Masters thessis deals with the problematics of wireless signal propagation modeling inside buildings. The theoretical part of this thessis describes principles and methods of electromagnetic waves spreading in open areas and in indoor deployment. There are also described methods used for calculating the path of signal propagation ray-launching and ray-tracing. This part also includes description of an algorithm and equations used for simulating 5GHz WiFi signal propagation inside the Department of telecommunications corridors. Second part of this thessis includes a description of a NS-3 module mmWave, which was used for simulations of IEEE 802.11ad (WiGig) standard. There are also results of these simulations and their detailed description. At the end of this thessis comparison of these results with values gained by real environment measurements can be found.

No description available.

The advent of 6th Generation (6G) wireless systems and the increasing demand for spectrum to accommodate a growing number of users and diverse services have necessitated novel ap- proaches to spectrum sharing. Among these approaches, distributed spectrum sharing offers the most flexibility by allowing real-time spectrum use based on user demand and network con- straints. However, this approach presents significant challenges due to the probabilistic nature of system dynamics and the autonomous behavior of each incumbent, which require advanced strategies to predict and manage spectrum usage effectively. Listen-Before-Talk (LBT) is the most widely adopted method for distributed spectrum sharing in unlicensed bands. While LBT has been extensively studied in the context of Wireless Fidelity (Wi-Fi), providing key insights into its performance under various conditions, its application in synchronized, slot-scheduled sys- tems like New Radio (NR) Unlicensed (NR-U) remains underexplored. This gap exists primarily due to the lack of hardware testbeds and system-level simulation platforms that are essential for evaluating the effectiveness of LBT in NR-U and for developing improved methods for operating in shared spectrums with deterministic worst-case delays. This thesis addresses the existing gap by proposing a reference architecture for spectrum sharing based on 5th Generation (5G) NR-U to facilitate further research and experimentation in distributed spectrum sharing. The approach taken in this thesis is threefold: (i) the establishment of a system architecture for an end-to-end 5G NR-U system based on existing work in hardware and simulation models; (ii) the realization of this system model on the Network Simulator 3 (ns-3) discrete-event simulator by leveraging developments from the 5G Long-Term Evolution (LTE) Enhanced Packet Core (EPC) Network Simulator (LENA) (5G-LENA) system architecture; and (iii) the conceptual design for implement- ing the Physical (PHY) layer of a 5G NR-U system using Software-Defined Radios (SDRs) and the OpenAirInterface (OAI) 5G software platform. A key novelty of this reference architecture is the proposed mitigation of LBT latency in split architectures with SDRs and General-Purpose Processors (GPPs). The LBT block is designed for implementation within the Field Program- ming Gate Array (FPGA) of Universal Software Radio Peripheral (USRP) SDRs, thereby enabling heterogeneous coexistence experimentation with Common Off-the-Shelf (COTS) Wi-Fi Access Points (APs). The thesis presents a simulation-based experiment that optimizes traffic manage- ment to improve the ability to serve delay-critical traffic in NR-U systems operating under ho- mogeneous coexistence conditions. The thesis then outlines a reference design for exploring heterogeneous coexistence between Wi-Fi and NR-U in the sub-7 GHz spectrum. This concep- tual framework leverages a proposed hardware experimentation platform with SDRs. The in- frastructure supporting these simulations and proposed hardware experiments is envisioned as virtualized resources over the Commonwealth Cyber Initiative (CCI) xG Testbed, with potential extensions for advanced spectrum sharing use cases across indoor and outdoor testbed sites. The thesis outlines potential enhancements to this testbed, specifically toward spectrum sharing with scheduled-access systems. / Master of Science / As wireless communication demand grows with the development of 6G, finding efficient ways to share the limited available spectrum has become increasingly important. One promising ap- proach is distributed spectrum sharing, which allows dynamic use of the spectrum based on real-time demands. However, this method faces challenges due to the unpredictable behavior of different users and devices, requiring sophisticated strategies to manage spectrum usage effec- tively. Currently, the most common method for distributed spectrum sharing is LBT, widely used in Wi-Fi networks. Although LBT has been well-studied in these environments, its use in systems like NR-U – a variant of 5G designed for unlicensed spectrum—has not been thoroughly explored. This gap exists mainly because there are few hardware testbeds and simulation platforms avail- able to study how LBT and other methods might work in real-world systems. This thesis aims to address this gap by developing a standardized platform for testing and experimenting with 5G NR-U technologies. The work involves three key steps: (i) designing a comprehensive system architecture for 5G NR-U; (ii) implementing this system in a simulation environment to study its performance; and (iii) proposing a design for key components using SDR and open-source soft- ware, creating a foundation for future hardware-based testing. To demonstrate the capabilities of this new platform, we conducted a simulation-based experiment focused on optimizing traffic management in NR-U systems to better handle delay-sensitive communications. Although no hardware experiments were conducted, the thesis provides a conceptual framework for future studies exploring how Wi-Fi and NR-U could coexist in the same frequency bands using the pro- posed hardware platform. The thesis concludes with suggestions for future improvements to the testbed, particularly in advancing spectrum sharing techniques with scheduled-access systems.

