[pt] Esta dissertação tem como principal objetivo estudar aplicações da expansão ou decomposição de Karhunen-Loève em dinâmica de estruturas. Esta técnica consiste, basicamente, na obtenção de uma decomposição linear da resposta dinâmica de um sistema qualquer, representado por um campo vetorial estocástico, tendo a importante propriedade de ser ótima, no sentido que dado um certo número de modos, nenhuma outra decomposição linear pode melhor representar esta resposta. Esta capacidade de compressão de informação faz desta decomposição uma poderosa ferramenta para a construção de modelos reduzidos para sistemas mecânicos em geral. Em particular, este trabalho aborda problemas em dinâmica estrutural, onde sua aplicação ainda é bem recente. Inicialmente, são apresentadas as principais hipóteses necessárias à aplicação da expansão de Karhunen-Loève, bem como duas técnicas existentes para sua implementação, com domínios distintos de utilização.É dada especial atenção à relação entre os modos empíricos fornecidos pela expansão e os modos de vibração intrínsecos a sistemas vibratórios lineares, tanto discretos quanto contínuos, exemplificados por uma treliça bidimensional e uma placa retangular. Na mesma linha, são discutidas as vantagens e desvantagens de se usar esta expansão como ferramenta alternativa à análise modal clássica. Como aplicação a sistemas não-lineares, é apresentado o estudo de um sistema de vibroimpacto definido por uma viga em balanço cujo deslocamento transversal é limitado por dois batentes elásticos. Os modos empíricos obtidos através da expansão de Karhunen-Loève são, então, usados na formulação de um modelo de ordem reduzida, através do método de Galerkin, e o desempenho deste novo modelo investigado. / [en] This dissertation has the main objetive of studying applications of the Karhunen-Loève expansion or decomposition in structural dynamics. This technique consists basically in obtaining a linear decomposition of the dynamic response of a general system represented by a stochastic vector field. It has the important property of optimality, meaning that for a given number of modes, no other linear decomposition is able of better representing this response. This information compression capability characterizes this decomposition as powerful tool for the construction of reduced-order models of mechanical systems in general. Particularly, this work deals with structural dyamics problems where its application is still quite new. Initially, the main hypothesis necessary to the application of the Karhunen-Loève expansion are presented, as well as two existing techniques for its implementation that have different domains of use. Special attention is payed to the relation between empirical eigenmodes provided by the expansion and mode shapes intrinsic to linear vibrating systems, both discrete and continuous, exemplified by a bidimensional truss and a rectangular plate. Furthermore, the advantages and disadvantages of using this expansion as an alternative tool for classical modal analysis are discussed. As a nonlinear application, the study of a vibroimpact system consisting of a cantilever beam whose transversal displacement is constrained by two elastic barriers is presented. The empirical eigenmodes provided by the Karhunen-Loève expansion are then used to formulate a reduced-order model through Galerkin projection and the performance of this new model is investigated.

