Fundação de Amparo a Pesquisa do Estado de Minas Gerais / In this work we have employed the Melting-Nucleation method in order to synthesize semiconductor and semimagnetic quantum dots (QDs), CdSe, CdSxSe1-x, CdS e Cd1-xMnxS, in a glass matrix. We have investigated these QDs by using several experimental techniques and theoretical models, reaching a comprehensive understanding of their fundamental properties. The lattice contraction in CdSe QDs was confirmed by Raman spectroscopy, evidencing that the glass matrix (host material) plays an important role on the vibrational modes of nanocrystals (NCs). Advancement in the synthesis of pseudo-bynary CdSxSe1-x QDs was achieved by obtaining a good control on the alloy composition in two variants of precursor dopings, while the QD size is tuned by annealing. Resonant Raman spectra of these CdSxSe1-x QDs were very well described by the continuum lattice dynamics model, suggesting the propagation of optical phonons within the NC. By studying CdS QDs by temperaturedependent Raman spectroscopy, we have demonstrated that there is a large difference between the thermal expansion coefficients of QD e of bulk material. The same conclusions were obtained for the modal Grüneisen parameters and for the anharmonicity coupling constants, so that they have to be estimated independently of bulk parameters in the study of thermal properties of QDs. We have employed the Electron Paramagnetic Resonance in order to confirm that the migration of Mn2+ ions in Cd1-xMnxS NCs, from the core to the surface, can be controlled by a thermal annealing. We have proved yet that the luminescence emitted by Cd1-xMnxS NCs can be controlled by changing the x concentration and by the thermal annealing, in which the emission of Mn2+ ions (4T1 6A1) is only observed when this magnetic impurity is substitutionally into the core of Cd1-xMnxS NC. From temperature-dependent photoluminescence measurements, we have come up with a model based on rate equations that describes well the energy transfers involving two coupled groups of Cd1-xMnxS NPs. Further emissions from deep defect levels were attributed to two energetically different divacancies, VCd VS, in the wurtzite structure of Cd1-xMnxS NPs, which can be controlled by the magnetic doping. By studying the magneto-optical properties of Cd1-xMnxS NPs, we have demonstrated that the self-purification is the dominant mechanism controlling the doping process in semiconductor QDs grown by the melting-nucleation method. We have demonstrated that the multiphonon Raman scattering in the coupled Cd1-xMnxS NPs, as well as the coupling strength between electrons and optical phonons, can satisfactorily be tuned by the magnetic doping with Mn2+ ions and by an appropriate thermal annealing. Furthermore, we have verified that the magnetic doping have induced variations on the sp-d exchange interaction and in the crystalline quality of NPs. / Neste trabalho nós utilizamos o método de Fusão-Nucleação para sintetizar pontos quânticos (PQs) semicondutores e semimagnéticos, CdSe, CdSxSe1-x, CdS e Cd1-xMnxS, em uma matriz vítrea. Nós investigamos estes PQs utilizando várias técnicas experimentais e modelos teóricos, obtendo um entendimento compreensivo das suas propriedades fundamentais. A contração da rede cristalina nos PQs de CdSe foi confirmada pela espectroscopia Raman, evidenciando que a matriz vítrea (material hospedeiro) desempenha um papel importante sobre os modos vibracionais dos nanocristais (NCs). Um avanço na síntese de PQs pseudo-binários de CdSxSe1-x foi alcançado, obtendo um bom controle sobre a composição da liga em duas variações de dopantes precursores, enquanto o tamanho do PQ é controlado pelo recozimento. Os espectros Raman ressonantes destes PQs de CdSxSe1-x foram muito bem descritos pelo modelo da dinâmica de rede contínua, sugerindo a propagação de fônons ópticos dentro do NC. Ao estudar PQs de CdS por espectroscopia Raman dependente da temperatura, nós demonstramos que existe uma grande diferença entre os coeficientes de expansão térmica do PQ e do material bulk. As mesmas conclusões foram obtidas para os parâmetros de Grüneisen modais e para as constantes de acoplamento da anarmonicidade, de maneira que eles devem ser estimados independentemente dos parâmetros do bulk no estudo das propriedades térmicas dos PQs. Nós utilizamos a Ressonância Paramagnética Eletrônica para confirmar que a migração de íons Mn2+ em NCs de Cd1-xMnxS, do núcleo para a superfície, pode ser controlada por um recozimento térmico. Comprovamos ainda que a luminescência emitida pelos NCs de Cd1-xMnxS pode ser controlada pela modificação da concentração x e pelo recozimento térmico, em que a emissão dos íons Mn2+ (4T1 6A1) é somente observada quando esta impureza magnética está substitucionalmente incorporada no núcleo do NC de Cd1-xMnxS. A partir de medidas de fotoluminescência dependente da temperatura, nós desenvolvemos