Multi-walled carbon nanotubes (MWCNTs) and integrated MWCNTs/ SiO2 nanoparticles (NPs) were loaded as additives into nanocomposite polyvinylidene fluoride (PVDF) membranes fabricated via phase inversion methods, and the effects of these additives on the structure and vacuum membrane distillation (VMD) performance of the membranes have been studied. With an appropriate amount of MWCNTs (2 wt.% to PVDF) blended into the membrane, VMD performance of membrane was improved significantly due to higher membrane porosity, contact angle and surface roughness without extreme compromise of liquid entry pressure of water (LEPw), which could reach up to 72 psi. Further integration of MWCNTs with a small amount of SiO2 nanoparticles (NPs) showed a synergic effect resulting in further improvement of VMD flux due primarily to the increase in surface pore size. When the amount of SiO2 NPs additive was large, the effects of NPs dominates the VMD performance. However, the asymmetric structure of PVDF membrane disappears, which exercises an unfavourable effect on VMD performance. All fabricated membranes exhibited a great desalination potential with extremely high salt rejection (>99.98%). The incorporation of MWCNTs did not improve the tensile properties of the membrane.

Due to the high specific surface area and aspect ratio (length to diameter ratio, or L/D) of carbon nanotubes, they tend to bind strongly through the van der Waals interactions prevailing among tubes. Thus, they agglomerate and settle in water to form large conglomerates. The adsorption of natural organic matter (NOM) or surfactants onto raw multi-walled carbon nanotubes (MWCNTs) was shown to effectively enhance the dispersibility and stabilization of MWCNTs. The two kinds of dispersants used were humic acid and peptone. Also, two functionalized MWCNTs (-OH and -COOH functional groups) were also dispersed in humic acid (HA) to evaluate the effect of surface property on CNT biological interactions. Based on the dynamic light scattering (DLS) analyses, the use of surfactants increased the steric hindrance as well as the charge repulsion between adjacent CNT particles, thereby enhancing their suspension. HA and peptone sorption onto the surface of MWCNTs can cover their hydrophobic surfaces and help stabilize CNTs. Furthermore, hydroxyl modification of MWCNTs resulted in stable dispersions in water containing HA at 10 and 1000mg/L, while COOH-MWCNT suspensions displayed stable dispersion with lower negative surface charges solely at 100g/L. While, TEM images agreed with the DSL analysis that HA-stabilized MWCNTs were well-dispersed compared to pep-stabilized MWCNTs. Both f-MWCNT types showed a significant reduction in agglomerates as compared to the non-functionalized one. It was noted that the dispersion state as well as the surface properties of both MWCNTs and f-MWCNTs plays an effective role in the potential toxic effects of CNTs. Decreases in the growth rate, chlorophyll index, water uptake, dry weight, and root elongation rate along with a rise in mortality were detected as an indication of phyto-toxicity in both the pep-MWCNT suspensions at 1000mg/L and the peptone control seedlings in contrast to the seedlings treated with pep-MWCNTs at 10 and 100mg/L doses . This was an indicator for the presence of suspended MWCNTs as well as their unstable dispersion in the water column. However, the interaction between the HA-CNTs and the plants improved development in terms of water uptake, growth rate, chlorophyll index, dry weight and root elongation rate due to their well- dispersed stability in water. There were no differences among the f-MWCNT, MWCNT and HA plant groups in terms of their quantum yield and chlorophyll content. While the f-MWCNTs significantly enhanced the plants' growth, water transpiration, and dry root and shoot weight as compared to the non-functionalized MWCNTs. It appeared that exposure to OH-MWCNTs improved the development of tomatoes in terms of water uptake, root elongation rate, and growth rate as well as light- and dark-adaptation, whereas COOH-MWCNTs and non-functionalized MWCNTs were apparently toxic in terms of root leakage and dark-adaptation. Overall, our results suggest that the surface properties of CNTs associated with their dispersion stability specify their influence on the growth of tomato plants. Moreover, the nature of the dispersant agent itself plays an active role in the toxicity of MWCNTs on tomatoes. Our investigation indicated that there is a significant correlation between the toxicity of unfunctionalized MWCNTs and f-MWCNTs and the toxicity of the dispersant agent.

