In dieser Dissertation wurden die ungewöhnlichen und einzigartigen Eigenschaften von Edelmetall-Clustern untersucht, die durch Quantum-Confinement im Sub-Nanometer-Bereich entstehen. Dabei zeigt sich, dass die chemischen und physikalischen Eigenschaften und damit die Funktionen nicht vom Festkörper abgeleitet werden können und stark von der Anzahl der Atome abhängen. Die erzielten theoretischen Ergebnisse wurden in enger Zusammenarbeit mit experimentell arbeitenden Partnergruppen erzielt. Dabei hat sich gezeigt, dass durch die enge Kooperation zwischen Theorie und Experiment ein tiefes Verständnis von fundamentalen Prozessen und den zugrunde liegenden Mechanismen erlangt werden kann. Im Rahmen dieser Dissertation wurden die Reaktivität von geladenen Goldoxid-Clustern in der Gasphase, die ultraschnelle Dynamik von Edelmetall-Clustern und deren Komplexen sowie die optischen Eigenschaften von kleinen, deponierten Silber-Clustern untersucht und damit Beiträge geliefert, die einzigartigen Eigenschaften von Edelmetall-Clustern im Zusammenhang mit der heterogenen Katalyse und Nano-Optik besser zu verstehen. / In this thesis, the unique novel properties of noble metal clusters which arise in the sub-nanometer size regime due to quantum confinement have been theoretically explored. It has been demonstrated that by adding or removing a single atom the chemical and physical properties and functionality of noble-metal clusters can strongly change. The theoretical results have been derived in close cooperation with experimental findings of partner groups demonstrating that by joint theoretical and experimental efforts thorough understanding of fundamental processes and underlying mechanisms can be achieved. This thesis addresses the reactivity of charged gas-phase gold-oxide clusters in the context of the heterogeneous gold nano-catalysis, the ultrafast dynamical properties of noble-metal clusters and their complexes, and the optical properties of silver clusters at surfaces.

En chimie quantique, le principe variationnel est largement utilisé pour calculer la limite supérieure de l'énergie exacte d'un système atomique ou moléculaire. Des méthodes pour calculer la valeur limite inférieure de l'énergie existent mais sont bien moins connues. Une méthode précise pour calculer une telle limite inférieure permettrait de fournir une barre d'erreur théorique pour toute méthode de chimie quantique. Nous avons appliqué des méthodes de type variance pour calculer différentes énergies limites inférieures de l'atome d'hydrogène en utilisant des fonctions de base gaussiennes. L'énergie limite supérieure se trouve être toujours plus précise que ces différentes limites inférieures, i.e. plus proche de l'énergie exacte. L'importance de points singuliers sur l'évaluation de valeurs moyennes d'opérateurs quantiques a également été soulignée.Nous avons étudié les réactions d'adsorption d'un atome de fluor et d'un ion fluorure sur de petits agrégats de lithium Li$_n$ (n=2-15), à l'aide de méthodes de chimie quantique précises. Pour le plus petit système, nous avons montré que la formation de complexes stables Li$_2$F et Li$_2$F$^-$ se produit par un transfert d'électrons sans barrière et à longue portée, de Li$_2$ vers F pour le système neutre et l'inverse pour le système anionique. De telles réactions pourraient être rapides à très basse température. De plus, les complexes formés présentent des caractéristiques uniques de "longue liaison". Pour les systèmes plus gros Li$_n$F/Li$_n$F$^-$ ($n\geqslant4$), nous avons montré que les énergies d'adsorption peuvent être aussi grandes que 6~eV selon le site d'adsorption et que plus d'un état électronique est impliqué dans le processus d'adsorption. Les complexes formés présentent des propriétés intéressantes de "super alcalins" et pourraient servir d'unités de base dans la synthèse de composés à transfert de charge avec des propriétés ajustables. / In quantum chemistry, the variational principle is widely used to calculate an upper bound to the true energy of an atomic or molecular system. Methods for calculating the lower bound value to the energy exist but are much less known. An accurate method to calculate such a lower bound would allow to provide a theoretical error bar for any quantum chemistry method. We have applied variance-like methods to calculate different lower bound energies of a hydrogen atom using Gaussian basis functions. The upper bound energy is found to be always more accurate than the lower bound energies, i.e. closer to the exact energy. The importance of singular points on mean value evaluation of quantum operators has also been brought to attention.The adsorption reactions of atomic fluorine (F) and fluoride (F$^-$) on small lithium clusters Li$_n$ (n=2-15) have been investigated using accurate quantum chemistry ab initio methods. For the smallest system, we have shown that the formation of the stable Li$_2$F and Li$_2$F$^-$ complexes proceeds via a barrierless long-range electron transfer, from the Li$_2$ to F for the neutral and conversely from F$^-$ to Li$_2$ for the anionic system. Such reactions could be fast at very low temperature. Furthermore, the formed complexes show unique long bond characteristics. For the bigger Li$_n$F/Li$_n$F$^-$ systems ($n\geqslant 4$), we have shown that the adsorption energies can be as large as 6~eV depending on the adsorption site and that more than one electronic state is implied in the adsorption process. The formed complexes show interesting "superalkali" properties and could serve as building blocks in the synthesis of charge-transfer compounds with tunable properties.