Dans le cadre de la discrétion acoustique des navires militaires, cette thèse contribue à la modélisation de structures amorties par des matériaux viscoélastiques, sous forme de couches contraintes. Afin de pouvoir optimiser et dimensionner la structure et le matériau amortissant, il est souhaitable de disposer d'un outil numérique prédictif et efficace. Dans un premier temps, une stratégie de caractérisation et de modélisation du comportement de matériaux viscoélastiques est proposée. Elle inclue une méthode de recalage de résultats de mesures par DMA basée sur le respect des relations de Kramers-Kronig, permettant ainsi de construire des courbes maîtresses du matériau en accord avec le principe de causalité. Dans un deuxième temps, un code de calcul par éléments finis est développé, puis des essais de vibration sur structures sandwich sont réalisés afin de valider la modélisation par éléments finis de structures munies de matériaux viscoélastiques. Dans le cas d'une fine couche viscoélastique insérée dans une structure maillée par des éléments volumiques, deux éléments d'interface sont développés : ils permettent de tester simplement plusieurs configurations. Enfin, dans un troisième temps, deux catégories de méthodes de réduction adaptées au calcul de la réponse fréquentielle de structures fortement amorties par des matériaux viscoélastiques sont étudiées : les méthodes de projection sur bases modales et la méthode de reconstruction par approximants de Padé. Dans le cadre d'études paramétriques pour l'optimisation des performances acoustiques des traitements viscoélastiques contraints, les avantages des méthodes développées sont mis avant à travers deux cas d'application. / In the context of acoustic discretion of naval ships, this thesis contributes to the modelling of viscoelastically damped structures by means of thin constrained layers. In order to optimize and design the structure and the damping material, a predictive and efficient numerical tool is desirable. Firstly, a characterization and modelling strategy of the behaviour of viscoelastic materials is proposed. A shifting procedure of DMA measurements based on the fulfillment of the Kramers-Kronig relations is developed in order to build master curves of the material which are consistent with the causality principle. Secondly, a finite element code is developed, and vibration experiments are realized in order to validate the finite element modelling of structures with viscoelastic materials. In the case of thin constrained viscoelastic layers applied to a structure meshed using brick elements, two interface finite elements are developed, which facilitate parametric studies. Finally, two families of reduction methods adapted to the calculation of the frequency response of structures highly damped by viscoelastic materials are studied: modal projection methods and Padé approximants reconstruction method. The advantages of the proposed methods, in the frame of parametric studies for the optimization of the acoustic performances of constrained viscoelastic layers, are highlighted through two applications.

La plupart des problèmes d'ingénierie des deux derniers siècles ont été résolus grâce à des modèles structuraux pour poutres, plaques et coques. Les théories classiques, tels que Euler-Bernoulli, Navier et de Saint-Venant pour les poutres, et Kirchhoff-Love et Mindlin-Reissner pour plaques et coques, ont permis de réduire le problème générique 3-D, dans le problème unidimensionnel pour les poutres et deux dimensionnelle pour les coques et les plaques. Théories raffinés d'ordre supérieur ont été proposées au cours du temps, comme les modèles classiques ne consentez pas à d'obtenir une complète domaine des contraintes et des déformations. La Carrera Unified Formulation (UF) a été proposé au cours de la dernière décennie, et permet de développer un grand nombre de théories structurelles avec un nombre variable d'inconnues principales au moyen d'une notation compacte et se référant à des nuclei fondamentales. Cette formulation unifiée permet de dériver carrément des modèles structurels d'ordre supérieur, pour les poutres, plaques et coques. Dans ce cadre, cette thèse vise à étendre la formulation pour l'analyse des structures fonctionnellement gradués (FGM), en introduisant aussi le problème thermo-mécanique, dans le cas des poutres fonctionnellement gradués. Suite à la formulation unifiée, les variables génériques déplacements sont écrits en termes de fonctions de base, qui multiplie les inconnues. Dans la deuxième partie de la thèse, de nouvelles fonctions de bases pour la modélisation des coques, qui représentent une approximation trigonométrique des variables déplacements, sont pris en compte / Most of the engineering problems of the last two centuries have been solved thanks to structural models for both beams, and for plates and shells. Classical theories, such as Euler-Bernoulli, Navier and De Saint-Venant for beams, and Kirchhoff-Love and Mindlin- Reissner for plates and shells, permitted to reduce the generic 3-D problem, in onedimensional one for beams and two-dimensional for shells and plates. Refined higher order theories have been proposed in the course of time, as the classical models do not consent to obtain a complete stress/strain field. Carrera Unified Formulation (UF) has been proposed during the last decade, and allows to develop a large number of structural theories with a variable number of main unknowns by means of a compact notation and referring to few fundamental nuclei. This Unified Formulation allows to derive straightforwardly higher-order structural models, for beams, plates and shells. In this framework, this thesis aims to extend the formulation for the analysis of Functionally Graded structures, introducing also the thermo-mechanical problem, in the case of functionally graded beams. Following the Unified Formulation, the generic displacements variables are written in terms of a base functions, which multiplies the unknowns. In the second part of the thesis, new bases functions for shells modelling, accounting for trigonometric approximation of the displacements variables, are considered.

