Lithium bis(amido)cuprates are an important class of bimetallic base, which can chemo- and regioselectively metalate aromatic compounds, via directed ortho cupration (DoCu). This thesis begins with an introduction to aspects of the chemistry of organolithium compounds, group 11 organometallic compounds and their lithium 'ate complexes. Examples of such synergic bases are presented and the introduction is concluded with a discussion of lithium bis(amido)cuprate bases, which along with their silver congeners, are the subject of this dissertation. In general, syntheses involve the addition of a lithium amide to a group 11 salt, resulting in the formation of a lithium bis(amido)cuprate or argentate. Structurally focussed work commences with the use of new amide ligands to develop heteroleptic bis(amido)cuprate systems. The reaction of mixtures of lithium amides with CuBr provides a series of novel Lipshutz-type and Gilman cuprates. Interesting structural features are uncovered, which are rationalised in terms of altered steric demands in the newly introduced amide ligands in these systems. CuSCN and CuOCN are investigated as inexpensive and safer alternatives to CuCN in cuprate formation. In the solid state, a series of Lipshutz-type cuprates (TMP)2Cu(SCN)Li2(L) (L = Et2O, THF, THP) are revealed, whose molecular conformations are infuenced by the identity of the Lewis base. However, in benzene solution, in situ conversion of Lipshutz-type to Gilman cuprate is found to occur. Moving to the synthetic setting, derivatisation of chloropyridines is attempted and gives functionalised halopyridines in 51-71 % yield. CuOCN is found to behave quite differently when reacted in the same way as CuSCN, whereby X-ray crystallography reveals structures in which Cu-Li substitution is apparent. The unique reactivity of CuOCN is interpreted with the aid of multinuclear NMR spectroscopy. A new route to Lipshutz-type cuprates is explored by the synthesis of (TMP)2Cu(OCN)Li2(THF) from Gilman cuprate and LiOCN. This avoids Cu-Li substitution. Meanwhile, reaction of lithium N,N-diisopropylamide with CuOCN also avoids metal disorder, to give a novel lithium cuprate-lithium amide adduct. Further advances in our understanding of group 11 'ate complexes are made by introducing silver as a spectroscopically active nucleus in the lithium argentates (TMP)2AgLi and (TMP)2Ag(CN)Li2(THF). In the solid state, these parallel the structures known for Gilman cuprate (TMP)2CuLi and Lipshutz cuprate (TMP)2Cu(CN)Li2(THF), respectively. In solution, NMR spectroscopy reveals features consistent with retention of these structures. Lastly, the formation of mixed Cu-Li aggregates from combining TMPLi and TMPCu in aromatic solvent are investigated. Surprising reactivity is uncovered, in which the aromatic solvent is metalated and incorporated into mixed-metal aggregates. This thesis concludes with a summary of the findings and suggestions for future work, including how the findings presented herein may be transformed into practical improvements to cuprate systems. In particular, the possibility that Gilman cuprate may be activated towards the metalation of aromatic substrates by the addition of sub-stoichiometric or catalytic amounts of a lithium salt additive is explored.

