Este trabalho apresenta o desenvolvimento de uma plataforma para o estudo teórico e experimental de dispositivos amplificadores de micro-ondas do tipo válvula de ondas progressivas (TWT). A plataforma é composta por um modelo matemático e uma bancada de testes. O modelo matemático descreve a TWT como uma linha de transmissão acoplada a um feixe eletrônico unidimensional, onde as forças de carga espacial AC e DC são calculadas auto consistentemente, eliminando-se a necessidade de um cálculo separado para o fator de redução de carga espacial. O modelo matemático deu origem a dois códigos para a simulação da TWT. Ambos foram comparados com resultados experimentais e teóricos disponíveis na literatura especializada para uma pré-validação. O nível de concordância entre os presentes resultados e aqueles de referência foi acima de 90%, o que atendeu as expectativas de exatidão do modelo, tendo em vista que nem todos os parâmetros de entrada estavam disponíveis na referência. A bancada de testes construída é composta por uma TWT com banda de operação de 6,0 a 18 GHz e potência saturada máxima em torno de 55 dBm (316 W) em 13 GHz, um circuito de polarização para a mesma e a instrumentação necessária para a realização das medidas pertinentes aos amplificadores de potência. A TWT em questão foi caracterizada segundo seu comportamento mono-sinal e multi-sinal. As curvas de ganho e potência foram obtidas em função da frequência utilizando a voltagem de aceleração do feixe eletrônico e a potência de entrada como parâmetros. As curvas de transferência de potência, de fase e compressão de ganho foram obtidas para frequências escolhidas ao longo da banda, tendo novamente a voltagem de aceleração como parâmetro. Adicionalmente, a produção de produtos de intermodulação de terceira ordem foi caracterizada no ponto de 1 dB de compressão de ganho ao longo da banda analisada. Um teste de linearização por injeção de sinais, que estava previsto no plano de trabalho, não apresentou o desempenho esperado devido a problemas no funcionamento do circuito linearizador. Esses problemas foram analisados e listou-se uma série de passos para saná-los. / This work deals with the development of a platform for theoretical and experimental investigations of microwave amplifiers devices of the type traveling-wave tube (TWT). The platform consists of a mathematical model and a test bench. The mathematical model describes the TWT as a transmission line coupled to a onedimensional electron beam, in which the AC and DC space charge forces are calculated self-consistently, eliminating the need for a separate calculation for the space charge reduction factor. The mathematical model gave rise to two codes for the simulation of TWTs. Both codes were validated against experimental and theoretical results available in the literature. The overall level of agreement between the present results and those from the reference was above 90%, which was considered satisfactory since not all input parameters were available in the reference. The test bench consists of a wideband TWT operating from 6.0 to 18 GHz and maximum saturated power around 55 dBm (316 W) at 13 GHz, a biasing circuit, and the instrumentation needed to perform the relevant measurements to the power amplifier. The TWT in question was characterized according to its mono-signal and multi-signal behavior. The gain and power curves were obtained as a function of the frequency using the beam voltage and the input power as parameters. The curves of power transfer, phase transfer and gain compression were obtained for selected frequencies along the operating band, again, using the beam voltage as a parameter. Furthermore, the production of third-order intermodulation products was measured at the 1 dB gain compression point over the band analyzed. A linearization test applying the signal injection technique, which was part of the initial work plan, presented inadequate performance due to problems in the linearizer circuit operation. These problems were analyzed and a guide to solve them was provided.