L’hydrogène liquide est un ergol utilisé en complément de l’oxygène liquide pour la propulsion de nombreux lanceurs en particulier ceux de la famille Ariane. Cependant, sa dangerosité interdit la réalisation d’essais, en particulier vibratoires, sur des réservoirs remplis. Cette thèse explore une piste d’étude permettant de réaliser ces essais vibratoires sur le réservoir rempli d’un matériau de substitution : un ensemble de billes pré-contraintes. L’objectif est d’obtenir un comportement modal similaire en termes de modes et de fréquences propres à celui du réservoir rempli d’hydrogène liquide pour l’étude des premiers modes. Pour répondre à cet objectif, cette étude est développée en deux parties. Dans la première partie, une approche analytique basée sur une méthode par équivalences fréquentielles est détaillée. Après avoir présenté les grandes lignes de la méthodologie utilisée et l’ensemble des modèles développés, la méthodologie est appliquée au cas étudié expérimentalement de manière à mettre en évidence l’influence des différents paramètres et de proposer une première méthode pour choisir un jeu de billes adapté. La seconde partie, traite principalement des aspects expérimentaux et numériques. Après avoir détaillé la caractérisation des billes utilisées, le montage expérimental conçu et réalisé pour effectuer des essais vibratoires sur un réservoir rempli de billes pré-contraintes est présenté. Les différents résultats obtenus avec ce montage sont étudiés au regard de l’approche analytique, mais aussi de modèles numériques utilisant des éléments-discrets et des éléments-finis. / Liquid hydrogen is a propellant alternatively used with liquid oxygen for the propulsion of many launchers, especially those of the Ariane family. However, its dangerousness prohibits vibration tests on filled tank. The aim of this PHD is to explore the possibility to carry out such vibration tests by filling these tanks with a substitute material : a set of pre-stressed balls. As further argued and developed in the report, the objective is to obtain a modal behavior similar in term of mode shapes and natural frequencies to those of the tank filled with liquid hydrogen for the first modes. In the first part, an analytical approach based on a method using frequency equivalences is detailed. After presenting the outlines of the methodology used and all the models developed, the methodology is applied to the experimentally studied case in order to highlight the influence of the different parameters as well as then to propose a first method to choose a set of well adapted balls. The second part deals mainly with experimental and numerical aspects. Firstly, the balls used in the thesis are characterized. Then, the experimental set-up designed and realized to carry out vibration tests on a tank filled with pre-stressed balls is presented. The different results obtained are compared with both analytical results and numerical based on discrete-elements and finite-elements results.

Este trabalho de pesquisa apresenta como objetivo principal o desenvolvimento de investigação experimental dinâmica sobre estrutura real de uma passarela tubular mista aço-concreto. O sistema estrutural objeto deste trabalho corresponde a uma passarela composta por três vãos (32,5m, 17,5m e 20,0m, respectivamente) e dois balanços (7,50m e 5,0m, respectivamente), com comprimento total de 82,5m. A passarela com estrutura contínua de aço com as ligações soldadas se apoia em quatro pórticos também de aço. Estruturalmente está constituída por duas treliças planas que se interligam através de contraventamentos horizontais fixados na corda superior e inferior da treliça e lajes de concreto, formando um sistema misto com interação completa. A estrutura está submetida correntemente à travessia de pedestres e ciclistas. Testes experimentais foram realizados sobre o sistema estrutural e confrontados com resultados numéricos. Para a modelagem numérica do sistema são empregadas técnicas usuais de discretização, via método dos elementos finitos (MEF), por meio do programa ANSYS. Os resultados experimentais são analisados de acordo com a metodologia desenvolvida, sendo realizada análise modal experimental para a determinação das propriedades dinâmicas: freqüências, modos e taxa de amortecimento, enquanto que os resultados da estrutura, em termos de aceleração de pico, são comparados com os valores limites propostos por diversos autores, normas e recomendações de projeto, para uma avaliação do desempenho da estrutura em relação a vibração quando solicitada pelo caminhar dos pedestres no que diz respeito a critério para conforto humano. / This research has as main objective the development of a dynamical experimental investigation of a real structure a tubular composite steel-concrete footbridge. The structural system of this study corresponds to a footbridge composed by