No description available.

<p>This thesis focuses on the design and evaluation of the meander-line antenna geometry. One standard meander-line antenna and other two non-standard meander antennas have been studied. These printed antennas are discussed with the goal of identifying which is suitable for use in a miniaturized wireless transceiver design and which is able to provide the better performance using minimal Printed Circuit Board (PCB) space. In a word, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency.</p><p>The performance of each antenna is evaluated based on return loss, operational bandwidth, and radiation pattern characteristics. During our measurement, return loss is measured by reading the S11-port reflection coefficient on Vector Network Analyzer (VNA). This coefficient can be used to characterize how well the antenna is able to be efficiently fed. Operational bandwidth is measured as the frequency range over which the antenna keeps the value of Voltage Standing Wave Ratio (VSWR) or equivalently has -10dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected characteristics which are resonant frequency, bandwidth, VSWR, and radiation pattern. HFSS is used to provide a good guide for the antenna design before the actual prototype is manufactured. Simulated results are compared with results of measurement to point out the differences and help demonstrate the practical effects on antenna performance. Radiation pattern are measured to illustrate the effects of antenna miniaturization. All the above measurements are done in the anechoic chamber.</p>

In the 1990s, the MLA sector – archives, libraries, museums – was defined as a comprehensive sector. One of the reasons for this was the belief that the digitizing of institutional collections and catalogues would provide a seamless access to the cultural heritage for the general public. No one would any longer need to know in which institution a certain object was kept; everything would be available on the Internet. The questions in this dissertation depart from the expectations in the late 1900s aimed at the available systems in the MLA sector for the management and storage of information and at knowledge maintained in such systems. My point of departure is the idea that access to collections in the MLA sector – real or digital – is made possible through the catalogues. It is in the catalogues that the sector orders data and preserves knowledge collected about the objects. My most important conclusions deal with the management and production of knowledge in the sector. The data systems generally used in the MLA sector lack the indulgence needed to accommodate inherent variability of information. Systems must be based on exact sorting, uniform terminology and classification without deviations in spelling or interpretation. Furthermore, international projects and systems presuppose distinct translations between national terminologies and international classification systems to work for information retrievals. This is not the case with the museum systems here investigated, in opposition to, primarily, the libraries. The museum systems are characterised as distinctive instead of following uniformity principles and national or international taxonomies. An important conclusion about knowledge processing and knowledge production in the MLA sector is that the value of compiling digitalised data from many museums is limited. It is not possible to realize the political goal other than at a superficial level. The conclusions in a comparison between the three professional groups are that in the beginning of the 21th century an extensive part of the antiquarians confirm a thought style, according to Ludwik Fleck, which has another direction than that of archivists and librarians. Throughout the 20th century or in the last decades of the 20th century the two latter groups professionalised their roles both through changes in education and through new professional requirements which led to positions and attitudes in their work other than what happened in the museum sector. Museums are mainly research institutions with members of staff who in many respects lack a focus on increased accessibility of collections. Challenges formulated for museums of cultural history by the cultural politics of the 1970s have not been answered with great flexibility. The investigation in this dissertation demonstrates that archives, libraries and museums in many respects continue to pursue activities according to a thought style which was formed during the first half of the 20th century. Their positions in society, their administrational practice and expectations from the general public constitute stabilising and preserving factors. The MLA sector is not as comprehensive as the policy makers want to believe.

