The experimental work presented in this thesis is based on a wide assortment of very advanced and highly sophisticated photoelectron spectroscopy (PES) techniques. The objective of the present study has been to reveal and understand the electronic structure and electron dynamics in a broad spectrum of materials, ranging from wide band gap oxides, via semiconductors along with metals, and finally high-temperature superconductors. The first part of the thesis concerns laser-based pump-and-probe PES. This unique experimental technique has permitted a study of the excited electronic structure and the electron dynamics of several semiconductor surfaces. An insight into details of the adatom to restatom charge-transfer of the Ge(111)c(2x8) surface is presented, as well as an estimate for the timescale in which the dynamic adatoms of the Ge(111):Sn(sqrt3xsqrt3)R30deg surface operate. Further results comprise a novel unoccupied surface state at the GaSb(001) surface as well as a time-resolved study of the charge accumulation layer at the InAs(111)A/B surfaces. In the second part, high-resolution synchrotron based angle-resolved PES (ARPES) data from the cuprate high-temperature superconductor La(2-x)Sr(x)CuO(4) (LSCO) is presented. This extensive study, reveals detailed information about how the Fermi surface and electronic excitations evolve with doping in the superconducting state. The results comprise support for a connection between high- and low-energy electronic responses, the characteristics of the superconducting gap, and indication of a quantum phase transition between two different superconducting phases. In the third group of experiments we move away from the two-dimensional systems and concentrate on fully three-dimensional compounds. By the use of soft x-ray ARPES it is possible to extract the three-dimensional electronic structure in a straightforward manner with increased k(perpendicular)-resolution. As a result the first high-quality ARPES data from Cu2O is presented, as well as a novel method for extracting the (real space) electron density by ARPES. These experiments clearly display the advantages of using soft x-ray ARPES. If the material and type of experiment is chosen wisely, the benefit of the increased k||-window and the free electron final state, surpass the drawbacks of decreased count-rate and inferior energy resolution. Finally we return to the high-temperature superconductors (NCCO & Nd-LSCO) and make use of the increased bulk-sensitivity. From an evident change in the shape of the Fermi surface when moving from low to high photon energies, the durface to bulk difference in electronic structure is highlighted. / QC 20100810

The high pressure and high temperature (HPHT) behavior of Ti1-xAlxN coatings on cutting tool inserts have been of interest for this diploma work. A literature study of HPHT techniques as well as measurement methods has been done. A diamond anvil cell (DAC) would be a good device to achieve high pressure and high temperature conditions on small samples. Another way to obtain these conditions would be a cutting test, which has been performed on a Ti1-xAlxN coated cutting tool insert with x = 0.67. Also a cubic press could be used to apply HPHT on a     Ti1-xAlxN sample or a large volume press on a whole cutting tool insert. To measure hardness on thin coatings a nanoindentor could be used, which have been done on heat-treated Ti0.33Al0.67N and TiN samples. X-ray diffraction (XRD) is a suitable method to measure phase composition of a sample and was performed on the cutting tested insert as well as on an untreated reference insert. Three ways to continue this project have been outlined all starting with more comprehensive cutting tests.