three spans (32,5m, 17,5m and 20,0m, respectively) and two overhangs (7,50m and 5,0m, respectively), spanning 82,5m. The investigated structural model is composed by a continuous tubular steel structure with welded connections supported by four double file steel columns. It is structurally composed of two plane trusses are intertwined by horizontal bracing set in upper and lower chord of the truss and slabs of concrete, forming effective composite with complete interaction. This structure is currently submitted to pedestrians and cyclists crossing. Experimental tests were carried out on the structural system and with the numerical results. For the numerical modeling, discretization techniques via finite element method were applied, based on the ANSYS program. The experimental results were analyzed according to the developed methodology, and a modal analysis was implemented to determine the dynamical properties: frequencies, mode shapes and modal damping ratio, while the structure results in terms of peak acceleration, was obtained and compared to the limit values proposed by several authors and design recommendations, for the structure performance by pedestrian walking regarding the acceptance criteria for human comfort.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The need for transmission lines expansion (TL) is evident in the face of growing electrical energy demand in Brazil as well as the great distances between generation and consumption centers. It is known that numerous failures can interrupt the energy transmission and the towers collapse is among the main reasons, causing huge losses to both electrical energy companies and final users. Thus, it is crucial to understand the mechanical behavior of these structures, considering the different actions that they can act so that the energy transmission can take place in a safe, efficient and economical way. In this context, this paper deals with the static and dynamic response evaluation of guyed lattice metallic towers of TLs submitted to broken conductor and broken lightning-rod cable. For this purpose, numerical models of isolated tower and completed stretch of TL were developed, including all components, towers, insulator chains, lightning-rod cables, conductor cables and prestressed stay cables. The models are subjected to static analysis through "equivalent static loads" application coming from the broken cable and dynamic analysis, in the time domain, using the method of direct integration of equations of motion explicitly, with central finite differences. The static and dynamic responses are given in terms of nodal displacements at the top and normal stresses in the tower bars. Finally, the results of the dynamic analysis in the time domain are compared with those determined by static analysis, employed in the usual design practice, that is, the peak and final values (after the structure stops vibrating) are compared with the static response values in order to verify the validity of the model used in the design practice. / A necessidade da expansão de linhas de transmissão (LTs) fica evidente diante da crescente demanda por energia elétrica no Brasil, além das grandes distâncias entre a geração e os centros consumidores. Sabe-se que inúmeras falhas podem interromper a transmissão da energia, e o colapso de torres está entre as principais, causando enormes prejuízos, tanto as companhias de energia elétrica quanto aos consumidores finais. Dessa forma, torna-se fundamental o conhecimento do comportamento mecânico destas estruturas, frente às diferentes ações que podem atuar, para que o transporte de energia ocorra de maneira segura, eficiente e econômica. Neste contexto, o presente trabalho trata da avaliação da resposta estática e dinâmica de torres metálicas treliçadas estaiadas de LTs submetidas à ruptura de cabo condutor e de cabo para-raios. Para isso, foram desenvolvidos modelos numéricos de torre isolada e de um trecho completo de LT, incluindo todos componentes, torres, cadeias de isoladores, cabos para-raios, cabos condutores e cabos de estais pré-tensionados. Os modelos são submetidos a análises estáticas, através da aplicação de cargas estáticas equivalentes oriundas da ruptura de cabo, e análises dinâmicas, no domínio do tempo, empregando o método de integração direta das equações do movimento, de forma explícita, com diferenças finitas centrais. As respostas estática e dinâmica são dadas em termos de deslocamentos nodais no topo e esforços normais nas barras da torre. Por fim, os resultados da análise dinâmica no domínio do tempo são comparados com os determinados por meio da análise estática, empregada na prática usual de projeto, ou seja, são comparados os valores de pico e os valores finais (após a estrutura parar de vibrar) com os valores da resposta estática, a fim de verificar a validade do modelo empregado na prática de projeto.