Metal oxide nanocrystals have attracted significant interests due to their unique chemical, physical, and electrical properties which depend on their size and structure. In this study, a continuous flow microreactor system was employed to synthesize metal oxide nanocrystals in aqueous solution. Assembly of nanocrystals is considered one of the most promising approaches to design nano-, microstructures, and complex mesoscopic architectures. A variety of strategies to induce nanocrystal assembly have been reported, including directed assembly methods that apply external forces to fabricate assembled structures. In this study ZnO nanocrystals were synthesized in an aqueous solution using a continuous flow microreactor. The growth mechanism and stability of ZnO nanocrystals were studied by varying the pH and flow conditions of the aqueous solution. It was found that convective fluid flow from Dean vortices in a winding microcapillary tube could be used for the assembly of ZnO nanocrystals. The ZnO nanocrystal assemblies formed three-dimensional mesoporous structures of different shapes including a tactoid, a retangle and a sphere. The assembly results from a competing interaction between electrostatic forces caused by surface charge of nanocrystals and collision of nanocrystals associated with Dean vortices. The as synthesized colloidal ZnO nanocrystals or assembly were directly deposited onto a substrate to fabricate ZnO nanostructured surfaces. The rectangular assembly led to flower-like ZnO nanostructured films, while the spherical assembly resulted in amorphous ZnO thin film and vertical ZnO nanowire (NW) arrays. In contrast to the formation of flower structure or amorphous thin film, only colloidal ZnO nanocrystals were used as the building blocks for forming vertical ZnO NW arrays. This study demonstrates the versatility of the microreactor-assisted nanomaterial synthesis and deposition process for the production of nanostrucuturesres with various morphologies by tuning the physical parameters while using the same chemical precursors for the synthesis. ZnO flower structure was coated on a microwick structure to improve the capillary flow. The coated microwick structure showed an enhanced capillary rise, which was attributed to the hydrophilic property and geometrical modification of ZnO nanostructure. Two-phase boiling heat transfer was performed using ZnO nanostructured surfaces. ZnO nanocoating altered the important characteristics including surface roughness and wettability. Hydrophilic nature of the ZnO nanocoating generally enhanced the boiling heat transfer performance, resulting in higher heat transfer coefficient (HTC), higher critical heat flux (CHF), and lower surface superheat comparing to the bare surface. Octahedral SnO and porous NiO films, fabricated by a continuous flow microreactor system, were suggested as potential boiling surfaces for the high porosity and irregularity of their structures. / Graduation date: 2013

This doctoral study consists of three parts. In the first part, structural and electronic properties of Al_kTi_lNi_m (k+l+m=2,3) microclusters have been investigated by performing density functional theory (DFT) calculations within the B3LYP [which comprises the Becke-88 exchange functional and the correlation functional of Lee, Yang, and Parr] and the effective core potential (ECP) level. Dimers and trimers of the elements aluminum, titanium, and nickel, and their binary and ternary combinations have been studied in their ground states. The optimum geometries, possible dissociation channels, vibrational properties, and electronic structure of the clusters under study have been obtained. In the second part, after an empirical potential energy function (PEF) has been parametrized for the AlTiNi ternary system, stable (minimum-energy) structures of Al_kTi_lNi_m (k+l+m=4) microclusters have been determined by molecular dynamics (MD) simulations. The energetics of the microclusters in 1K and 300 K have been discussed. By performing, again, DFT calculations (within the B3LYP and ECP level), the possible dissociation channels and electronic properties of the obtained clusters have been calculated. In the last part, using the empirical PEF parametrized previously for the AlTiNi ternary system, minimum-energy structures of Al_nTi_nNi_n (n= 1-16) ternary alloy nanoparticles have been determined by performing MD simulations. The structural and energetic features of the obtained nanoparticles have been investigated.

