In the thesis presented, three novel uni-planar left handed transmission lines based on Complementary Split Ring Resonators (CSRR) and Complementary Spiral Resonator (CSR) metamaterial particles are proposed for the first time and successfully applied for the performance enhancement of conventional coupled line filters and the design of a full scan leaky wave antenna. Based on the implementation of Complementary Split Ring Resonators (CSRR) a fully planar Composite Right left handed transmission line (CRLH-TL) plus a Dual Composite Right Left Handed transmission line (D-CRLH-TL) are proposed, designed and studied. The CRLH transmission line is realized loading a microstrip host line with CSRR metamaterial particles and capacitive gaps on the conductor strip of the line, while the D-CRLH transmission line is built bridging the capacitive gaps between the CSRR's with inductive connections to induce dual propagation properties in the structure. A further performance enhancement is achieved by a second proposal based on the implementation of Complementary Spiral Resonators (CSRs). The studies applied to the structure reveal that conditions for D-CRLH propagation are created in a transmission line composed only by CSR metamaterial resonant particles as the result of the unique electromagnetic properties acquired by the CSRs etched on the conductor line of a microstrip waveguide. The CSRR/CSR based D-CRLH transmission lines proposed are applied in the design of two enhanced coupled line filters. The implementation is possible for the first time in this work as result of the highly versatile layout features of the left handed transmission lines proposed which among other important geometrical features, allows couplings in both sides of the structure. Enhanced filtering features are reached by the metamaterial based coupled line filters proposed in terms of selectivity and size reduction in comparison with conventional coupled line filters. In the case of the CSRR loaded metamaterial coupled line filter a size reduction of 49% is achieved compared with a filter of similar performance. A further enhancement is reached by the second coupled filter proposed based on CSR metamaterial resonant particles. The CSR coupled filter proposed reach a roll off rate improvement of 8 dB/GHz and size reduction of 43% in comparison with a conventional coupled line filter of the same order. When this is compared against a conventional coupled line filter of similar performance but higher order, a remarkable size reduction of 77% is achieved by the proposed CSR coupled line filter. Finally, the CSR loaded D-CRLH transmission line is applied in the design of a fully planar leaky wave antenna. Using the CSR structures etched on the conductor line of a microstrip as part of the radiation mechanism altogether with the D-CRLH propagation features of the structure. A full scan radiation pattern is created with backward, forward and broadside radiation as result of the left handed propagation band, right handed propagation band and the balanced transition between them. Two leaky wave antennas are designed to operate at the centre frequencies of 12.5GHz and 6.0GHz. In order to corroborate the performance the CSR D-CRLH leaky wave antenna operating at 6.0GHz is fabricated and measured showing a scanning range of 30 deg with a maximum gain of 13.2 dBi.

In this work, waveguides with simultaneous negative dielectric permittivity and magnetic permeability, otherwise known as left-handed waveguides, are investigated. An approach of formulating and solving an eigenvalue problem with finite element method resulting in the dispersion relation of the waveguides is adopted in the analysis. Detailed methodology of one-dimensional scalar and two-dimensional vector finite element formulation for the analysis of grounded slab and arbitrary shaped waveguides is presented. Based on the analysis, for waveguides with conventional media, excellent agreement of results is observed between the finite element approach and the traditional approach. The method is then applied to analyze left-handed waveguides and anomalous dispersion of modes is found. The discontinuity structure of a left-handed waveguide sandwiched between two conventional dielectric slab waveguides is analyzed using mode matching technique and the results are discussed based on the inherent nature of the materials. The scattering characteristics of a parallel plate waveguide partially filled with left-handed and conventional media are also analyzed using finite element method with eigenfunction expansion technique.

No description available.

Yes / The paper demonstrates an effective technique to significantly enhance the bandwidth and radiation gain of an otherwise narrowband composite right/left-handed transmission-line (CRLH-TL) antenna using a non-Foster impedance matching circuit (NF-IMC) without affecting the antenna's stability. This is achieved by using the negative reactance of the NF-IMC to counteract the input capacitance of the antenna. Series capacitance of the CRLH-TL unit-cell is created by etching a dielectric spiral slot inside a rectangular microstrip patch that is grounded through a spiraled microstrip inductance. The overall size of the antenna, including the NF-IMC at its lowest operating frequency is 0.335λ0 × 0.137λ0 × 0.003λ0, where λ0 is the free-space wavelength at 1.4 GHz. The performance of the antenna was verified through actual measurements. The stable bandwidth of the antenna for |S11|≤ - 18 dB is greater than 1 GHz (1.4-2.45 GHz), which is significantly wider than the CRLH-TL antenna without the proposed impedance matching circuit. In addition, with the proposed technique the measured radiation gain and efficiency of the antenna are increased on average by 3.2 dBi and 31.5% over the operating frequency band. / This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.