Orientador: João Antonio Pereira / Resumo: O objetivo específico deste trabalho é estender as capacidades da técnica de rastreamento de pontos em 3 dimensões (three-dimensional point tracking – 3DPT) para identificar as características dinâmicas de estruturas grandes e complexas, tais como pás de turbina eólica. Um sistema multi-camera (composto de múltiplos sistemas de estéreo visão calibrados independentemente) é desenvolvido para obter alta resolução espacial de pontos discretos a partir de medidas de deslocamento sobre grandes áreas. Uma proposta de técnica de costura é apresentada e empregada para executar o alinhamento de duas nuvens de pontos, obtidas com a técnica 3DPT, de uma estrutura sob excitação dinâmica. Três diferentes algoritmos de registro de nuvens de pontos são propostos para executar a junção das nuvens de pontos de cada sistema estéreo, análise de componentes principais (Principal Component Analysis - PCA), decomposição de valores singulares (Singular value Decomposition - SVD) e ponto mais próximo iterativo (Iterative Closest Point - ICP). Além disso, análise modal operacional em conjunto com o sistema de medição multi-camera e as técnicas de registro de nuvens de pontos são usadas para determinar a viabilidade de usar medidas ópticas (e.g. three-dimensional point tracking – 3DPT) para estimar os parâmetros modais de uma pá de gerador eólico comparando seus resultados com técnicas de medição mais convencionais. / Abstract: The specific objective of this research is to extend the capabilities of three-dimensional (3D) Point Tracking (PT) to identify the dynamic characteristics of large and complex structures, such as utility-scale wind turbine blades. A multi-camera system (composed of multiple independently calibrated stereovision systems) is developed to obtain high spatial resolution of discrete points from displacement measurement over very large areas. A proposal of stitching techniques is presented and employed to perform the alignment of two point clouds, obtained with 3DPT measurement, of a structure under dynamic excitation. The point cloud registration techniques are exploited as a technique for dynamic measuring (displacement) of large structures with high spatial resolution of the model. Three different image registration algorithms are proposed to perform the junction of the points clouds of each stereo system, Principal Component Analysis (PCA), Singular value Decomposition (SVD) and Iterative Closest Point (ICP). Furthermore, operational modal analysis in conjunction with the multi-camera measurement system and registration techniques are used to determine the feasibility of using optical measurements (e.g. three-dimensional point tracking (3DPT)) to estimate the modal parameters of a utility-scale wind turbine blade by comparing with traditional techniques. / Doutor

Submitted by OSCAR SCUSSEL null (oscar.scussel@gmail.com) on 2017-04-29T13:57:37Z No. of bitstreams: 1 PhDThesisScussel.pdf: 4308679 bytes, checksum: 08a1260ebbd5cc5320910fff695b1037 (MD5) / Approved for entry into archive by Luiz Galeffi (luizgaleffi@gmail.com) on 2017-05-03T16:39:39Z (GMT) No. of bitstreams: 1 scussel_o_dr_ilha.pdf: 4308679 bytes, checksum: 08a1260ebbd5cc5320910fff695b1037 (MD5) / Made available in DSpace on 2017-05-03T16:39:39Z (GMT). No. of bitstreams: 1 scussel_o_dr_ilha.pdf: 4308679 bytes, checksum: 08a1260ebbd5cc5320910fff695b1037 (MD5) Previous issue date: 2017-03-27 / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Muitas aplicações da engenharia envolvem estruturas essencialmente não-lineares onde várias técnicas têm sido recentemente estudadas e investigadas por muitos pesquisadores. Dentre as várias abordagems, as que usam séries de Volterra têm apresentado propriedades úteis para fornecer um melhor entendimento para identificação e análise. Neste contexto, a presente tese propõem novas contribuições em como usar as séries de Volterra para caracterização, identificação e análise dinâmica de sistemas não-lineares usando sinais de entrada e saída e sinais somente de saída. Inicialmente, apresenta-se uma metodologia para análise de sistemas mecânicos não-lineares através das funções de resposta em frequência de alta-ordem (HOFRFs) e o conceito de HOFRFs estendidas com dados apenas de saída é introduzido e descrito em detalhes. Após isso, uma abordagem para identificação de sistemas não-lineares com base nas séries de Volterra através da expansão na base ortonormal de Kautz é proposta. Essa técnica permite identificar os seus núcleos mais facilmente e permite separar as contribuições dos termos lineares e não-lineares usando somente sinais de saída. Além disso, uma metodologia para análise modal de sistemas fracamente não-lineares