O propósito deste trabalho foi o desenvolvimento de um procedimento simulador de processo reproduzindo a etapa de destilação extrativa de uma unidade de extração de butadieno a partir de uma corrente de hidrocarbonetos na faixa de quatro átomos de carbono, através da adição do solvente n-metil-2- pirrolidona (NMP). Os resultados obtidos foram comparados e validados com dados de processo obtidos por uma unidade industrial de extração de butadieno. O aprofundamento nos conceitos do processo de separação através de uma ferramenta em simulador de processo capaz de predizer condições de operação permitiu avaliações de aumento de capacidade. A capacidade dos elementos internos dos equipamentos envolvidos na separação pode ser avaliada e a identificação do ponto inicial de engargalamento da unidade foi possível. O procedimento proposto também permite reduzir incertezas para identificação de novos pontos de engargalamento a partir de uma nova configuração dos elementos internos identificados como ineficientes com a elevação de carga processada. / The purpose of this study was the development of a model using a commercial process simulator software in order to reproduce the extractive distillation step of a butadiene extraction unit from a hydrocarbon stream by the addition of the solvent n- methyl-2-pyrrolidone (NMP). The results obtained from the simulations were compared with process data from an operational butadiene extraction unit. The knowledge of the separation process due the model should predict operating conditions allowing revamps on the actual asset. The internals capacity for the equipment involved in the separation could be evaluated and units bottlenecks points should be identified.

本研究運用線性迴歸模型來預測微型金融對於貧窮、高中就讀率等等社會問題所帶來的效果，其中微型金融包括了微型信貸、微型儲蓄、微型保險以及微型金融機構所提供的匯款服務。本研究的樣本涵蓋了從2011年到2014年拉丁美洲及加勒比地區的20個國家。 在把樣本細分成可以比較的不同組別，並進行迴歸分析之後，我們發現微型金融對於貧窮人數有負向的顯著影響，對於高中就讀率有正向的顯著影響，而對於其他如醫療、創業、家庭支出與人均收入的影響並不顯著。 因應在拉丁美洲和加勒比地區不斷增加的微型金融機構，本研究建議未來可以利用更複雜的統計模型像是工具變量、隨機對照實驗、準實驗問卷來估計微型金融與影響之間是否有因果關係，對於NMP來說，他們應該鼓勵微型金融的發展以及接受適度的批判來確保透明且可靠的研究來作為政策制定的參考。 / The following research uses a panel linear model regression to detect possible effects Microfinance and its iterations (namely microcredit, microsavings, microinsurance, and remittance services offered by microfinancial institutions) have on distinct social outcomes such as poverty and secondary school enrollment rates. The study sample consists of 20 countries in the Latin American and Caribbean region observed during a period of 4 years (2011-2014). After subdividing the sample into comparable groups the results yielded statistically significant negative effects on poverty headcount, and statistically significant positive effects on secondary school enrollment rates across the subgroups. The results from other social welfare dimensions such as health, business creation, household consumption, and income per capita were insignificant. Due to the increasing presence of Microfinancial institutions in Latin America and the Caribbean, there is sufficient reason to encourage further research to be done in which more experienced researchers can use more statistically complex models (such as IV, RCTs, quasi-experimental surveys) to try to determine whether or not there is a causal relationship between microfinance and the effects herein described. For policymakers and funders of NMPs, the takeaway is that they should encourage both advocates and critics to present transparent and replicable studies to back their claims.