Στην παρούσα διδακτορική διατριβή παρουσιάζεται µία µελέτη τυπωµένων κεραιών γεωµετρίας φράκταλ για ασύρµατες τερµατικές συσκευές, µε έµφαση στις εφαρµογές των κινητών επικοινωνιών και των ασύρµατων τοπικών δικτύων. Η ραγδαία εξέλιξη των ασύρµατων επικοινωνιών είχε ως αποτέλεσµα την σηµαντική µείωση των διαστάσεων των τερµατικών συσκευών, την ολοκλήρωση διαφορετικών υπηρεσιών διαφορετικών συχνοτήτων λειτουργίας στην ίδια συσκευή και την ανάγκη πολλαπλών κεραιών για την αντιµετώπιση του φαινοµένου της διάλειψης και της διασυµβολικής παρεµβολής του ασύρµατου καναλιού. Αυτές οι εξελίξεις έθεσαν καινούργιες απαιτήσεις στην σχεδίαση της κεραίας οδηγώντας στην ανάγκη κεραιών εξαιρετικά µικρών διαστάσεων, πολυσυχνοτικών, χαµηλού κόστους, υψηλής απόδοσης και επιθυµητών χαρακτηριστικών ακτινοβολίας κατά περίπτωση. Στα πλαίσια της διατριβής διερευνήθηκε η ικανότητα σµίκρυνσης και παραγωγής πολυσυχνοτικής συµπεριφοράς που παρουσιάζουν τα σχήµατα γεωµετρίας φράκταλ αν χρησιµοποιηθούν σαν κεραίες. Αρχικά προτείνεται µία καινούργια κατηγορία κεραιών, οι τυπωµένες µονοπολικές κεραίες γεωµετρίας φράκταλ και συγκρίνονται διάφορες γεωµετρίες φράκταλ τόσο ως προς την ικανότητα σµίκρυνσης όσο και ως προς τα χαρακτηριστικά εµπέδησης και ακτινοβολίας που παρουσιάζουν. Εξετάζεται ο καθοριστικός ρόλος του επιπέδου γείωσης αυτής της κατηγορίας κεραιών και εξάγονται γενικά συµπεράσµατα για την εκµετάλλευσή του µε τον βέλτιστο δυνατό τρόπο. Επιπλέον διερευνήθηκε η χρήση των σχηµάτων φράκταλ για την µείωση των διαστάσεων των µικροταινιακών κεραιών. Η φράκταλ ορθογώνια καµπύλη προτείνεται για εφαρµογές γραµµικής και κυκλικής πόλωσης, η οποία παρουσιάζει σηµαντική ικανότητα σµίκρυνσης και προσφέρει πολλούς σχεδιαστικούς βαθµούς ελευθερίας που µπορούν να χρησιµοποιηθούν είτε για περαιτέρω µείωση του µεγέθους της είτε για την διατήρηση του εύρους ζώνης της σε ικανοποιητικά επίπεδα. Λόγω του συµπαγούς σχήµατος και των επιθυµητών χαρακτηριστικών των τυπωµένων µονοπολικών και µικροταινιακών κεραιών φράκταλ, µελετάται περαιτέρω η χρησιµοποίησή τους για την υλοποίηση συστηµάτων πολλαπλών κεραιών µε σκοπό την βελτίωση της ποιότητας του λαµβανοµένου σήµατος. Ακόµη µελετάται η ικανότητα παραγωγής πολυσυχνοτικής συµπεριφοράς της µονοπολικής κεραίας Sierpinski και προτείνεται µία τροποποίηση η οποία µειώνει σηµαντικά το µέγεθος της κεραίας και καθίσταται δυνατόν να τυπωθεί σε ασύρµατες συσκευές µικρού µεγέθους. Επιπλέον, διερευνώνται διάφορες τεχνικές για να ελεγχθούν οι συχνότητες συντονισµού της κεραίας και να συµπέσουν µε τις εκάστοτε επιθυµητές µπάντες λειτουργίας. Τέλος εξετάζεται η επίδραση των διαστάσεων του επιπέδου γείωσης στα χαρακτηριστικά εµπέδησης του συστήµατος. / This Ph.D. thesis presents a comprehensive study on printed fractal antennas for wireless terminal devices, with emphasis on mobile and wireless local area network applications. The rapid evolution of wireless communications resulted in a decrease of terminal devices’ dimensions, in the integration of different services, operating in different spectra, in the same device and finally in the deployment of multiple antenna systems to mitigate the phenomena of fading and intersymbol interference of wireless channel. These evolutions, in turn, set new demands on antenna’s design leading to the necessity of exceptionally small, multiband and low cost radiators possessing high efficiency and desirable radiation characteristics. In the context of the present work, the miniaturization and multiband ability of fractal shaped antennas is examined. Initially a new antenna type is proposed, that of printed fractal monopole antennas, and several innovative fractal shaped monopoles are compared with respect to their miniaturization ability, input impedance and radiation characteristics. The important role of the ground plane is also investigated and general conclusions are drawn to exploit its effects in the most appropriate way. The application of fractals on microstrip antennas was further studied with the fractal rectangular curve (frc) microstrip antenna being proposed for linear and circular polarization applications. The frc microstrip antenna proved to possess a noticeable miniaturization ability and a geometry with several degrees of freedom that can be used either to reduce further its size, or to keep the bandwidth to a satisfactory level. Due to the compact size and desirable electrical characteristics of printed monopole and microstrip fractal antennas, they were further considered for the implementation of multi element antenna systems in order to improve the SNR of the received signal. Finally, the multiband ability of the Sierpinski monopole antenna is investigated and a modification is proposed to decrease the overall antenna height making it feasible to be printed in small terminal devices. Several techniques to allocate the desirable bands of interest are also discussed along with the effect the ground plane dimension’s on the system’s input impedance.

