The aim of this study is to analysis, investigate and find out the solutions for the problems associated with the implementations of antennas RFID Reader and Tag for various applications. In particular, the efficiency of the RFID reader antenna and the detection range of the RFID tag antenna, subject to a small and compact antenna's design configuration have been studied. The present work has been addressed directly to reduce the cost, size and increase the detection range and communication reliability of the RFID framework antennas. Furthermore, the modelling concept of RFID passive tags mounted on various materials including the novel design of RFID reader antenna using Genetic Algorithm (GA) are considered and discussed to maintain reliable and efficient antenna radiation performances. The main benefit of applying GA is to provide fast, accurate and reliable solutions of antenna's structure. Therefore, the GA has been successfully employed to design examples: meander-line, two linear cross elements and compact Helical- Spiral antennas. In addition, a hybrid method to model the human body interaction with RFID tag antenna operating at 900MHz has been studied. The near field distribution and the radiation pattern together with the statistical distribution of the radiation efficiency and the absorbed power in terms of cumulative distribution functions for different orientation and location of RFID's tag antenna on the human body have been demonstrated. Several tag antennas wi th symmetrical and unsymmetrical structure configurations operating in the European UHF band 850-950 MHz have been fabricated and tested. . The measured and simulated results have been found to be in a good agreement with reasonable impedance matching to the typical input impedance of an RFID integrated circuit chip and nominal power gain and radiation patterns.

In this dissertation, a Method of Moments (MoM) Volume Integral Equation (VIE)-based modeling approach suitable for a patch or slot antenna on a thin finite dielectric substrate is developed and validated. Two new key features of this method are the use of proper dielectric basis functions and proper VIE conditioning, close to the metal surface, where the surface boundary condition of the zero tangential-component must be extended into adjacent tetrahedra. The extended boundary condition is the exact result for the piecewise-constant dielectric basis functions. The latter operation allows one to achieve a good accuracy with one layer of tetrahedra for a thin dielectric substrate and thereby greatly reduces computational cost. The use of low-order basis functions also implies the use of low-order integration schemes and faster filling of the impedance matrix. For some common patch/slot antennas, the VIE-based modeling approach is found to give an error of about 1% or less in the resonant frequency for one-layer tetrahedral meshes with a relatively small number of unknowns. This error is obtained by comparison with fine finite- element method (FEM) simulations, or with measurements, or with the analytical mode matching approach. Hence it is competitive with both the method of moments surface integral equation approach and with the FEM approach for the printed antennas on thin dielectric substrates. Along with the MoM development, the dissertation also presents the models and design procedures for a number of practical antenna configurations. They in particular include: i. a compact linearly polarized broadband planar inverted-F antenna (PIFA); ii. a circularly polarized turnstile bowtie antenna. Both the antennas are designed to operate in the low UHF band and used for indoor positioning/indoor geolocation.

L émergence des environnements omniprésents pose un nouveau défi aux systèmes informatiques. Les intergiciels asynchrones (Message-Oriented Middleware, MOM) sont reconnus comme étant la solution la plus apte à répondre aux besoins de passage à grande échelle, de flexibilité, et d' hétérogénéité des nouvelles applications distribuées. Mais l'implémentation des intergiciels asynchrones actuels reste souvent figée quels que soient les sites d'exécution et l'application (les applications) l'utilisant et sont peu voire pas configurables. Cette thèse s'intéresse à la configuration et au déploiement des intergiciels asynchrones sur système hétérogène à grande échelle. Elle vise la définition d'un modèle d'intergiciel asynchrone configurable permettant une configuration statique et à l'exécution. Elle a pour objectif d'associer les nombreux travaux dans le domaine de l'asynchrone qui ont mené à la définition des modèles de communication asynchrones et les réflexions menées dans les intergiciels synchrones autour des nouveaux besoins de configuration et d'adaptabilité. La synthèse de tous nos travaux nous a mené à la création de DREAM (Dynamic REflective Asynchronous Middleware), un intergiciel asynchrone adaptable. Les mécanismes de contrôles fournis par Dream ainsi que son architecture permettent de réaliser une configuration en se basant sur les besoins applicatifs et les contraintes imposées par le système. Nous validons notre prototype par l'implémentation d'un service à évènement à base d'agents dans lequel nous utilisons les capacités d'adaptation de DREAM pour ajouter de nouvelles fonctionnalités.