Main group polycations and transition metal clusters had traditionally been synthesized via high-temperature routes by performing reactions in melts or by CTR, at room-temperature or lower temperature by using so-called superacid solvents, and at room-temperature in benzene–GaX3 media. Considering the major problems associated with higher temperature routes (e.g. long annealing time, risk of product decomposition, and low yield) and taking into account the toxicity of benzene and liquid SO2 in room-temperature or lower temperature synthesis, a soft and sustainable chemical approach has been developed, employing a Lewis-acidic IL [bmim]Cl/AlCl3. This new alternative reaction medium has proven to be an excellent solvent system for the single–step synthesis of main group polycations and transition metal clusters. X-ray diffraction and Raman spectroscopy have been used for the structural characterization of the isolated compounds. Physical properties and quantum chemical calculations of some of the compounds have also been carried out.

Fluorescence imaging has been increasingly relied upon as the method of choice for many biological and medical applications. As demands for more sensitive and higher resolution imaging are ever-increasing, it is critical that photostable, and robust fluorophores capable of delivering high emission rates are available. Fluorescent silver nanoclusters offer an attractive compromise between the photostability and brightness of quantum dots and the compact versatility of organic chromophores. They have been shown to be superior in many roles, including as single molecule fluorophores and bulk multiphoton biological staining agents. The two-photon absorption cross sections are several orders of magnitude larger than commercially-available dyes, and they have demonstrated superior photostability under high intensity irradiation. In addition to the endogenous effects of the cluster, its small size of only a few atoms renders it highly susceptible to surface and environmental effects, which manifests, for example, in the observed photoinduced charge transfer between the silver cluster and oligonucleotide. This state has been shown to be highly advantageous in imaging applications, as control of this state enables better control over the time-averaged emission rate of the molecule. The mechanism of charge transfer, and the possible means by which this state can be controlled will be also be investigated in this work.

Le fort engouement pour les nanostructures luminescentes provient de leurs comportements émissifs originaux et de leur potentiel comme briques élémentaires pour de futurs dispositifs photoniques et optoélectroniques. Dans cette thèse, nous nous sommes intéressés au contrôle de la couleur d’émission de nano-systèmes 1D organiques composés de deux types de luminophores. Dans une première partie, une famille peu connue de luminophores nanométriques a été étudiée: les clusters octaédriques de molybdène. Leur comportement photophysique et l’ensemble des fréquences des modes de vibration de l’entité Mo6Br14 ont été déterminés. Les spécificités de ces clusters ont été exploitées au sein de nanofils.Un premier type de nanofil coaxial synthétisé par méthode template a été conçu afin de séparer les deux types de luminophores. Les clusters (dans une matrice de PMMA) et le PPV ont été sélectionnés comme émetteurs rouge et vert respectivement, pour avoir une séparation spectrale. Le contrôle de la couleur sans transfert de charge ou d’énergie entre les deux luminophores a été validé par l’étude du comportement de photoluminescence stationnaire et résolue en temps, en accord avec un modèle phénoménologique. A l’opposé, des nanofils exploitant deux polymères conjugués fluorescents (PFO bleu, F8T2 vert) comme système donneur-accepteur ont été élaborés. Leur mélange ou leur séparation en géométrie cœur-gaine a permis d’explorer une nouvelle voie pour moduler les comportements excitoniques. Ces résultats montrent la versatilité des nanofils à base de polymère pour contrôler à l’échelle nanométrique les comportements d’émission de systèmes multi-luminophores. / Luminescent organic nanostructures are of great importance as building blocks in future miniaturized photonic and optoelectronic devices because these systems rely upon the ability to tune and get new optical characteristics. One-dimensional luminescent nanostructures are new and promising systems with complex morphologies now available. In this work, we particularly investigated the control and the tuning of the emitted color of two-luminophore based nanowires. In a first part, an unfamiliar family of luminophore has been investigated: the octahedral molybdenum clusters. The vibrational modes frequencies of Mo6Br14 cluster were fully determined, as well as their photophysical properties. The unique features of these clusters were exploited into nanowires.Then, using a template method, we designed coaxial nanowires allowing the spatial separation of the two luminophores. The transition metal clusters in a PMMA matrix and PPV were selected as red and green emitters, respectively, to achieve the spectral separation. Remarkably, it was found from time-resolved photoluminescence study and confirmed by a phenomenological model that any charge or energy transfer is involved in this system.Alternatively, coaxial and blend designs were used to investigate and possibly tune energy/charge transfers involved in the donor-acceptor behavior of two conjugated polymers: PFO (blue emitter) and F8T2 (green emitter). These results demonstrate the great versatility of polymer-based nanowires to finely control at the nanoscale the emission features of multi-luminophore materials.

