As propriedades fotofísicas dos complexos morin-Mg2+ e morin-Ce3+, foram investigadas em solução metanólica, em filmes finos de polímeros e em nanozéolitas por técnicas de fluorescência. A associação do metal ao flavonoide ocorre no sítio da carbonila do anel pirona nas razões estequiométricas de 1:1 e 1:2 (magnésio: morin), e esta associação favorece no aumento considerável da intensidade de fluorescência devido à inibição da transferência intramolecular do próton no estado excitado. Os resultados revelaram que os espectros de emissão do complexo morin-Mg2+ sofreram um pequeno deslocamento hipsocrômico. Os decaimentos de fluorescência do sistema Morin-Mg2+ são triexponenciais para o complexos Morin-Mg2+ formados com tempo de vida máximo de 3 ns. O complexo morin-Ce3+ é pouco fluorescente e a complexação com o metal leva a supressão de fluorescência devido a sua natureza paramagnética. A estequiometria aparente dominante é de um 1:1 e o decaimento possui um componente de tempo de vida longo de 4-5 ns. Na comparação das propriedades de fluorescência do morin-Mg2+ com o indicador magnesium green verificamos que ambos são bons indicadores fluorescentes para a microscopia de fluorescência podendo esses complexos serem usados na detecção de Mg2+ em nanozeólita e outros sistemas / The photophysical properties of the molecular complexes of morin with Mg2+ and Ce3+ cations in methanol solution as well as in thin polymeric films and nanozeolytes have been investigated by using fluorescence spectroscopy and microscopy. The association of morin with Mg2+ occurs at the (4)-carbonyl group of the pyrone ring at 1:1 and 1:2 stoichiometric ratio. The complexes have shown an increase of the emission quantum yield by precluding the excited state deactivation though the intramolecular proton transfer process. The fluorescence decays of the complexes are non exponential due to the presence of more than one emission species and the average decay time found was about 3 ns. On the other hand, the addition of Ce3+ to morin solution resulted in fluorescence quenching ascribed to 1:1 non emissive complex due to the paramagnetic nature of the metal cation. The fluorescence properties of morin-Mg2+ complex have been compared with the standard fluorescence indicator magnesium green. The results pointed out that morin-Mg2+ may be used as an alternative low coast indicator of Mg2+ in homogenous as well as in microheterogeneous media.

The dissertation is a philosophical approach to politicizing place and space, or environments broadly construed, that is motivated by three questions. How can geography be employed to analyze the spatialities of environmental justice? How do spatial concepts inform understandings of environmentalism? And, how can geography help overcome social/political philosophy's redistribution-recognition debate in a way that accounts for the multiscalar dimensions of environmental justice? Accordingly, the dissertation's objective is threefold. First, I develop a critical geography framework that explores the spatialities of environmental injustices as they pertain to economic marginalization across spaces of inequitable distribution, cultural subordination in places of misrecognition, and political exclusion from public places of deliberation and policy. Place and space are relationally constituted by intricate networks of social relations, cultural practices, socioecological flows, and political-economic processes, and I contend that urban and natural environments are best represented as "places-in-space." Second, I argue that spatial frameworks and environmental discourses interlock because conceptualizations of place and space affect how environments are perceived, serve as framing devices to identify environmental issues, and entail different solutions to problems. In the midst of demonstrating how the racialization of place upholds inequitable distributions of pollution burdens, I introduce notions of "social location" and "white privilege" to account for the conflicting agendas of the mainstream environmental movement and the environmental justice movement, and consequent accusations of discriminatory environmentalism. Third, I outline a bivalent environmental justice theory that deals with the spatialities of environmental injustices. The theory synergizes distributive justice and the politics of social equality with recognition justice and the politics of identity and difference, therefore connecting cultural issues to a broader materialist analysis concerned with economic issues that extend across space. In doing so, I provide a justice framework that assesses critically the particularities of place and concurrently identifies commonalities to diverse social struggles, thus spatializing the geography of place-based political praxis.

This master`s thesis deals with low-temperature heating that employs a heat pump. The introduction gives reasons for utilization of the renewable heat sources for heating. The next part focuses on a practical application of renewables on the heating of a family house. It covers a detailed description of the building and the designed heating system which includes: the calculation of thermal losses, design of the low-temperature boiler, heat pump, safety devices, heating elements, sizing and control of the system. The last part is devoted to the assessment of the system performance.