El Método de los Momentos (MoM) ha sido ampliamente utilizado en las últimas décadas para la discretización y la solución de las formulaciones de ecuación integral que aparecen en muchos problemas electromagnéticos de antenas y dispersión. Las más utilizadas de dichas formulaciones son la Ecuación Integral de Campo Eléctrico (EFIE), la Ecuación Integral de Campo Magnético (MFIE) y la Ecuación Integral de Campo Combinada (CFIE), que no es más que una combinación lineal de las dos anteriores.Las formulaciones MFIE y CFIE son válidas únicamente para objetos cerrados y necesitan tratar la integración de núcleos con singularidades de orden superior al de la EFIE. La falta de técnicas eficientes y precisas para el cálculo de dichas integrales singulares a llevado a imprecisiones en los resultados. Consecuentemente, su uso se ha visto restringido a propósitos puramente académicos, incluso cuando tienen una velocidad de convergencia muy superior cuando son resuelto iterativamente, debido a su excelente número de condicionamiento.En general, la principal desventaja del MoM es el alto coste de su construcción, almacenamiento y solución teniendo en cuenta que es inevitablemente un sistema denso, que crece con el tamaño eléctrico del objeto a analizar. Por tanto, un gran número de métodos han sido desarrollados para su compresión y solución. Sin embargo, muchos de ellos son absolutamente dependientes del núcleo de la ecuación integral, necesitando de una reformulación completa para cada núcleo, en caso de que sea posible.Esta tesis presenta nuevos enfoques o métodos para acelerar y incrementar la precisión de ecuaciones integrales discretizadas con el Método de los Momentos (MoM) en electromagnetismo computacional.En primer lugar, un nuevo método iterativo rápido, el Multilevel Adaptive Cross Approximation (MLACA), ha sido desarrollado para acelerar la solución del sistema lineal del MoM. En la búsqueda por un esquema de propósito general, el MLACA es un método independiente del núcleo de la ecuación integral y es puramente algebraico. Mejora simultáneamente la eficiencia y la compresión con respecto a su versión mono-nivel, el ACA, ya existente. Por tanto, representa una excelente alternativa para la solución del sistema del MoM de problemas electromagnéticos de gran escala.En segundo lugar, el Direct Evaluation Method, que ha provado ser la referencia principal en términos de eficiencia y precisión, es extendido para superar el cálculo del desafío que suponen las integrales hiper-singulares 4-D que aparecen en la formulación de Ecuación Integral de Campo Magnético (MFIE) así como en la de Ecuación Integral de Campo Combinada (CFIE). La máxima precisión asequible -precisión de máquina se obtiene en un tiempo más que razonable, sobrepasando a cualquier otra técnica existente en la bibliografía.En tercer lugar, las integrales hiper-singulares mencionadas anteriormente se convierten en casi-singulares cuando los elementos discretizados están muy próximo pero sin llegar a tocarse. Se muestra como las reglas de integración tradicionales tampoco convergen adecuadamente en este caso y se propone una posible solución, basada en reglas de integración más sofisticadas, como la Double Exponential y la Gauss-Laguerre.Finalmente, un esfuerzo en facilitar el uso de cualquier programa de simulación de antenas basado en el MoM ha llevado al desarrollo de un modelo matemático general de un puerto de excitación en el espacio discretizado. Con este nuevo modelo, ya no es necesaria la adaptación de los lados del mallado al puerto en cuestión. / The Method of Moments (MoM) has been widely used during the last decades for the discretization and the solution of integral equation formulations appearing in several electromagnetic antenna and scattering problems. The most utilized of these formulations are the Electric Field Integral Equation (EFIE), the Magnetic Field Integral Equation (MFIE) and the Combined Field Integral Equation (CFIE), which is a linear combination of the other two. The MFIE and CFIE formulations are only valid for closed objects and need to deal with the integration of singular kernels with singularities of higher order than the EFIE. The lack of efficient and accurate techniques for the computation of these singular integrals has led to inaccuracies in the results. Consequently, their use has been mainly restricted to academic purposes, even having a much better convergence rate when solved iteratively, due to their excellent conditioning number. In general, the main drawback of the MoM is the costly construction, storage and solution considering the unavoidable dense linear system, which grows with the electrical size of the object to analyze. Consequently, a wide range of fast methods have been developed for its compression and solution. Most of them, though, are absolutely dependent on the kernel of the integral equation, claiming for a complete re-formulation, if possible, for each new kernel. This thesis dissertation presents new approaches to accelerate or increase the accuracy of integral equations discretized by the Method of Moments (MoM) in computational electromagnetics. Firstly, a novel fast iterative solver, the Multilevel Adaptive Cross Approximation (MLACA), has been developed for accelerating the solution of the MoM linear system. In the quest for a general-purpose scheme, the MLACA is a method independent of the kernel of the integral equation and is purely algebraic. It improves both efficiency and compression rate with respect to the previously existing single-level version, the ACA. Therefore, it represents an excellent alternative for the solution of the MoM system of large-scale electromagnetic problems. Secondly, the direct evaluation method, which has proved to be the main reference in terms of efficiency and accuracy, is extended to overcome the computation of the challenging 4-D hyper-singular integrals arising in the Magnetic Field Integral Equation (MFIE) and Combined Field Integral Equation (CFIE) formulations. The maximum affordable accuracy --machine precision-- is obtained in a more than reasonable computation time, surpassing any other existing technique in the literature. Thirdly, the aforementioned hyper-singular integrals become near-singular when the discretized elements are very closely placed but not touching. It is shown how traditional integration rules fail to converge also in this case, and a possible solution based on more sophisticated integration rules, like the Double Exponential and the Gauss-Laguerre, is proposed. Finally, an effort to facilitate the usability of any antenna simulation software based on the MoM has led to the development of a general mathematical model of an excitation port in the discretized space. With this new model, it is no longer necessary to adapt the mesh edges to the port.

