Les applications d’électronique de spin telles les mémoires à accès aléatoire (MRAM), les capteurs (e.g.les têtes de lecture des disques durs d’ordinateurs) et les éléments de logique magnétique utilisent les interactionsd’échange ferromagnétique/antiferromagnétique (F/AF) dans le but de définir une direction de référence pour lespin des électrons de conduction. Les MRAM à écriture assistée thermiquement (TA-MRAM) utilisent mêmedeux bicouches F/AF : une pour le stockage de l’information et l’autre comme référence. Ces dernièresapplications technologiques impliquent des étapes de nanofabrication des couches minces continues pour formerune matrice de cellules mémoires individuelles. La qualification industrielle du produit final impose de sérieusescontraintes sur la largeur des distributions des propriétés magnétiques - y compris d’échange F/AF - de cellulemémoire à cellule mémoire. Des phases verres de spin réparties de manière aléatoire sur la couche continue, àl’interface F/AF ou dans le coeur de l’AF pourraient contribuer de manière significative à ces distributionsd’échange F/AF dans les dispositifs, après nanofabrication ; comme supposé il y a de cela quelques années. Lebut de cette thèse est d’étudier factuellement le possible lien entre verre de spin répartis dans des couches mincesF/AF et dispersions de propriétés d’échange de cellule mémoire à cellule mémoire dans les dispositifs TAMRAMcorrespondants. Avant cela, l’origine de ces régions verre de spin a été étudiée et une attention plusparticulière a été portée au rôle joué par les diffusions de Mn. Ces dernières ont été directement observées,comprises et l’utilisation de barrières complexes pour les réduire et par là même pour diminuer la quantité dephases verre de spin a été mise en oeuvre avec succès. En guise d’alternative pour varier la quantité de verres despin, l’utilisation d’AFs composites a été également étudiée dans le cadre de cette thèse. Ce type d’AF permet dumême coup de varier la stabilité thermique des grains AF et de répondre à un autre problème identifié pour lesTA-MRAM qui consiste à trouver des matériaux AF avec des propriétés de rétention et d’écriture intermédiairespar rapport aux matériaux actuellement utilisés. Finalement, ces AFs composites ont été utilisés comme moyende varier la quantité de verres de spin dans des dispositifs TA-MRAM réels et de prouver le lien direct avec ladispersion de propriétés de cellule mémoire à cellule mémoire. / Spintronics applications such as magnetic random access memories (MRAM), sensors (e.g.. hard diskdrive read head) and logic devices use ferromagnetic/antiferromagnetic (F/AF) exchange bias (EB) interactionsto set the reference direction required for the spin of conduction electrons. Thermally-assisted (TA-) MRAMapplications even use two F/AF exchange biased bilayers: one for reference and one for storage. Suchtechnological applications involve patterning full sheet wafers into matrix of individual bit-cells. Industrialproducts qualification imposes stringent requirements on the distributions of the magnetic properties from cell tocell, including those related to EB. It was supposed few years ago that randomly spread spin-glass like phases atthe F/AF interface or within the bulk of the AF layer significantly contribute to the distributions of EB propertiesin devices after processing. This thesis aimed at factually studying the link between spin-glasses spread overF/AF thin films and bit-cell dispersions of EB in corresponding TA-MRAM. Prior to that the origin of the spinglasslike regions and more specifically the role of Mn-diffusion was consolidated. Mn-diffusion was directlyobserved, understood and the use of complex barriers to reduce such diffusion and consequently to minimize theamount of spin-glass was successfully studied. Mixing AFs as another way to tune the amount of spin-glass likephases was also evidenced in the framework of this thesis. All at once, this last solution also tuned the AF grainsthermal stability and this solved another issue related to TA-MRAM, i.e. finding AF-materials with intermediateretention and write properties compared to the AFs presently used. Finally, those mixed antiferromagnets werethe mean chosen to tune the amount of spin-glass like phases in real TA-MRAM devices and to factually provetheir link with bit-cell distributions of EB properties.