La mesure de Matières En Suspension (MES) est cruciale autant pour comprendre les transferts sédimentaires que pour les études des écosystèmes marins. Elles sont classiquement mesurées ponctuellement par des prélèvements d’eau in situ, ou à partir des propriétés optiques de l’eau. Mais depuis plusieurs décennies, les appareils acoustiques, ont montré leur capacité à mesurer ces MES sur de plus grands volumes. Ces mesures, en particulier celles de la concentration, s’appuient sur les propriétés de rétrodiffusion des particules. Mais ces mesures demeurent peu représentatives dans la mesure où le contenu en MES dans la colonne d’eau varie à différentes échelles de temps et d’espace. Dans un premier temps, ces travaux de thèse visent à montrer à travers des mesures in situ réalisées dans l’estuaire de l’Aulne qu’il est possible d’étendre spatialement la mesure par inversion des données issues de sondeurs multifaisceaux (SMF). Un modèle de rétrodiffusion adapté à la suspension d’intérêt, constituée dans cette étude d’agrégats estuariens, est d’abord élaboré. Puis grâce à des observations issues d’un profileur multifréquences, la concentration massique en MES, distribuée par classes de tailles, a pu être déterminée par la résolution d’un problème inverse. Ces informations permettent de déterminer les rayons équivalents de la suspension, grâce auxquels les données issues du SMF, au préalable calibrées par une méthode innovante, peuvent être inversées de manière directe. Une étude des incertitudes attachées aux valeurs de concentrations estimées est par la suite proposée afin de qualifier la pertinence des résultats. Puis dans un second temps, les conditions nécessaires à l’établissement d’un protocole de mesure des MES par système multi-capteur sont identifiées. Ce dernier permet la caractérisation en continu des MES à différentes échelles de temps et d’espace, en exploitant la complémentarité des mesures issues des différents instruments. / Measuring Suspended Particulate Matter (SPM) is essential to better understand sediment transport and marine ecosystems. SPM is traditionnaly estimated through in situ water samples analysis, or based on the optical properties of water. Yet for several decades, acoustical devices have shown their capability to measure SPM on larger volumes. These measurements (especially in terms of SPM concentration) are based on the backscattering properties of the particles. However, these measurements remain limited, since the SPM content in the water column is subjected to variations on both spatial and temporal scales.As a first step, this work aims at showing that it is possible to increase the degree of spatialization of the SPM measurements by inverting MultiBeam EchoSounder (MBES) data, through in situ measurements acquired in the Aulne macrotidal estuary. A backscattering model was first designed to describe the backscattering properties of the suspension of interest, consisting in this study in estuarine agregates. Then, thanks to multifrequency observations, the SPM mass concentration sorted by size classes was retrieved through the the resolution of the inverse problem. This kind of information allows to determine the equivalent spherical radius of the the whole suspension, through which the MBES data, calibrated beforehand using an original method, can be directly inverted. Subsequently, a study of the uncertainties attached to the final concentration estimate is proposed in order to qualify the relevance of the results.In a second step, the necessary conditions for establishing a measurement protocol of the SPM are identified. The latter allows continuous characterization of SPM at different spatial and temporal scales, by exploiting the complementarity of the measures delivered by different instruments.