Desde sua descoberta em meados do século XIX, os reagentes organometálicos têm sido amplamente utilizados na síntese orgânica, sendo bastante eficientes na formação de novas ligações carbono-carbono. A escolha do reagente organometálico ideal para determinada reação envolve conhecimentos relacionados à sua natureza química e à própria reatividade do substrato. O núcleo quinoxalínico apresenta um grande potencial para a química medicinal, estando presente em diversos produtos naturais e sintéticos que apresentam atividade biológica. Apesar disso, existem poucos estudos na literatura sobre a aplicação de reagentes organometálicos na funcionalização de quinoxalinas. A reação de metalação dirigida usando bases organometálicas é uma poderosa ferramenta para funcionalização de substratos aromáticos. Contudo, exemplos da aplicação desta estratégia na funcionalização de quinoxalinas são bastante raros. Assim, este trabalho teve como principal objetivo investigar a reatividade dos reagentes organometálicos derivados de zinco, magnésio e lítio em reações de metalação de quinoxalinas substituídas com grupos funcionais nas posições C-2 e C-6. Embora as quinoxalinas substituídas com grupos éster, amida e fenil na posição C-2 não tenham apresentado a reatividade esperada frente aos amidetos mistos de zinco e magnésio (TMPZnCl?MgCl2?LiCl, TMP2Zn?2MgCl2?2LiCl, TMPMgCl?LiCl e TMP2Mg?2LiCl), uma nova metodologia foi desenvolvida utilizando TMPLi como base, na presença de ZnCl2, que permitiu a preparação de vários derivados difuncionalizados em bons rendimentos, muitos dos quais de estrutura inédita. Quinoxalinas não substituídas nas posições C-2 e C-3 possuem reconhecida intolerância à presença de reagentes organometálicos, rendendo preferencialmente produtos de dimerização. Desta forma, uma contribuição importante deste trabalho foi o desenvolvimento de uma metodologia de funcionalização da quinoxalina de estrutura mais simples em micro-ondas, mediada pelo sistema TMPMgCl?LiCl/ZnCl2, que permitiu a preparação de diversos derivados arilados em rendimentos que variaram de razoáveis a bons (25 a 94%). Além disso, a metodologia mostrou-se bastante eficiente para síntese de ligantes bidentados de interesse para a área de catálise / Since its discovery in the mid-nineteenth century, organometallic reagents have been widely used in organic synthesis, being very effective in the formation of new carbon-carbon bonds. The choice of the ideal organometallic reagent for certain reaction involves knowledge related to their chemical nature and reactivity of the substrate itself. The quinoxaline core has great potential for medicinal chemistry and is present in many natural and synthetic products presenting biological activity. Nevertheless, there are few studies on the application of organometallic reagents in the functionalization of quinoxalines. The directed metalation reaction using metal bases is powerful synthetic tool for functionalization of aromatic substrates. However, examples on the application of such strategy to the functionalization of of quinoxalines are very rare. This work mainly aimed to investigate the reactivity of organometallic reagents of zinc, magnesium and lithium in the metalation of quinoxalines substituted with functional groups at the C-2 and C-6 positions. Although C-2 substituted quinoxalines with ester and amide groups have not shown the expected reactivity with mixed amides of zinc, magnesium and lithium (TMPZnCl?MgCl2?LiCl, TMP2Zn?2MgCl2?2LiCl, TMPMgCl?LiCl and TMP2Mg?2LiCl), a new methodology was developed using TMPLi as a base in the presence of ZnCl2, allowing the preparation of various difuncionalized derivatives in good yields, many of them new compounds. Quinoxalines unsubstituted at the C-2 and C-3 positions have recognized intolerance to the presence of organometallic reagents, preferably yielding dimerization products. Thus, an important contribution of this work was the development of a functionalization methodology of the simplest quinoxaline in microwave mediated by the TMPMgCl?LiCl/ZnCl2, allowing the preparation of various arylated derivatives in yields ranging from reasonable to good (25 to 94%). Furthermore, the methodology could be applied to the synthesis of bidentate ligands of interest for catalysis

Electrophilic aromatic substitution (EAS) and directed ortho-metalation (DoM) involve the direct substitution of an arene hydrogen. A major drawback involving EAS is the necessity for harsh forcing conditions for the reaction to proceed. Catalysts such as Lewis acids FeBr3 and AICI3 for the introduction of halogens and acyl groups, respectively, are each highly toxic and corrosive. Textbook preparations of aryl iodides classicaly involved the use of iodine and nitric acid. This approach affords only modest yields and does not provide regiospecific substitution of most substituted aromatics because most contain ortho/para directors which afford mixtures of isomers. The novelty of our procedure for the synthesis of the iodinated aromatics is twofold in that regiospecific para-iodination is observed and hydrocarbon media are utilized. Hydrocarbon media are less hazardous and greener than media used for halogenations reported in literature. This procedure always yields derivatives regiospecifically substituted para to an electron donating substituent. Moreover, this method eliminates the need to use hazardous oxidative catalysts. DoM is a reaction regiospecifically substitute an arene hydrogen at the ortho position. The media used in DoM reactions are less hazardous than those required for a variety of EAS reactions. The only problem for this reaction is use of extremely strong bases, alkyllithium reagents, which are known to be air and water sensitive. However, the DoM reaction does eliminate the need to separate ortho/para isomer mixtures so that only a single product is generated. The metalation yields predominantly products regiospecifically substituted ortho-to the direcing metalating group (DMG). With our deficiency catalysis concept and subsequent purificaion methods, relatively pure ortho-lithiated intermediates have been prepared. The study of catalysts/promoters on the derivatization of these intermediates is anticipated to be extremely insightful. For this study, we have shown that highly selective, efficient ortho-lithiation can be achieved by deficiency catalysis utilizing n-BuLi as the only strong metalating base.

