Silné prostorové omezení materiálů způsobuje jejich nové vlastnosti, které mohou najit uplatnění v mnoha vědeckých i technických odvětvích. Snaha zmenšit velikosti součástek, zvětšit hustotu zápisu a zefektivnit procesy je současným trendem elektronického průmyslu. V této práci je studován vliv prostorového omezení na vlastnosti metamagnetického železo-rhodia (FeRh) během fázové přeměny. FeRh je materiál vykazující fázovou přeměnu prvního druhu mezi antiferomagnetickou a feromagnetickou fází. Metodou mikroskopie magnetických sil v magnetickém poli kolmém na rovinu vzorku je zobrazeni a analyzována struktura fázových domén behem fázové přeměny. Kvantitativní analýza naměřených dat je provedena užitím výškové korelační funkce a její výsledky jsou porovnány pro různé velikosti struktur a tloušťky tenkých vrstev.

Umělé spinové systémy jsou vhodným nástrojem pro zkoumání a ovlivňování neobvyklých exotických nízko-energiových stavů přímo v reálném prostoru. Experimentální realizace těchto systémů jsou založeny na výrobě vzájemně interagujících nano-magnetů uspořádaných do požadované geometrie. Prvním a asi i nejvíce studovaným umělým systémem je prostá čtvercová mřížka. V této práci se zabýváme modifikováním této čtvercové geometrie, které umožní zachycení různých magnetických fází založených na modelech ledu. Výsledky ukazují, že vhodným nastaveném této modifikace lze realizovat různé magnetické fáze, včetně neuspořádané spinové kapalné fáze s uvězněnými magnetickými kvazičásticemi (magnetickými monopóly).

Tato diplomová práce je zaměřena na analýzu chování magnetopiezoelastického kmitajícího nosníku. V teoretické části jsou odvozeny diskretizované parametry, které popisují reálnou soustavu jako model s jedním stupněm volnosti. Tento model je následně použit pro kvalitativní i kvantitativní analýzu chování tohoto harvesteru. Frekvenční odezva harmonicky buzeného systému je zkoumána v dvouparametrické nebo tříparametrické analýze v závislosti na amplitudě buzení, elektrické zátěži a vzdálenosti mezi magnety. Posledně zmíněný parametr je v práci tím hlavním, proto je vliv vzdálenosti magnetů zkoumán také s pomocí bifurkačních diagramů. Tyto diagramy byly navíc použity k vytvoření oscilační "mapy", která pro každé zatěžovací podmínky ukazuje, jakou vzdálenost magnetů je třeba nastavit, aby bylo generováno nejvíce energie. Práce je doplněna o ukázky několika jevů, které mohou značně ovlivnit chování systému, pokud se nejdená o čistě harmonické buzení.

This dissertation presents a substantial contribution to a new field of material science, the investigation of the magnetic properties of 3D curved surfaces, achieved by using a self-assembled geometrical transformation of an initially planar membrane. Essential magnetic properties of thin films can be modified by the process of transforming them from a 2D planar film to a 3D curved surface. By investigating and controlling the reasons that influence the properties, it is possible to improve the functionality of existing devices in addition to laying the foundation for the future development of microelectronic devices based on curved magnetic structures. To accomplish this, it is necessary both to fabricate high-quality 3D curved objects and to establish reliable characterization methods based on commonly available technology. The primary objective of this dissertation is to develop techniques for characterizing the static and dynamic magnetic properties of self-assembled rolled 3D geometries. The second objective is to examine the origin of shape-, size- and strain/curvature-induced effects. The developed approach based on anisotropic magnetoresistance (AMR) measurement can quantitatively define the rolling-induced static magnetic changes, namely the induced magnetoelastic anisotropy, thus eliminating the need for microscopic imaging to characterize the structures. The interpretation of the AMR signal obtained on curved stripes is enabled by simultaneous visualization of the domain patterns and micromagnetic simulations. The developed approach is used to examine the effect of sign and magnitude of curvature on the induced anisotropies by altering the rolling direction and diameter of the 'Swiss-roll'. Furthermore, a time-averaged imaging technique based on conventional microscopies (magnetic force microscopy and Kerr microscopy) offers a novel strategy for investigating nanoscale periodic domain wall oscillations and hence dynamic magnetic characteristics of flat and curved structures. This method exploits the benefit of a position-dependent dwell time of periodically oscillating DWs and can determine the trajectory and amplitude of DW oscillation with sub-100 nm resolution. The uniqueness of this technique resides in the ease of the imaging procedure, unlike other DW dynamics imaging methods. The combined understanding of rolling-induced anisotropy and imaging DW oscillation is utilized to examine the dependence of DW dynamics on external stimuli and the structure's physical properties, such as lateral size, film thickness, and curvature-induced anisotropy. The presented methods and fundamental studies help to comprehend the rapidly expanding field of 3-dimensional nanomagnetism and advance high-performance magneto-electronic devices based on self-assembly rolling.