This thesis focuses on the design and evaluation of the meander-line antenna geometry. One standard meander-line antenna and other two non-standard meander antennas have been studied. These printed antennas are discussed with the goal of identifying which is suitable for use in a miniaturized wireless transceiver design and which is able to provide the better performance using minimal Printed Circuit Board (PCB) space. In a word, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency. The performance of each antenna is evaluated based on return loss, operational bandwidth, and radiation pattern characteristics. During our measurement, return loss is measured by reading the S11-port reflection coefficient on Vector Network Analyzer (VNA). This coefficient can be used to characterize how well the antenna is able to be efficiently fed. Operational bandwidth is measured as the frequency range over which the antenna keeps the value of Voltage Standing Wave Ratio (VSWR) or equivalently has -10dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected characteristics which are resonant frequency, bandwidth, VSWR, and radiation pattern. HFSS is used to provide a good guide for the antenna design before the actual prototype is manufactured. Simulated results are compared with results of measurement to point out the differences and help demonstrate the practical effects on antenna performance. Radiation pattern are measured to illustrate the effects of antenna miniaturization. All the above measurements are done in the anechoic chamber.

Syfte: Att med hjälp av videoanalys och programvaran Dartfish, undersöka eventuella skillnader i stödfasen på vinkeln mellan calcaneus och underlaget, hos personer med Pes planus och pes cavus, både efter en- och 45 minuters löpning på löpband.  Studiedesign: En experimentell studie. Metod: Trettiofyra personer vars fot/fötter uppmättes till pes cavus och pes planus enligt kriterierna för Medial Longitudinale Arch -angle, inkluderades i studien. Mätningarna gjordes på en stillbild med digital goniometer i programvaran Dartfish. Därefter mättes calcaneus vertikala mittlinje i förhållande till underlaget i stödfasen både efter 1 minut och 45 minuter, när försökspersonerna sprang barfota på ett löpband. Resultat: Båda fotvalvsgrupperna visade ett signifikant lägre värde, d vs ökad valgusriktning av calcaneus till underlaget, efter 45 minuter jämfört med 1 minuts löpning (p&lt;0.05). Konklusion: Både pes cavus och pes planus tenderar att inta en calcaneusställning mer åt valgus efter 45 minuters löpning. Det behövs fortsatt forskning för att klargöra förändringen av biomekaniken efter längre tids löpning. Studiens resultat antyder att framtida studier som undersöker sambandet mellan skador och abnormala fotrörelser under belastning  även bör undersöka efter längre tids löpning.

Mineral Liberation Analyzer (MLA) is an automated mineralogical system originally developed to characterize ore and mill feeds for the metallurgical processing industry. Its ability to quantitatively characterize solid and particulate material, including whole rock thin sections, waste rock, tailings, soil, and sediments, has led to increasing applications in other industries. The software uses back-scatter electron imagery and energy dispersive X-ray analysis to analyze each particle’s shape, size, and mineralogical information. Energy dispersive X-ray data are compared to a user-generated Mineral Reference Library consisting of known phases and corresponding EDS spectra to classify each particle. MLA is used in this study to provide quantitative assessments of mining-related environmental samples to answer questions regarding mineralogical controls on bioaccessibility, metal leaching/acid rock drainage potential, and anthropogenic influence. Six tailings samples from the New Calumet Mine in Quebec, Canada, were analyzed using MLA. Gastric Pb bioaccessibility testing and total metal content performed on these samples indicated that Pb bioaccessibility in the <250 micron size fraction was not directly correlated with the total Pb concentration. This suggested that there were mineralogical and/or physical controls on bioaccessibility. MLA was used to quantify the relative proportions of cerussite, a highly bioaccessible Pb carbonate, and galena, a lower bioaccessibility Pb sulfide. Liberation and particle size were also analyzed as controls on bioaccessibility. Sample GD-VEG1 (highest bioaccessibility) has the highest ratio of cerussite to galena, the smallest particle size, and the most liberated Pb-bearing particles. The New Calumet tailings were also analyzed using static testing, a suite of laboratory tests used by environmental scientists and mine operators to operationally define acid rock drainage and metal leaching potential. Modal mineralogy obtained from MLA analysis was used to calculate neutralization potential (NP) and acid potential (AP), taking into account the presence of iron carbonate minerals and iron-bearing sulfides other than pyrite. Results are within several units of those obtained by static testing. Two Ni-impacted soil samples collected from the region of Kalgoorlie, Australia were characterized using MLA. Previous studies had focused on bioaccessibility and sequential extraction testing and minor mineralogical work. Preliminary XANES characterization conflicted with mineralogy predicted from sequential extraction and EMPA and MLA were used to quantitatively characterize major Ni-bearing phases and resolve previous discrepancies. / Thesis (Master, Geological Sciences & Geological Engineering) -- Queen's University, 2013-08-24 08:13:18.722