Titania has been the focus of attention for several decades owing to its chemical stability, non-toxicity, inexpensiveness and robust surface chemistry. Its technological applications include use in diverse areas such as photocatalytic reactors, antibacterial coatings, dye sensitive solar cells (DSSC) and more recently the perovskite solar cells to name a few. All of these applications are based on the ability to inject or generate electronhole pairs in titania and transport them to a suitable interface at which they are ejected to either engender a reaction as in photocatalysis or drive a load as in photovoltaics. From a technological perspective it is also important that such science be achieved and controlled in supported titania structures. The research reported in this thesis, thus, started with the development of a process for obtaining adherent titania films by oxidation of sputtered Ti films on stainless steel, a very commonly used substrate. Challenges that had to be overcome included the need to oxidize titanium to obtain the right phase mixture while preventing film cracking or delamination due to compressive stresses generated during anodic oxidation of Ti. During this process of obtaining nanostructured TiO2 through anodization, it was serendipitously discovered that planar TiO2 films obtained by oxidation of sputtered Ti films did significantly better than anodized nanoporous titania in bactericidal studies. This was then replicated in organic dye degradation studies. Analysis of the material showed that this improved performance was due to the unintentional contamination during sputtering by Cu, Zn, Mo possibly due to arcing across brass contacts. This quaternary system was then systematically explored and it was shown that an optimal metastable composition in the Ti- Cu-Mo oxide ternary system performs the best. DFT studies showed that this was due to introduction of shallow and deep states in the band gap that, depending on the level of dopants, either enhances carrier lifetimes or leads to recombination. In continuation of this work on supported titania structures by oxidation of Ti, a novel photoanode for use in dye sensitized photovoltaics was developed by oxidation of Ti foam. This results in an interconnected 3-D network of TiO2 that possess at its core a network of Ti. Such architecture was designed to provide a large surface area for anchoring the sensitizer while simultaneously reducing the distance that charge carriers have to travel before reaching the ohmic contacts to prevent recombination losses. The thesis discusses the preparation of such anodes, the properties of the 3-D oxide and cells, with up to 4% efficiency, developed using such anodes. Reasons for such behaviour and avenues for further exploration to improve cell efficiency will also be discussed.

Ce travail porte sur l'étude d'hétérostructures de semiconducteurs II-VI à alignements de bande de type II, en particulier sous forme de superréseaux. Il s'agit d'un système qui peut être prometteur pour une application photovoltaïque, et c'est dans cette optique qu'est orienté ce travail. Une première partie traite ainsi d'une réflexion conceptuelle sur l'apport des interfaces de type II au photovoltaïque.Nous présentons ensuite une étude sur la croissance de CdSe et ZnTe par épitaxie par jets moléculaires, sur différents substrats. Ces matériaux sont particulièrement intéressants et adaptés pour cette application car ils ont un gap direct, quasiment le même paramètre de maille, un alignement de bandes de type II, et le CdSe une bande interdite compatible avec le spectre solaire. Mais en contrepartie il s'agit de semiconducteurs binaires qui n'ont aucun atome en commun, de sorte que la croissance d'échantillons avec des épaisseurs précises à la monocouche près constitue un vrai défi. Pour cette raison nous avons procédé à une étude fine des interfaces grâce à des analyses de diffraction de rayons X et de microscopie en transmission, qui nous permet de conclure sur la nature chimique des atomes à proximité des interfaces.Vient ensuite une étude poussée de spectroscopie sur les effets des interfaces de type II sur les porteurs de charges, à travers leur énergie et cinétique de recombinaison. Nous avons développé un modèle analytique qui permet d'ajuster précisément toutes les caractéristiques observées en relation avec ces interfaces, et qui témoigne d'un mécanisme de séparation des charges très efficace. Nous montrons par la suite que ces effets observés sont des caractéristiques intrinsèques de toutes les interfaces de type II, indépendamment des matériaux et des structures, et que ceux-ci nous permettent d'extraire avec précision les valeurs des décalages de bandes entre différents matériaux à alignement de type II. / This work focuses on the study of II-VI semiconductor heterostructures with type II band alignments, especially in the form of superlattices. This is a system that can be promising for photovoltaic applications, and my work is presented in this perspective. Thus the first part deals with a conceptual reflection on the contribution of type II interfaces for photovoltaics.In a second step I present a study on the growth of CdSe and ZnTe by molecular beam epitaxy on various substrates. These materials are particularly interesting and suitable for this application because they have a direct bandgap, are almost lattice-matched, present a type II band alignment, and CdSe shows a bandgap compatible with the solar spectrum. But in return these are binary semiconductors which have no atoms in common, so that the growth of samples with specific thicknesses close to the monolayer is challenging. For this reason we conducted a detailed study at the interfaces through analysis of X-ray diffraction and transmission electron microscopy, which allows us to conclude on the chemical nature of the atoms near the interfaces.This is followed by a detailed spectroscopy study on the effects of type II interfaces on the charge carriers through their energy and kinetics of recombination. We have developed an analytical model that allows to precisely adjust all the features observed in relation to these interfaces, and shows a very efficient charge separation mechanism. We show later that these effects are inherent characteristics of all interfaces of type II, regardless of materials and structures, and that they allow us to accurately extract the values of band offsets between different materials with type II band alignments.