No description available.

No description available.

Nous avons réalisé des couches minces de Co sur un substrat semi-conducteur (Si(111)) par voix électrochimique, en mode potentiostatique et en mode galvanostatique, et étudié leurs propriétés topographiques (AFM, MEB) et magnétique (RMN, effet Kerr, SQUID), afin de relier ces propriétés aux modes de croissance et aux conditions de dépôt à priori identiques conduisent à des morphologies et donc des propriétés magnétiques très différentes. Nous avons développé une approche rigoureuse avec un contrôle systématique de la qualité du substrat de départ pour clarifier les modes de nucléation et de croissance en fonction du potentiel appliqué en chronoampérométrie. Une transition d’un mode de nucléation instantanée vers un mode de nucléation progressive en fonction du potentiel appliqué est mise en évidence. La modélisation à l’aide du modèle de Scharifker-Hills des modes de nucléation et de croissance est cohérente avec les images de topographie AFM. La croissance est tridimensionnelle du type Volmer-Weber et l’aimantation est orientée dans le plan. Par RMN et également X-Ray Photoemission Spectroscopy (XPS), nous montrons qu’une couche d’hydroxyde de cobalt magnétiquement morte se forme à l’interface avec le Si. En mode galvanostatique, des grains avec des facettes parfaitement cristallisés présentent des domaines magnétiques localisés dans la plupart des ilots. Nous avons également effectué une étude très critique des techniques de dépôt/arrachage employées dans la littérature montrant que celle-ci sont inadaptées aux substrats semi-conducteur, un dépôt subsistant sur la surface quel que soit la technique d’arrachage choisie. / We have deposited thin layers of Co on a semiconductor substrate Si(111), by electrochemical method, in potentiostatic and galvanostatic mode, and we have studied their topographic properties (AFM, MEB) and magnetic (RMN, effet Kerr, SQUID). Thanks to these different techniques, we could relate these properties to the growth modes and to the a priori identical deposition conditions, which lead to different morphologies and therefore different magnetic properties. We have developed a rigorous approach with a systematic control of the quality of the substrate in order to clarify the nucleation and growth modes as a function of the potential applied in chronoamperometry. A transition from an instantaneous nucleation mode to a progressive nucleation mode as a function of the applied potential is highlighted. Modeling with Scharifker-Hills model of nucleation and growth modes is consistent with AFM topography images. The growth is three-dimensional of a Volmer-Weber type and the magnetization is oriented in the plane. By NMR and also X-Ray Photoemission Spectroscopy (XPS), we could show that a layer of magnetically dead cobalt hydroxide layer forms at the interface with Si. In galvanostatic mode, grains with perfectly crystallized facets have magnetic domains located in most of the islands. We have also carried out a very critical study of the deposition / tearing techniques used in the literature showing that they are unsuitable for semiconductor substrates, a deposit remaining on the surface whatever the tearing technique chosen.