um modelo baseado em equações de taxa que descreve bem as transferências de energia envolvendo dois grupos acoplados de nanopartículas (NPs) de Cd1-xMnxS. Emissões adicionais a partir de níveis de defeitos profundos que foram atribuídos duas divacâncias energeticamente diferentes, VCd VS, na estrutura wurtzita das NPs de Cd1-xMnxS, que podem ser controladas pela dopagem magnética. Ao estudar as propriedades magneto-ópticas das NPs de Cd1-xMnxS, nós demonstramos que a autopurificação é o mecanismo dominante controlando o processo de dopagem em PQs semicondutores crescidos pelo método de fusão-nucleação. Nós demonstramos que o espalhamento Raman multi-fônon nas NPs de Cd1-xMnxS acopladas, bem como a força do acoplamento entre elétrons e fônons ópticos, podem ser adequadamente sintonizados pela dopagem magnética com íons Mn2+ e por um recozimento térmico apropriado. Além disso, verificamos que a dopagem magnética induziu variações na interação de troca sp-d e na qualidade cristalina das NPs. / Doutor em Física

L'auteur n'a pas fourni de résumé en français / Nowadays in medicine and biotechnology a wide range of applications involves magnetic micro/nano-object manipulation including remote control of magnetic beads, trapping of drug vectors, magnetic separation of labelled cells and so on. Handling and positioning magnetic particles and elements functionalized with these particles has greatly benefited from advances in microfabrication. Indeed reduction in size of the magnet while maintaining its field strength increases the field gradient. In this context, arrays made of permanent micromagnets are good candidates for magnetic handling devices. They are autonomous, suitable for integration into complex systems and their magnetic action is restricted to the region of interest.In this thesis we have elaborated an original approach based on AFM and MFM for quantitative study of the magnetic force and associated force gradients induced by TMP micromagnet array on an individual magnetic micro/nano-object. For this purpose, we have fabricated smart MFM probes where a single magnetic (sub)micronic sphere was fixed at the tip apex of a non-magnetic probe thanks to a dual beam FIB/SEM machine equipped with a micromanipulator.Scanning Force Microscopy conducted with such probes, the so-called Magnetic Particle Scanning Force Microscopy (MPSFM) was employed for 3D mapping of TMP micromagnets. This procedure involves two main aspects: (i) the quantification of magnetic interaction between micromagnet array and attached microsphere according to the distance between them and (ii) the complementary information about micromagnet array structure. The main advantage of MPSFM is the use of a probe with known magnetization and magnetic volume that in combination with modelling allows interpreting the results ably.We conducted MPSFM on TMP sample with two types of microparticle probes: with superparamagnetic and NdFeB microspheres. The measurements carried out with superparamagnetic microsphere probes reveal attractive forces (up to few tens of nN) while MFM maps obtained with NdFeB microsphere probes reveal attractive and repulsive forces (up to one hundred of nN) for which the nature of interaction is defined by superposition of microsphere and micromagnet array magnetizations. The derived force and its gradient from MFM measurements are in agreement with experiments on microparticle trapping confirming that the strongest magnetic interaction is observed above the TMP sample interfaces, between the areas with opposite magnetization. Thanks to 3D MFM maps, we demonstrated that intensity of magnetic signal decays fast with the distance and depends on micromagnet array and microsphere properties.Besides the magnetic interaction quantification, we obtained new information relevant to TMP sample structure: we observed and quantified the local magnetic roughness and associated fluctuations, in particular in zones of reversed magnetization. The variation of detected signal can reach the same order of magnitude as the signal above the micromagnet interfaces. These results complete the experiments on particle trapping explaining why magnetic microparticles are captured not only above the interfaces, but also inside the zones of reversed magnetization.Quantitative measurements of the force acting on a single (sub)microsphere associated to the modelling approach improve the understanding of processes involved in handling of magnetic objects in microfluidic devices. This could be employed to optimize the parameters of sorting devices and to define the quantity of magnetic nanoparticles required for labelling of biological cells according to their size. More generally these experimental and modelling approaches of magnetic interaction can meet a high interest in all sorts of applications where a well-known and controlled non-contact interaction is required at micro and nano-scale.