Στην εργασία αυτή προχωρήσαμε στη μελέτη της αλληλεπίδρασης των ιόντων δισθενούς χαλκού, Cu2+ με στατιστικά συμπολυμερή P(ANa-co-SSNa) του ακρυλικού οξέος, (ANa) με το στυρενοσουλφονικό οξύ (SSNa). Συντέθηκαν τα συμπολυμερή P(ANa50-co-SSNa) και P(AΝa80-co-SSNa) που περιέχουν 50 mol% και 80 mol% ακρυλικού οξέος αντίστοιχα. Τα συμπολυμερή αυτά χαρακτηρίστηκαν με φασματοσκοπία πυρηνικού μαγνητικού συντονισμού 1H NMR. Προχωρήσαμε στην φυσικοχημική μελέτη της αλληλεπίδρασης ιόντων δισθενούς χαλκού, Cu2+, με τα συμπολυμερή P(ANa50-co-SSNa) και P(AΝa80-co-SSNa) χρησιμοποιώντας διάφορες τεχνικές όπως η θολομετρία, η ιξωδομετρία και η φασματοσκοπία UV-vis. Τα πειράματα πραγματοποιήθηκαν σε υδατικά διαλύματα, στα οποία χρησιμοποιήθηκε ως διαλύτης τρισαπιονισμένο νερό, H2O-3D. Για λόγους σύγκρισης μελετήθηκαν επίσης τα αντίστοιχα ομοπολυμερή των μονομερών που αποτελούν τα συμπολυμερή P(ANa-co-SSNa). Έτσι, πραγματοποιήθηκε φυσικοχημική μελέτη της αλληλεπίδρασης των ιόντων Cu2+ με το πολυ(ακρυλικό νάτριο), PANa, και το πολυ(στυρενοσουλφονικό νάτριο), PSSNa, αντίστοιχα. Από την ιξωδομετρική μελέτη προέκυψε πως η εισαγωγή ιόντων χαλκού Cu2+ σε υδατικό διάλυμα πολυμερούς οδηγεί στην μείωση του ανηγμένου ιξώδους. Μάλιστα η μείωση αυτή είναι πιο δραστική καθώς αυξανεται η συγκέντρωση ιόντων Cu2+ στο διάλυμα. Αυτή η συμπεριφορά αποτελεί ένδειξη της συμπλοκοποίησης των ιόντων χαλκού, Cu2+, με τις ομάδες καρβοξυλίων του ακρυλικού οξέος (ΑΑ). Διαπιστώθηκε πως στα συμπολυμερή P(ANa-co-SSNa) τα Cu2+ συμπλοκοποιούνται με τα καρβοξύλια του ακρυλικού οξέος σε αναλογία ιόντων χαλκού προς ομάδες καρβοξυλίων ίση με 1:2. Όσον αφορά στην μελέτη με UV-vis, ενώ στην περίπτωση του ομοπολυμερούς PSSNa δεν υπάρχει κάποια ιδιαίτερη αλληλεπίδραση τύπου συμπλόκου ένταξης μεταξύ του πολυμερούς και των ιόντων του Cu2+, στην περίπτωση του συμπολυμερούς Ρ(ΑNa50-co-SSNa), παρατηρήθηκε μετατόπιση του σήματος των ιόντων Cu2+ (από τα 800 στα 745 nm) παρουσία του συμπολυμερούς. Αυτό είναι χαρακτηριστικό του σχηματισμού συμπλόκου ένταξης μεταξύ των ιόντων του Cu2+ και των ομάδων COO- του συμπολυμερούς. / In the present work we studied the interaction of bivalent copper ions Cu2+ with random copolymers P(ANa-co-SSNa) of acrylic acid (ANa) and styrenesulfonic acid (SSNa). Two copolymers, P(ANa50-co-SSNa) and P(AΝa80-co-SSNa) with 50 mol% and 80 mol% in acrylic acid, respectively, were synthesized and characterized by neutron magnetic resonance spectroscopy, 1H NMR. We proceeded in the physicochemical study of the interaction of bivalent copper ions, Cu2+, with P(ANa50-co-SSNa) and P(AΝa80-co-SSNa) copolymers using techniques like turbidimetry, viscometry and UV-vis spectroscopy. The experiments were performed in aqueous media using 3D water, H2O-3D. For reasons of comparison the respective homopolymers of sodium polyacrylate, PANa, and poly(styrene sulfonate), PSSNa, were also studied. From viscometry it was found that the introduction of copper ions in the polymer aqueous solutions leads to the decrease of the reduced viscosity. Moreover, this decrease is more pronounced as the concentration of Cu2+ increases in the solution. This behavior is indicative of the complexation between Cu2+ with the carboxylate groups of acrylic acid (ΑΑ). In the P(ANa-co-SSNa)/Cu2+ system, it was found that complexation occurs when the ratio of copper ions to carboxylates is equal to 1:2. UV-vis spectroscopy showed that, while in the case of PSSNa homopolymer there is not strong interaction with Cu2+, in the case of the Ρ(ΑNa50-co-SSNa) copolymer, the introduction of the polymer lead to a shift of the maximum absorbance of Cu2+ (from 800 to 745 nm). This was due to the complexation of Cu2+ with the COO- groups of the copolymer.