Fundação de Amparo a Pesquisa do Estado de Minas Gerais / In this work, Zn1-xAxTe (A = Mn, Co) diluted magnetic semiconductors (DMS) nanocrystal (NCs) were successfully grown in the P2O5 ZnO Al2O3 BaO PbO glass system synthesized by the method of Fusion-Nucleation, after subjecting to appropriate thermal annealing. Various experimental techniques were used in this study in order to get a comprehensive understanding of the optical, morphological, structural and magnetic properties these NCs. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) images revealed the size of both of Zn1-xMnxTe and Zn1-xCoxTe NCs. From the vibrating sample magnetometer (VSM) technique, there was growth behavior of magnetization and magnetic susceptibility as a function of the Mn concentration in the samples containing Zn1-xMnxTe NCs. At lower Mn concentrations, the sp electrons of ZnTe host semiconductor interact with the d electrons of Mn2+ ions, resulting in the sp-d exchange interaction, which causes a small increase in susceptibility. At higher Mn concentrations, the d-d exchange interaction between Mn atoms dominates over the sp-d exchange interaction, resulting in an abrupt increase in susceptibility. The EPR spectra, in addition to prove the results exhibited the well-known sextet hyperfine lines of Mn2+ ions, since samples with low Mn concentrations revealed the presence of Mn2+ ions within and near the surface of the ZnTe NCs. From the optical absorption spectra (OA) and photoluminescence (PL), analyzed on the basis of crystal field theory (CFT) as well as of the diffraction X-ray (XRD), Raman scattering (RS) and electron microscopy transmission (TEM) techniques, the substitutional incorporation of Mn2+ ions was confirmed up to its solubility limit (x = 0.100) ZnTe NCs. Above this concentration, can observe the formation of manganese oxide NCs such as MnO and MnO2, since the nucleation rate for the formation of these NCs is greater than that of Zn1-xMnxTe NCs, at high concentrations. Furthermore, from the PL spectra, it was found that it is possible to tune the emission of energy related to transition 4T1(4G) → 6A1(6S) of Mn2+ ions, of the spectral orange region to the near infrared, depending on Mn concentration. This is possible due to the variation of the local crystal field, where these ions are inserted. From the OA spectra, analyzed on the basis of CFT, it showed that Co2+ ions are substitutionally incorporated in tetrahedral sites of ZnTe NCs, due to its characteristics transitions in visible and near infrared spectral region. This evidence has been enhanced from MFM images, since NCs doped with magnetic ions, magnetically respond when induced by the magnetization of the probe. / Neste trabalho, nanocristais semicondutores magnéticos diluídos (SMD) de Zn1-xAxTe (A = Mn; Co) foram crescidos com sucesso no sistema vítreo P2O5 ZnO Al2O3 BaO PbO, sintetizado pelo método de Fusão-Nucleação, após submetê-lo a tratamento térmico apropriado. Várias técnicas experimentais foram utilizadas neste estudo a fim de obter um entendimento compreensivo das propriedades ópticas, morfológicas, estruturais e magnéticas desses NCs. Imagens de microscopia eletrônica de transmissão (MET) e microscopia de força atômica (MFA) revelaram o tamanho tanto de NCs de Zn1-xMnxTe quanto de Zn1-xCoxTe. A partir da técnica de magnetometria de amostra vibrante (MAV), verificou-se o crescimento da magnetização e o comportamento da susceptibilidade magnética, em função da concentração de Mn, em amostras contendo NCs de Zn1-xMnxTe. Em baixas concentrações de Mn, os elétrons sp do semicondutor hospedeiro ZnTe, interagem com os elétrons d dos íons Mn2+, resultando na interação de troca sp-d, que provoca um pequeno aumento na susceptibilidade magnética. Já, em concentrações mais elevadas de Mn, a interação de troca d-d entre átomos de Mn domina a interação de troca sp-d, o que resulta em um aumento abrupto da susceptibilidade. Os espectros RPE, além de comprovar esses resultados, exibiram o bem conhecido sexteto de linhas hiperfinas de íons Mn2+, uma vez que amostras com baixas concentrações de Mn revelaram a presença de íons Mn2+ no interior e próximos à superfície dos NCs de ZnTe. A partir dos espectros de absorção óptica (AO) e fotoluminescência (FL), analisados com base na teoria do campo cristalino (TCC), bem como das técnicas de difração de raios-X (DRX), espalhamento Raman (ER) e microscopia eletrônica de transmissão (MET), confirmou-se a incorporação substitucional de íons Mn2+ até seu limite de solubilidade nominal (x = 0,100) em NCs de ZnTe. Acima dessa concentração, observa-se a formação de NCs de óxido de manganês, tais como MnO e MnO2, uma vez que a taxa de nucleação para a formação desses NCs é maior que a de NCs de Zn1-xMnxTe, em altas concentrações. Além disso, a partir dos espectros FL, verificou-se que é possível sintonizar a energia de emissão relacionada à transição 4T1(4G) → 6A1(6S) de íons Mn2+, da região espectral laranja ao infravermelho próximo, em função da concentração de Mn. Isso é possível devido à variação do campo cristalino local, onde esses íons estão inseridos. A partir dos espectros AO, analisados com base na TCC, evidenciou-se que íons Co2+ são incorporados substitucionalmente em sítios tetraédricos de NCs de ZnTe, devido às suas transições características na região espectral do visível e infravermelho próximo. Essa evidência foi reforçada a partir de imagens de MFM, uma vez que os NCs, dopados com íons magnéticos, respondem magneticamente quando induzidos pela magnetização da sonda. / Doutor em Física