Dans nombre d’applications thérapeutiques des ultrasons, il peut être intéressant d’augmenter l’activité de cavitation inertielle tout en limitant au maximum les intensités utilisées : ceci permet de maximiser les effets mécaniques des ultrasons au niveau des tissus visés tout en minimisant les échauffements des tissus environnants. L’étude expérimentale présentée ici ² porte sur la modification des seuils de cavitation inertielle et de l’activité de cavitation au-delà du seuil lorsqu’un signal bifréquentiel comportant deux composantes fréquentielles proches est utilisé. Le caractère non linéaire de la modification du seuil est démontré. Ainsi, des réductions significatives de l’intensité nécessaire à l’obtention de cavitation inertielle peuvent être obtenues dans des milieux où les seuils sont élevés. De plus, l’évolution de l’activité de cavitation lorsque l’intensité ultrasonore est augmentée au-delà du seuil montre qu’avec une excitation bifréquentielle, de fortes activités de cavitation peuvent être atteintes pour des intensités plus proches du seuil. Ce point présente un double intérêt sur le plan de l’application pratique, puisque cela signifie une meilleure séparation des régimes cavitant et non cavitant et permet de réduire encore, par rapport à une excitation monofréquentielle, les intensités requises pour atteindre une activité de cavitation donnée. Des essais sur modèle de caillots sanguins ont permis de valider in vitro l’efficacité de cette excitation bifréquentielle pour la thrombolyse purement ultrasonore. / Enhancing cavitation activity using lower acoustic intensities is interesting to a variety of therapeutic applications, where the mechanical effects of cavitation are required with minimal heating of surrounding tissues. The present experimental work is focused on the modification of the inertial cavitation threshold and on the cavitation activity beyond the threshold where an excitation signal made of two neighbouring frequency components is used. A significant reduction of the acoustic intensity required to trigger cavitation can be obtained in a medium with a strong cavitation threshold. Moreover, comparing the evolution of the cavitation activity beyond the threshold where mono- and bi-frequency excitations are used, it is shown, in the latter case, that strong activities can be reached with intensities closer to the threshold value. This fact would offer a dual-benefit in terms of therapeutic applications, as it enables a better separation between the cavitating and non-cavitating regime and allows lower intensities to be used to attain a given cavitation activity. The evolution of the bifrequency threshold as function of the external parameters shows that the mechanisms involved are nonlinear. Experiments on in vitro blood clot models have validated the efficiency of this bifrequency excitation for purely ultrasound thrombolysis

This thesis presents solutions and studies related to the design of wideband antennas for wireless handheld terminal applications. A method of electrically shortening the terminal chassis length to obtain resonance at high frequencies has been proposed and evaluated, thereby increasing the antennas impedance bandwidth. No significant effect on the lower frequency band in a dual-band antenna prototype has been observed, making the method suitable for multi-band applications. The chassis has further been utilized as a zero-thickness 0.9 - 2.7 GHz high efficiency antenna by inserting a notch in the chassis center, and a feasibility study for typical phones has been performed. Additionally, the effect of talk position on the chassis wave-mode has been investigated, where the standard equivalent circuit model for terminal antennas has been modified to include the presence of the users head. The model has been used to explain measured and simulated effects concerning frequency detuning, efficiency reduction and bandwidth enhancements when the terminal is placed in talk position. The use of a hands-free earpiece cord is currently mandatory for FM radio reception as the cord is utilized as antenna. However, there is currently a market driven demand for removing the cord requirement since many modern phones are equipped with speakers and Bluetooth headsets. In this thesis, an active ferrite loop antenna is proposed as an internal replacement/complement with a performance of -23 dB (G/T degradation) compared to a full-size lossless dipole in urban environments. Also, a modification to the cord is suggested for DVB H reception. Complex matching networks have been investigated to increase the bandwidth of dual band PIFA antennas, and a printed dual band dipole has been integrated with a modified Marchand balun for dual resonance at two separate frequency bands, thus covering the commercial cellular bands 824-960 and 1710-2170 MHz with a single antenna.