Protein-protein interactions (PPIs) are attractive targets because of their therapeutic potential. One approach to design small molecules that can disrupt the PPIs is to use structural information of proteins. With this approach, triazole-based peptidomimetics that mimic beta-turn hot-spot regions in neurotrophins were synthesized. The monovalent mimics were assembled into bivalent mimics via a combinatorial method. Three different bivalent mimics were prepared for different studies. Bivalent mimics with long-linkers bound to TrkA or TrkC receptor and showed partial antagonism for the receptors. Other mimics were conjugated with cytotoxic compounds and they were used for TrkC targeted drug delivery. The last group of bivalent mimics previously showed targeted delivery effects for pancreatic cancer cells. In this study, we synthesized Eu-chelated bivalent mimics to perform a competitive binding assay for pancreatic cancer cells. Previous research in our group focused on design of secondary structures' mimics on rigid scaffolds as "minimalist mimics." We sought to establish structural design criteria for the minimalist mimics, and we wanted to propose that sets of such compounds could mimic local pairs of amino acids in any secondary structures as "universal peptidomimetics." Thus, we designed five compounds, such as oxazoline-, pyrrole-, dyine- "kinked" and "linear" bistrizole-based peptidomimetics, and performed molecular modelings, DFT calculations, and QMD for them to validate our hypothesis. On the concepts of "minimalist mimics" and "universal peptidomimetics," we developed the C alpha ? C beta vector matching program to evaluate preferred orientations of C alpha - C beta coordinates for secondary structures. We applied the program to omegatides and pyrrolinone-pyrrolidine oligomers. The compounds matched better with strands than for helices. We expanded the C alpha ? C beta vector matching idea to a method that ranks preferred conformations of small molecules on any combination of three interface side-chains in all structurally characterized PPIs. We developed a PDB mining program (explores key orientation, EKO) to do this, and EKO applied to pyrrolinone-pyrrolidine oligomers to find targets. EKO found several interesting targets, such as AICAR Tfase, GAPDH, and HIV-1 protease. HIV-1 dimerization inhibition and Zhang-Poorman kinetic assays were performed to validate our hypothesis, and the results showed that pyrrolinone-pyrrolidine derivatives inhibited HIV-1 dimerization.