There are many challenges in materializing the applications utilizing inorganic nanoparticles. The primary drawback is the degradation of properties due to aggregation and sintering either due to elevated temperatures or prevailing chemical/electrochemical conditions. In this thesis, various wet chemical synthesis methods are developed to obtain metal nanostructures with enhanced thermal stability. The thesis is organized as below: Chapter 1 presents the problems and challenges in materializing the application of nanomaterials associated with the thermal stability of nanomaterials. A review of the existing techniques to improve the thermal stability and the scope of the thesis are presented. Chapter 2 gives a summary of the various materials synthesized, the method adopted for the synthesis and the characterization techniques used in the material characterization. Chapter 3 presents a general template-less strategy for the synthesis of nanoporous alloy aggregates by controlled aggregation of nanoparticles in the solution phase with excellent control over morphology and composition as illustrated using PdPt and PtRu systems as examples. The Pt-based nanoporous clusters exhibit excellent activity for methanol oxidation with good long term stability and CO tolerance. Chapter 4 presents a detailed study on the thermal stability of spherical mesoporous aggregates consisting of nanoparticles. The thermal stability study leads to a general conclusion that nanoporous structures transform to hollow structures on heating to elevated temperatures before undergoing complete densification. Chapter 5 presents a simple and facile method for the synthesis of single crystalline intermetallic PtBi hollow nanoparticles. A mechanism is proposed for the formation of intermetallic PtBi hollow structures. The intermetallic PtBi hollow structures synthesised show excellent electrocatalytic activity for formic acid oxidation reaction. Chapter 6 presents a robust strategy for obtaining a high dispersion of ultrafine Pt and PtRu nanoparticles on graphene. The method involves the nucleation of a metal precursor phase on graphite oxide surfaces and subsequent reduction with a strong reducing agent. The electrocatalytic activity of the composites is investigated for methanol oxidation reaction. Chapter 7 presents a microwave-assisted synthesis method for selective heterogeneous nucleation of metal nanoparticles on oxide supports leading to the synthesis of high activity catalysts. The catalytic activity of the hybrids synthesized by this method for investigated for H2 combustion. Chapter 8 presents thermal stability studies carried out on nanostructures by in-situ heating in transmission electron microscope. The microstructural changes during the sintering process are observed in real time and the observations lead to the understanding of the mechanism of particle growth and sintering. At the end, the results of the investigations were summarized with conclusions drawn.

No description available.

Solar thermal energy is emerging as an important source of renewable energy for meeting the ever-increasing energy requirements of the world. Solar selective coatings are known to enhance the efficiency of the photo thermal energy conversion. An ideal solar selective coating has zero reflectance in the solar spectrum region (i.e., 0.3-2.5 µm) and 100% reflectance in the infrared (IR) region (i.e. 2.5-50 µm). In this thesis, novel carbon nanotubes (CNT) and graphene based absorbers have been developed for photo thermal applications. Carbon nanotubes have good optical properties (i.e., α and ε close to 1), high aspect ratios (> 150), high surface area (470 m2/g) and high thermal conductivity (> 3000 W/mK), which enable rapid heat transfer from the CNTs to the substrates. Similarly, graphene also exhibits high transmittance (97%), low reflectance, high thermal conductivity (5000 W/mK) and high oxidation resistance behaviour. The major drawback of using CNTs for photothermal applications is that it exhibits poor spectral selectivity (i.e., α/ε = 1). In other words, it acts as a blackbody absorber. On the other hand, graphene exhibits poor intrinsic absorption behaviour (α - 2.3%) in a broad wavelength range (UV-Near IR). The main objective of the present study is to develop CNT and graphene based absorbers for photothermal conversion applications. The growth of CNT and graphene was carried out using chemical vapour deposition and sputtering techniques. An absorber-reflector tandem concept was used to develop the CNT based tandem absorber (Ti/Al2O3/Co/CNT). The transition from blackbody absorber to solar selective absorber was achieved by varying the CNT thicknesses and by using a suitable underlying absorber (Ti/Al2O3). A simple multilayer heat mirror concept was used to develop the graphene based multilayer absorber (SiO2/graphene/Cu/graphene). The transition from high transmitance to high absorptance was achieved by varying the Cu thickness. The refractive indices and the extinction coefficients of Ti/Al2O3, AlTiO and graphene samples were determined by the phase-modulated spectroscopic ellipsometric technique. Finally, the optical properties (i.e., absorptance and the emittance) of the CNT and graphene based absorbers were investigated. Chapter 1 gives a brief introduction about solar thermal energy, spectrally selective coating and photothermal conversion. The different types of absorbers used to achieve the spectral selectivity have also been discussed shortly. A brief description about the carbon-based materials/allotropes and their properties are outlined. The properties of carbon nanotubes and graphene which are the 1-D and 2-D allotropes of carbon, respectively are tabulated. A detailed literature survey was carried out in order to identify the potential candidates for