Les travaux présentés dans cette thèse portent sur le contrôle de la polymérisation radicalaire de l'éthylène à basse pression (200 bar) et basse température (70 °C) et sur la synthèse de copolymères à blocs contenant au moins un segment de polyéthylène. Quatre techniques de polymérisation, couramment utilisées en ingénierie macromoléculaire, ont été étudiées : NMP, CMRP, RAFT/MADIX et ESCP. Nos études sur le nitroxyde SG1 (NMP) et le bis(acétylacétonate) de cobalt (CMRP) ont montré que ces composés sont inefficaces pour contrôler la polymérisation de l'éthylène. Un comportement inattendu du bis(acétylacétonate) de cobalt a cependant été mis en évidence. Il semblerait que ces complexes de cobalt favorisent les réactions de couplage entre les radicaux propagateurs. En revanche, la première polymérisation radicalaire contrôlée de l'éthylène a été atteinte grâce à l'utilisation de xanthates (RAFT/MADIX). Les polyéthylènes synthétisés possèdent des masses molaires qui augmentent linéairement avec la conversion et des dispersités faibles. Le caractère pseudo-vivant de la réaction a été démontré par la synthèse de copolymères à blocs poly(acétate de vinyle)-b-polyéthylène. L'utilisation de nitrones (ESCP) a également permis l'introduction d'une fonction réactive au centre des chaînes de polyéthylène et la synthèse de copolymères triblocs de type ABA, où les blocs latéraux A sont en polystyrène ou polyacrylate et le bloc central B est en Polyéthylène / The work presented in this thesis displays the controlled radical polymerization of ethylene at low temperature (70 °C) and low pressure (200 bar) and the synthesis of block copolymers featuring polyethylene segments. Four polymerization techniques, commonly used in macromolecular engineering, were studied: NMP, CMRP, RAFT/MADIX and ESCP. Our investigation of the use of SG1 nitroxide (NMP) and cobalt (II) acetylacetonate (CMRP) as controlling agents demonstrated their inability to control the polymerization of ethylene. Nonetheless, an unexpected reaction with cobalt (II) acetylacetonate was observed. The coupling reaction between propagating radicals appeared to be favored by the presence of this compound. On the other hand, the first controlled polymerization of ethylene was successfully achieved by using xanthate (RAFT/MADIX). A linear increase of molecular weight with conversion and low polydispersities were observed for the produced polyethylenes. The reaction was demonstrated to be a pseudo-living polymerization by the synthesis of block copolymers poly(vinyl acetate)-b-polyethylene. In addition, midchain-functionalized polyethylenes and ABA type block copolymers, with polystyrene or polyacrylate as the A block and polyethylene as the B block, were also prepared using nitrone based polymerization technique (ESCP)

This thesis describes the investigation of thiadiazolidine 1-oxides and structurally related compounds as ligands in palladium catalysis. The introduction will provide background information on subjects related to the work of the main project. Palladium catalysed cross couplings, namely the Heck and Tsuji-Trost reactions, will feature prominently and will be discussed in basic detail. A general outline of different classes of ligands used in palladium catalysis will also be put forward. Extraneous factors which affect catalyst reactivity will also be discussed, including the use of microwave irradiation and the effect of additives. Special attention is paid towards sulfur containing ligands. As their use has been relatively limited this will also include other areas of catalysis. Investigations into the synthesis of esermethole prompt a general background of methods of synthesising oxindoles and also examples of previous syntheses of the compound. The second chapter begins by describing the initial exploratory work, the testing of a thiadiazolidine 1-oxide compound as a ligand for the Heck reaction. Aryl iodides are successfully coupled to a range of styrenes and α,β-unsaturated esters in excellent yields under microwave conditions. Aryl bromides are also successfully coupled after some optimisation. In many cases the presence of tetrabutylammonium bromide is required to prevent shattering of the sealed microwave vial. A range of differently substituted thiadiazolidine 1-oxides were synthesised in order to establish a pattern of reactivity based on steric and electronic factors. Structurally related chiral compounds were also synthesised, including the first reported enantiomerically pure thiadiazol-3-one 1-oxide and thiatriaza-indene 3-oxide systems chiral at the sulfur atom. The synthesis of oxindoles using palladium mediated and non-catalytic chemistry was also investigated. Investigations into the synthesis of esermethole were undertaken; the key stereoinducing reaction, the decarboxylative asymmetric allyic alkylation reaction, achieved a 46% ee. A formal synthesis of esermethole was outlined in 8 steps from commercially available material. The third chapter is the experimental section and is dedicated to the methods of synthesis and characterization of the compounds mentioned in the previous chapter. X-ray reports regarding the crystallographic representation of the structures presented in chapter two are provided in appendix A.