The main purpose of this Thesis is the experimental characterization of the electronic and geometric structures of objects called clusters. A cluster consists of a finite group of bound atoms or molecules. Due to its finite size, it may present completely different properties than those of the isolated atom and the bulk. The clusters studied in this work are constituted by rare-gas atoms, organic molecules, and metal atoms. Intense cluster beams were created using either an adiabatic expansion source or a gas-aggregation source, and investigated by means of synchrotron radiation based photoelectron spectroscopy. The reports presented in this Thesis may be divided into three parts. The first one deals with results concerning homogeneous molecular clusters (benzene- and methyl-related clusters) highlighting how molecular properties, such as dipole moment and polarizability, influence the cluster structure. The second part focuses on studies of solvation processes in clusters. In particular, the adsorption of polar molecules on rare-gas clusters is studied. It is shown that the doping method, i.e. the technique used to expose clusters to molecules, and the fraction of polar molecules are important factors in determining the location of the molecules in the clusters. Finally, a summary of investigations performed on metal clusters is presented. The applicability of solid state models to analyse the cluster spectra is considered, and the differences between the atomic, cluster and solid electronic structures are discussed.

This thesis reports the theoretical investigations aimed at understanding the structure, stability and properties of a few inorganic compounds. The first chapter presents an introductory overview of the theories used to solve the questions addressed in the thesis. A brief discussion of the work is also presented here. The second chapter deals with electron reservoirs which have been one of the basic motifs of single-electron device. Mononuclear vinylidene complexes of type Mn(C5H4R’)(R” 2 PCH2CH2PR "2)= C = C(R1)(H) were synthesized and reported [Venkatesan et al, Organometallics 25, 5190 (2006)] as potential electron reservoirs capable of storing and releasing electrons in a reversible fashion. These compounds have been of great interest because their red-ox chemistry (reversible oxidative coupling and reductive decoupling) is governed by the C - C bond. However slow oxidation of the mononuclear vinylidene complexes leads to undesired product. In our model compound Mn(C5H5)(PH3)2 = C = C(R1)(H), we substituted the cyclopentadienyl moiety by isolobal dianionic dicarbollyl ligand Dcab2- (C2B9H2-11 ). This simple substitution could reduce the production of undesired product. Calculations of vertical detachment energy, thermodynamic feasibility and molecular orbital analysis showed that this substitution was thermodynamically feasible and led to easy oxidation and dimerization of the parent compound accompanied with better reversibility of the reaction. The effect of substituents (R = H,Me,Ph) on Cβ atom of our model system was also analyzed. The substituent on β carbon had a great effect on the stability and reactivity of these complexes. Our comparative study between Mn(C5H5)(PH3)2 = C = C(R)(H) and Mn(Dcab)(PH3)2 = C = C(R)(H)−1 (where R = H,Me,Ph) predicted the latter to be a more potential electronic reservoir. Gas-phase observations on MAl 4- (M = Li, Na, Cu) and Li3Al-4 coupled with computations led to the conclusion that Al42− [Boldyrev and Wang et al, Science 291, 859 (2001)] is “aromatic” while Al44- is “antiaromatic” [Boldyrev and Wang et al, Science 300, 522 (2003)]. It has been reported by Pati et al [J. Am. Chem. Soc. 125, 3496 (2005)] that co-ordination with a transition metal can stabilize the “antiaromatic” Al4Li4. In the first section of chapter three, it has been reported that Al4Li4 can also be stabilized by capping it with main group element like C and its isoelectronic species BH. Calculations of binding energy, nuclear independent chemical shift (NICS), energy decomposition analysis and molecular orbital analysis supported the capping induced stability, reduction of bond length alternation and increase of aromaticity of these BH/C capped Al4Li4 systems. The interaction between px and py orbitals of BH/C and the HOMO and LUMO of Al4Li4 was responsible for such stabilization. Calculations suggested that capping might introduce fluxionality in the molecule at room temperature. Al has valence electronic configuration of s2p1 and Al42− has been shown to have multiple aromaticity [Boldyrev and Wang et al, Science 291, 859 (2001)]. Analogy between electronic configuration s2pof Al and d1sof Sc/Y prompted us to explore the aromaticity of M42− clusters (M = Sc, Y ) which have been described in the second