the photothermal conversion applications. The objectives and the scope of the thesis are also discussed in this chapter. Chapter 2 discusses the deposition and characterization techniques used for the growth and the study of 1-D and 2-D carbon nanostructures. Atmospheric pressure chemical vapour deposition (CVD) and hot filament CVD techniques were used to grow CNT and graphene, respectively. The magnetron sputtering technique was used for the growth of ‘Ti’, ‘Al2O3’ and Co layers which were needed to grow the CNT based tandem absorber on stainless steel (SS) substrates. The important characterization techniques used to examine various properties of the 1-D and 2-D carbon nanostructures include: X-ray diffraction, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), phase modulated ellipsometry, UV-VIS-NIR spectrophotometer, Fourier-infrared spectroscopy (FTIR), micro-Raman spectroscopy and solar spectrum reflectometer and emissometer. Chapter 3 describes the design and development of Ti/Al2O3 coating for the growth of CNT-based tandem absorber on SS substrates. The power densities of the aluminum and titanium targets and the oxygen flow rates were optimized to deposit the Ti/Al2O3 coatings. The optimized Ti/Al2O3 coating with a Co catalyst on top was used as an underlying substrate to grow the CNT-based tandem absorber at 800°C in Ar+H2 atmosphere (i.e., CNT/Co/Al2O3/Ti/SS). The formation of aluminum titanium oxide (AlTiO) was observed during the CNT growth process and this layer enhances the optical properties of the CNT based tandem absorber. The optical constants of Ti, Al2O3 and AlTiO coatings were measured using phase modulated spectroscopic ellipsometry in the wavelength range of 300-900 nm. The experimentally measured ellipsometric parameters have been fitted with the simulated spectra using the Tauc-Lorentz model for generating the dispersion of the optical constants of the Al2O3 and the AlTiO layers. The Ti and Al2O3 layer thicknesses play a major role in the design of the CNT based tandem absorber with good optical properties. Chapter 4 describes the synthesis and characterization of the CNT based tandem absorber (Ti/AlTiO/CoO/CNTs) deposited on SS substrates. CNTs at different thicknesses were grown on Ti/AlTiO/CoO coated SS substrates using atmospheric CVD at various growth durations. The transition from blackbody absorber to solar selective absorber was achieved by varying the thicknesses of the CNTs and by suitably designing the bottom tandem absorber. At thicknesses > 10 µm, the CNT forest acts as near-perfect blackbody absorber, whereas, at thicknesses ≤ 0.36 µm, the IR reflectance of the coating increases (i.e., ε = 0.20) with slight decrease in the absorptance (i.e., α = 0.95). A spectral selectivity (α/ε) of 4.75 has been achieved for the 0.36 µm-thick CNTs grown on SS/Ti/AlTiO/CoO tandem absorber. Chapter 5 discusses the growth of graphene on polycrystalline copper (Cu) foils (1 cm × 1 cm) using hot filament CVD. The roles of the process parameters such as gas flow rates (methane and hydrogen), growth temperatures (filament and substrate) and durations on the growth of graphene were studied. The process parameters were also optimized to grow monolayer, bilayer and multilayer graphene in a controlled manner and the growth mechanism was deduced from the experimental results. The presence of graphene on Cu foils was confirmed using XPS, micro-Raman spectroscopy, FESEM and TEM techniques. The FESEM data clearly confirmed that graphene starts nucleating as hexagonal islands which later evolves into dendritic lobe shaped islands with an increase in the supersaturation. The TEM data substantiated further the growth of monolayer, bilayer and multilayer graphene. The intensity of 2D and G peak ratio (i.e., I2D/IG = 2) confirmed the presence of the monolayer graphene and the absence of the ‘D’ peak in the Raman spectrum indicated the high purity of graphene grown on Cu foils. The results show that the polycrystalline morphology of the copper foil has negligible effect on the growth of monolayer graphene. In Chapter 6, the design and development of graphene/Cu/graphene multilayer absorber and the study of its optical properties are discussed. The multilayer graphene grown on Cu foils has been transferred on quartz and SiO2 substrates in order to fabricate the graphene/Cu/graphene multilayer absorber. The sputtering technique was used to deposit copper on top of graphene/quartz substrates. The uniformity of the transferred multilayer graphene films was confirmed using Raman mapping. A simple multilayer heat mirror concept was used to develop the graphene/Cu/graphene absorber on quartz substrates and the transition from high transmittance to high absorptance was achieved. In order to further enhance the absorption, the graphene/Cu/graphene multilayer coating was fabricated on SiO2 substrates. The thickness of the Cu layer plays a major role in creating destructive interference, which results in high absorptance and low emittance. A high specular absorptance of 0.91 and emittance of 0.22 was achieved for the SiO2 graphene/Cu/graphene multilayer absorber. The specular reflectance of the multilayer absorber coatings was measured using the universal reflectance accessory of the UV-VIS-NIR spectrophotometer. Chapter 7 summarizes the major findings of the present investigation and also suggests future aspects for experimentation and analysis. The results obtained from the present work clearly indicate that both CNT and graphene based absorbers can be used as potential candidates for photothermal applications. In particular, the CNT based tandem absorber can be used for high temperature solar thermal applications and the graphene based multilayer absorber finds applications in the area of photodetectors and optical broadband modulators.