Dans un contexte industriel où les réactions d'oxydation sont réalisées dans des conditions qui ne satisfont pas toujours les principes de la chimie verte, notre groupe étudie des catalyseurs de structure N-hydroxyphtalimide (NHPI), pour l'oxydation aérobie de substrats organiques variés dans des conditions douces. Dans le but d'obtenir des catalyseurs plus actifs, deux familles d'analogues hautement substitués sur le noyau phtalimide ont été préparées, suivant deux nouvelles méthodologies de synthèse. La première consiste en la bis-ortho-métallation / silylation d'acides ortho-phtaliques non protégés, pour un accès très rapide à des analogues silylés du NHPI. Les premiers tests en catalyse d'oxydation aérobie montrent une influence intéressante des groupements silyles sur la stabilité de l'espèce active, via leur encombrement stérique, cela permettant une amélioration de l'activité catalytique. La seconde stratégie inclut une cyclotrimérisation [2+2+2] totalement intramoléculaire d'ène-diyne diesters, pour la construction d'un squelette bis-ortho-lactone pentacyclique innovant. Ces intermédiaires sont aisément transformés en 3,6-bis(2-hydroxyphényl)-4,5-diarylphtalimides, ces composés présentant une symétrie C2 et deux axes d'atropoisomérie. Le dédoublement des énantiomères a été effectué, dans la perspective d'obtenir des catalyseurs d'oxydation aérobie potentiellement énantiosélectifs. / In the chemical industry, oxidation reactions are not often performed in green chemistry conditions. Our group has been studying N-hydroxyphthalimides (NHPI) catalysts for the aerobic oxidation of various organic substrates in mild conditions. In order to obtain more active catalysts, two families of analogs, showing high substitution on the phthalimide core, have been prepared, following two new synthetic methodologies. The first one consists of the bis-ortho-metalation / silylation of unprotected ortho-phthalic acids, for the efficient access to silylated analogs of NHPI. Preliminary tests in aerobic oxidation catalysis show an interesting influence of the bulkiness of the silyl groups towards the active species, because of increases in catalytic activities. The second strategy includes a totally intramolecular [2+2+2] cyclotrimerization of ene-diyne diesters, affording an innovative pentacyclic bis-ortho-lactone scaffold. These intermediates are easily converted to 3,6-bis(2-hydroxyphenyl)-4,5-diarylphthalimides, which present C2 symmetry and two atropoisomeric axis. The resolution of both enantiomers has been performed, in order to access aerobic oxidation catalysts with potent enantioselective activity.