Bifenilas policloradas (PCBs) são compostos de difícil degradação presentes na composição de ascarel, muito utilizado como fluidos dielétricos e isolantes. Neste contexto, a presente pesquisa teve como objetivo avaliar a diversidade de microrganismos em biofilmes de reatores anaeróbios na presença de PCB empregando Métodos de Microbiologia de Anaeróbios Estritos e de Biologia Molecular. Em reator anaeróbio horizontal de leito fixo (RAHLF), alimentado com etanol, formiato, Triton X-100 (0,1%) e ascarel (1 mL/L), operado com tempo de detenção hidráulica (TDH) de 24 horas, foi retirado a comunidade microbiana do biofilme da espuma de poliuretano. Os grupos microbianos encontrados por meio da clonagem e sequenciamento do gene RNAr 16S para o domínio Bacteria foram relacionados aos filos Thermogae, Proteobacteria (Brachymonas petroleovorans, 100% de similaridade e Methylobacillus, 98% de similaridade), Firmicutes (Clostridium, 97% de similaridade, Syntrophomonas, 100% de similaridade e Sporomusa com 100% de similaridade), Synegistetes (Synergistes, 98% de similaridade), Spirochaetes (Leptonema illini, 98% de similaridade), Aminanaerobia, Deferribacteres, Chlorobi, Chloroflexi e Armatimonadetes. Além disso, como nesse biofilme foram identificadas bactérias redutoras de ferro, procedeu-se a sua quantificação por meio da técnica de tubos múltiplos (NMP, Número Mais Provável) obtendo 5,26 x \'10 POT.12\' NMP/g STV de bactérias redutoras de ferro. Ensaio em batelada foi realizado separadamente sob duas condições: (1) metanogênica e (2) ferro redutora. Em ambas as condições foram adicionadas aroclor 1260 (PCB). Os reatores, sob condição metanogênica, foram alimentados com meio de cultivo Angelidaki e substratos orgânicos (formiato e etanol), além de aroclor 1260 (0,2 \'mü\'g/L). Para simular a condição redutora de ferro foi acrescido ao meio de cultura Angelidaki, EDTA férrico (1,86 g/L). A produção de metano, na presença de aroclor 1260 foi de 3,8 x \'10 POT.-4\' mmol \'CH IND.4\'/g STV. A presença de bactérias ferro redutoras foi confirmada indiretamente pela taxa média de redução férrica (90%) nos reatores em batelada, após 60 dias de operação. Por meio de PCR/DGGE, elaborou-se um dendograma das amostras deste ensaio em batelada (metanogênico e redutor de ferro) comparativamente com as do reator RAHLF (biofilme presente na parede do reator e no material suporte). Os reatores em batelada apresentaram similaridade entre si de 79% e 92% para os domínios Bacteria e Archaea, respectivamente. As amostras do reator RAHLF foram 80% (Bacteria) e 96% (Archaea) similares. A existência de bactérias degradadoras de PCB, bem como, bactérias redutoras de ferro no biofilme anaeróbio contribuiu com informações sobre o consórcio microbiano e sua diversidade. / Polychlorinated biphenyls (PCBs) are compounds of difficult degradation, a component of askarel, which were used widely as coolants and lubricants. Hence, this study evaluated the diversity of microorganisms in the presence of PCBs in anaerobic reactors. For such, methods as Strict Anaerobic Microbiology and Molecular Biology were employed. The microbial community of the biofilm, developed in a fixed horizontal bed anaerobic reactor (RAHLF), was studied using the technique of cloning and sequencing of RNAr 16S gene for the Bacteria domain. The reactor had immobilized cells in polyurethane foam with ethanol and formate as a carbon source, Triton X-100 (0.1%) and polychlorinated biphenyls (1 mL/L), and operated with 24 hours HRT. The microbial groups found in this biofilm were related to phyla Thermogae, Proteobacteria (Brachymonas petroleovorans, 100% similarity and Methylobacillus, 98% similarity), Firmicutes (Clostridium, 97% similarity Syntrophomonas, and 100% similarity with Sporomusa 100% similarity), Synegistetes (Synergistes, 98% similarity), Spirochaetes (Leptonema Illini, 98% similarity), Aminanaerobia, Deferribacteres, Chlorobi, Chloroflexi and Armatimonadetes. Furthermore, as bacteria that reduce iron were found, we proceeded the quantification by the multiple tube method (MPN) for this group, obtaining 5.26 x \'10 POT.12\' MPN/g STV of iron-reducing bacteria. The batch reactors evaluated the growth of microorganisms in two condictions: (1) methanogenic e (2) iron reduction, both had the presence of PCBs (Aroclor 1260). The reactor, under methanogenic condition, was fed with synthetic substrate Angelidaki, ethanol and formate, used as carbon source, and aroclor 1260 (0.2 \'mü\'g /L). To simulate the condition of iron reducing, the same synthetic substrate was supplemented with ferric EDTA (1.86 g/L). The production of methane in the presence of aroclor 1260, was 3.8 x \'10 POT.