Regulation of transcription initiation is the major determining event employed by the cell to control gene expression and subsequent cellular processes. The weak promoters, with low basal transcription activities, are activated by activators. Bacteriophage Mu mom gene, which encodes a unique DNA modification function, is detrimental to cell when expressed early or in large quantities. Mu has designed a complex, well-controlled and orchestrated regulatory network for mom expression to ensure its synthesis only in late lytic cycle. The phage encoded transcription activator protein C activates the gene by promoter unwinding of the DNA and thereby recruiting of RNAP to the promoter. C protein functions as a dimer for DNA binding and transcription activation. Mutagenesis and chemical crosslinking studies revealed that the leucine zipper motif, and not the coiled coil motif in the N terminal region, is responsible for C dimerization. The DNA binding domain of C is a HTH domain which is preceded by the leucine zipper motif. The C protein is one of the few examples in the bacterial proteins containing both leucine zipper and HTH domain. Most of the transcription activators either influence initial binding of RNAP or conversion of closed to open complex formation. Very few activators act at subsequent steps of promoter-polymerase interaction. Earlier studies showed high level of transcription from a mutant mom promoter, tin7. Addition of C further increased transcription from Ptin7 indicating that C may have a role beyond polymerase recruitment. Each steps of transcription initiation have been dissected using the Ptin7 and a positive control (pc) mutant of C, R105D. The results revealed multi-step transcription activation mechanism for C protein at Pmom. C recruits RNAP at Pmom and subsequently increases the productive RNAP-promoter complex and enhances promoter clearance. To further understand the C mediated transactivation mechanism, interaction between C and RNAP was assessed. C interacts with holo and core RNAP only in presence of DNA. Positive control mutants of C, F95A and R015D, were found to be compromised in RNAP interactions. These mutants were efficient in RNAP recruitment to Pmom but do not enhance promoter clearance. Trypsin cleavage protection experiment indicated that probably C protein interacts with b¢ subunit of RNAP. Interaction between C and RNAP appears to enhance the formation of productive RNAP-promoter complex leading to promoter clearance. The connection between activator-polymerase interaction and transcription activation is well documented where the recruitment of RNAP is influenced. In case of activators acting at post recruitment steps of initiation, the role of polymerase contact is poorly understood. Our study shows that activator-polymerase interaction can lead to increased promoter clearance at Pmom by overcoming abortive initiation.