This thesis deals with the laterality and the ways of diagnosis at children. It is divided into three parts - theoretical, practical and appendixes. The theoretical part deals with laterality, methods of diagnostic and methodology of work with left-handed pupil at the beginning of the school attendance. The aim of research in the practical part of the thesis was to find information about working with left-handed pupils between the students of primary teaching and teachers in practise. The appendixes of this thesis include the questionnaires used for the practical part of the thesis and worksheets for pupils to relax their hand while writing.

This thesis focuses mostly on investigating different potential applications of meta-transmission line (TL), particularly composite right/left handed (CRLH) TL, and analyzing some new phenomena and applications of meta-TL, mostly left-handed (LH) TL. Realization principle will also be studied.   First, the fundamental electromagnetic properties of propagation in the presence of left-handed material (LHM) are illustrated. The transmission line approach for LHM design is described together with a brief review of the transmission line theory. As a generalized model for LHM TL, CRLH TL provides very unique phase response, such as dual-band operation, bandwidth enhancement, nonlinear dispersion, and the existence of critical frequency with zero phase velocity. Based on these properties, some novel applications of the existing CRLH transmission lines are then given, including a notch filter, a diplexer, a broadband phase shifter, a broadband balun, and a dual band rat-ring coupler. In the design of notch filters and diplexers, CRLH TL shunt stub is utilized to provide high frequency selectivity due to the existence of critical frequency with zero phase velocity. The proposed wideband Wilkinson balun, which comprises of one section of conventional transmission lines and one section of CRLH-TL, is shown to have a 180°±10° bandwidth of 2.12 GHz centered at 1.5 GHz. In the analysis of the dual band rat-ring couplers, a generalized formulation of the requirements about impedances and electrical length of the branches are derived, and as an example, a compact dual-band rat-race coupler is designed utilizing the balanced CRLH TL. Furthermore, a low pass filter is also proposed and designed based on a single (epsilon) negative coplanar waveguide (CPW).Various principles to realize meta-transmission lines are investigated. The main conclusions are listed below:Ÿ         Dual composite right/left handed (D-CRLH) transmission line, which is the dual structure of conventional CRLH TL, shows opposite handedness in the high frequencies and low frequencies with CRLH TL. Meanwhile, in the practical implementation, D-CRLH TL always shows a sharp stopband. A notch filter and a dual-band balun are designed based on D-CRLH TL. Ÿ         The lattice type transmission line (LT-TL) shows the same magnitude response with the conventional right-handed (RH) TL, but a constant phase difference in the phase response over a wide frequency band. A wideband rat-race coupler is proposed as an application of the LT-TL. Ÿ         Finger-shorted interdigital capacitors (FSIDCs) are analyzed and it is shown that FSIDC alone can act as a left-handed transmission line. The value of the reactive elements (inductors and capacitors) in the equivalent circuit model is determined by the dimensions of FSIDC. The relationship between them is analyzed.Later, transmission line loaded with negative-impedance-converted inductors and capacitors is illustrated as the first non-dispersive LH transmission line. The design of a negative series impedance converter is given in detail and a wideband power divider is designed as a potential application of the newly proposed meta-transmission lines in is also given. The final part of the thesis focuses on the study of microstrip lines loaded with complementary split ring resonators (SRRs). An equivalent circuit is made for this structure. The circuit model is verified by the experimental results of cases with different periodic lengths. Thereafter, a meander line split ring resonator (MLSRR) is presented. It shows dual band property and the miniature prototypes of complementary MLSRR loaded transmission lines are fabricated. By comparing the resonance frequencies of complementary MLSRR and multiple SRR, it is shown that the complementary MLSRR is very compact. C-MLSRR is applied in rejecting unnecessary frequencies in the ultra wideband antennas. / QC 20100720

This thesis introduces efficient numerical techniques for the analysis of novel electromagnetic metamaterials. The modelling is based on a Method of Moments modal analysis in conjunction with an interpolation scheme, which significantly accelerates the computations. Triangular basis functions are used that allow for modelling of arbitrary shaped metallic elements. Unlike the conventional methods, impedance interpolation is applied to derive the dispersion characteristics of planar periodic structures. With these techniques, the plane wave and the surface wave responses of fractal structures have been studied by means of transmission coefficients and dispersion diagrams. The multiband properties and the compactness of the proposed structures are presented. Based on this method, novel planar left-handed metamaterials are also proposed. Verifications of the left-handedness are presented by means of full wave simulation of finite planar arrays using commercial software and lab measurement. The structures are simple, readily scalable to higher frequencies and compatible with low-cost fabrication techniques.

