostrou-se mais eficiente nas análises, o que evitou perda de fases ou problemas de ajustes, resultando assim em informações mais precisas do sistema. Embora o RSR e R... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The crystal structural refinement by the Rietveld method (MR) consists of fitting a structural model to a diffraction measure. This is an efficient tool for identification and quantification of polymorphic structures present in drugs and excipients. An advanced way to use this method is the Sequential Rietveld Refinement (RSR), which aims, from a set of data of the same sample, to study the behavior of the material as a function of an external variable (e.g. temperature, pressure, time or chemical environment). In the present work, with the objective of studying the polymorphic transitions and the expansions / contractions of the unit cell parameters (PCU) of the pharmaceutical ingredients: spironolactone (SPR), lactose monohydrate (LACMH) and anhydrous lactose (LACA), the RSR in measurements obtained at different temperatures. The RSR was efficient so that the PCU were refined to temperatures close to the melting point of the materials. After the RSR, from the mathematical analysis of the obtained PCU, functions were proposed that govern the trend of these parameters when submitted to the temperature variation. With these functions the PCU were modeled in another modality of refinement, the Parametric Rietveld Refinement (RPR), thus, the PCU follow the modeling imposed by the equations obtained via RSR. The RPR was more efficient in the analyzes, which avoided loss of phases or problems of adjustments, resulting in more accurate information of the system. Although RSR and RP... (Complete abstract click electronic access below) / Doutor

No / The current work was undertaken to assess suitability of liquid crystalline phase for engineering of lactose crystals and their utility as a carrier in dry powder inhalation formulations. Saturated lactose solution was poured in molten glyceryl monooleate which subsequently transformed into gel. The gel microstructure was analyzed by PPL microscopy and SAXS. Lactose particles recovered from gels after 48 h were analyzed for polymorphism using techniques such as FTIR, XRD, DSC and TGA. Particle size, morphology and aerosolisation properties of prepared lactose were analyzed using Anderson cascade impactor. In situ seeding followed by growth of lactose crystals took place in gels with cubic microstructure as revealed by PPL microscopy and SAXS. Elongated (size approximately 71 mum) lactose particles with smooth surface containing mixture of alpha and beta-lactose was recovered from gel, however percentage of alpha-lactose was more as compared to beta-lactose. The aerosolisation parameters such as RD, ED, %FPF and % recovery of lactose recovered from gel (LPL) were found to be comparable to Respitose(R) ML001. Thus LC phase (cubic) can be used for engineering of lactose crystals so as to obtain particles with smooth surface, high elongation ratio and further they can be used as carrier in DPI formulations.