sujeito a excitações com vários níveis de amplitude é também apresentada. A contribuição desse novo método reside no fato de que as HOFRFs são simplesmente estimadas como função das FRFs lineares. Basicamente, essa metodologia estende o conceito de métodos convencionais de analise modal experimental para caracterizar e tratar efeitos não-lineares. Os resultados via exemplos numéricos e experimentais apresentados ao longo da tese mostram as contribuições, benefícios e eficácia da proposta. / Most recent engineering applications involve structures essentially nonlinear where several techniques have been recently studied and investigated by many researchers. Among them, the methods based on Volterra series expansion have presented powerful properties to provide a better understanding for identification and analysis. In this context, the present thesis proposes new contributions in how to use Volterra series for characterization, identification and dynamical analysis of nonlinear systems based on input and output signals and output-only signals. Initially, a methodology for analysis of nonlinear mechanical systems through higher-order frequency response functions (HOFRFs) is presented and the concept of extended HOFRFs based on output-only is introduced and described in detail. Afterwards, an approach for identification of nonlinear systems based on Volterra series through the expansion onto orthonormal Kautz basis is proposed. This technique allows to identify the Volterra kernels easily and enable to split the contribution of the linear and nonlinear terms using input-output as well as output-only signals. Furthermore, a methodology for modal analysis of weakly nonlinear systems under multilevel excitation is also proposed. The contribution of this new approach lies in the fact that HOFRFs are simply computed as functions of the linear FRFs. Basically, it extends the conventional experimental modal analysis methods in order to characterize and treat nonlinear effects. The results based on numerical and experimental examples presented along the thesis show the contributions, benefits and effectiveness of the proposal. / FAPESP: 2012/09135-3 / CNPq: 47058/2012-0 / CNPq: 203610/2014-8

Les capacités installées d’énergie éolienne continuent à croître rapidement et prennent une place de plus en plus significative dans le monde. Au fur et à mesure, les études menées sur la conception, la sureté de fonctionnement et la supervision de la chaîne éolienne ont pris progressivement de l’importance. Deux axes de recherche ont été privilégiés dans cette thèse. Le premier concerne la continuité de service d'une éolienne connectée au réseau en présence de défaut de court-circuit entre spires dans une phase du stator de la génératrice asynchrone à cage d'écureuil. L'analyse du défaut ainsi que son impact sur le système éolien et notamment sur la qualité de la puissance produite souligne l'intérêt de développement d'un algorithme de détection et d'isolation rapide, dédié par la suite à la reconfiguration de la commande. Ainsi, une commande tolérante au défaut (CTD) a été conçue de manière à éviter l'arrêt de la production, compenser l'impact de défaut et garder des performances acceptables de la qualité d'énergie produite. Le travail effectué s'est articulé sur les observateurs à mode glissant (OMG), communément connus comme outil puissant pour la supervision et la commande à la fois. Le deuxième axe porte sur la sécurité structurale et la stabilité du système éolien sous contraintes vibratoires. Les travaux se répartissent en deux parties complémentaires : L'établissement d'un modèle numérique tridimensionnel (3-D) sous un logiciel d’analyse par éléments finis (ANSYS) et la réalisation des essais vibratoires sous différentes excitations au sein d'une plateforme vibratoire (TREVISE). Dans ce cadre, un modèle numérique (3-D) d'une éolienne à axe horizontal couplée à un mât et une fondation adéquats a été développé en utilisant la méthode de volumes finis (FVM) afin d'appréhender son comportement vibratoire. Les essais vibratoires expérimentaux valident le modèle numérique et permettent l’identification de la réponse dynamique de la structure d'une manière fine. De plus, nous avons élaboré un modèle expérimental de la tenue de l’éolienne aux contraintes vibratoires de formes aléatoire, sinusoïdale et impulsionnelle. / The wind energy capacity carries on growing quickly and taking an increasingly significant place in the world. Progressively, research studies dealing with designing and supervising wind turbines have become more important. Two areas of research were developed in this thesis. The first one concerns the continuity of service of a wind turbine connected to the grid