Dans une première partie, la protection des phénols et des pyridinols a été étudiée. Une nouvelle méthode de tetrahydropyranylation a été développée via la réaction de Mitsunobu. Les pyridinols et des phénols ont ainsi été protégés sous forme d'acétal. Cette méthode est sélective d'un phénol vis-à-vis d'un alcool ou d'une amine. La métallation régiosélective des pyridinols 3- et 4- OTHP a été ensuite réalisée. La fonctionnalisation de ces composés, via des réactions successives de métallation et une hydrolyse acide, a permis la synthèse de pyridinols difonctionnalisés "one-pot". Dans le but d'étudier le pouvoir ortho-directeur du groupe O-THP lors de la réaction de métallation, des essais de déprotonations compétitives ont été réalisés avec un pyridinol protégé par un OMe ou une carbamate. Dans une seconde partie, nous avons étudié une synthèse courte et efficace de la (-)-lentiginosine et de ses épimères à partir de la 2-bromopyridine avec de bons rendements. Nous avons synthétisé la (-)-lentiginosine et deux de ses épimères avec de bons rendements. Au cours de cette synthèse, nous avons développé une nouvelle méthodologie de quaternarisation de pyridine via la réaction de Mitsunobu. / We report that the tetrahydropyranylation of pyridinols and phenols, exhibiting especially very low nucleophilicities, can be achieved by means of Mitsunobu reaction with 2-hydroxy-tetrahydropyran. We studied the regioselective deprotonation of 3- an 4-(tetrahdropyran-2-yloxy)pyridines with n-butyllithium. Trapping the lithiated species with various electrophiles afforded functionalized pyridines in good yields. A one-pot procedure also allowed the double fuctionalization at C4 and C2 in the case of 3-O-THP-pyridine. The ortho-metallating ability of this group was examined in comparison with other well-known oxygen-based ortho-directing groups. A four-step synthesis of (-)-lentiginosine and its epimers is described starting from 2-bromopyridine. The key step consisted of a quaternarization of a fully unprotected pyridinium-polyol unit using Mitsunobu methodology. We have demonstrated that the Mitsunobu reaction is viable as a new methodology for the N-alkylation of pyridine and for the formation of bridgehead azabicyclic compounds from pyridine derivatives

No description available.

Nos últimos anos, houve um aumento considerável dos estudos envolvendo o núcleo indolizínico, um entre os milhares de heterociclos existentes, sendo 2012 o ano de maior destaque, com 102 publicações. Esse crescente interesse é atribuído principalmente à busca por novos substratos funcionalizados que apresentem características medicinais e biológicas. Todavia, as indolizinas ainda são pouco exploradas se comparadas a outros núcleos heterocíclicos, principalmente no que diz respeito a sua funcionalização por emprego de reagentes organometálicos. Desta forma, o objeto deste trabalho foi o estudo da reatividade de diversas indolizinas perante diferentes organometálicos, por meio de reações de metalação dirigida, troca iodo-magnésio e acoplamento cruzado de Negishi com o intuito de construir indolizinas polifuncionalizadas. Assim sendo, inicialmente foi estudada a reatividade de bases organometálicas diante de algumas indolizinas e as reações de seus intermediários organometálicos com uma variedade de eletrófilos. Para tanto, as indolizinas foram divididas por posicionamento das funcionalizações, ou seja, indolizinas funcionalizadas na posição 1 do anel (-CO2Et, -CO2tBu e CN), indolizinas funcionalizadas na posição 2 do anel (-CO2Et, CN) e indolizinas funcionalizadas nas posições 1 e 3 do anel. Na sequência, foram estudadas as reações de troca iodo-magnésio diante das indolizinas funcionalizadas nas posições 1 e 3 e, por último, as reações de metalação dirigida com os substratos 2-arilindolizínicos seguidas por reações de acoplamento cruzado de Negishi. As moléculas sintetizadas nesta última etapa, por terem apresentado fortes propriedades fluorescentes, foram submetidas a um estudo minucioso sobre essas características. Essas estratégias sintéticas desenvolvidas no presente trabalho foram altamente eficientes, permitindo o preparo de uma série de compostos com grande diversidade estrutural, sendo sintetizadas 64 indolizinas polifuncionalizadas inéditas e 11 indolizinas polifuncionalizadas já descritas na literatura por meio de outras metodologias, com rendimentos variando de 15% a 87%. / In recent years, there has been a considerable increase in studies involving the indolizinic core, one of thousands of existing heterocycles, with 2012 being the most outstanding year, with 102 publications. This growing interest is mainly attributed to the search for new functionalized substrates that have medicinal and biological characteristics. However, indolizines are unexplored when compared to other heterocycles, particularly regarding their functionalization with the use of organometallic reagents. Thus, the object of this work was the reactivity study of several indolizines with different organometallics by means of directed metalation reactions, iodine-magnesium exchange and Negishi cross-coupling, in order to build functionalized poly-indolizines. Therefore, initially, it was investigated the reactivity of organometallic bases upon some indolizines and the reactions of their organometallic intermediates with a variety of electrophiles. To achieve this, indolizines were divided according to their function position, i.e. indolizines functionalized at position 1 of the ring (-CO2Et, CN and -CO2tBu), indolizines functionalized at position 2 of the ring (-CO2Et, CN) and functionalized at positions 1 and 3 of the ring. Furthermore, the iodine-magnesium exchange reactions of indolizines functionalized at positions 1 and 3 were studied and, finally, directed metalation reactions with 2-aryl indolizinic substrates followed by Negishi cross-coupling reactions were performed. The ultimate products of such reactions showed strong fluorescent properties and, for this reason, were subject of detailed studies on these characteristics. The synthetic strategies developed in this research were highly efficient, enabling the preparation of a large number of compounds with structural diversity, having been synthesized 64 novel poly-functionalized indolizines and 11 known poly-functionalized indolizines, with yields ranging from 15% to 87%.