Deposition of alumina thin films in the presence of fluorine as a method for reducing thehydrogen incorporation in the films was investigated in this thesis. Hydrogen incorporated in alumina thin films have been shown to cause a lower density and refractive index in amorphous films, assist electrical conduction through thin amorphous films as well as inhibiting the formation of the thermally stable α-phase. The depositions were made in a ultra high vacuum system where high vacuum conditions were simulated by leaking water vapor into the system. No substrate heating or substratebias was applied. Films were deposited at a range of fluorine partial pressures, from 2,5×10-6- 5×10-5 Torr, and were analyzed by elastic recoil detection analysis, nuclear reaction analysis, scanning electron microscopy and x-ray diffraction. Mass spectrometry measurements were done during the depositions to analyze the deposition process. The mass spectrometry investigations show that there is a trend of increasing O2 partial pressures with increasing fluorine partial pressures during the depositions. This is attributed to the well known reaction: 2H2O+F2→O2+4HF. However, no trend in the measured water partial pressures can be observed. The increase in the O2 partial pressure is therefore attributed to a reaction between water and fluorine on the chamber walls. The chemical analysis show that the hydrogen incorporation in the films were lowered from ~10 at.% when deposited in the presence of water vapor to ~3 at.% when deposited in the presence of water vapor and 2×10-5 Torr fluorine. The hydrogen incorporation stabilize at ~3 at.% at higher fluorine partial pressures. However, there is also a large amount of fluorine incorporated in the films, ~20 at.% with a fluorine partial pressure during the deposition of 2×10-5 Torr and ~46 at.% with a fluorine partial pressure of 5×10-5 Torr. There is a slight increase in the aluminum concentration in the films deposited with fluorine. This is attributed to bonding the hydrogen in aluminum hydroxide while the reminder forms Al2O3 or Al leading to an increase in the aluminum concentration in the film. A linear decrease in the deposition rate with increasing fluorinepartial pressures during the deposition was observed, this can be explained by sputter etching of AlFx and AlOxFy by energetic O- ions. The XRD investigation show that the films deposited with the highest fluorine partial pressures were x-ray amorphous, the films with deposited with lower fluorine partial pressures are therefore also assumed to be amorphous.

In orthopaedic practice, fractures are usually stabilised with metal screws or rods. This is done in order to keep the fracture parts in place during the rather slow healing process. The healing time can potentially be reduced by local- or systemic treatment with different bone promoting drugs. In later years, lithium, otherwise used to treat bipolar disease, has shown promise to be such a drug.   The aim of this master thesis was to find a way to coat metal bone screws with lithium and to characterise the coating. The coating was to be designed in such a way that it could release lithium to the surrounding bone tissue.   Lithium chloride was incorporated into a titanate sol-gel and attached to silicon wafers and stainless steel screws by dip coating. Wafers were used for initial in vitro studies of how lithium changed coating characteristics. This was studied using ellipsometry, AFM and SEM. Lithium is most probably physisorbed and not incorporated into the network building up the sol-gel. Coating structure is changed as more lithium is incorporated. For large amounts of lithium, the nanoparticles normally formed when curing the sol-gel are inhibited. One effect of this is reduced bioactivity, seen as a reduced ability for calcium phosphate crystals to nucleate on the coating when immersed in simulated body fluid. Lithium release was investigated using AAS. Lithium is released from the coating, showing a burst effect. By changing the number of coating layers used, the release profile can be partly altered. The coating was also applied to screws, showing good attachment, and the lithium release profile was similar to the one seen from wafers. Finally, a screw model was used in rats to assess the effect of local lithium treatment from screws and systemic lithium treatment on fracture healing. In the model, a screw was inserted in tibia, mimicking a fracture. When the bone around the screw was healed, a pullout test was performed, giving information about the strength of the bone surrounding the screw. No significant difference could be found for either local- or systemic lithium treatment compared to control. However, when evaluating the strength of intact bone in a similar way, a positive effect of systemic lithium treatment could be seen. Therefore, it is still likely that lithium has a positive effect on bone and further studies are needed to fully evaluate its role in fracture healing. / Vid behandling av benbrott stabiliseras vanligtvis frakturen internt med metallskruvar och metallstavar. Detta görs för att hålla brottbitarna på plats under den relativt långsamma läkprocessen. Det är möjligt att minska tiden för frakturläkning genom att lokalt eller systemiskt behandla med olika läkemedel som främjar bentillväxt. På senare år har det presenterats bevis för att litium, som annars används som psykofarmaka, fungerar som ett sådant läkemedel.   Syftet med detta examensarbete var att hitta en metod för att fästa litium på benimplantat. Litium skulle fästas på ett sådant sätt att frisläppning till omgivande vävnad blev möjlig.   Litiumklorid inkorporerades i en titanat-solgel och lager av detta lades på kiselytor och rostfria skruvar genom s.k. ”dip-coating”. Kiselytorna användes för initiala in vitro-studier av hur litium ändrade beläggningens egenskaper. Litium sitter antagligen fast på ytan av det tredimensionella nätverk som utgör solgelen, istället för att sitta inbundet i nätverket. Lagerstrukturen ändras ju mer litium som inkorporeras och vid stora mängder skapas inte de nanopartiklar som vanligtvis finns i en solgel-baserad beläggning. En följd av detta är reducerad bioaktivitet för beläggningen, dvs. en minskad förmåga för kalciumfosfatkristaller att bildas på ytan. Litium frisläpps från beläggningen, dock sker denna frisläppning snabbt. Genom att belägga ytan med flera lager av solgel kan frisläppningskinetiken delvis ändras. Solgelen kunde också med god vidhäftning appliceras på skruvar och frisläppningskinetiken från en skruv är liknande den från en kiselyta. Slutligen användes en skruvmodell i råtta för att undersöka vilken effekt lokal respektive systemisk litiumbehandling har på frakturläkning. I modellen efterliknas ett benbrott genom att en skruv sätts in i skenbenet.  När benvävnaden runt skruven har läkt görs ett utdragstest på skruven vilket ger information om benets styrka. Ingen signifikant skillnad i skruvens utdragskraft kunde ses mellan de båda försöksgrupperna och kontrollgruppen. Däremot hade gruppen som fick systemisk litiumbehandling fått starkare ben totalt, vilket indikerar att litium har effekt på intakt ben. På grund av dessa resultat finns det fortfarande skäl att tro att litium har en positiv påverkan på ben, varför dess effekt på frakturläkning bör undersökas ytterligare.