Cette thèse conclut 3 années d'études doctorales sur le "dépôt de couches atomiques (ALD) de nitrure de bore (BN)". Le but de ce travail a été d'adapter la voie des céramiques dérivées de polymères (PDC) à la technique ALD pour la croissance de films minces de h-BN et l'élaboration de nanostructures fonctionnelles. Tout d'abord, un nouveau procédé d'ALD sans ammoniac en deux étapes, comprenant une croissance par ALD à basse température (80 °C) de polyborazine (PBN) à partir de 2,4,6-trichloroborazine et d'hexaméthyldisilazane suivi un traitement thermique à haute température sous atmosphère contrôlée a été développé. Ainsi, des films minces uniformes et homogènes de BN ont pu être déposés sur divers substrats. Le caractère autolimité des réactions mises en jeu ainsi que l'homogénéité des films sur des supports très structurés ont été vérifiés. De ce fait des nanostructures fonctionnelles BN ont été réalisées à partir de substrats ou de templates de dimensionnalité variée. Leurs applications en tant que revêtements protecteurs et comme filtres et éponges absorbantes pour purifier les eaux polluées par des hydrocarbures ont en particulier été étudiées. Enfin, un deuxième procédé ALD basse température (85-150°C) utilisant le tri(isopropylamino)borane et la méthylamine comme précurseurs a été préalablement étudié afin de confirmer l'adaptabilité de la voie PDC et la technique ALD. Des films minces de BN ont été obtenus sur des substrats plans et il a été prouvé que les vapeurs de tri(isopropylamino)borane peuvent infiltrer des fibres de polyacrylonitrile électrofilées.Ce travail a été entièrement réalisé à l'Université de Lyon et a reçu le soutien financier du China Scholarship Council (CSC) pour la bourse de doctorat ainsi que de l'Agence Nationale de la Recherche (projet n° ANR-16-CE08-0021-01) / This thesis achieves 3 years of PhD studies on “Atomic layer deposition (ALD) of boron nitride (BN)”. The aim of this PhD work is to adapt the polymer derived ceramics (PDCs) route to the ALD technique for h-BN thin film growth and elaboration of functional nanostructures. A novel two-step ammonia-free ALD process, which includes ALD deposition of polyborazine at low temperature (80 °C) from 2,4,6-trichloroborazine and hexamethyldisilazane followed by post heat treatment under controlled atmosphere, has been established. Conformal and homogeneous BN thin films have been deposited onto various substrates. The self-limitation of the reactions on flat substrates and the conformality of the films on structured substrates have been verified. Functional BN nanostructures have thus been fabricated using substrates or templates with different dimensionalities. In particular, their applications as protective coatings as well as filter and absorber to purify polluted water from organic/oil hav e been investigated. Finally, a second low temperature (85-150 °C) ALD process using tri(isopropylamine)borane and methylamine as precursors has preliminary been studied in order to confirm the adaptability of PDCs route to ALD technique. BN thin films have been grown onto flat substrate and it has been proven that tri(isopropylamino)borane vapor can infiltrate into electrospun polyacrylonitrile fibers.This work was carried out at University of Lyon and financially supported by the National Research Agency (project n° ANR-16-CE08-0021-01)

One-dimensional (1D) nanostructures have gained tremendous attention over the last decade due to their wide range of potential applications. Particularly, ZnO 1D nanostructures have been investigated with great interest due to their versatility in synthesis with potential applications in electronics, optics, optoelectronics, sensors, photocatalysts and nanogenerators. The thesis deals with the challenges and the answer to grow ZnO 1D nanostructure by vapor phase transport (VPT) continuously without any length limitation. The conventional VPT technique has been modified for the non-catalytic growth of ultralong ZnO 1D nanostructures and branched structures in large area with controllable aspect ratio. It has