O núcleo quinolínico constitui uma das classes de heterociclos nitrogenados de maior destaque, pois são amplamente encontradas em produtos naturais, além de comporem a lista dos considerados esqueletos \"privilegiados\", relacionados com as diversas classes terapêuticas como: anticâncer, anticolinesterásicos, antimaláricos, etc. Diante das abordagens sintéticas de funcionalização de anéis heteroaromáticos, o uso de espécies organometálicas ocupa, hoje, uma posição central na química orgânica sintética, principalmente na formação de novas ligações carbono-carbono. Dessa forma, o presente trabalho explorou essencialmente a reatividade de quinolinas frente à reagentes organometálicos tais como alquil-lítio, amidetos de lítio, turbo-Grignard e amidetos mistos de magnésio e lítio. Inicialmente, foi estudada a funcionalização da 4,7- dicloroquinolina através da reação de metalação dirigida frente aos diferentes reagentes disponíveis. Em seguida, foi desenvolvida uma metodologia de troca iodo-magnésio para a 7-cloro-4-iodoquinolina visando a obtenção de derivados funcionalizados na posição C4 bastante estratégica para atividade antimalárica. Neste estudo foi utilizado o reagente turbo-Grignard para etapa de troca, seguida da reação com eletrófilos. Os compostos obtidos tiveram sua atividade antimalárica avaliada pelo grupo do Dr. Adrian M. Pohlit do Instituto Nacional de Pesquisas da Amazônia (INPA). A metodologia de troca iodomagnésio do turbo-Grignard frente à 7-cloro-4-iodoquinolina também foi aplicada para a obtenção de outros derivados por reações de acoplamento cruzado de Negishi, e na rota sintética de um híbrido molecular planejado com potencial atividade antimalárica. Além disso, foi estudada a reação de troca halogênio-metal da 3-bromoquinolina frente a reagentes de lítio seguida da reação com aldeídos. Por fim, algumas das estruturas sintetizadas também tiveram avaliação da atividade anticâncer realizada pelo grupo da Prof. Dra. Letícia Lotufo da Universidade Federal do Ceará. Portanto, foram demonstradas neste trabalho estratégias simples e eficientes utilizando reagentes organometálicos para funcionalização de quinolinas de interesse sintético e medicinal. / The quinoline unit is one of most important nitrogen heterocycle classes since it is found in a large number of natural products. Moreover, it is considered a privileged scaffold presenting a variety of pharmacologic activities such as: anti-cancer, anticholinesterase, antimalarial and others. Among the available aromatic heterocycle functionalization approaches, the organometallic chemistry have a prominent position mainly on the construction of new carbon-carbon bonds. In this context, this work have explored the quinoline reactivity against organometallic reagents like alkyl-lithium, lithium amides, turbo-Grignard and magnesium lithium amides. Initially, the functionalization of 4,7- dichloroquinoline was studied through the direct metalation reaction of the substrate with several available organometallic reagents. Afterwards, a new iodo-magnesium exchange methodology for the 7-chloro-4-iodoquinoline was developed in order to obtain C-4 functionalized quinoline derivatives. The turbo-Grignard was the reagent of choice in iodo-magnesium exchange reactions that were subsequently reacted with different electrophiles. The antimalarial activity of the compounds obtained in this study was evaluated by Dr. Adrian M. Pohlit group of National Institute of Amazon Research (INPA). The developed iodo-magnesium exchange methodology was further applied in Negishi cross-coupling reactions and on a synthetic study of a planned molecular hybrid with potential antimalarial activity. In addition, the halogen-metal exchange reaction on 3-bromoquinoline was studied using alkyl-lithium reagents with subsequent reaction with aldehydes. Finally, the anti-cancer activity of some of structures obtained in this work was evaluated by Prof. Dra Letícia Lotufo group of Federal University of Ceará