<p>This thesis presents solutions and studies related to the design of wideband antennas for wireless handheld terminal applications. A method of electrically shortening the terminal chassis length to obtain resonance at high frequencies has been proposed and evaluated, thereby increasing the antennas impedance bandwidth. No significant effect on the lower frequency band in a dual-band antenna prototype has been observed, making the method suitable for multi-band applications. The chassis has further been utilized as a zero-thickness 0.9 - 2.7 GHz high efficiency antenna by inserting a notch in the chassis center, and a feasibility study for typical phones has been performed. Additionally, the effect of talk position on the chassis wave-mode has been investigated, where the standard equivalent circuit model for terminal antennas has been modified to include the presence of the users head. The model has been used to explain measured and simulated effects concerning frequency detuning, efficiency reduction and bandwidth enhancements when the terminal is placed in talk position.</p><p>The use of a hands-free earpiece cord is currently mandatory for FM radio reception as the cord is utilized as antenna. However, there is currently a market driven demand for removing the cord requirement since many modern phones are equipped with speakers and Bluetooth headsets. In this thesis, an active ferrite loop antenna is proposed as an internal replacement/complement with a performance of -23 dB (G/T degradation) compared to a full-size lossless dipole in urban environments. Also, a modification to the cord is suggested for DVB H reception.</p><p>Complex matching networks have been investigated to increase the bandwidth of dual band PIFA antennas, and a printed dual band dipole has been integrated with a modified Marchand balun for dual resonance at two separate frequency bands, thus covering the commercial cellular bands 824-960 and 1710-2170 MHz with a single antenna.</p>

Nearfield Acoustical Holography (NAH) is an acoustic field visualization technique that can be used to reconstruct three-dimensional (3-D) acoustic fields by projecting two-dimensional (2-D) data measured on a hologram surface. However, linear NAH algorithms developed and improved by many researchers can result in significant reconstruction errors when they are applied to reconstruct 3-D acoustic fields that are radiated from a high-level noise source and include significant nonlinear components. Here, planar, nonlinear acoustical holography procedures are developed that can be used to reconstruct 3-D, nonlinear acoustic fields radiated from a high-level noise source based on 2-D acoustic pressure data measured on a hologram surface. The first nonlinear acoustic holography procedure is derived for reconstructing steady-state acoustic pressure fields by applying perturbation and renormalization methods to nonlinear, dissipative, pressure-based Westervelt Wave Equation (WWE). The nonlinear acoustic pressure fields radiated from a high-level pulsating sphere and an infinite-size, vibrating panel are used to validate this procedure. Although the WWE-based algorithm is successfully validated by those two numerical simulations, it still has several limitations: (1) Only the fundamental frequency and its second harmonic nonlinear components can be reconstructed; (2) the application of this algorithm is limited to mono-frequency source cases; (3) the effects of bent wave rays caused by transverse particle velocities are not included; (4) only acoustic pressure fields can be reconstructed. In order to address the limitations of the steady-state, WWE-based procedure, a transient, planar, nonlinear acoustic holography algorithm is developed that can be used to reconstruct 3-D nonlinear acoustic pressure and particle velocity fields. This procedure is based on Kuznetsov Wave Equation (KWE) that is directly solved by using temporal and spatial Fourier Transforms. When compared to the WWE-based procedure, the KWE-based procedure can be applied to multi-frequency source cases where each frequency component can contain both linear and nonlinear components. The effects of nonlinear bent wave rays can be also considered by using this algorithm. The KWE-based procedure is validated by conducting an experiment with a compression driver and four numerical simulations. The numerical and experimental results show that holographically-projected acoustic fields match well with directly-calculated and directly-measured fields.

Electrical Impedance Tomography (EIT) is a non linear inverse problem in which the electrical conductivity or resistivity distribution across a closed domain of interest is reconstructed from the surface potentials measured at the domain boundary by injecting a constant sinusoidal current through an array of surface electrodes. Being a non-invasive, non-radiating, non-ionizing, portable and inexpensive methodology, EIT has been extensively studied in medical diagnosis, biomedical engineering, biotechnology, chemical engineering, industrial and process engineering, civil and material engineering, soil and rock science, electronic industry, defense field, nano-technology and many other fields of applied physics. The reconstructed image quality in EIT depends mainly on the boundary data quality and the performance of the reconstruction algorithm used. The boundary data accuracy depends on the design of the practical phantoms, current injection method and boundary data measurement process and precision. On the other hand, the reconstruction algorithm performance is highly influenced by the mathematical modeling of the system, performance of the forward solver and Jacobian computation, inverse solver and the regularization techniques. Hence, for improving the EIT system performance, it is essential to improve the design of practical phantom, instrumentation and image reconstruction algorithm. As the electrical impedance of biological materials is a function of tissue composition and the frequency of applied ac signal, the better assessment of impedance distribution of biological tissues needs multifrequency EIT imaging. In medical EIT, to obtain a better image quality