Artificial magnetic materials (AMMs) are a type of metamaterials which are engineered to exhibit desirable magnetic properties not found in nature. AMMs are realized by embedding electrically small metallic resonators aligned in parallel planes in a host dielectric medium. In the presence of a magnetic field, an electric current is induced on the inclusions leading to the emergence of an enhanced magnetic response inside the medium at the resonance frequency of the inclusions. AMMs with negative permeability are used to develop single negative, or double negative metamaterials. AMMs with enhanced positive permeability are used to provide magneto-dielectric materials at microwave or optical frequencies where the natural magnetic materials fail to work efficiently. Artificial magnetic materials have proliferating applications in microwave and optical frequency region. Such applications include inversely refracting the light beam, invisibility cloaking, ultra miniaturizing and frequency bandwidth enhancing low profile antennas, planar superlensing, super-sensitive sensing, decoupling proximal high profile antennas, and enhancing solar cells efficiency, among others. AMMs have unique enabling features that allow for these important applications. Fundamental limitations on the performance of artificial magnetic materials have been derived. The first limitation which depends on the generic model of permeability functions expresses that the frequency dispersion in an AMM is limited by the desired operational bandwidth. The other constraints are derived based on the geometrical limitations of inclusions. These limitations are calculated based on a circuit model. Therefore, a formulation for permeability and magnetic susceptibility of the media based on a circuit model is developed. The formulation is in terms of a geometrical parameter that represents the geometrical characteristics of the inclusions such as area, perimeter and curvature, and a physical parameter that represents the physical, structural and fabrication characteristics of the medium. The effect of the newly introduced parameters on the effective permeability of the medium and the magnetic loss tangent are studied. In addition, the constraints and relations are used to methodically design artificial magnetic material meeting specific operational requirements. A novel design methodology based on an introduced analytical formulation for artificial magnetic material with desired properties is implemented. The synthesis methodology is performed in an iterative four-step algorithm. In the first step, the feasibility of the design is tested to meet the fundamental constraints. In consecutive steps, the geometrical and physical factors which are attributed to the area and perimeter of the inclusion are synthesized and calculated. An updated range of the inclusion's area and perimeter is obtained through consecutive iterations. Finally, the outcome of the iterative procedure is checked for geometrical realizability. The strategy behind the design methodology is generic and can be applied to any adopted circuit based model for AMMs. Several generic geometries are introduced to realize any combination of geometrically realizable area and perimeter (s,l) pairs. A realizable geometry is referred to a contour that satisfies Dido's inequality. The generic geometries introduced here can be used to fabricate feasible AMMs. The novel generic geometries not only can be used to enhance magnetic properties, but also they can be configured to provide specific permeability with desired dispersion function over a certain frequency bandwidth with a maximum magnetic loss tangent. The proposed generic geometries are parametric contours with uncorrelated perimeter and area function. Geometries are configured by tuning parameters in order to possess specified perimeter and surface area. The produced contour is considered as the inclusion's shape. The inclusions are accordingly termed Rose curve resonators (RCRs), Corrugated rectangular resonators (CRRs) and Sine oval resonators (SORs). Moreover, the detailed characteristics of the RCR are studied. The RCRs are used as complementary resonators in design of the ground plane in a microstrip stop-band filter, and as the substrate in design of a miniaturized patch antenna. The performance of new designs is compared with the counterpart devices, and the advantages are discussed.