This thesis introduces efficient numerical techniques for the analysis of novel electromagnetic metamaterials. The modelling is based on a Method of Moments modal analysis in conjunction with an interpolation scheme, which significantly accelerates the computations. Triangular basis functions are used that allow for modelling of arbitrary shaped metallic elements. Unlike the conventional methods, impedance interpolation is applied to derive the dispersion characteristics of planar periodic structures. With these techniques, the plane wave and the surface wave responses of fractal structures have been studied by means of transmission coefficients and dispersion diagrams. The multiband properties and the compactness of the proposed structures are presented. Based on this method, novel planar left-handed metamaterials are also proposed. Verifications of the left-handedness are presented by means of full wave simulation of finite planar arrays using commercial software and lab measurement. The structures are simple, readily scalable to higher frequencies and compatible with low-cost fabrication techniques.

Cette thèse porte sur la modélisation et l’analyse de la propagation électromagnétique dans un milieu forestier dans les bandes VHF et UHF. L’objectif principal est le développement d’un modèle numérique "full-wave" tridimensionnel de diffusion par la forêt permettant de caractériser l’interaction d’une onde électromagnétique avec un milieu forestier. Un tel modèle s’avère, actuellement, un outil indispensable à l’analyse des mesures radar pour l’étude des paramètres caractéristiques de la forêt tels que la biomasse forestière, la hauteur des arbres et leur densité. La complexité numérique de ce modèle a limité son domaine d’application à de petites parcelles de forêt et aux basses fréquences. Pour pouvoir traiter de larges zones forestières tout en montant en fréquence, et s’approcher ainsi des besoins et exigences des utilisateurs potentiels de notre modèle, nous avons intégré à ce modèle une méthode numérique efficace dédiée à l’analyse de larges problèmes électromagnétiques. La méthode en question,connue sous le nom de Characteristic Basis Function Method (CBFM) était récemment développée dans le laboratoire de Communication et Electromagnétisme de l’université PennState dirigé par le Professeur Mittra. Après une optimisation et une adaptation au problème d’intérêt, la CBFM réalise d’excellentes performances et nous permet une diminution considérable du temps de calcul et des besoins en espace mémoire sans pour autant dégrader la qualité des résultats obtenus ou altérer la fidélité du modèle à la réalité du problème électromagnétique traité. / A 3-D full-wave model, based on the integral representation of the electric field and dedicatedto the analysis of bi-static scattering mechanisms by a forest in the VHF and UHF bands wasefficiently enhanced. In order to overcome the limitation of a previous 3D model to small simulationsscenes and low frequencies, we have developed, during this research work, a new model using basis functionsadapted to the problem of interest, in the context of the Characteristic Basis Function Method(CBFM) and we investigated the suitability of this direct method for computing the electromagneticfields inside and outside three-dimensional dielectric objects representing the tree trunks and branches.The CBFM has shown great performances, when applied to the forest scattering modeling, both interms of CPU time and memory resources needed. Once properly set, the CBFM-E is so efficient thatit is able to treat in few minutes electromagnetic problems totally intractable with the classical MoM.Consequently, we have developed a powerful 3D forest electromagnetic scattering tool which allows ustoday to compute large forest electromagnetic problems in few minutes without worrying about theaccuracy of the solution. On the other hand, we have demonstrated the efficiency and accuracy of theCBFM-E when applied to 3D dielectric objects in the context of the electric volumetric integral equation,and have consolidated thus its leading position in the computational electromagnetics, especiallyagainst the iterative solvers based numerical methods.