for a complex organ or a body part, accurate domain modelling with a large 3D finite element mesh is preferred and hence, the computation speed becomes very expensive and time consuming. But, the high speed reconstruction with improved image quality at low cost is always preferred in medical EIT. In this direction, a complete multifrequency multifunction EIT (MfMf-EIT) system is developed and multifrequency impedance reconstruction is studied to improve the bioimpedance imaging. The MfMf-EIT system consists of an MfMf-EIT instrumentation (MfMf-EITI), high speed impedance image reconstruction algorithms (IIRA), a Personal Computer (PC) and a number of practical phantoms with EIT sensors or electrodes. MfMf-EIT system and high speed IIRA are studied tested and evaluated with the practical phantoms and the multifrequency impedance imaging is improved with better image quality as well as fast image reconstruction. The MfMf-EIT system is also applied to the human subjects and the impedance imaging is studied for human body imaging and the system is evaluated. MfMf-EIT instrumentation (MfMf-EITI) consists of a multifrequency multifunction constant current injector (MfMf-CCI), multifrequency multifunction data acquisition system (MfMf DAS), a programmable electrode switching module (P-ESM) and a modified signal conditioner blocks (M-SCB) or data processing unit (DPU). MfMf-CCI, MfMf-DAS, P-ESM and M-SCBs are interfaced with a LabVIEW based data acquisition program (LV-DAP) controlled by a LabVIEW based graphical user interface (LV-GUI). LV-GUI controls the current injection and data acquisition with a user friendly, fast, reliable, efficient measurement process. The data acquisition system performance is improved by the high resolution NIDAQ card providing high precision measurement and high signal to noise ratio (SNR). MfMf-EIT system is developed as a versatile data acquisition system with a lot of flexibilities in EIT parameter selection that allows studying the image reconstruction more effectively. MfMf-EIT instrumentation controls the multifrequency and multifunctioned EIT experimentation with a number of system variables such as signal frequency, current amplitude, current signal wave forms and current injection patterns. It also works with either grounded load CCI or floating load CCI and collects the boundary data either in grounded potential form or differential form. The MfMf-EITI is futher modified to a battery based MfMf-EIT (BbMfMf-EIT) system to obtain a better patient safety and also to improve the SNR of the boundary data. MfMf-EIT system is having a facility of injecting voltage signal to the objects under test for conducting the applied potential tomography (APT). All the electronic circuit blocks in MfMf-EIT instrumentation are tested, evaluated and calibrated. The frequency response, load response, Fast Fourier Transform (FFT) studies and DSO analysis are conducted for studying the electronic performance and the signal quality of all the circuit blocks. They are all evaluated with both the transformer based power supply (TBPS) and battery based power supply (BBPS). MfMf-DAS, P-ESM and LV-DAP are tested and evaluated with digital data testing module (DDTM) and practical phantoms. A MatLAB-based Virtual Phantom for 2D EIT (MatVP2DEIT) is developed to generate accurate 2D boundary data for assessing the 2D EIT inverse solvers and its image reconstruction accuracy. It is a MATLAB-based computer program which defines a phantom domain and its inhomogeneities to generate the boundary potential data by changing its geometric parameters. In MatVP2DEIT, the phantom diameter, domain discretization, inhomogeneity number, inhomogeneity geometry (shape, size and position), electrode geometry, applied current magnitude, current injection pattern, background medium conductivity, inhomogeneity conductivity all are set as the phantom variables and are chosen indipendently for simulating different phantom configurations. A constant current injection is simulated at the phantom boundary with different current injection protocols and boundary potential data are calculated. A number of boundary data sets are generated with different phantom configurations and the resistivity images are reconstructed using EIDORS (Electrical Impedance Tomography and Diffuse Optical Tomography Reconstruction Software). Resistivity images are evaluated with the resistivity parameters and contrast parameters estimated from the elemental resistivity profiles of the reconstructed impedance images. MfMf-EIT system is studied, tested, evaluated with a number of practical phantoms eveloped with non-biological and biological materials and the multifrequency impedance imaging is improved. A number of saline phantoms with single and multiple inhomogeneities are developed and the boundary data profiles are studied and the phantom geometry is modified. NaCl-insulator phantoms and the NaCl-vegetable phantoms with different inhomogeneity configurations are developed and the multifrequency EIT reconstruction is studied with different current patterns, different current amplitudes and different frequencies using EIDORS as well as the developed IIRAs developed in MATLAB to evaluate the phantoms and MfMf-EIT system. Real tissue phantoms are developed with different chicken tissue backgrounds and high resistive inhomogeneities and the resistivity image reconstruction is studied using MfMf-EIT system. Chicken tissue phantoms are developed with chicken muscle tissue (CMTP) paste or chicken tissue