section of chapter three. Different geometries of M42− clusters (M = Sc, Y ) were explored, and the planar butterfly-like D2h geometry (two fused triangles) was found to be the most stable isomer. This is unlike the case of Al42− where D4h isomer was the most stable one as reported in the literature. In D2h geometry of M42− clusters (M = Sc, Y ), significant electron delocalization in each wing of the butterfly indicated fused d aromaticity. Atomization energy and chemical hardness supported the preference of D2h geometry over the D4h geometry. Molecular orbital analysis showed that the d-electrons were delocalized in each triangle of D2h geometry. Our interest in the search of new kinds of binuclear sandwich compounds led us to consider sandwiched metal dimers CB5H6M - MCB5H6 (M = Si, Ge, Sn) which are at the minima in the potential energy hypersurface with a characteristic M - M single bond. This work has been described in the first section of chapter four. The NBO analysis and the M - M distances ( ˚A) (2.3, 2.44 and 2.81 for M= Si, Ge, Sn respectively) indicated substantial M - M bonding. Consecutive substitution of two boron atoms in B7H7−2 by M (Si, Ge, Sn) and carbon respectively led to neutral MCB5H7, where M - H bond bent towards the carbon side of the five membered ring. Dehydrogenation of two MCB5H7 might lead to our desired CB5H6M - MCB5H6 where similar bending of M -M bond has been observed. The bending of M - M bond in CB5H6M -MCB5H6 was more than the M - H bending in MCB5H7. Molecular orbital analysis has been done to understand the bending. Larger M - M bending observed in CB5H6M - MCB5H6 in comparison to M - H bending observed in MCB5H7 was suspected to be favored by stabilization of one of the M - M π bonding MO’s. Preference of M to occupy the apex of pentagonal skeleton of MCB5H7 over its icosahedral analogue MCB10H11 has been observed. Structures of sandwiched binuclear L- M – M - L where M = Ti, Zr and L = Cp, C3B3H6 were also investigated as described in second section of chapter four. We found that these compounds having bent geometry with short M - M distance (1.87˚A for M=Ti and 2.29˚A for M=Zr) lie at the minima in the potential energy hypersurface. Bending from the linear geometry led to the stabilization of M - L antibonding interaction in L - M – M - L. Molecular orbital analysis, NBO calculations, Wiberg bond index and charge analysis suggested M2+ unit to be embedded in between two L’s in L - M – M - L. Molecules that have the ability to perform interesting mechanical motions have always been of great interest. Umbrella inversion of ammonia is one of the most interesting and well studied phenomena. This study has led to the development of the MASER. The possibility of inversion of the molecule C9H9−Li+ by the movement of Li+ through the C9H9−ring was studied earlier [Das et al, Chem. Phys. Lett. 365, 320 (2002)]. In the fifth chapter theoretical investigation on a B12 cluster has been reported, which could exhibit a through ring umbrella inversion. Calculations showed that a part of the molecule, consisting of a three membered boron ring could invert through the rest, viz., a nine membered boron ring. Using a simple model, the double well potential for the motion was calculated. The barrier for inversion was found to be 4.31 kcal/mol. The vibrational levels and tunneling splitting were calculated using this potential. It was found that the vibrational excitation to the v = 17 level caused large amplitude “inversion oscillation” of the molecule. After considering the tunneling effect, inversion rate at 298K was calculated by using transition state theory and was found to be 1.17 x 1010/s. Finally, in the last chapter the main results of the thesis have been summarized.

Main group polycations and transition metal clusters had traditionally been synthesized via high-temperature routes by performing reactions in melts or by CTR, at room-temperature or lower temperature by using so-called superacid solvents, and at room-temperature in benzene–GaX3 media. Considering the major problems associated with higher temperature routes (e.g. long annealing time, risk of product decomposition, and low yield) and taking into account the toxicity of benzene and liquid SO2 in room-temperature or lower temperature synthesis, a soft and sustainable chemical approach has been developed, employing a Lewis-acidic IL [bmim]Cl/AlCl3. This new alternative reaction medium has proven to be an excellent solvent system for the single–step synthesis of main group polycations and transition metal clusters. X-ray diffraction and Raman spectroscopy have been used for the structural characterization of the isolated compounds. Physical properties and quantum chemical calculations of some of the compounds have also been carried out.