Increased demand for rare earth elements (REEs) for applications in modern technologies has led to an increase in REE exploration. Several deposits are expected to begin mining within a decade, but few studies have examined the possible environmental effects created by these mines. Metal toxicity is thought to be greater in aqueous environments when metals occur as free ions rather than complexes, and the speciation can also impact the treatment technologies utilized to reduce metal concentrations. This research investigates the mineralogical source of REEs and the mechanism of REE mobility in low-temperature waters that have interacted with pilot plant tailings from the Nechalacho deposit, Northwest Territories. The Nechalacho deposit is owned by Avalon Rare Metals Inc. and located approximately 100 km east of Yellowknife. The deposit is hosted within a hydrothermally altered layered nepheline-sodalite syenite in the peralkaline Blatchford Lake complex. The main REE ore minerals are zircon, fergusonite, allanite, monazite, bastnäsite, and synchisite-parasite. Characterization of the tailings using mineral liberation analyzer (MLA) show that the ore minerals are fine grained and well liberated. Bastnäsite and synchisite-parasite are the only potentially soluble ore minerals at low temperature and near-neutral pH. Shake flask experiments were designed to simulate the interaction of tailings with three different leach waters to identify soluble phases and mobile elements. Decanted solutions from the shake flasks were filtered to 0.45µm and 0.01µm. Speciation modelling of the 0.01µm filtrate suggests that carbonate ligands will form the dominant complexes with the REEs, and <2% occur as free metal ions. Higher proportions of LREEs (1-6%) occur as free metal ions than HREEs (<1%) and LREEs occur in higher concentrations (2 to 8 times greater) than the HREE. REEs were found in the colloidal fraction ([REEcolloid] = [REE0.45µm] – [REE0.01µm]). Ionic strength is the dominant control on distribution of REEs between colloidal and dissolved fraction. Colloids captured on filters from ultrafiltration analyzed using scanning electron microscopy and synchrotron microanalysis show REEs are hosted in colloidal rare earth minerals (e.g. zircon) and also show colloidal humic acid, Fe-oxides and Mn-oxides. Speciation modeling shows that REE sorption to these phases is probable. / Thesis (Master, Geological Sciences & Geological Engineering) -- Queen's University, 2014-05-28 11:06:41.351

This thesis aims to answer the following questions: What type of vocabulary is used in the humanities? What does this implicate when it comes to indexing in the humanities? How do humanities scholars seek information and what type of information do they need? What consequences does this have when it comes to the development of humanities databases? How is the MLA International Bibliography organized? How does its indexing system – CIFT – work? How does the MLA International Bibliography correspond with the needs of the humanities scholar? The study shows that the type of vocabulary used in the humanities differs significantly from that used in the sciences. Therefore, information retrieval is often said to be problematic in the humanities when compared to the sciences. This is, however, not completely true. If consideration is taken to the different type of vocabulary used in the humanities, subject access proves to be more straightforward than has been generally recognized. The study also shows that humanities scholars have slightly other information needs than scientists. For example, they use different types of publications in their research. On a whole, the MLA International Bibliography corresponds well with the different needs of humanities scholars. The vocabulary used in its thesaurus is based on the type of vocabulary actually used by them. The database also includes references to various publication types. Even so, the MLA International Bibliography could do with a few improvements in order to enhance its value to the research community. The inclusion of abstracts, more references to internationally published material and improved currency when it comes to time lapse between primary source and online version are areas that needs to be improved. / Uppsatsnivå: D

No description available.

No description available.