A new NOx sensor for high-temperature applications has been developed and thouroghly characterised. The sensor layers are a mixed oxide of CoO, MgO and MgO2 deposited by thermal evaporation with a porous platinum gate on top, deposited by thermal evaporation or sputtering. The sensitivity and selectivity of the sensor is promising and is shown to depend upon the ratio between Co and Mg in the film and a number of competing mechanisms are shown to take place on the sensor surface. Response and recovery of the device is still slow and there are some drift, which are suggested to be due to a restructuring sensor surface during operation that was found by SEM-studies. Finally,the oxide surface has been characterized by XPS and a novel process for deposition of the sensor layers by lift-off technique has been developed.

<p>In the growing field of spintronics there is a strong need for development of flexible lightweight semi-conducting magnets. Molecular organic-based magnets are attractive candidates since it is possible to tune their properties by organic chemistry, making them so-called “designer magnets”. Vanadium tetracyanoethylene, V(TCNE)_x, is particularly interesting since it is a semiconductor with Curie temperature above room temperature (T_C~400 K). The main problem with these organic-based magnets is that they are extremely air sensitive. This thesis reports on the frontier electronic structure of the V(TCNE)_x by characterization with photoelectron spectroscopy (PES) and near edge x-ray absorption fine structure (NEXAFS) spectroscopy. It also presents a new and more flexible preparation method of this class of organic-based thin film magnets. The result shows improved air stability of the V(TCNE)_x prepared with this method as compared to V(TCNE)_x prepared by hitherto used methods.</p>

<p>The newfound capability of creating moisture sensitive interference multilayered thin films (MLTFs) comprising microfibrillated cellulose and polymers has not previously been possible to implement on surfaces other than silicon wafer strips. Being able to incorporate interference MLTFs on fibre-based materials would introduce the possibility for new applications within authentication, sensing and customer attraction for the paper and packaging industry. By using trichloro (1H, 1H, 2H, 2H-perfluorooctyl) silane we were able to hydrophobically modify silicon substrates, enabling interference MLTF lift-off and thus the creation of free-standing MLTFs of approximately 400 nm thickness. Contact dried MLTFs approximately 250 nm thick, were successfully transferred to copy- and filter paper as well as to cellulose-based dialysis membranes. We can also report on the successful synthesis of interference MLTFs directly on a fibre composite material and on aluminium. Initial tests of a method to quantify the pull-off conditions of the MLTFs from the fluorinated surfaces using the Micro Adhesion Measurement Apparatus showed promising results.</p>