Η εφαρμογή της μικροκυματικής ραδιομετρίας έχει επεκταθεί στο χώρο της ιατρικής, καθότι τα τελευταία χρόνια γίνονται έρευνες με σκοπό την εκμετάλλευση των ιδιοτήτων της μεθόδου στη διαγνωστική αλλά και στη θεραπευτική ιατρική. Στα πλαίσια μιας διδακτορικής διατριβής που εκπονήθηκε στο Εργαστήριο Μικροκυμάτων και Οπτικών Ινών (ΕΜΟΙ) της σχολής Ηλεκτρολόγων Μηχανικών και Μηχανικών Υπολογιστών του Εθνικού Μετσόβιου Πολυτεχνείου και ολοκληρώθηκε το 2003, κατασκευάστηκε ένα τρισδιάστατο σύστημα παθητικής μικροκυματικής ραδιομετρικής απεικόνισης (ΜiRaIS) για διαγνωστικές εφαρμογές εγκεφάλου. Στη συγκεκριμένη μέθοδο χρησιμοποιείται μια αγώγιμη ελλειψοειδής κοιλότητα, ώστε να επιτευχθεί μέγιστη συγκέντρωση και εστίαση ακτινοβολίας που εκπέμπει το φυσικό σώμα ενδιαφέροντος, σε συνδυασμό με ραδιομετρικούς δέκτες ολικής ισχύος και ομοιοκατευθυντικές κεραίες λήψης στο φάσμα συχνοτήτων 1-4GHz. Στην παρούσα διπλωματική εργασία γίνεται θεωρητική και πειραματική μελέτη ενός νέου μικροκυματικού ραδιομετρικού συστήματος. Η αρχή λειτουργίας του είναι όμοια με αυτήν του MiRaIS, δηλαδή πλήρως παθητική και μη επεμβατική. Η βασική διαφορά του είναι ότι χρησιμοποιεί μια τροποποιημένη ελλειψοειδή κοιλότητα η οποία βελτιώνει την εργονομία του συστήματος διατηρώντας παράλληλα της ιδιότητες εστίασης του πρωτότυπου ελλειψοειδούς. Στη θεωρητική μελέτη, με τη βοήθεια του λογισμικού High Frequency Structure Simulation (HFSS) που βασίζεται στη μέθοδο των πεπερασμένων στοιχείων, αναλύονται δυο μέθοδοι για τη βελτίωση των ιδιοτήτων εστίασης του συστήματος (πχ. βάθος διείσδυσης της ακτινοβολίας, χωρική διακριτική ικανότητα) με τη χρήση διηλεκτρικών υλικών και υλικών με αρνητικό δείκτη διάθλασης (Left Handed Materials-LHM). Στην πρώτη περίπτωση, τα υλικά αυτά χρησιμοποιούνται ως στρώματα προσαρμογής που τοποθετούνται γύρω από το μοντέλο κεφαλιού για την επίτευξη βηματικής αλλαγής του δείκτη διάθλασης στη διεπιφάνεια αέρα-μοντέλου ανθρώπινου κεφαλιού. Στη δεύτερη προσέγγιση του προβλήματος, χρησιμοποιείται μια σφαίρα από διηλεκτρικό σε συνδυασμό με ένα στρώμα προσαρμογής από LHM για την καλύτερη εστίαση του συστήματος. Προς την ίδια κατεύθυνση, στη δεύτερη αυτή περίπτωση χρησιμοποιείται επίσης ένας ελλειψοειδής ανακλαστήρας μειωμένου όγκου το εσωτερικό του οποίου είναι γεμάτο με διηλεκτρικό με χαμηλές απώλειες, με τα αποτελέσματα να δείχνουν σημαντική βελτίωση της χωρικής διακριτικής ικανότητας του συστήματος. Η πειραματική διάταξη τοποθετήθηκε σε ανηχοϊκό θάλαμο όπου και πραγματοποιήθηκαν όλες οι μετρήσεις. Στις πειραματικές διαδικασίες που ακολουθήθηκαν, χρησιμοποιήθηκαν ομοιώματα νερού (phantoms) σε διάφορα μεγέθη και θερμοκρασίες για την επιβεβαίωση της διατήρησης των ιδιοτήτων εστίασης του νέου ελλειψοειδούς ανακλαστήρα. Επίσης, διενεργήθηκαν μετρήσεις με στρώματα προσαρμογής φτιαγμένα από διηλεκτρικά υλικά, τα οποία τοποθετούνταν γύρω από το αντικείμενο ενδιαφέροντος, για την πληρέστερη κατανόηση της επίδρασης των υλικών αυτών στις ιδιότητες εστίασης του συστήματος και για την επιβεβαίωση των αντίστοιχων θεωρητικών αποτελεσμάτων. / In the framework of a PhD thesis which was completed in the Laboratory of Microwaves and Fiber Optics (MFOL), School of Electrical and Computer Engineering, National Technical University of Athens (NTUA) in 2003, a Three Dimensional Passive Microwave Radiometry Imaging System (MiRaIS) was designed and constructed for brain diagnostic applications. The novelty of the proposed methodology consists in the use of a conductive ellipsoidal cavity to achieve maximum peak of radiation pattern in order to measure the intensity of the microwave energy, radiated by the medium of interest, by using two microwave total power radiometers and relevant non-contacting antennas within the range of 1-4GHz. In the present thesis, a new microwave radiometry system is theoretically and experimentally studied. It has the same operation principal with MiRaIS as it operates in an entirely non-invasive and passive manner. Its main difference is that it comprises a modified ellipsoidal cavity which improves the system’s ergonomy preserving the focusing properties of the original cavity. In the theoretical study, two methods for the improvement of the system’s focusing properties (e.g. penetration depth of the electromagnetic field, spatial sensitivity) using dielectric materials and left-handed materials (LHM) are tested with the use of a commercially available software tool, High Frequency Structure Simulation (HFSS). In the first case, those materials are used as matching layers placed around the human head model for the achievement of stepped change of the refraction index on the air-human head model interface. On the second approach, a sphere made of dielectric material is used in conjunction with a LHM matching layer in order to improve the system’s spatial sensitivity. Towards the same direction, a reduced volume ellipsoidal cavity filled with low loss dielectric material is used showing promising results. The experiments were performed inside an anechoic chamber providing maximum accuracy avoiding any external intergerence. In the experimental procedures that were performed, water phantoms of several sizes and temperatures were used in order to confirm that the new ellipsoidal beamformer maintains the focusing properties of the original one. Also, measurements were conducted using dielectric matching layers, placed around the medium of interest, in order to fully understand the effect of those materials in the system’s focusing properties as well as confirm the relative theoretical results.