blocks (CMTB) as the background mediums and chicken fat tissue, chicken bone, air hole and nylon cylinders are used as the inhomogeneity to obtained different phantom configurations. Resistivity imaging of all the real tissue phantoms is reconstructed in EIDORS and developed IIRAs with different current patterns, different frequencies and the images are evaluated by the image parameters to assess the phantoms as well as the MfMf-EIT system. Gold electrode phantoms are developed with thin film based flexible gold electrode arrays for improved bioimpedance and biomedical imaging. The thin film based gold electrode arrays of high geometric precision are developed on flexible FR4 sheet using electro-deposition process and used as the EIT sensors. The NaCl phantoms and real tissue phantoms are developed with gold electrode arrays and studied with MfMf-EIT system and and the resiulsts are compared with identical stainless steel electrode phantoms. NaCl phantoms are developed with 0.9% NaCl solution with single and multiple insulator or vegetable tissues as inhomogeneity. Gold electrode real tissue phantoms are also developed with chicken muscle tissues and fat tissues or other high resistive objects. The EIT images are reconstructed for the gold electrode NaCl phantoms and the gold electrode real tissue phantoms with different phantom geometries, different inhomogeneity configurations and different current patterns and the results are compared with identical SS electrode phantoms. High speed IIRAs called High Speed Model Based Iterative Image Reconstruction (HSMoBIIR) algorithms are developed in MATLAB for impedance image reconstruction in Electrical Impedance Tomography (EIT) by implementing high speed Jacobian calculation techniques using “Broyden’s Method (BM)” and “Adjoint Broyden’s Method (ABM)”. Gauss Newton method based EIT inverse solvers repeatitively evaluate the Jacobian (J) which consumes a lot of computation time for reconstruction, whereas, the HSMoBIIR with Broyden’s Methods (BM)-based accelerated Jacobian Matrix Calculators (JMCs) provides the high speed schemes for Jacobian (J) computation which is integrated with conjugate gradient scheme (CGS) for fast impedance reconstruction. The Broyden’s method based HSMoBIIR (BM-HSMoBIIR) and Adjoint Broyden’s method based HSMoBIIR (ABM-HSMoBIIR) algorithm are developed for high speed improved impedance imaging using BM based JMC (BM-JMC) and ABM-based JMC (ABM-JMC) respectively. Broyden’s Method based HSMoBIIR algorithms make explicit use of secant and adjoint information that can be obtained from the forward solution of the EIT governing equation and hence both the BM-HSMoBIIR and ABM-HSMoBIIR algorithms reduce the computational time remarkably by approximating the system Jacobian (J) successively through low-rank updates. The impedance image reconstruction is studied with BM-HSMoBIIR and ABM-HSMoBIIR algorithms using the simulated and practical phantom data and results are compared with a Gauss-Newton method based MoBIIR (GNMoBIIR) algorithm. The GNMoBIIR algorithm is developed with a Finite Element Method (FEM) based flexible forward solver (FFS) and Gauss-Newton method based inverse solver (GNIS) working with a modified Newton-Raphson iterative technique (NRIT). FFS solves the forward problem (FP) to obtain the computer estimated boundary potential data (Vc) data and NRIT based GNIS solve the inverse problem (IP) and the conductivity update vector [Δσ] is calculated by conjugate gradient search by comparing Vc measured boundary potential data (Vm) and using the Jacobian (J) matrix computed by the adjoint method. The conductivity reconstruction is studied with GNMoBIIR, BM-HSMoBIIR and ABM-HSMoBIIR algorithms using simulated data a practical phantom data and the results are compared. The reconstruction time, projection error norm (EV) and the solution error norm (Eσ) produced in HSMoBIIR algorithms are calculated and compared with GNMoBIIR algorithm. Results show that both the BM-HSMoBIIR and ABM-HSMoBIIR algorithms successfully reconstructs the conductivity distribution of the domain under test with its proper inhomogeneity and background conductivities for simulation as well as experimental studies. Simulated and practical phantom studies demonstrate that both the BM-HSMoBIIR and ABM-HSMoBIIR algorithms accelerate the impedance reconstruction by more than five times. It is also observed that EV and Eσ are reduced in both the HSMoBIIR algorithms and hence the image quality is improved. Noise analysis and convergence studies show that both the BM-HSMoBIIR and ABM-HSMoBIIR algorithms works faster and better in noisy conditions compared to GNMoBIIR. In low noise conditions, BM-HSMoBIIR is faster than to ABM-HSMoBIIR algorithm. But, in higher noisy environment, the ABM-HSMoBIIR is found faster and better than BM-HSMoBIIR. Two novel regularization methods called Projection Error Propagation-based Regularization (PEPR) and Block Matrix based Multiple Regularization (BMMR) are proposed to improve the image quality in Electrical Impedance Tomography (EIT). PEPR method defines the regularization parameter as a function of the projection error contributed by the mismatch (difference) between the data obtained from the experimental measurements (Vm) and calculated data (Vc). The regularization parameter in the reconstruction algorithm gets modified automatically according to the noise level in measured data and ill-posedness of the Hessian matrix. The L-2 norm of the projection error is calculated using the