Submitted by João Arthur Martins (joao.arthur@ufpe.br) on 2015-03-11T18:10:20Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Dissertaçao JOSIAS de LIMA JUNIOR.pdf: 4252506 bytes, checksum: 714cb7aa7e2dc62943c697bd35a222ed (MD5) / Approved for entry into archive by Daniella Sodre (daniella.sodre@ufpe.br) on 2015-03-13T13:00:53Z (GMT) No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Dissertaçao JOSIAS de LIMA JUNIOR.pdf: 4252506 bytes, checksum: 714cb7aa7e2dc62943c697bd35a222ed (MD5) / Made available in DSpace on 2015-03-13T13:00:53Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Dissertaçao JOSIAS de LIMA JUNIOR.pdf: 4252506 bytes, checksum: 714cb7aa7e2dc62943c697bd35a222ed (MD5) Previous issue date: 2013-05 / Recent years have witnessed the emergence of new communication techniques in Computer Science that use both wireless technologies and self-organizing features. Their combination eliminates the need for using pre-defined wired structures and prior configurations. In this work, we develop a simulated version, using the network simulator 3 (ns-3), of the Heterogeneous Technologies Routing (HTR) framework that is suitable for interconnecting devices in a heterogeneous ad hoc network, extending its supported heterogeneous technologies with the addition of WiMAX and LTE devices, proposes an extension to enable multipath routing over this framework and investigates the impact of tuning routing parameters on convergence interval and energy consumption. Although a large number of works exist that investigate the tuning of routing parameter settings, to the best of our knowledge, none of them investigate the impact of these on protocol convergence and energy consumption. Multipath HTR routing, the extension we propose, offers several benefits such as load balancing, fault tolerance, routing loop prevention, energy-conservation, low end-to-end delay, and congestion avoidance, among others. This work performs a comparative analysis of the proposed HTR extension, with the baseline HTR, and the widely used Optimized Link State Routing (OLSR) protocol. Moreover, we investigate the impacts of tuning the HELLO refresh interval and perform a comparative analysis of the tuned HTR with the OLSR protocol. Both evaluations are validated through the simulation of heterogeneous technologies such as WiMAX, 3GPP LTE and Wi-Fi. Results show that the multipath extension effectively improves the data delivery ratio, and reduces the end-to-end delay without major impact on network energy consumption. For the tuned HTR, results show that varying the HELLO refresh interval can improve the convergence of the protocol and reduce the energy consumption. / Recentemente, novas técnicas de comunicação surgiram que usam tecnologia sem fio e são capazes de se autoconfigurar. A combinação desses fatores elimina a necessidade de utilizar estruturas cabeadas e configurações pré-definidas. Neste trabalho, o autor desenvolve uma versão simulada, através do simulador de rede “network Simulator 3” (ns-3), do arcabouço “Heterogeneous Technologies Routing” (HTR), que se propõe à interconectar dispositivos em redes heterogêneas ad hoc, estendendo o seu suporte às tecnologias heterogêneas com a adição de dispositivos WiMAX e LTE, propõe uma extensão para fornecer um roteamento baseado em múltiplos caminhos (“Multipath”) e investiga o impacto de modificar os parâmetros de configuração do roteamento no tempo de convergência da rede e consumo de energia. Apesar de um grande número de obras existentes que investigam o impacto da mudança de parâmetros de configuração do roteamento, no meu conhecimento, nenhum deles investiga o impacto destes no tempo de convergência do protocolo e consumo de energia. O “Multipath HTR”, a extensão proposta, oferece vários benefícios como balanceamento de carga, tolerância a falhas, prevenção de “loops” de roteamento, conservação de energia, baixo atraso fim-a-fim, e evita o congestionamento, entre outros. Este trabalho faz uma análise comparativa da extensão ao HTR proposta, com a base do HTR, e o protocolo amplamente utilizado “Optimized Link State Routing” (OLSR). Além disso, o esse trabalho investiga o impacto de variar o intervalo de envio de mensagens de HELLO e realiza uma análise comparativa do HTR modificado (“Tuned HTR”) com o protocolo OLSR. As duas avaliações são realizadas através de simulação usando tecnologias heterogêneas como WiMAX, 3GPP LTE e Wi-Fi. Resultados mostram que a extensão de múltiplos caminhos proposta melhora a taxa de transmissão de dados, e reduz o atraso fim-a-fim sem maiores impactos no consumo de energia da rede. Para o “Tuned HTR”, resultados mostram que a variação do intervalo de envio de mensagens de HELLO pode melhorar a convergência do protocolo e reduz o consumo de energia.

This diploma thesis deals with the possibility of using HDLC (High-Level Data Link Control) protocol for communication and addressing of smart metering devices with a data concentrator. The HDLC protocol is used in two DLMS/COSEM (Device Language Message Specification/Companion Specification for Energy Metering) communication profiles. To simulate these communication profiles, the most appropriate simulation program is selected. Using this simulator, the first communication profile is implemented and the second one is designed. Communication profile based on TCP/IP (Transmission Control Protocol/Internet Protocol) has been fully implemented. To implement the three-layer HDLC communication profile, all options have been thoroughly explored. Using these findings, a process was designed to guide the full implementation. For the first communication profile the qualitative parameters are measured, which are then plotted and evaluated.

This diploma thesis analyzes the PLC communications in various scenarios. The first part of the thesis describes the principle of narrowband and broadband communication and the analysis of electrical lines. The next part describes the NS-3 framework, simulation scenarios for establishment the effect of branches and other parameters on the baud rate. The last part determines the minimum number of repeaters and their location on the extended topology.

No description available.