La multichimiorésistance est caractérisée par une résistance simultanée à des agents chimiothérapeutiques de structures diverses, induite notamment par l'efflux des substances actives hors des cellules. Les transporteurs ABC (ATP-Binding Cassette) sont des protéines transmembranaires impliquées dans cet efflux et qui participent à l'échec du traitement de certains cancers. Par ailleurs, ce mécanisme d'efflux a également été évoqué dans le cadre de la résistance de certains microorganismes aux antimicrobiens. Dans cette étude, nous avons conçu et synthétisé des dérivés susceptibles d'inhiber certains transporteurs ABC, en particulier, la glycoprotéine-P (Pgp) impliquée dans la multichimiorésistance des tumeurs humaines, et CpABC3, rencontré chez le parasite Cryptosporidium parvum. Dans un premier temps, nous avons synthétisé trois dérivés de type 4-alkyl-imidazo[4,5-b]pyridin-7-one, hétérocycles destinés à se fixer sur le site à ATP des transporteurs ABC. L'activité de ces composés a été évaluée vis-à-vis d'un fragment recombinant (H6-NBD1) de CpABC3, et un de ceux-ci a montré une liaison (faible) à ce fragment. Nous avons ensuite préparé dix-sept dérivés bivalents susceptibles d'inhiber la Pgp, constitués d'une molécule d'adénine (ciblant le site à ATP) reliée à la progestérone (ciblant le site aux stéroïdes) par un bras de géométrie variable. Ces dérivés ont été testés sur des lignées cellulaires K562/R7 surexprimant la Pgp, et un de ceux-ci a montré une activité supérieure à celle de la progestérone. Enfin, nous avons mis au point une synthèse de chaînes de type oligocyclohexylidène, qui sont de bons candidats pour constituer des bras espaceurs rigides

La glycoprotéine P ou Pgp est une protéine de transport transmembranaire qui a pour rôle principal d'évacuer hors des cellules les xénobiotiques et les toxines. Elle agit comme une pompe à efflux et est surexprimée par certaines cellules cancéreuses. Ainsi, via ce mécanisme, les cellules tumorales peuvent devenir résistantes aux antitumoraux et conduire à l'échec des traitements lors de la chimiothérapie anticancéreuse. Aussi, la modulation de l'activité de cette protéine peut être un des moyens permettant l'amélioration des traitements anticancéreux. La Pgp possède plusieurs sites de fixation de substrats dont deux sont relativement proches spatialement : un site à stéroïdes et un site à ATP permettant d'hydrolyser l'ATP, source d'énergie nécessaire au fonctionnement de la Pgp. Notre objectif a été de synthétiser des modulateurs bivalents stéroïdes/bras/nucléosides. Pour cela, nous avons dans un premier temps préparé des analogues de bases puriques et plus particulièrement des didéazapurines, les 5- et 6-azaindoles et les trioxopyrrolopyridines correspondant puis effectué la glycosylation de ces derniers. Dans un second temps, des modulateurs stéroïdiens ont été synthétisés : plusieurs ont montré une bonne activité modulatrice de la Pgp. Enfin, des bras polyéthylènes glycols de longueurs variables ont été reliés à l'adénine pour être ensuite fixés aux stéroïdes via une fonction amide / P-glycoprotein Pgp is a transmembrane transporter protein that protects cells from potentially toxic exogenous compounds. This protein acts as a molecular pump and is overexpressed in cancer cells. So via that mechanism, tumor cells exhibit intrinsic or acquired cross-resistance to diverse chemotherapeutic agents, resulting in the failure of chemotherapy for some cancers. The modulation of the efflux activity of that protein can be one of the mean that could increase anticancer treatments efficiency. Pgp has different substrates sites, two of which are spatially close : the steroid site and the ATP site, the latter is in charge of ATP hydrolysis which give the required energy for the Pgp efflux activity. Our goal was to synthesize bivalent modulators steroids/linker/nucleosides. First we have obtained purine bases analogues and particularly didéazapurines such as 5- and 6-azaindoles and the corresponding trioxopyrrolopyridines, then we have carried out the glycosylation of those compounds. Then, steroids modulators have been synthesized : some of them have shown a good modulation activity toward Pgp. Finally, polyethylene glycols chains with different length have been grafted on adenine so that they could be attached to the steroids via an amide function

The diploma thesis deals with overall reduction of energy use in the family house by reducing heat loss and selecting heat and cold source. In the first part are described different types of heat loss along with ways to efectively reduce each loss. Contact insulation systems are further more described, because of beeing used more often. Newer materials are also presented to readers, although their use is less common. The next chapters describe the parameters of choosed heat and cold sources. The calculating part describes process of annual power usage calculation. Further there are three designs of thermal insulation proposed and for each one the appropriate heat and cold source is selected, using heat pump with bivalent operation for all designs. Finally these options are compared in an economic and technical way and the most advantageous of them is determined.