The infrared and millimeter-wave portions of the spectrum both have their advantages for development of imaging systems. Because of the difference in wavelengths, infrared imagers offer inherently high resolution, while millimeter-wave systems have better penetration through atmospheric aerosols such as fog and smoke. Shared-aperture imaging systems employing a common focal-plane array that responds to both wavebands are desirable from the viewpoint of overall size and weight. We have developed antenna-coupled sensors that respond simultaneously at 30 THz and at 94 GHz, utilizing electron-beam lithography. Slot-antenna designs were found to be particularly suitable for coupling radiation into metal-oxide-metal (MOM) tunnel diodes at both frequencies. The MOM diodes are fabricated in a layered structure of Ni-NiO-Ni, and act as rectifying contacts. With contact areas as low as 120 nm × 120 nm, these diodes have time constants commensurate with rectification at frequencies across the desired millimeter-wave and infrared bands. One challenge in the development of true focal-plane array imagers across this factor-of-300 bandwidth is that the optimum spatial sampling interval on the focal plane is different in both bands. We have demonstrated a focal plane with interleaved infrared and millimeter-wave sensors by fabricating infrared antennas in the ground plane of the millimeter-wave antenna. Measured performance data in both bands are presented for individual antenna-coupled sensors as well as for devices in the dual-band focal-plane-array format.

The aim of this study is to analysis, investigate and find out the solutions for the problems associated with the implementations of antennas RFID Reader and Tag for various applications. In particular, the efficiency of the RFID reader antenna and the detection range of the RFID tag antenna, subject to a small and compact antenna¿s design configuration have been studied. The present work has been addressed directly to reduce the cost, size and increase the detection range and communication reliability of the RFID framework antennas. Furthermore, the modelling concept of RFID passive tags mounted on various materials including the novel design of RFID reader antenna using Genetic Algorithm (GA) are considered and discussed to maintain reliable and efficient antenna radiation performances. The main benefit of applying GA is to provide fast, accurate and reliable solutions of antenna¿s structure. Therefore, the GA has been successfully employed to design examples: meander-line, two linear cross elements and compact Helical- Spiral antennas. In addition, a hybrid method to model the human body interaction with RFID tag antenna operating at 900MHz has been studied. The near field distribution and the radiation pattern together with the statistical distribution of the radiation efficiency and the absorbed power in terms of cumulative distribution functions for different orientation and location of RFID¿s tag antenna on the human body have been demonstrated. Several tag antennas wi th symmetrical and unsymmetrical structure configurations operating in the European UHF band 850-950 MHz have been fabricated and tested. . The measured and simulated results have been found to be in a good agreement with reasonable impedance matching to the typical input impedance of an RFID integrated circuit chip and nominal power gain and radiation patterns.

Dealing with the electromagnetic issue might bring a sort of discontinuous and nondifferentiable regions. Thus, it is of great interest to implement an appropriate optimisation approach, which can preserve the computational resources and come up with a global optimum. While not being trapped in local optima, as well as the feasibility to overcome some other matters such as nonlinear and phenomena of discontinuous with a large number of variables. Problems such as lengthy computation time, constraints put forward for antenna requirements and demand for large computer memory, are very common in the analysis due to the increased interests in tackling high-scale, more complex and higher-dimensional problems. On the other side, demands for even more accurate results always expand constantly. In the context of this statement, it is very important to find out how the recently developed optimization roles can contribute to the solution of the aforementioned problems. Thereafter, the key goals of this work are to model, study and design low profile antennas for wireless and mobile communications applications using optimization process over a computational electromagnetics numerical solution. The numerical solution method could be performed over one or hybrid methods subjective to the design antenna requirements and its environment. Firstly, the thesis presents the design and modelling concept of small uni-planer Ultra- Wideband antenna. The fitness functions and the geometrical antenna elements required for such design are considered. Two antennas are designed, implemented and measured. The computed and measured outcomes are found in reasonable agreement. Secondly, the work is also addressed on how the resonance modes of microstrip patches could be performed using the method of Moments. Results have been shown on how the modes could be adjusted using MoM. Finally, the design implications of balanced structure for mobile handsets covering LTE standards 698-748 MHz and 2500-2690 MHz are explored through using firefly algorithm method. The optimised balanced antenna exhibits reasonable matching performance including near-omnidirectional radiations over the dual desirable operating bands with reduced EMF, which leads to a great immunity improvement towards the hand-held. / General Secretariat of Education and Scientific Research Libya