while an inter-turn short-circuit fault is present in the stator phase of the induction squirrel cage generator. The analysis of the fault as well as its impact on the wind turbine system and mainly on the quality of the produced power highlights the interest of development of a fast detection and isolation algorithm, dedicated to the reconfiguration of the control law. Hence, a fault tolerant control scheme has been established in order to avoid stopping production, compensate the fault impact and maintain acceptable performances of the quality of the produced energy. The carried out work was based on sliding mode observers, commonly known as robust tools for monitoring and controlling at the same time. The second axis concerns the structural modeling and stability checking of the wind system under vibratory stresses. The work is divided into two complementary parts: The establishment of a three-dimensional (3-D) numerical model using a finite element analysis software (ANSYS) and the realization of vibratory tests under different excitations within the platform (TREVISE). In this framework, a numerical (3-D) model of a horizontal axis wind turbine coupled to a suitable tower and foundation was developed basing on the finite volume method (FVM) in order to analyze its vibratory behavior. The experimental vibratory tests validate the numerical model and allow the identification of the dynamic response of the structure in a precise way. In addition, we have developed an experimental model of the behavior of the wind turbine under vibratory stresses of random, sinusoidal and impulse shapes.

Este trabalho de pesquisa apresenta como objetivo principal o desenvolvimento de investigação experimental dinâmica sobre estrutura real de uma passarela tubular mista aço-concreto. O sistema estrutural objeto deste trabalho corresponde a uma passarela composta por três vãos (32,5m, 17,5m e 20,0m, respectivamente) e dois balanços (7,50m e 5,0m, respectivamente), com comprimento total de 82,5m. A passarela com estrutura contínua de aço com as ligações soldadas se apoia em quatro pórticos também de aço. Estruturalmente está constituída por duas treliças planas que se interligam através de contraventamentos horizontais fixados na corda superior e inferior da treliça e lajes de concreto, formando um sistema misto com interação completa. A estrutura está submetida correntemente à travessia de pedestres e ciclistas. Testes experimentais foram realizados sobre o sistema estrutural e confrontados com resultados numéricos. Para a modelagem numérica do sistema são empregadas técnicas usuais de discretização, via método dos elementos finitos (MEF), por meio do programa ANSYS. Os resultados experimentais são analisados de acordo com a metodologia desenvolvida, sendo realizada análise modal experimental para a determinação das propriedades dinâmicas: freqüências, modos e taxa de amortecimento, enquanto que os resultados da estrutura, em termos de aceleração de pico, são comparados com os valores limites propostos por diversos autores, normas e recomendações de projeto, para uma avaliação do desempenho da estrutura em relação a vibração quando solicitada pelo caminhar dos pedestres no que diz respeito a critério para conforto humano. / This research has as main objective the development of a dynamical experimental investigation of a real structure a tubular composite steel-concrete footbridge. The structural system of this study corresponds to a footbridge composed by three spans (32,5m, 17,5m and 20,0m, respectively) and two overhangs (7,50m and 5,0m, respectively), spanning 82,5m. The investigated structural model is composed by a continuous tubular steel structure with welded connections supported by four double file steel columns. It is structurally composed of two plane trusses are intertwined by horizontal bracing set in upper and lower chord of the truss and slabs of concrete, forming effective composite with complete interaction. This structure is currently submitted to pedestrians and cyclists crossing. Experimental tests were carried out on the structural system and with the numerical results. For the numerical modeling, discretization techniques via finite element method were applied, based on the ANSYS program. The experimental results were analyzed according to the developed methodology, and a modal analysis was implemented to determine the dynamical properties: frequencies, mode shapes and modal damping ratio, while the structure results in terms of peak acceleration, was obtained and compared to the limit values proposed by several authors and design recommendations, for the structure performance by pedestrian walking regarding the acceptance criteria for human comfort.