Diploma thesis deals with change of heating source for a block of flats with aim to reduce heating costs. Thesis contains calculations of energy requirements of house, including requirements for heating and domestic hot water preparation. Several ways of heating by a heat pump were designed based on the calculated values. Each variant of the designed heating system is compared with current operational costs. Possible cost economies and maximum value of investment costs of the heating system were assessed

This thesis reports on the synthesis and characterisation of various types of oxidised multiwalled carbon nanotubes (O-MWCNTs) modified polymeric membranes. These OMWCNT modified polymeric membranes were then assessed in terms of their remediation potential, in particular for the removal of estrogenic hormones, dissolved proteins and salts from brackish water sources. The fabricated O-MWCNT-based polyethersulfone (PES) membranes were applied as (i) adsorptive membranes, (ii) molecular-sieving membranes and (iii) as membrane substrates for thin-film composite nanofiltration (NF) membrane preparation. The research work commences with the preparation of MWCNTs via a facile catalytic chemical vapour deposition method and their chemical oxidation with strong acids in order to introduce hydrophilic carboxylic (–COOH) and hydroxyl (–OH) surface functional group moieties on the MWCNT outer walls. Intrinsically, MWCNTs are chemically inert and tend to form agglomerated nanoclusters (due to van der Waals interaction forces), which induce further difficulties in their homogenous dispersion in polar solvents (such as N-methyl-2- pyrrolidone and dimethylacetamide) employed to dissolve the polymers in the study. The introduction of these oxygen-containing moieties was therefore necessary to aid the dispersion of MWCNTs in organic solvents and for their enhanced interaction with PES and sulfonated polysulfone (SPSf). The PES/O-MWCNT ultrafiltration (UF) membranes were produced via a non-solvent induced phase separation (NIPS) method and employed in the adsorptive removal of natural hormone estrone (E1). The PES/O-MWCNT UF membranes thus prepared were characterised using SEM, AFM, zeta potential measurements and MWCO experiments. It was found that the adsorption of E1 initially increased with an increase in O-MWCNT content followed by a constant decline on further increments. Moreover, the inclusion of OMWCNTs (0.5 wt.%) in the PES membrane matrix resulted in an increase in the maximum adsorption capacity for E1 compared to pristine PES membrane, i.e., 31.25 mg/g adsorption capacity was achieved for PES/O-MWCNT compared to 23.81 mg/g for bare PES UF membrane. Based on the correlation coefficients, the Freundlich isotherm provided a better fit for the adsorption data and the adsorption kinetics followed the pseudo-second order kinetic model. Interestingly, after five regeneration cycles, the PES/O-MWCNT membranes were found to maintain similar adsorption efficiencies. The PES/O-MWCNT membranes thus prepared, present a viable approach for the removal of natural hormones and other endocrine disruptors present in water systems compared to the use of common adsorbents such as activated carbon, which end up generating large amounts of chemical sludge that require disposal in the environment. The third part of the study focused on the controlled formation of macrovoid-free polyethersulfone/sulfonated polysulfone (PES/SPSf) UF membranes with high water permeabilities, mechanical strength and antifouling properties, in the presence of O-MWCNTs. To date, the majority of polymeric nanocomposite membranes modified with O-MWCNTs as nanofillers, generally have finger-like structures and macrovoids in the membrane sublayer. While the presence of finger-like structures is favoured for the reduction in mass flow resistance, their presence induces mechanically weak points in the membrane and reduces the nanocomposite membranes’ mechanical strength properties and long-term performance stability. As such macrovoid-free PES/SPSf/O-MWCNT membranes were fabricated via the NIPS techniques, using H2O and polyethylene glycol (PEG 20 kDa) as non-solvent additives. The SEM cross-sectional images showed that a fully sponge-like morphology of the PES/SPSf membrane can be achieved in the presence of different loadings of O-MWCNTs. This was attributable to the formation of stronger hydrogen bonds between the SPSf polymer and non-solvent additives i.e., H2O, PEG 20kDa and OMWCNTs. The combination of the macrovoid-free morphology and homogenous distribution of high mechanical strength O-MWCNTs in the membrane matrix provided excellent mechanical strength enhancements for PES/SPSf/O-MWCNT membranes. Additionally, pure water flux initially increased from 598 L/m2 .h to 713 L/m2 .h followed by a decline to 578 L/m2 .h upon further increments in O-MWCNT contents, due