Uměle vytvořené systémy spinového ledu jsou vhodným nástrojem pro zkoumání neobvyklých jevů, které se v přírodě dají jen těžko pozorovat. Speciálním případem umělého spinového ledu je kagome mřížka, která umožňuje zkoumat kolektivní chování spinů v látce. Tento systém má řadu předpovězených exotických magnetických fází, které zatím nebyly změřeny a prozkoumány v reálném prostoru. V rámci této práce se zabýváme úpravou kagome mřížky tak, aby mohla být využita ke zkoumání exotických stavů v reálném prostoru. Experimenty provedené na naší upravené mřížce ukazují, že jsme schopni detekovat nízko i vysoko energiové stavy, a tedy, že námi navržená úprava kagome mřížky je vhodná pro zkoumání exotických stavů v reálném prostoru.

Silné prostorové omezení materiálů způsobuje jejich nové vlastnosti, které mohou najit uplatnění v mnoha vědeckých i technických odvětvích. Snaha zmenšit velikosti součástek, zvětšit hustotu zápisu a zefektivnit procesy je současným trendem elektronického průmyslu. V této práci je studován vliv prostorového omezení na vlastnosti metamagnetického železo-rhodia (FeRh) během fázové přeměny. FeRh je materiál vykazující fázovou přeměnu prvního druhu mezi antiferomagnetickou a feromagnetickou fází. Metodou mikroskopie magnetických sil v magnetickém poli kolmém na rovinu vzorku je zobrazeni a analyzována struktura fázových domén behem fázové přeměny. Kvantitativní analýza naměřených dat je provedena užitím výškové korelační funkce a její výsledky jsou porovnány pro různé velikosti struktur a tloušťky tenkých vrstev.

Umělé spinové systémy jsou vhodným nástrojem pro zkoumání a ovlivňování neobvyklých exotických nízko-energiových stavů přímo v reálném prostoru. Experimentální realizace těchto systémů jsou založeny na výrobě vzájemně interagujících nano-magnetů uspořádaných do požadované geometrie. Prvním a asi i nejvíce studovaným umělým systémem je prostá čtvercová mřížka. V této práci se zabýváme modifikováním této čtvercové geometrie, které umožní zachycení různých magnetických fází založených na modelech ledu. Výsledky ukazují, že vhodným nastaveném této modifikace lze realizovat různé magnetické fáze, včetně neuspořádané spinové kapalné fáze s uvězněnými magnetickými kvazičásticemi (magnetickými monopóly).