been shown that the aspect ratio can be controlled both by thermodynamically (temperature) and kinetically (vapour flux). The thesis also deals with the fabrication of carbon nanotube (CNT) -ZnO based multifunctional devices and the field emission performance of ZnO nanowires by employing various strategies. The entire thesis has been organised as follows: Chapter 1 deals with Introduction. In this chapter, importance of ultralong nanowires and significance of ultralong ZnO nanowires has been discussed. Various efforts to grow ultralong ZnO nanowire with their advantages and disadvantages have been summarised. Lastly the significance of forming ZnO nanowires based nano hybrid structures and importance of doping in ZnO nanowires and has also been discussed. Chapter 2 deals with experimental procedure and characterization. In this chapter, a single step VPT method for the growth of ultralong ZnO nanowires that incorporates local oxidation barrier for the source has been described. The synthesized nanowires were characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman & photoluminescence. Chapter 3 deals with growth of ZnO nanowires, controlling the aspect ratio of ZnO nanowires, and role of other experimental aspects. In this chapter, a way to grow nanowires continuously without any apparent length limitation, a way to control the diameter of the nanowires kinetically without catalyst particle or seed layer and obtaining smaller diameter of the nanowires by non-catalytic growth as compared to that set by the thermodynamic limit has been discussed. Furthermore, the significance and importance of local oxidation barrier on source for protecting them from degradation, ensuring the continuous supply of vapour and enabling the thermodynamically and kinetically controlled growth of nanowires has been discussed. Lastly, the scheme for large area deposition and a method to use same source material for several depositions has been presented. Chapter 4 deals with multifunctional device based on CNT -ZnO Nanowire Hybrid Architectures same device can be used as a rectifier, a transistor and a photodetector. In this chapter, the fabrication of CNT arrays-ZnO nanowires based hybrid architectures that exhibit excellent high current Schottky like behavior with p-type conductivity of ZnO has been discussed. CNT-ZnO hybrid structures that can be used as high current p-type field effect transistors (FETs) and deliver currents of the order of milliamperes has been presented. Furthermore, the p-type nature of ZnO and possible mechanism for the rectifying characteristics of CNT-ZnO has been discussed. Lastly, the use of hybrid structures as ultraviolet detectors where the current on-off ratio and the response time can be controlled by the gate voltage has been presented and also an explanation for photoresponse behaviour has been provided. Chapter 5 deals with the substrate-assisted doping of ZnO nanowires grown by this technique. In this chapter, the non-catalytic growth of ZnO nanowires on multiwalled carbon nanotubes (MWCNTs) and soda lime glass (SLG) with controlled aspect ratio has been presented. The elemental mapping to confirm the presence and distribution of carbon and sodium in ZnO nanowires and the transport studies on both carbon and sodium doped ZnO has also been presented. Furthermore the stability of carbon doped ZnO has also been presented. Lastly, the advantage of growing ZnO nanowires on MWCNTs and overall advantage associated with this technique has been discussed. Chapter 6 deals with formation of ZnO nanowire branched structures. In this chapter, a possibility to grow ZnO nanowires on already grown ZnO nanowires has been demonstrated. The formation of branched structure during multiple growth of ZnO nanowire on ZnO nanowire has been presented and evolution of aspect ratio in these branched structures has been discussed. Furthermore, the advantage of using ZnO branched structures and also the ZnO nanoneedles on MWCNT mat for field emission has been presented. Chapter 7 summarizes all the findings of the thesis.