Zur Aufklärung der lokalen Magnetisierungs- und magnetischen Streufeldstruktur in ferromagnetischen und supraleitenden Materialien wurden magnetkraftmikroskopische (Magnetkraftmikroskopie-MFM) Untersuchungen durchgeführt und quantitativ ausgewertet. Für eine solch quantitative Auswertung muss der Einfluß der verwendeten MFM-Spitzen auf das MFM-Bild bestimmt und in geeigneter Weise subtrahiert werden. Hierzu wurden Spitzenkalibrierungsroutinen und ein Verfahren zur Entfaltung der gemessenen MFM-Daten implementiert, das auf der Wiener Dekonvolution basiert. Mit Hilfe dieser Prozedur können sowohl die räumliche Ausdehnung als auch die Größe der Streufelder direkt aus gemessenen MFM-Bildern bestimmt werden. Gezeigt wurde diese Anwendung für die Durchmesserbestimmung von Blasendomänen in einer (Co/Pd)-Multilage und für die Bestimmung der temperaturabhängigen magnetischen Eindringtiefe in einem supraleitendem BaFe2(As0.24P0.76)2 Einkristall. Desweiteren konnte durch die Kombination von mikromagnetischen Rechnungen und der quantitativen MFM-Datenanalyse die Existenz einer dreidimensionalen Vortex-Struktur am Ende von Co48Fe52-Nanodrähten nachgewiesen werden. Damit ist es gelungen die Tiefensensitivität der Magnetkraftmikroskopie erfolgreich in die Rekonstruktion der vermessenen Magnetisierungsstruktur einzubeziehen.