-4\' mmol \'CH IND.4\'/g STV. The presence of iron reducing bacteria, after 60 days, was confirmed indirectly by the average rate of iron ferric reduction (90%). Filogenetics analysis (PCR/DGGE) compared the samples of this batch reactor - methanogenic and reduction of iron ferric -, with the samples of RAHLF - the biofilm in the reactor wall and the support material. The two condictions in batch reactors showed similarity of 79% and 92% respectively for the Bacteria and Archaea domain. Therefore, both samples of RAHLF showed 80% (Bacteria) and 96% (Archaea) of similarity. In other words, more similarity were presented due configuration of the reactor as well as the type of PCB added. As a result, the existence of PCBs degrading bacteria and iron-reducing bacteria in anaerobic biofilm, provided informations about the microbial consortium and its diversity in the presence of PCB.

Significant advances have been made in the understanding of living/controlled radical polymerization processes since their discovery in the early 1990’s. These processes enable an unprecedented degree of control over polymer architecture that was previously not possible using conventional radical polymerization processes, and this has made possible the synthesis of many new and interesting materials. However, there has been only limited success in commercializing these new methods. Recently there has been increased focus on the development of more industrially viable processes. Dispersed aqueous phase reactions have received much attention because these water-based processes have several technical, economic, and environmental benefits over the more common solution and bulk reactions that were originally developed. Likewise, there has been some investigation of using continuous reactors that have potential technical and economic benefits over the more commonly employed batch reactors. This thesis presents an in-depth study that combines the three aforementioned technologies: living/controlled radical polymerization, dispersed phase aqueous reactions, and continuous reactors. Specifically, the system of interest is a nitroxide-mediated miniemulsion polymerization reaction in a continuous tubular reactor to produce polymer latex. Design of the continuous tubular reactor is discussed in some detail with a focus on specific technical challenges that were faced in building a functional apparatus for this system. Scoping experiments are described which identified a significant effect of temperature ramping rate that is critical to understand when moving to larger scale reactors for this system. The unexpected phenomenon of room temperature polymerization initiated by ascorbic acid is also described. There is demonstration for the first time that bulk and miniemulsion polymers can be produced in a tubular reactor under controlled nitroxide-mediated polymerization conditions, and copolymers can be produced. A detailed residence time distribution study for the tubular reactor is also shown, and several interesting phenomena are discussed that have implications on the practical operating conditions of the tubular reactor. This particular study makes it clear that one should experimentally verify the residence time distribution within a continuous system with the reactants of interest, and that model systems may not give an accurate picture of the real system. / Thesis (Ph.D, Chemical Engineering) -- Queen's University, 2010-12-20 12:00:37.974

Bifenilas policloradas (PCBs) são compostos de difícil degradação presentes na composição de ascarel, muito utilizado como fluidos dielétricos e isolantes. Neste contexto, a presente pesquisa teve como objetivo avaliar a diversidade de microrganismos em biofilmes de reatores anaeróbios na presença de PCB empregando Métodos de Microbiologia de Anaeróbios Estritos e de Biologia Molecular. Em reator anaeróbio horizontal de leito fixo (RAHLF), alimentado com etanol, formiato, Triton X-100 (0,1%) e ascarel (1 mL/L), operado com tempo de detenção hidráulica (TDH) de 24 horas, foi retirado a comunidade microbiana do biofilme da espuma de poliuretano. Os grupos microbianos encontrados por meio da clonagem e sequenciamento do gene RNAr 16S para o domínio Bacteria foram relacionados aos filos Thermogae, Proteobacteria (Brachymonas petroleovorans, 100% de similaridade e Methylobacillus, 98% de similaridade), Firmicutes (Clostridium, 97% de similaridade, Syntrophomonas, 100% de similaridade e Sporomusa