This dissertation presents a substantial contribution to a new field of material science, the investigation of the magnetic properties of 3D curved surfaces, achieved by using a self-assembled geometrical transformation of an initially planar membrane. Essential magnetic properties of thin films can be modified by the process of transforming them from a 2D planar film to a 3D curved surface. By investigating and controlling the reasons that influence the properties, it is possible to improve the functionality of existing devices in addition to laying the foundation for the future development of microelectronic devices based on curved magnetic structures. To accomplish this, it is necessary both to fabricate high-quality 3D curved objects and to establish reliable characterization methods based on commonly available technology. The primary objective of this dissertation is to develop techniques for characterizing the static and dynamic magnetic properties of self-assembled rolled 3D geometries. The second objective is to examine the origin of shape-, size- and strain/curvature-induced effects. The developed approach based on anisotropic magnetoresistance (AMR) measurement can quantitatively define the rolling-induced static magnetic changes, namely the induced magnetoelastic anisotropy, thus eliminating the need for microscopic imaging to characterize the structures. The interpretation of the AMR signal obtained on curved stripes is enabled by simultaneous visualization of the domain patterns and micromagnetic simulations. The developed approach is used to examine the effect of sign and magnitude of curvature on the induced anisotropies by altering the rolling direction and diameter of the 'Swiss-roll'. Furthermore, a time-averaged imaging technique based on conventional microscopies (magnetic force microscopy and Kerr microscopy) offers a novel strategy for investigating nanoscale periodic domain wall oscillations and hence dynamic magnetic characteristics of flat and curved structures. This method exploits the benefit of a position-dependent dwell time of periodically oscillating DWs and can determine the trajectory and amplitude of DW oscillation with sub-100 nm resolution. The uniqueness of this technique resides in the ease of the imaging procedure, unlike other DW dynamics imaging methods. The combined understanding of rolling-induced anisotropy and imaging DW oscillation is utilized to examine the dependence of DW dynamics on external stimuli and the structure's physical properties, such as lateral size, film thickness, and curvature-induced anisotropy. The presented methods and fundamental studies help to comprehend the rapidly expanding field of 3-dimensional nanomagnetism and advance high-performance magneto-electronic devices based on self-assembly rolling.

No description available.

Nous avons réalisé des couches minces de Co sur un substrat semi-conducteur (Si(111)) par voix électrochimique, en mode potentiostatique et en mode galvanostatique, et étudié leurs propriétés topographiques (AFM, MEB) et magnétique (RMN, effet Kerr, SQUID), afin de relier ces propriétés aux modes de croissance et aux conditions de dépôt à priori identiques conduisent à des morphologies et donc des propriétés magnétiques très différentes. Nous avons développé une approche rigoureuse avec un contrôle systématique de la qualité du substrat de départ pour clarifier les modes de nucléation et de croissance en fonction du potentiel appliqué en chronoampérométrie. Une transition d’un mode de nucléation instantanée vers un mode de nucléation progressive en fonction du potentiel appliqué est mise en évidence. La modélisation à l’aide du modèle de Scharifker-Hills des modes de nucléation et de croissance est cohérente avec les images de topographie AFM. La croissance est tridimensionnelle du type Volmer-Weber et l’aimantation est orientée dans le plan. Par RMN et également X-Ray Photoemission Spectroscopy (XPS), nous montrons qu’une couche d’hydroxyde de cobalt magnétiquement morte se forme à l’interface avec le Si. En mode galvanostatique, des grains avec des facettes parfaitement cristallisés présentent des domaines magnétiques localisés dans la plupart des ilots. Nous avons également effectué une étude très critique des techniques de dépôt/arrachage employées dans la littérature montrant que celle-ci sont inadaptées aux substrats semi-conducteur, un dépôt subsistant sur la surface quel que soit la technique d’arrachage choisie. / We have deposited thin layers of Co on a semiconductor substrate Si(111), by electrochemical method, in potentiostatic and galvanostatic mode, and we have studied their topographic properties (AFM, MEB) and magnetic (RMN, effet Kerr, SQUID). Thanks to these different techniques, we could relate these properties to the growth modes and to the a priori identical deposition conditions, which lead to different morphologies and therefore different magnetic properties. We have developed a rigorous approach with a systematic control of the quality of the substrate in order to clarify the nucleation and growth modes as a function of the potential applied in chronoamperometry. A transition from an instantaneous nucleation mode to a progressive nucleation mode as a function of the applied potential is highlighted. Modeling with Scharifker-Hills model of nucleation and growth modes is consistent with AFM topography images. The growth is three-dimensional of a Volmer-Weber type and the magnetization is oriented in the plane. By NMR and also X-Ray Photoemission Spectroscopy (XPS), we could show that a layer of magnetically dead cobalt hydroxide layer forms at the interface with Si. In galvanostatic mode, grains with perfectly crystallized facets have magnetic domains located in most of the islands. We have also carried out a very critical study of the deposition / tearing techniques used in the literature showing that they are unsuitable for semiconductor substrates, a deposit remaining on the surface whatever the tearing technique chosen.