Zur Aufklärung der lokalen Magnetisierungs- und magnetischen Streufeldstruktur in ferromagnetischen und supraleitenden Materialien wurden magnetkraftmikroskopische (Magnetkraftmikroskopie-MFM) Untersuchungen durchgeführt und quantitativ ausgewertet. Für eine solch quantitative Auswertung muss der Einfluß der verwendeten MFM-Spitzen auf das MFM-Bild bestimmt und in geeigneter Weise subtrahiert werden. Hierzu wurden Spitzenkalibrierungsroutinen und ein Verfahren zur Entfaltung der gemessenen MFM-Daten implementiert, das auf der Wiener Dekonvolution basiert. Mit Hilfe dieser Prozedur können sowohl die räumliche Ausdehnung als auch die Größe der Streufelder direkt aus gemessenen MFM-Bildern bestimmt werden. Gezeigt wurde diese Anwendung für die Durchmesserbestimmung von Blasendomänen in einer (Co/Pd)-Multilage und für die Bestimmung der temperaturabhängigen magnetischen Eindringtiefe in einem supraleitendem BaFe2(As0.24P0.76)2 Einkristall. Desweiteren konnte durch die Kombination von mikromagnetischen Rechnungen und der quantitativen MFM-Datenanalyse die Existenz einer dreidimensionalen Vortex-Struktur am Ende von Co48Fe52-Nanodrähten nachgewiesen werden. Damit ist es gelungen die Tiefensensitivität der Magnetkraftmikroskopie erfolgreich in die Rekonstruktion der vermessenen Magnetisierungsstruktur einzubeziehen.:Introduction 6 1 Contrast formation in Magnetic Force Microscopy (MFM) 9 1.1 Type of interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1.1 Relevant interaction forces . . . . . . . . . . . . . . . . . . . . . . . 9 1.1.2 Magnetic interaction mechanisms . . . . . . . . . . . . . . . . . . . 11 1.2 Basic magnetostatics of the tip-sample system . . . . . . . . . . . . . . . . 12 1.2.1 General magnetostatic expressions . . . . . . . . . . . . . . . . . . . 12 1.2.2 Description of the tip sample system . . . . . . . . . . . . . . . . . 14 1.2.3 Magnetostatics in Fourier space . . . . . . . . . . . . . . . . . . . . 15 2 Instrumentation 20 2.1 Scanning Force Microscopy (SFM) . . . . . . . . . . . . . . . . . . . . . . . 20 2.1.1 Measurement principle and operation modes . . . . . . . . . . . . . 20 2.1.2 Dynamic mode SFM . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.2 Lift mode MFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2.3 Non-contact MFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 2.4 Vibrating Sample Magnetometry . . . . . . . . . . . . . . . . . . . . . . . 26 3 Quantitative Magnetic Force Microscopy 28 3.1 The challenge of MFM image inversion . . . . . . . . . . . . . . . . . . . . 28 3.1.1 Description of the problem and state of the art . . . . . . . . . . . 28 3.1.2 The point probe approximations . . . . . . . . . . . . . . . . . . . . 31 3.1.3 The transfer function approach . . . . . . . . . . . . . . . . . . . . 33 3.2 Tip calibration: Adapted Wiener deconvolution . . . . . . . . . . . . . . . 39 3.2.1 Details of the procedure . . . . . . . . . . . . . . . . . . . . . . . . 39 3.2.2 Evaluation of possible errors . . . . . . . . . . . . . . . . . . . . . . 44 3.3 Noise measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 3.4 MFM probes and their specific characteristics . . . . . . . . . . . . . . . . 49 3.5 Calibration samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3.6 Detection of tip-sample modification . . . . . . . . . . . . . . . . . . . . . 55 4 Quantitative MFM with iron filled carbon nanotube sensors (Fe-CNT) 56 4.1 The monopole character of Fe-CNT sensors . . . . . . . . . . . . . . . . . . 57 4.1.1 Calibration within the point probe approximation . . . . . . . . . . 57 4.1.2 Calibration results and discussion . . . . . . . . . . . . . . . . . . . 59 4.1.3 Quantitative MFM on a [Co/Pt]/Co/Ru multilayer . . . . . . . . . 62 4.2 Inplane sensitive MFM with Fe-CNT sensors . . . . . . . . . . . . . . . . . 63 4.2.1 Bimodal MFM technique . . . . . . . . . . . . . . . . . . . . . . . . 63 4.2.2 Comparison between calculated and measured in-plane contrast . . 66 5 Quantification of magnetic nanoobjects in MFM measurements 70 5.1 Bubble domains in a [Co/Pd]80 multilayer . . . . . . . . . . . . . . . . . . 71 5.1.1 Micromagnetic model . . . . . . . . . . . . . . . . . . . . . . . . . . 72 5.1.2 MFM image simulation . . . . . . . . . . . . . . . . . . . . . . . . . 72 5.1.3 Results and discussion . . . . . . . . . . . . . . . . . . . . . . . . . 74 5.2 Quantitative assessment of the magnetic penetration depth in superconductors 78 5.2.1 Comparison of methods . . . . . . . . . . . . . . . . . . . . . . . . 79 5.2.2 Experimental determination of the temperature dependent penetration depth in a BaFe2(As0:24P0:76)2 single crystal . . . . . . . . . . . 83 6 Magnetization studies of CoFe nanowire arrays on a local and global scale 87 6.1 Revisiting the estimation of demagnetizing fields in magnetic nanowire arrays 88 6.1.1 Available approaches . . . . . . . . . . . . . . . . . . . . . . . . . . 88 6.1.2 Calculation of demagnetizing fields in nanowire arrays . . . . . . . . 91 6.2 Micromagnetic Simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 6.3 Combination of demagnetizing field calculations and micromagnetic simulation100 6.4 Experimental details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 6.5 Global hysteresis measurements of CoFe nanowire arrays with varying length 104 6.6 Local magnetic characterization of a CoFe nanowire array by quantitative MFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 6.6.1 Magnetic structure of individual nanowires . . . . . . . . . . . . . . 107 6.6.2 Magnetization reversal of the nanowire array . . . . . . . . . . . . . 110 6.7 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Conclusions and Outlook 119 Bibliography 121 Acknowledgements 135