This thesis describes the development of new synthetic methodologies for preparation of bioactive interesting compounds, e.g. substituted pyridines, piperidines or piparazines. Thesecompounds are synthesized from commercially available, cheap and easily prepared reagents, videlicet the reaction between Grignard reagents and heterocyclic N-oxides.  The first part of this thesis deals with an improvement for synthesis of dienal-oximes and substituted pyridines. This was accomplished by a rapid addition of Grignard reagents to pyridine N-oxides at rt. yielding a diverse set of substituted dienal-oximes. During these studies, it was observed that the obtained dienal-oxmies are prone to ring-close upon heating. By taking advantage of this, a practical synthesis of substituted pyridines was developed. In the second part, an ortho-metalation of pyridine N-oxides using Grignard reagents is discussed. The method can be used for incorporation of a range of different electrophiles, including aldehydes, ketones and halogens. Furthermore, the importance for incorporation of halogens are exemplified through a Suzuki–Miyaura coupling reaction of 2-iodo pyridine N-oxides and different boronic acids. Later it was discovered that if the reaction temperature is kept below -20 °C, the undesired ringopening can be avoided. Thus, the synthesis of 2,3-dihydropyridine N-oxide, by reacting Grignard reagents with pyridine N-oxides at -40 °C followed by sequential addition of aldehyde or ketone, was accomplished. The reaction provides complete regio- and stereoselectivity yielding trans-2,3-dihydropyridine N-oxides in good yields. These intermediate products could then be used for synthesis of either substituted piperidines, by reduction, or reacted in a Diels–Alder cycloaddtion to give the aza-bicyclo compound. In the last part of this thesis, the discovered reactivity for pyridine N-oxides, is applied on pyrazine N-oxides in effort to synthesize substituted piperazines. These substances are obtained by the reaction of Grignard reagents and pyrazine N-oxides at -78 °C followed by reduction and protection, using a one-pot procedure. The product, a protected piperazine, that easily can be orthogonally deprotected, allowing synthetic modifications at either nitrogens in a fast and step efficient manner. Finally, an enantioselective procedure using a combination of PhMgCl and (-)-sparteine is discussed, giving opportunity for a stereoselective synthesis of substituted piperazines.

The investigation and control of molecular properties is currently a dynamic research field. Here I present molecular level studies of porphyrin molecules adsorbed on metal surfaces via Low Temperature Scanning Tunneling Microscopy/Spectroscopy (STM/STS), supported by complementary X-ray absorption experiments. Intermolecular and molecule-surface interactions of tetrapyrdil porphyrin (TPyP) on Ag(111) and Cu(111) were investigated. TPyP self-assembles on Ag(111) over a wide sample temperature range into large, highly-ordered 2D chiral domains. By contrast, adsorption of TPyP on the more reactive Cu(111) leads to temperature dependent assemblies, governed decisively by the strong substrate influence. The increased metal-surface interactions on Cu(111) are accompanied by a conformational distortion of the porphyrin macrocycle. The TPyP’s pyridil groups were coordinated with single iron molecules, forming metal-organic complexes. Furthermore, the porphyrin’s macrocycle was metalated by exposing a layer of well-ordered TPyP to an iron atom beam, demonstrating a novel approach towards the fabrication of metallo-tetraaryl porphyrins performed in two dimensions under ultrahigh vacuum conditions. This method was similarly used to form lanthanideporphyrinates by coordinating tetraphenyl porphyrin (TPP) macrocycles with cerium. The influence of the metal center on the porphyrins’ electronic structure was investigated via STS for TPP, TPyP,Fe−TPyP, Fe−TPP, Ce−TPP, and Co−TPP, whereby the inhomogenous electron density distribution associated with individual frontier orbitals were imaged via dI/dV mapping. The symmetry and form of the molecular orbitals could be directly correlated to the saddle-shaped conformational adaptation for the case of Co −TPP.