Materials for studies related to nanoscience and nanotechnology have gained tremendous attention owing to their unique physical, chemical and electronic properties. Among various anisotropic nanostructures, one dimensional (1D) materials have received immense interest in numerous fields ranging from catalysis to electronics. Imparting multi-functionality to nanostructures is one of the major areas of research in materials science. In this direction, use of nanosized materials in energy systems such as fuel cells has been the subject of focus to achieve improved performance. Tuning the morphology of nanostructures, alloying of catalysts, dispersing catalytic particles onto various supports (carbon nanotubes, carbon nanofibers, graphene, etc.) are some of the ways to address issues related to electrochemical energy systems. It is worth mentioning that highly stable and corrosion resistant electrodes are mandatory as electrochemical cells operate under aggressive environments. Additionally, carbon, which is often used as a support for catalysts, is prone to corrosion and is subsequently implicated in reduced performance due to poor adherence of catalyst particles and loss in electrochemically active area. Hence, there is a quest for the development of stable and durable electrocatalysts / supports for various studies including fuel cells. The present thesis is structured in exploring the multi-functional aspects of titanium carbide (TiC), an early transition metal carbide. TiC, a fascinating material, possesses many favorable properties such as extreme hardness, high melting point, good thermal and electrical conductivity. Its metal-like conductivity and extreme corrosion resistance prompted us to use this material for various electrical and electrochemical studies. The current study explores the versatility of TiC in bulk as well as nanostructured forms, in electrical and electrochemical studies towards sensing, electrocatalytic reactions and active supports. 1D TiC nanowires (TiC-NW) are prepared by simple solvothermal method without use of any template and are characterized using various physico-chemical techniques. The TiC-NW comprise of 1D nanostructures with several µm length and 40 ± 15 nm diameter (figure 1). Electrical properties of individual TiC-NW are probed by fabricating devices using focused ion beam deposition (FIB) technique. The results depict the metallic nature of TiC-NW (figure 2). Figure 1. (a) SEM, (b) TEM and (c) HRTEM images of TiC-NW prepared by solvothermal method. Figure 2. (a) SEM image and (b) I-V characteristics of TiC-NW - based device as a function of temperature. The contact pads are made of Pt. Subsequently, oxidized TiC nanowires are prepared by thermal annealing of TiC-NW, leading to carbon - doped TiO2 nanowires (C-TiO2-NW) (figure 3). Photodetectors are fabricated with isolated C-TiO2-NW and the device is found to respond to visible light (figure 3) radiation with very good responsivity (20.5 A/W) and external quantum efficiency (2.7 X 104). The characteristics are quite comparable with several reported visible light photodetectors based on chalcogenide semiconductors. Figure 3. (a) HRTEM, (b) EDAX, (c) Scanning TEM-DF images of C-TiO2-NW along with (d) Ti (e) O and (f) C mapping. (g) Current – voltage curves of single C-TiO2-NW recorded in dark (black) and in presence of visible light radiation (red) of intensity 57.7 mW/cm2 at 25oC. Inset of (g) shows the SEM image of the device (top) and schematic illustration of fabricated photodetector (bottom). The next chapter deals with the electrochemical performance of TiC demonstrated for studies involving oxygen reduction and borohydride oxidation reactions. Electrochemical oxygen reduction reaction (ORR) reveal that TiC-NW possess high activity for ORR and involves four electron process while it is a two electron reduction for bulk TiC particles (figure 4). The data has been substantiated by density functional theory (DFT) calculations that reveal different modes of adsorption of oxygen on bulk and nanowire morphologies. Stable performance is observed for several hundreds of cycles that confirm the robustness of TiC. The study also demonstrates excellent selectivity of TiC for ORR in presence of methanol and thus cross-over issue can be effectively addressed in direct methanol fuel cells. In the chapter on borohydride oxidation, bare TiC electrode is explored as a catalyst for the oxidation of borohydride. One of the major issues in direct borohydride fuel cells (DBFC) is the hydrolysis of borohydride that happens on almost all electrode materials leading to low efficiency. The present study reveals that TiC is a very good catalyst for borohydride oxidation with little or no hydrolysis of borohydride [figure 5 (a)] under the experimental conditions studied. Further, shape dependant activity of TiC has been studied and fuel cell performance is followed [figure 5 (b)]. Polarization data suggests that the performance of TiC is quite stable under fuel cell experimental conditions. Figure 4. (a) Linear sweep voltammograms for ORR recorded using (i) bulk TiC particles and (ii) TiC-NW in O2-saturated 0.5 M KOH at 1000 rpm. Scan rate used is 0.005 Vs-1. (b) Variation of number of electrons with DC bias. Black dots correspond to TiC bulk particles while red ones represent nanowires. Figure 5. (a) Cyclic voltammograms of borohydride oxidation on TiC coated GC electrode in 1 M NaOH containing 0.1 M NaBH4. Scan rate used is 0.05 Vs-1. (b) Fuel cell polarization data at 70oC for DBFC assembled with (i) bulk TiC