voltage difference and it is used to find the regularization parameter in each iteration in the reconstruction algorithm. In BMMR method, the response matrix (JTJ) obtained from the Jacobian matrix (J) has been partitioned into several sub-block matrices and the highest eigenvalue of each sub-block matrices has been chosen as regularization parameter for the nodes contained by that sub-block. The BMMR method preserved the local physiological information through the multiple regularization process which is then integrated to the ill-posed inverse problem to make the regularization more effective and optimum for all over the domain. Impedance imaging with simulated data and the practical phantom data is studied with PEPR and BMMR techniques in GNMoBIIR and EIDORS and the reconstructed images are compared with the single step regularization (STR) and Modified Levenberg Regularization (LMR). The projection error and the solution error norms are estimated in the reconstructions processes with PEPR and the BMMR methods and the results are compared with the errors estimated in STR and modified LMR techniques. Reconstructed images obtained with PEPR and BMMR are also studied with image parameters and contrast parameters and the reconstruction performance with PEPR and BMMR are evaluated by comparing the results with STR and modified LMR. PEPR and BMMR techniques are successfully implemented in the GNMoBIIR and EIDORS algorithms to improve the impedance image reconstruction by regularizing the solution domain in EIT reconstruction process. As the multifrequency EIT is always preferred in biological object imaging for better assessments of the frequency dependent bioimpedance response, multifrequency impedance imaging is studied with MfMf-EIT system developed for biomedical applications. MfMf-EIT system is studied, tested and evaluated with practical phantoms suitably developed for multifrequency impedance imaging within a wide range of frequency. Different biological materials are studied with electrical impedance spectroscopy (EIS) and a number of practical biological phantoms suitable for multifrequency EIT imaging are developed. The MfMf-EIT system is studied, tested and evaluated at different frequency levels with different current patterns using a number of NaCl phantoms with single, multiple and hybrid vegetable tissue phantoms as well as with chicken tissue phantoms. BbMfMf-EIT system is also studied and evaluated with the multifrequency EIT imaging using the developed biological phantoms. The developed MfMf-EIT system is applied on human body for impedance imaging of human anatomy. Impedance imaging of human leg and thigh is studied to visualize the muscle and bone tissues using different current patterns and different relative electrode positions. Ag/AgCl electrodes are attached to the leg and thigh using ECG gel and the boundary data are collected with MfMf-EIT EIT system by injecting a 1 mA and 50 kHz sinusoidal constant current with neighbouring and opposite current injection patterns. Impedance images of the femur bone of the human thigh and the tibia and fibula bones of the human leg along with the muscle tissue backgrounds are reconstructed in EIDORS and GNMoBIIR algorithms. Reconstructed resistivity profiles of bone and muscles are compared with the resistivity data profiles reported in the published literature. Impedance imaging of leg and thigh is studied with MfMf-EIT system for different current patterns, relative electrode positions and the images are evaluated to assess the system reliability. Battery based MfMf-EIT system (BbMfMf-EIT) is also studied for human leg and thigh imaging and it is observed that MfMf-EIT system and BbMfMf-EIT system are suitable for impedance imaging of human body imaging though the BbMfMf-EIT system increases the patiet safety. Therefore, the developed MfMf-EIT and BbMfMf-EIT systems are found quite suitable to improve the bio-impedance imaging in medical, biomedical and clinical applications as well as to study the anatomical and physiological status of the human body to diagnose, detect and monitor the tumors, lesions and a number of diseases or anatomical abnormalities in human subjects.

No description available.

The aim of this study was a prospective detection of postoperative lymphedema of the lower limbs in patients after the surgery for cervical and vulvar cancer using different methods of examination and their comparison and monitoring of postoperative complications and quality of life. Totally 78 women were followed after the surgery for cervical cancer and 36 for carcinoma of the vulva. Due to the radicality of the surgery the patients were divided into the conservative and radical groups. Lower limbs lymphedema were evaluated preoperatively and 3, 6 and 12 months after the surgery by the measurement of the lower limbs circumference, multifrequency bioelectrical impedance analysis (MFBIA) and subjective feeling. Quality of life using the European Organisation for Research and Treatment of Cancer (EORTC) questionnaires was evaluated before and 6 and 12 month after the surgery. 12 months after the cervical cancer surgery 35.9 % of patients reported subjective lymphedema, 37.18 % lymphedema were objectively diagnosed by the measurement of lower limb circuits and in 52.56 % of cases the increase of amount of extracellular fluid was detected by the MFBIA Ri/R0 method. The prevalence of lymphedema after the surgery for vulvar cancer reached 19.44% by the subjective assessment, 38.89 % by the measurement of...