Fundação de Amparo a Pesquisa do Estado de Minas Gerais / In this work, Zn1-xAxTe (A = Mn, Co) diluted magnetic semiconductors (DMS) nanocrystal (NCs) were successfully grown in the P2O5 ZnO Al2O3 BaO PbO glass system synthesized by the method of Fusion-Nucleation, after subjecting to appropriate thermal annealing. Various experimental techniques were used in this study in order to get a comprehensive understanding of the optical, morphological, structural and magnetic properties these NCs. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) images revealed the size of both of Zn1-xMnxTe and Zn1-xCoxTe NCs. From the vibrating sample magnetometer (VSM) technique, there was growth behavior of magnetization and magnetic susceptibility as a function of the Mn concentration in the samples containing Zn1-xMnxTe NCs. At lower Mn concentrations, the sp electrons of ZnTe host semiconductor interact with the d electrons of Mn2+ ions, resulting in the sp-d exchange interaction, which causes a small increase in susceptibility. At higher Mn concentrations, the d-d exchange interaction between Mn atoms dominates over the sp-d exchange interaction, resulting in an abrupt increase in susceptibility. The EPR spectra, in addition to prove the results exhibited the well-known sextet hyperfine lines of Mn2+ ions, since samples with low Mn concentrations revealed the presence of Mn2+ ions within and near the surface of the ZnTe NCs. From the optical absorption spectra (OA) and photoluminescence (PL), analyzed on the basis of crystal field theory (CFT) as well as of the diffraction X-ray (XRD), Raman scattering (RS) and electron microscopy transmission (TEM) techniques, the substitutional incorporation of Mn2+ ions was confirmed up to its solubility limit (x = 0.100) ZnTe NCs. Above this concentration, can observe the formation of manganese oxide NCs such as MnO and MnO2, since the nucleation rate for the formation of these NCs is greater than that of Zn1-xMnxTe NCs, at high concentrations. Furthermore, from the PL spectra, it was found that it is possible to tune the emission of energy related to transition 4T1(4G) → 6A1(6S) of Mn2+ ions, of the spectral orange region to the near infrared, depending on Mn concentration. This is possible due to the variation of the local crystal field, where these ions are inserted. From the OA spectra, analyzed on the basis of CFT, it showed that Co2+ ions are substitutionally incorporated in tetrahedral sites of ZnTe NCs, due to its characteristics transitions in visible and near infrared spectral region. This evidence has been enhanced from MFM images, since NCs doped with magnetic ions, magnetically respond when induced by the magnetization of the probe. / Neste trabalho, nanocristais semicondutores magnéticos diluídos (SMD) de Zn1-xAxTe (A = Mn; Co) foram crescidos com sucesso no sistema vítreo P2O5 ZnO Al2O3 BaO PbO, sintetizado pelo método de Fusão-Nucleação, após submetê-lo a tratamento térmico apropriado. Várias técnicas experimentais foram utilizadas neste estudo a fim de obter um entendimento compreensivo das propriedades ópticas, morfológicas, estruturais e magnéticas desses NCs. Imagens de microscopia eletrônica de transmissão (MET) e microscopia de força atômica (MFA) revelaram o tamanho tanto de NCs de Zn1-xMnxTe quanto de Zn1-xCoxTe. A partir da técnica de magnetometria de amostra vibrante (MAV), verificou-se o crescimento da magnetização e o comportamento da susceptibilidade