<p>The aim of this thesis is to investigate how material surfaces are affected by various surface treatments and how this relates to the adhesion of the coating. The materials that were studied were WC-Co and Cermets and the surface treatments used were polishing, grinding with coarser and finer abrasive grains, and finally wet blasting and dry blasting. Focus was on deformations and residual stresses in the surface, surface roughness and cracks. The test methods used for examining the samples included surface roughness measurements, residual stress measurements, adhesion tests using Rockwell indentation and SEM images of the surface and the cross section.<br /><br />The results concluded that polishing gives very good adhesion. Additionally, the adhesion for ground surfaces was good for WC-Co but very poor for Cermets. Furthermore, it was observed that finer abrasive grains did not result in better adhesion. In fact, the coarser grains gave slightly better results. Finally, it was concluded that wet blasting has a clear advantage over dry blasting and results in much better adhesion, especially for the Cermets. The results for the WC-Co were a bit inconsistent and so further research is required.</p>

Materials based on fullerenes and carbon nanotubes are very much different from most “traditional” materials, primarily because they are built from nanosized molecules with highly symmetry-dependent properties. Being the subject of a very active research field over the last twenty years, carbon nanostructures proved to be indeed extraordinary. Their splendid mechanical properties attract a great interest among material scientists. Their wide range of electrical properties, from ballistic conductors to insulators, makes them ideal candidates for future, better electronics. The possibilities seem to be nearly unlimited, with proposed applications ranging from quantum computing to medicine. However, in order to make it all happen one day, we first need to explore and understand the physics and chemistry of carbon nanomaterials. This work focuses on production and characterization of materials and structures in which fullerenes and/or carbon nanotubes are the main ingredients, and which can be produced or modified under high-pressure – high-temperature (hp-hT) conditions. Raman and photoluminescence spectroscopy, X-ray diffraction and scanning probe microscopy were employed for characterization of the samples. The research presented in this thesis is spread over a rather wide range of carbon nanomaterials. To highlight some of the main results – the first hp-hT polymerization of C60 nanorods and the C60-cubane compound is reported. The polymerization mechanism in the latter case was identified to be radically different from that in pure C60. The pressure-temperature diagram of C60-cubane is presented. A comparative study of C60 and C70 peapods under extreme p-T conditions reveals how the confinement affects the fullerenes’ ability for polymerization. Finally, in situ resistance measurements on Rb4C60 under high pressure show that the semiconducting character of this material persists at least up to 2 GPa, contradicting earlier reports on the existence of an insulator-to-metal transition and providing an insight into conduction mechanisms in this anomalous intercalated compound.

During the last decade, AlGaN High Electron Mobility Transistors (HEMTs) have been intensively studied because their fundamental electrical properties make them attractive for highpower microwave device applications. Despite much progress, AlGaN HEMTs are far from fully understood and judged by the number of published papers the understanding of advanced structures is even poorer. This work is an exploration of the electrical and structural properties of advanced HEMT structure containing AlN exclusionlayer and double heterojunctions. These small modifications had great impact on the electrical properties. In this work, AlGaN HEMT structures grown on SiC substrates by a hot-wall MOCVD have been characterized for their properties using optical microscopy, scanning electron microscopy, transmission electron microscopy, capacitance/voltage, eddy-current resistivity, and by homebuilt epi-thickness mapping equipment. A high electron mobility of 1700 [cm2/Vs] was achieved in an AlN exclusion-layer HEMT. A similar electron mobility of 1650 [cm2/Vs] was achieved in a combination of a double heterojunction and exclusion-layer structure. The samples had approximately the same electron mobility but with a great difference: the exclusion-layer version gave a sheet carrier density of 1.58*1013 [electrons/cm2] while the combination of double heterojunction and exclusion-layer gave 1.07*1013 [electrons/cm2]. A second 2DEG was observed in most structures, but not all, but was not stable with time. The structures we grew during this work were also simulated using a one-dimensional Poisson-Schrödinger solver and the simulated electron densities were in fairly good agreement with the experimentally obtained. III-nitride materials, the CVD concept, and the onedimensional solver are shortly explained.