com 100% de similaridade), Synegistetes (Synergistes, 98% de similaridade), Spirochaetes (Leptonema illini, 98% de similaridade), Aminanaerobia, Deferribacteres, Chlorobi, Chloroflexi e Armatimonadetes. Além disso, como nesse biofilme foram identificadas bactérias redutoras de ferro, procedeu-se a sua quantificação por meio da técnica de tubos múltiplos (NMP, Número Mais Provável) obtendo 5,26 x \'10 POT.12\' NMP/g STV de bactérias redutoras de ferro. Ensaio em batelada foi realizado separadamente sob duas condições: (1) metanogênica e (2) ferro redutora. Em ambas as condições foram adicionadas aroclor 1260 (PCB). Os reatores, sob condição metanogênica, foram alimentados com meio de cultivo Angelidaki e substratos orgânicos (formiato e etanol), além de aroclor 1260 (0,2 \'mü\'g/L). Para simular a condição redutora de ferro foi acrescido ao meio de cultura Angelidaki, EDTA férrico (1,86 g/L). A produção de metano, na presença de aroclor 1260 foi de 3,8 x \'10 POT.-4\' mmol \'CH IND.4\'/g STV. A presença de bactérias ferro redutoras foi confirmada indiretamente pela taxa média de redução férrica (90%) nos reatores em batelada, após 60 dias de operação. Por meio de PCR/DGGE, elaborou-se um dendograma das amostras deste ensaio em batelada (metanogênico e redutor de ferro) comparativamente com as do reator RAHLF (biofilme presente na parede do reator e no material suporte). Os reatores em batelada apresentaram similaridade entre si de 79% e 92% para os domínios Bacteria e Archaea, respectivamente. As amostras do reator RAHLF foram 80% (Bacteria) e 96% (Archaea) similares. A existência de bactérias degradadoras de PCB, bem como, bactérias redutoras de ferro no biofilme anaeróbio contribuiu com informações sobre o consórcio microbiano e sua diversidade. / Polychlorinated biphenyls (PCBs) are compounds of difficult degradation, a component of askarel, which were used widely as coolants and lubricants. Hence, this study evaluated the diversity of microorganisms in the presence of PCBs in anaerobic reactors. For such, methods as Strict Anaerobic Microbiology and Molecular Biology were employed. The microbial community of the biofilm, developed in a fixed horizontal bed anaerobic reactor (RAHLF), was studied using the technique of cloning and sequencing of RNAr 16S gene for the Bacteria domain. The reactor had immobilized cells in polyurethane foam with ethanol and formate as a carbon source, Triton X-100 (0.1%) and polychlorinated biphenyls (1 mL/L), and operated with 24 hours HRT. The microbial groups found in this biofilm were related to phyla Thermogae, Proteobacteria (Brachymonas petroleovorans, 100% similarity and Methylobacillus, 98% similarity), Firmicutes (Clostridium, 97% similarity Syntrophomonas, and 100% similarity with Sporomusa 100% similarity), Synegistetes (Synergistes, 98% similarity), Spirochaetes (Leptonema Illini, 98% similarity), Aminanaerobia, Deferribacteres, Chlorobi, Chloroflexi and Armatimonadetes. Furthermore, as bacteria that reduce iron were found, we proceeded the quantification by the multiple tube method (MPN) for this group, obtaining 5.26 x \'10 POT.12\' MPN/g STV of iron-reducing bacteria. The batch reactors evaluated the growth of microorganisms in two condictions: (1) methanogenic e (2) iron reduction, both had the presence of PCBs (Aroclor 1260). The reactor, under methanogenic condition, was fed with synthetic substrate Angelidaki, ethanol and formate, used as carbon source, and aroclor 1260 (0.2 \'mü\'g /L). To simulate the condition of iron reducing, the same synthetic substrate was supplemented with ferric EDTA (1.86 g/L). The production of methane in the presence of aroclor 1260, was 3.8 x \'10 POT.-4\' mmol \'CH IND.4\'/g STV. The presence of iron reducing bacteria, after 60 days, was confirmed indirectly by the average rate of iron ferric reduction (90%). Filogenetics analysis (PCR/DGGE) compared the samples of this batch reactor - methanogenic and reduction of iron ferric -, with the samples of RAHLF - the biofilm in the reactor wall and the support material. The two condictions in batch reactors showed similarity of 79% and 92% respectively for the Bacteria and Archaea domain. Therefore, both samples of RAHLF showed 80% (Bacteria) and 96% (Archaea) of similarity. In other words, more similarity were presented due configuration of the reactor as well as the type of PCB added. As a result, the existence of PCBs degrading bacteria and iron-reducing bacteria in anaerobic biofilm, provided informations about the microbial consortium and its diversity in the presence of PCB.