particles and (ii) TiC-NW as anode catalysts and 40 wt% Pt/C as cathode. Anolyte is 2.1 M NaBH4 in 2.5 M NaOH, and catholyte is 2.2 M H2O2 in 1.5 M H2SO4. Anode loading is 1.5 mg cm-2 and cathode loading is 2 mg cm-2. The corrosion resistance nature of TiC lends itself amenable to be used as an active support for catalytic particles (Pt and Pd) for small molecules oxidation reactions. In the present study, electro-oxidation of methanol, ethanol and formic acid have been studied. As shown in figure 6 (a), the performance of Pd loaded TiC (Pd-TiC) is found to be higher than that of Pd loaded carbon (Pd-C) suggesting the active role of TiC. The catalytic activities of TiC-based supports are further improved by tuning their morphologies. Figure 6 (c) reveals that the activities are higher in case of Pd-TiC-NW than that of Pd-TiC. Figure 6. (a) Cyclic voltammograms of Pd-TiC and Pd-C for ethanol oxidation, (b) T EM image of Pd-TiC-NW and (c) voltammograms of Pd-TiC-NW in N2-saturated 1 M ethanol in 1 M KOH medium, scan rate used is 0.05 Vs-1. The next aspect explored, is based on the preparation of C-TiO2 and its use as a substrate for surface enhanced Raman spectroscopy (SERS). Carbon doped titanium dioxide is prepared by thermal annealing of TiC. It is observed that the amount of dopant (carbon content) is dependent on the experimental conditions used. SERS studies using 4¬mercaptobenzoic acid (4-MBA) as the analyte, indicates that C-TiO2 [figure 7 (a)] enhances Raman signals based on chemical interactions between the analyte and the substrate. Raman signal intensities can be tuned with the amount of carbon content in C¬TiO2. Enhancement factors are calculated to be (7.7 ± 1.2) x 103 (for 4-MBA) and (1.7 ± 1.2) x 103 (for 4-nitrothiophenol). The SERS substrates are found to be surface renewable using visible light, a simple strategy to re-use the substrate [figure 7 (b)]. The regeneration of SERS substrates is based on self cleaning action of TiO2 that produces highly reactive oxygen containing radicals known to degrade the molecules adsorbed on TiO2. Thus, the versatility of TiC has been demonstrated with various studies. In addition to using TiC-based materials, nanoparticles of Rh, Ir and Rh-Ir alloy structures have also been used for borohydride oxidation reaction. This is explained in the last section. In Appendix-I, preliminary studies on the preparation of TiC-polyaniline (PANI) composites using liquid-liquid interfacial polymerization is explained. Raman spectroscopy results suggest that the presence of TiC-NW makes PANI to assume preferential orientation in the polaronic (conducting) form. Appendix-II discusses the role of TiC-NW as a fluorescence quencher for CdS semiconductor nanoparticles.

L'objectif de cette thèse est d'étudier des variations de composition de verres ou l'intégration de nanostructures métalliques pouvant présenter un intérêt pour les capteurs à fibres optiques répartis (CFO). Ces capteurs utilisent le coeur des fibres optiques constitué majoritairement de silice (SiO2) pour sonder la température ou les déformations sur des parcours plurikilométriques de fibres. A cette fin, les rétrodiffusions Raman et Brillouin dans les fibres optiques sont utilisées, la diffusion Raman étant sensible aux variations de température et la diffusion Brillouin aux variations de température et de déformation. L'intensité de diffusion Raman peut-être exaltée au contact de nanostructures de métaux nobles, par l'intermédiaire de l'effet SERS (Diffusion Raman Exaltée de Surface) faisant intervenir notamment la résonance plasmon de surface (SPR), oscillation collective des électrons libres à la surface métallique générant une large amplification du champ électrique local. L'intégration de nanostructures métalliques dans les fibres optiques pourrait permettre d'augmenter l'intensité de rétrodiffusion Raman et améliorer les performances des CFO (sensibilité, temps d'intégration…). Une étude sur des échantillons modèles, constitués de substrats SERS nanostructurés d'or et recouvert de silice par dépôt sol-gel, est présentée dans ce manuscrit. Les résultats SERS ainsi obtenus permettent de caractériser le phénomène physique du SERS de SiO2 et de prédire sa potentielle utilité dans les CFO Raman / The purpose of this thesis is to study composition variations of silicate glasses or the integration of metallic nanostructures that may be relevant for distributed fiber optic sensors (FOS). These sensors use optical fiber cores mainly composed of silica (SiO2) to probe temperature or strain on multi-kilometer route fibers. To measure these effects, Raman and Brillouin backscattering in optical fibers are used, Raman scattering being sensitive to temperature variations and Brillouin scattering to temperature and strain variations. Raman scattering intensity may be enhanced in conjunction with noble metal nanostructures via the SERS effect (Surface Enhanced Raman Scattering) which involves surface plasmon resonance (SPR), a collective oscillation of free electrons at the metal surface generating a large amplification of the local electric field. The integration of metallic nanostructures in optical fibers could increase Raman backscattering intensity and improve FOS performance (sensitivity, integration time…). A study on model samples has been performed with SERS substrates consisting of gold nanostructures and coated with a sol-gel oxide deposition (TiO2, SiO2). The obtained SERS results are used to predict the contribution of metallic nanostructures in Raman distributed temperature FOS