There are in general two different types of studies concerning nanofluids. The first one concerns itself with the study of the effective thermal conductivity and the other with the study of convective heat transfer enhancement. The study on convective heat transfer enhancement generally incorporates the study on the thermal conductivity. Not many papers have been written on the convective heat transfer enhancement and even fewer concerning the study on multi-walled carbon nanotubes in the transitional flow regime. In this paper the thermal conductivity and viscosity was determined experimentally in order to study the convective heat transfer enhancement of the nanofluids. Multi-walled carbon nanotubes suspended in distilled water flowing through a straight, horizontal tube was investigated experimentally for a Reynolds number range of a 1 000 - 8 000, which included the transitional flow regime. The tube was made out of copper and has an internal diameter of 5.16 mm. Results on the thermal conductivity and viscosity indicated that they increase with nanoparticle concentration. Convective heat transfer experiments were conducted at a constant heat flux of 13 kW/m2 with 0.33%, 0.75% and 1.0% volume concentrations of multi-walled carbon nanotubes. The nanotubes had an outside diameter of 10 - 20 nm, an inside diameter of 3 - 5 nm and a length of 10 - 30 μm. Temperature and pressure drop measurements were taken from which the heat transfer coefficients and friction factors were determined as a function of Reynolds number. The thermal conductivities and viscosities of the nanofluids were also determined experimentally so that the Reynolds and Nusselt numbers could be determined accurately. It was found that heat transfer was enhanced when comparing the data on a Nusselt number as a function of Reynolds number graph but comparing the results on a heat transfer coefficient as a function of average velocity graph the opposite effect was observed. Performance evaluation of the nanofluids showed that the increase in viscosity was four times the increase in the thermal conductivity which resulted in an inefficient nanofluid. However, a study on the performance evaluation criterion showed that operating nanofluids in the transition and turbulent flow regime due to the energy budget being better than that of the distilled water. / Dissertation (MEng)--University of Pretoria, 2012. / Mechanical and Aeronautical Engineering / unrestricted

No / Nickel coated multi-walled carbon nanotubes (Ni-MWCNTs) having exceptional mechanical properties, thermal conductivity and dispersibility can effectively overlap in cementitious matrix, thus forming an enhanced and thermal conductive network. They are therefore a promising nanofiller for modifying cement and concrete materials. This paper studies the compressive properties of reactive powder concrete (RPC) filled with different aspect ratios of Ni-MWCNTs, including strength, toughness, Young's modulus and Poisson's ratio. It is concluded that the incorporation of 0.06 vol.% Ni-MWCNTs with an aspect ratio of 1500 maximally increases the compressive strength and toughness of RPC by 20.24%/20.39 MPa and 43.89%/56.35 (N·m), respectively. However, Young's modulus and Poisson's ratio of Ni-MWCNTs modified composites do not significantly be improved. Besides, a constitutive model of Ni-MWCNTs reinforced RPC under uniaxial compression is established based on the continuum damage mechanics theory, reasonably predicting the relationship between compressive strength and deformation of composites. The modification mechanism of Ni-MWCNTs is also investigated through the temperature distribution monitoring inside composites, Scanning Electron Microscope (SEM) observation and energy dispersive x-ray spectrometry (EDS) analysis of Ni-MWCNTs reinforced RPC. The thermal conductive network formed by Ni-MWCNTs in matrix reduces the temperature difference and improves the temperature uniformity inside composites, thereby decreasing thermal stresses, primary cracks and defects of composites. Furthermore, the incorporation of Ni-MWCNTs makes the RPC microstructures dense, decreases the average CaO to SiO2 ratio, and inhibits the development of cracks inside RPC, thus achieving effective enhancement to RPC. / National Science Foundation of China (52178188, 51978127 and 51908103), and the Fundamental Research Funds for the Central Universities (DUT21RC(3)039).