Les propriétés mécaniques de films polymériques peuvent être considérablement améliorées par l'inclusion de nanoparticules au sein de la matrice du fait de deux effets majeurs : (i) la structure locale de la dispersion des charges et (ii) la modification potentielle de la dynamique et de la conformation des chaînes à l'interface charge/polymère. Néanmoins, les mécanismes précis qui permettent de relier ces contributions à l’échelle nanométrique aux propriétés macroscopiques des matériaux, et en particulier aux propriétés mécaniques, sont actuellement mal décrits. Dans ce contexte, nous avons synthétisé des nanocomposites modèles à base de nanoparticules magnétiques de maghémite γ-Fe2O3 (nues ou greffées d'une couronne de polystyrène (PS) par polymérisation radicalaire contrôlée) dispersées dans une matrice de PS, que nous avons caractérisé en couplant la diffusion de rayonnement (Rayons X et neutrons) et la microscopie électronique à transmission. En jouant sur différents paramètres tels que la taille des particules, la concentration, ou le rapport de taille entre les chaînes greffées et celles de la matrice pour les charges greffées, nous avons obtenu des nanocomposites présentant un éventail de dispersions de charges variées, contrôlées, parfaitement reproductibles, allant de particules individuelles ou d’agrégats ramifiés jusqu’à la formation d’un réseau de charges connecté. En appliquant un champ magnétique externe durant la synthèse des nanocomposites, nous sommes parvenus à aligner les différentes structures le long de la direction du champ et ainsi former des matériaux présentant des propriétés remarquables de renforcement anisotropes. La conformation des chaînes au sein des nanocomposites, déterminée expérimentalement grâce aux propriétés spécifiques de contraste neutronique du système, n'est pas affectée par la présence des charges, quels que soient le degré de confinement des chaînes, l’orientation, la dispersion ou l'état de surface des charges. L’alignement des charges sous champ magnétique a permis de décrire précisément l’évolution du module de renforcement des matériaux avec la réorganisation structurale locale des charges et des chaînes sous étirement, et de finalement mettre en évidence le rôle majeur joué par la réorganisation des charges sous déformation dans les mécanismes de renforcement. / The mechanical properties of polymeric nanocomposite films can be considerably enhanced by the inclusion of inorganic nanoparticles due to two main effects: (i) the local structure of fillers dispersion and (ii) the potential modification of the chains conformation and dynamics in the vicinity of the filler/polymer interface. However, the precise mechanisms which permit to correlate these contributions at nanometric scale to the macroscopic mechanical properties of the materials are actually poorly described. In such a context, we have synthesized model nanocomposites based on magnetic nanoparticles of maghemite γ-Fe2O3 (naked or grafted with a polystyrene (PS) corona by radical controlled polymerization) dispersed in a PS matrix, that we have characterized by combining small angle scattering (X-Ray and neutron) and transmission electronic microscopy. By playing on different parameters such as the particle size, the concentration, or the size ratio between the grafted chains and the ones of the matrix in the case of the grafted fillers, we have obtained nanocomposite films a large panel of controlled and reproducible controlled filler structures, going from individual nanoparticles or fractal aggregates up to the formation of a connected network of fillers. By applying an external magnetic field during the film processing, we succeeded in aligning the different structures along the direction of the field and we obtained materials with remarkable anisotropic reinforcement properties. The conformation of the chains of the matrix, experimentally determined thanks to the specific properties of neutron contrast of the system, is not affected by the presence of the fillers, whatever their confinement, the dispersion the fillers or their chemical state surface. The alignment of the fillers along the magnetic field has allowed us to describe precisely the evolution of the reinforcement modulus of the materials with the structural reorganization of the fillers and the chains at the local scale under stretching, and thus to highlight the key role played by the fillers reorganization under stretching on the nanocomposite reinforcement mechanisms.