Artificial magnetic materials (AMMs) are a type of metamaterials which are engineered to exhibit desirable magnetic properties not found in nature. AMMs are realized by embedding electrically small metallic resonators aligned in parallel planes in a host dielectric medium. In the presence of a magnetic field, an electric current is induced on the inclusions leading to the emergence of an enhanced magnetic response inside the medium at the resonance frequency of the inclusions. AMMs with negative permeability are used to develop single negative, or double negative metamaterials. AMMs with enhanced positive permeability are used to provide magneto-dielectric materials at microwave or optical frequencies where the natural magnetic materials fail to work efficiently. Artificial magnetic materials have proliferating applications in microwave and optical frequency region. Such applications include inversely refracting the light beam, invisibility cloaking, ultra miniaturizing and frequency bandwidth enhancing low profile antennas, planar superlensing, super-sensitive sensing, decoupling proximal high profile antennas, and enhancing solar cells efficiency, among others. AMMs have unique enabling features that allow for these important applications. Fundamental limitations on the performance of artificial magnetic materials have been derived. The first limitation which depends on the generic model of permeability functions expresses that the frequency dispersion in an AMM is limited by the desired operational bandwidth. The other constraints are derived based on the geometrical limitations of inclusions. These limitations are calculated based on a circuit model. Therefore, a formulation for permeability and magnetic susceptibility of the media based on a circuit model is developed. The formulation is in terms of a geometrical parameter that represents the geometrical characteristics of the inclusions such as area, perimeter and curvature, and a physical parameter that represents the physical, structural and fabrication characteristics of the medium. The effect of the newly introduced parameters on the effective permeability of the medium and the magnetic loss tangent are studied. In addition, the constraints and relations are used to methodically design artificial magnetic material meeting specific operational requirements. A novel design methodology based on an introduced analytical formulation for artificial magnetic material with desired properties is implemented. The synthesis methodology is performed in an iterative four-step algorithm. In the first step, the feasibility of the design is tested to meet the fundamental constraints. In consecutive steps, the geometrical and physical factors which are attributed to the area and perimeter of the inclusion are synthesized and calculated. An updated range of the inclusion's area and perimeter is obtained through consecutive iterations. Finally, the outcome of the iterative procedure is checked for geometrical realizability. The strategy behind the design methodology is generic and can be applied to any adopted circuit based model for AMMs. Several generic geometries are introduced to realize any combination of geometrically realizable area and perimeter (s,l) pairs. A realizable geometry is referred to a contour that satisfies Dido's inequality. The generic geometries introduced here can be used to fabricate feasible AMMs. The novel generic geometries not only can be used to enhance magnetic properties, but also they can be configured to provide specific permeability with desired dispersion function over a certain frequency bandwidth with a maximum magnetic loss tangent. The proposed generic geometries are parametric contours with uncorrelated perimeter and area function. Geometries are configured by tuning parameters in order to possess specified perimeter and surface area. The produced contour is considered as the inclusion's shape. The inclusions are accordingly termed Rose curve resonators (RCRs), Corrugated rectangular resonators (CRRs) and Sine oval resonators (SORs). Moreover, the detailed characteristics of the RCR are studied. The RCRs are used as complementary resonators in design of the ground plane in a microstrip stop-band filter, and as the substrate in design of a miniaturized patch antenna. The performance of new designs is compared with the counterpart devices, and the advantages are discussed.