Yes / Highly oriented poly(lactic acid) (PLA)/multi-walled carbon nanotubes (MWNTs) composites were fabricated through solid hot drawing technology in an effort to improve the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. It was found that proper MWNTs content and drawing orientation can improve the tensile strength and modulus of PLA dramatically. With the increase in draw ratio, the cold crystallization peak became smaller, and the glass transition and the melting peak of PLA moved to high temperature, while the crystallinity increased, and the grain size decreased, indicating the stress-induced crystallization of PLA during drawing. MWNTs showed a nucleation effect on PLA, leading to the rise in the melting temperature, increase in crystallinity and reduction of spherulite size for the composites. Moreover, the intensity of (002) diffraction of MWNTs increased with draw ratio, indicating that MWNTs were preferentially aligned and oriented during drawing. Microstructure observation demonstrated that PLA matrix had an ordered fibrillar bundle structure, and MWNTs in the composite tended to align parallel to the drawing direction. In addition, the dispersion of MWNTs in PLA was also improved by orientation. Introduction of MWNTs and drawing orientation could significantly enhance the blood compatibility of PLA by prolonging kinetic clotting time, reducing hemolysis ratio and platelet activation.

Yes / Nickel coated multi-walled carbon nanotubes (NiMCNTs) are favorable reinforcing nanofillers for modifying cementitious composites due to their preeminent mechanical properties, electrical conductivity, thermal properties and dispersibility. This paper investigates the mechanical properties and compatibility of NiMCNTs filled cementitious composites, having two different types of cement, two water to cement ratios, and two dosages of five types of NiMCNTs. The results show that 0.06 vol.% NiMCNTs with small aspect ratios can significantly enhance the mechanical properties of cementitious composites, while NiMCNTs with large aspect ratios play a better strengthening effect at 0.03 vol.%. The flexural strength/toughness of cementitious composites containing 0.06 vol.% NiMCNTs with an aspect ratio of 200 can be increased by 19.65%/116.78%. Adding 0.03 vol.% NiMCNTs with an aspect ratio of 1000 enhances the compressive strength/toughness of composites by 18.61%/47.44%. Besides, NiMCNTs have preferable compatibility to cementitious composites prepared by P·O 42.5R cement with a water to cement ratio of 0.3. The enhancement mechanism is related to the denser microstructure and effective suppression of microcracks in the cementitious matrix by NiMCNTs with filling, bridging and pull-out effects, as well as the high interface bond strength between NiMCNTs and matrix. A strength prediction model for NiMCNTs reinforced cementitious composites is also established to estimate the mechanical strength of cementitious composites containing NiMCNTs with different aspect ratios/contents, showing a small relative error within ±6%/±13% for predicted flexural/compressive strength values in comparison with the experimental results. / Funding supported from the National Science Foundation of China (51908103 and 51978127), and the Fundamental Research Funds for the Central Universities (DUT21RC(3)039).

Ce travail de thèse est d’utilisation de nanotubes de carbon (NTCs) comme support pour confiner de nanoparticules métalliques ou comme gabarit pour le confinement de la phase active. Le chapitre I présente l’état actuel des connaissances sur les effets de confinement dans les NTCs. Le chapitre II décrit la préparation et la caractérisation de catalyseurs métalliques à base de ruthénium, de cobalt et de palladium, confinées à l’intérieur de NTCs. Dans ce cadre, l’étude de l’influence de différents paramètres tels que les conditions opératoires, la nature du métal ou du précurseur, ou un prétraitement du support NTC, sur la sélectivité du confinement est présentée. Le chapitre III comporte deux parties : l’une est consacrée à l’utilisation de NTCs comme gabarit pour la synthèse de nanotubes de silice (NTSs, en présence ou non de particules de ruthénium confinées dans leur canal). L’autre partie concerne l’immobilisation du catalyseur (complexe métallique de rhodium) dans une phase liquide ionique comme phase catalytique active avant le remplissage dans les NTCs. Le chapitre IV concerne l’application tous les systèmes catalytiques à base de catalyseurs confinés à l’intérieur de nanotubes dans les réactions d’hydrogénation du cinnamaldéhyde et du 1-hexène. L’effet de confinement sur les performances catalytiques est présenté. / This thesis is refer of carbon nanotubes (CNTs) as a support to confine metal nanoparticles or as a template for the confinement of the active phase. Chapter I give a comprehensive review of the state of knowledge on the effects of confinement in CNTs. Chapter II describes the preparation and characterization of the metals (ruthenium, palladium and cobalt) confined inside CNTs catalysts. In this context, the study of the influence of various parameters such as operating conditions, nature of the metal or precursor or nanosupport pretreatment, on the selectivity of confinement is presented. Chapter III consists of two parts: one is devoted to the using of CNTs as a template for the synthesis of silica nanotubes (SNTs in the presence or absence of ruthenium particles confined in their channel). The other part is the immobilization of the catalyst (rhodium metallic complex) in an ionic liquid phase as active catalytic phase before filling in CNTs. Chapter IV concernes the application all catalyst-filled CNTs systems in the hydrogenation of cinnamaldehyde and 1-hexene reaction. The confinement effect on the catalytic performance is presented.