magnética, em função da concentração de Mn, em amostras contendo NCs de Zn1-xMnxTe. Em baixas concentrações de Mn, os elétrons sp do semicondutor hospedeiro ZnTe, interagem com os elétrons d dos íons Mn2+, resultando na interação de troca sp-d, que provoca um pequeno aumento na susceptibilidade magnética. Já, em concentrações mais elevadas de Mn, a interação de troca d-d entre átomos de Mn domina a interação de troca sp-d, o que resulta em um aumento abrupto da susceptibilidade. Os espectros RPE, além de comprovar esses resultados, exibiram o bem conhecido sexteto de linhas hiperfinas de íons Mn2+, uma vez que amostras com baixas concentrações de Mn revelaram a presença de íons Mn2+ no interior e próximos à superfície dos NCs de ZnTe. A partir dos espectros de absorção óptica (AO) e fotoluminescência (FL), analisados com base na teoria do campo cristalino (TCC), bem como das técnicas de difração de raios-X (DRX), espalhamento Raman (ER) e microscopia eletrônica de transmissão (MET), confirmou-se a incorporação substitucional de íons Mn2+ até seu limite de solubilidade nominal (x = 0,100) em NCs de ZnTe. Acima dessa concentração, observa-se a formação de NCs de óxido de manganês, tais como MnO e MnO2, uma vez que a taxa de nucleação para a formação desses NCs é maior que a de NCs de Zn1-xMnxTe, em altas concentrações. Além disso, a partir dos espectros FL, verificou-se que é possível sintonizar a energia de emissão relacionada à transição 4T1(4G) → 6A1(6S) de íons Mn2+, da região espectral laranja ao infravermelho próximo, em função da concentração de Mn. Isso é possível devido à variação do campo cristalino local, onde esses íons estão inseridos. A partir dos espectros AO, analisados com base na TCC, evidenciou-se que íons Co2+ são incorporados substitucionalmente em sítios tetraédricos de NCs de ZnTe, devido às suas transições características na região espectral do visível e infravermelho próximo. Essa evidência foi reforçada a partir de imagens de MFM, uma vez que os NCs, dopados com íons magnéticos, respondem magneticamente quando induzidos pela magnetização da sonda. / Doutor em Física

Zur Aufklärung der lokalen Magnetisierungs- und magnetischen Streufeldstruktur in ferromagnetischen und supraleitenden Materialien wurden magnetkraftmikroskopische (Magnetkraftmikroskopie-MFM) Untersuchungen durchgeführt und quantitativ ausgewertet. Für eine solch quantitative Auswertung muss der Einfluß der verwendeten MFM-Spitzen auf das MFM-Bild bestimmt und in geeigneter Weise subtrahiert werden. Hierzu wurden Spitzenkalibrierungsroutinen und ein Verfahren zur Entfaltung der gemessenen MFM-Daten implementiert, das auf der Wiener Dekonvolution basiert. Mit Hilfe dieser Prozedur können sowohl die räumliche Ausdehnung als auch die Größe der Streufelder direkt aus gemessenen MFM-Bildern bestimmt werden. Gezeigt wurde diese Anwendung für die Durchmesserbestimmung von Blasendomänen in einer (Co/Pd)-Multilage und für die Bestimmung der temperaturabhängigen magnetischen Eindringtiefe in einem supraleitendem BaFe2(As0.24P0.76)2 Einkristall. Desweiteren konnte durch die Kombination von mikromagnetischen Rechnungen und der quantitativen MFM-Datenanalyse die Existenz einer dreidimensionalen Vortex-Struktur am Ende von Co48Fe52-Nanodrähten nachgewiesen werden. Damit ist es gelungen die Tiefensensitivität der Magnetkraftmikroskopie erfolgreich in die Rekonstruktion der vermessenen Magnetisierungsstruktur einzubeziehen.