Background: Increased pressure, rising demand and cost constraints have driven a need for radical service re-design in the NHS. To deliver re-design objectives it is necessary to understand how they are perceived by service users and providers. Aim: To investigate the views of patients and health care professionals (HCP) on aspects of health policy and service re-design affecting primary care. Setting: Patients and HCPs from one geographical area in England. Method: Themes from phase one qualitative interviews were explored quantitatively using a questionnaire in phase two and a discrete choice experiment (DCE) in phase three. Factor analysis was used to explore HCP responses in phase two. In phase three the DCE was administered to explore patients‟ relative priorities of a range of attributes. Results: HCPs had concerns that the Quality Outcomes Framework (QOF) detracted from the patient‟s agenda and did not improve health outcomes. GPs felt continuity of care was important Monday through Friday but were not keen on its provision out of hours. Neither did they feel nurses could run chronic disease management clinics without a GP present. Patients felt continuity could be provided by different HCPs for different conditionsPatients stated continuity of care and consultation duration were the most important attributes in a primary care service. However, in the DCE they prioritised both being seen on the day and by a GP over longer appointments. Patient preference to be seen by a GP may reflect the low uptake of non-medical prescribing in the area. Conclusion: Continuity of care, while remarked as being important to both HCPs and patients, appears less important when weighted against other primary care service attributes. HCPs appear to want longer consultations whereas patients saw time as encompassing both the time to wait for an appointment and consultation length. For patients, the quality of the time with a HCP may be more important than its duration, additionally patients appear to want choice but not necessarily to choose.

O presente estudo teve como objetivo avaliar a comunidade envolvida na desnitrificação autotrófica pela oxidação de sulfetos, aplicada ao pós-tratamento de efluentes anaeróbios. O enriquecimento da comunidade bacteriana e da comunidade desnitrificante autotrófica foi realizado a partir de amostras da biomassa coletadas de três reatores verticais de leito fixo operados em condições distintas, sendo, redução autotrófica de nitrato, redução autotrófica de nitrito e redução autotrófica de nitrato com excesso de sulfeto. Após a determinação da melhor condição de enriquecimento, a cultura foi purificada, identificada por meio de ferramentas da biologia molecular e caracterizada quanto às melhores condições de crescimento. O enriquecimento foi bem sucedido com a biomassa dos três reatores. No entanto, a condição de redução de nitrato com relação \'N\'/\'S\' igual a 0,8 foi a que apresentou maior concentração de microrganismos desnitrificantes autotróficos. A bactéria isolada foi identificada como Pseudomonas stutzeri. A velocidade específica máxima de crescimento da cultura (\'mü\'máx) foi de 0,037/h, com tempo de duplicação de 18,7 horas. O rendimento celular (Y) do composto nitrogenado foi de 0,15 gSSV.g/\'N\' e a velocidade de desnitrificação foi de aproximadamente 0,24 g\'N\'/gSSV.h. Os dados obtidos indicaram a viabilidade da aplicação da espécie isolada no processo de desnitrificação autotrófica utilizando sulfeto como doador de elétrons. / The aim of this study was to evaluate the community involved on autotrophic denitrification by sulfide oxidation applied to the post-treatment of anaerobic effluents. The enrichment of the bacterial community and autotrophic denitrifier community was accessed in three immobilized bed reactors operated at the conditions of autotrophic reduction of nitrate, autotrophic reduction of nitrite and autotrophic reduction of nitrate under excess of sulfide. Following the determination of the best enrichment conditions, the culture was purified, identified by molecular biology tools and the best growth conditions were characterized. Enriched cultures were obtained for the three operational conditions, but the best condition for the growth of autotrophic denitrifiers microorganisms was at \'N\'/\'S\' ratio of 0,8. The isolated microorganism was identified as Pseudomonas stutzeri. The maximum specific growth rate (\'mü\'máx) was 0.037/h, with a doubling time of 18.7 hours. The growth yield (Y) of nitrogen compound was 0.15 gSSV/g\'N\' and the specific rate of nitrogen utilization was approximately 0.24 g\'N\'/gSSV.h. The results indicated the viability of application of this microorganism for autotrophic denitrification using sulfide as electron donor.