Este trabalho traz a aplicação de alta pressão e alta pressão/temperatura (4.0 GPa e 400º C), em amostras de nanotubos de carbono de paredes múltiplas (NTCPM) comerciais para a obtenção de amostras compactas. Os NTCPM foram funcionalizados com ácido nítrico e ácido nítrico/ácido sulfúrico e, também foram usados nanotubos de carbono dopados com nitrogênio. Foram também processadas amostras contendo nanotubos de carbono de paredes múltiplas incorporados em matriz de zircônia obtida pelo método sol-gel. Para aplicação da alta pressão foi usado um sistema com câmaras do tipo toroidal, utilizando grafite como meio transmissor de pressão. Foram obtidas amostras macroscópicas autossuportadas e com resistência ao manuseio principalmente nas amostras de nanotubos de carbono funcionalizados com ácido nítrico/ácido sulfúrico incorporados em zircônia. Para a caracterização das amostras foram utilizadas as técnicas de Microscopia Eletrônica de Transmissão, Espectroscopia Raman, Difração de Raios X e isotermas de adsorção/dessorção de nitrogênio com as quais foi possível determinar que mesmo após a aplicação de alta pressão/temperatura os nanotubos de carbono não sofrem significativas modificações na sua estrutura e nas suas propriedades morfológicas e texturais, confirmando então que os NTCPM mantém suas características originais, apresentando condições para aplicações em dispositivos. As amostras macroscópicas contendo nanotubos de carbono de paredes múltiplas incorporados em zircônia apresentaram ainda resistência à carga de milhares de vezes o seu peso e comportamento de materiais semi-condutores. / This work presents the application of high pressure and/or high pressure/temperature (4.0 GPa and 400 ° C), on different samples of commercial multi-walled carbon nanotube (MWCNT) to obtain compacted samples. MWCNT were functionalized with nitric acid and nitric acid/sulfuric acid, and also carbon nanotubes doped with nitrogen. MWCNT incorporated in a zirconia matrix obtained by sol-gel method were also processed. For high pressure application it was used a system with the toroidal-type chamber, using graphite as a pressure transmitting medium. Self-supported macroscopic samples were obtained, easy to handle, especially in samples of functionalized carbon nanotubes with nitric and sulfuric acid and also incorporated in zirconia. To characterize the samples it was used Transmission Electron Microscopy, Raman Spectroscopy, X-ray diffraction and nitrogen adsoption/desorption isotherms and it was determined that even after application of high pressure/temperature carbon nanotubes do not suffer significant changes in their structure and in their morphological and textural properties, confirming that the CNT keeps its original characteristics and providing conditions for device applications. The macroscopic samples containing MWCNT incorporated in zirconia also exhibited resistance to load of thousands times its own weight and behavior like semiconductor materials.

<p>This study reports on the changes in the structural properties of a tungsten-filament when exposed to a methane / hydrogen ambient for different durations at various filament-temperatures.</p>

The use of Multi-Walled Carbon Nanotubes (MWCNT) as solid sorbent in Matrix Solid-Phase Dispersion (MSPD) extraction and preconcentration method was presented to determine some commonly used organophosphorus insecticides/OPIs in honey samples using a Gas Chromatography Flame Ionization Detector (GC-FID). OPIs are poisonous compounds used to kill insects and rodents by affecting their nervous system. The limit of detections obtained after MSPD extraction were 7.0 ng/g for Malathion, Malaoxon and Fenitrothion and 33.3 ng/g for Isomalathion. The recovery of the insecticides from spiked honey, ranged from 83.6% to 103.3% with % RSD ranged from 9.8% to 12.3% (n=3). The correlation coefficient (R2) of the calibration data varied from 0.9945 to 0.9987. Standard addition method was utilized to examine matrix-induced effects on analyte peaks, and to demonstrate the efficiency of the method. The MSPD extraction was successfully applied for the analysis of four honey samples but no insecticide residues were detected.