to agglomeration of O-MWCNTs at higher loadings. The fabricated PES/SPSf/O-MWCNT membranes also displayed superior antifouling properties (FRR > 90%) and antibacterial properties (99% bacterial killing ratio) against E. coli bacteria. The fabricated support fabricfree PES/SPSf/O-MWCNT UF membranes with macrovoid-free sublayer morphologies displayed attractive features for use as UF membranes in the pre-treatment stages of water treatment and as support substrates for the preparation of TFC membranes. In general, sponge-like and macrovoid-free membrane structures are regarded as unfit for use as support membranes for TFC membrane preparation since they increase the membrane’s resistance to water flow, thereby reducing the overall TFC membrane permeability. This assumption has largely been based on sponge-like and macrovoid-free membranes structures achieved through the use of extremely high polymer concentrations, particularly using polysulfone (PSf) polymer. Hence, the sponge-like structures formed are very dense and less porous. Nevertheless, the macrovoid-free PES/SPSf/O-MWCNT membranes produced in this study, consisted of open cellular network microstructures within the membrane sublayer, which could be visualised at higher SEM magnifications. This part of the work therefore investigated the role of hydrophilic, macrovoid-free PES/SPSf and PES/SPSf/O-MWCNT as support membranes on the performance of TFC NF membranes. The TFC NF membranes were prepared via an efficient interfacial polymerization reaction between piperazine (PIP) and trimesoyl chloride (TMC). The deposition of the polyamide thin-film layer was confirmed by ATR-FTIR, SEM, AFM, contact angle and zeta potential measurements. Membrane performance results showed that TFC NF membranes fabricated on PES/SPSf/O-MWCNT support membranes displayed a 35% improvement in pure water flux with comparable salt rejections from those prepared on bare PES/SPSf support membranes. Salt rejection followed the order of Na2SO4 > MgSO4 > NaCl, which is typical for negatively charged NF membranes. It was established that the presence of hydrophilic O-MWCNTs in the support membrane allowed for the formation of a thin polyamide layer on the top surface of the support membrane, which gave rise to enhanced water permeability of the TFC NF membrane and the possibility of polyamide rejection layer within the support membrane pore channels. To further improve the performance of the TFC NF membranes, in particular, the monovalent/bivalent salt selectivity, a mixture of PIP and 2,4-diaminobenzene sulfonic acid (2,4-DABSA) at different weight ratios was prepared in the aqueous solution and reacted with TMC in the organic phase solution. It was found that the addition of low monomer weight ratio of 2,4-DABSA in the amine mixture, lead to the generation of a sulfonated TFC NF membrane with superior membrane performance in terms of pure water permeability (30.2 L/m2 .h), monovalent/bivalent salt selectivity (𝛼NaCl/Na2SO4 = 25.0) at low operating pressures (3 bar) and salt concentrations in the range of brackish waters. This was attributable to the combined presence of sulfonic acid groups on the membrane surface and the formation of the thin polyamide layer. Moreover, sulfonated TFC NF membranes exhibited good antifouling properties against bovine serum albumin (BSA), with FRR of 96.4% after three cycles of fouling and cleaning, with a fairly stable membrane performance over a 10-day period of pure water flux and Na2SO4 rejection testing. Indeed, the use of a macrovoid-free PES/SPSf/O-MWCNT support membrane did not only provide the mechanical strength for the deposition of TFC NF membrane, but also their open, cellular network microstructure, combined with high hydrophilicity and large surface pore sizes were beneficial in the reduction of polyamide layer thickness, and subsequently in the enhancement of TFC NF membrane performance. The study provided insightful information on lesser known aspects of O-MWCNT incorporated polymeric membranes, with regards to membrane structural configurations in relation to the membrane structure-performance relationships. It has been deduced that (i) the right combination of membrane surface characteristics and adsorbate solution chemistry is necessary for an open UF membrane to display reasonable removal efficiencies for low molecular-weight solutes, (ii) the combination of macrovoid-free membrane morphology with good dispersion of O-MWCNTs in the polymer matrix is necessary to realise significant enhancements in the mechanical properties of sulfonated membrane and (iii) formation of a thin sulfonated polyamide layer on top of the hydrophilic PES/SPSf/O-MWCNT support membrane is necessary to achieve high salt selectivity, and allow for the sulfonated TFC NF membrane to be operated at low pressures. / College of Engineering, Science and Technology