Dans certains contextes, les méthodes classiques utilisées pour le calcul de champs rayonnés ou diffractés en présence d'obstacles de grande taille par rapport à la longueur d'onde, comme l'Optique Physique ou les méthodes de rayons, ne sont pas valides ou deviennent très lourdes en temps de calcul. La théorie des frames de Gabor fournit un cadre rigoureux permettant de décomposer une distribution de sources électromagnétiques, définie dans une ouverture équivalente plane, en une somme plus ou moins redondante de fenêtres gaussiennes. Cette décomposition peut servir de base à des algorithme de lancer de faisceaux gaussiens.Jusqu'à présent cette théorie était limitée à des décompositions dans un plan (rayonnement dans un demi-espace). L'objet de cette thèse est d'utiliser cette théorie pour décomposer des champs rayonnés ou diffractés dans toutes les directions de l'espace. Ce travail de thèse commence par une étude approfondie de l'influence des paramètres utilisés pour le calcul des coefficients de frame. La mise en oeuvre numérique permet de tester l'efficacité de techniques de troncation et de compression en termes de compromis précision/temps de calcul. Le coeur de la thèse consiste en une méthode originale de partitionnement spectral, utilisant des fonctions de partition de l'unité, qui permet d'utiliser le lancer de faisceaux gaussiens à partir de frames définis dans six plans, pour un rayonnement dans tout l'espace tridimensionnel. La formulation de la méthode est présentée. Elle est appliquée à la décomposition en faisceaux gaussiens du champ rayonné par des antennes théoriques omnidirectionnelles (réseau de dipôles et dipôle demi-onde). Une antenne réaliste sert enfin de cas test pour la mise en œuvre de la décomposition à partir de données expérimentales discrètes / In some contexts, conventional methods used for large problems involving radiated or diffracted field computations in the presence of obstacles, such as Physical Optics and ray based methods, become really inaccurate or prohibitively time-consuming. Gabor frame theory provides a rigorous framework for the initial decomposition of equivalent source distributions into a redundant set of Gaussian windows. Frame decomposition has been introduced as a first discretization step into Gaussian Beam Shooting (GBS) algorithms. Until now, frame decomposition has essentially been restricted to planar source distributions, radiating into one half space. The main goal of this thesis is to extend the application range of this theory to radiated or diffracted field decomposition into Gaussian beams propagating into the whole space. The thesis begins with a thorough study of influence of the parameters used for frame coefficient calculation. Numerical implementation is used to test the efficiency of truncation and compression techniques in terms of accuracy / computation time balance optimization. The core of the thesis consists of an original spectral domain partitioning method involving partition of unity functions, which allows to use Gaussian beam shooting from frames defined in six planes, for radiation into the whole three-dimensional space. The formulation of the method is presented and applied to the decomposition of fields radiated by theoretical omnidirectional antennas (dipole array and half-wave dipole) into Gaussian beams. A realistic antenna is used as a test case for the implementation of decompositions based on experimental discrete initial data

Le travail présenté dans cette thèse a pour objectif l’étude des conditions nécessaires pour évaluer l'exposition radio fréquence (RF) due aux téléphones mobiles dans un scenario d’utilisation réelle et le développement d’une méthodologie permettant de prédire et de comparer les téléphones mobiles en fonction de leurs expositions RF réelles. Les téléphones mobiles sont caractérisés par leur débit d'absorption spécifique (DAS) et leur performance en émission et en réception (over-the-air, OTA). En utilisant le DAS et la puissance totale rayonnée (PTR), un indice d'exposition appelée l'indice SAROTA a été proposé précédemment afin de prévoir l'exposition réelle des téléphones mobiles. L’indice SAROTA sert ainsi de métrique permettant de comparer les téléphones mobiles. Afin de déterminer expérimentalement l’exposition réelle aux RF, plusieurs téléphones avec des modifications logicielles permettant d’enregistrer les paramètres du réseau, sont utilisés pour l’étude qui est menée comme suit : (a) caractérisation des outils et des ressources disponibles pour effectuer des mesures ciblées, (b) identification des ressources radio et des paramètres importants pour effectuer ces mesures, (c) étude de la mise en œuvre effective du mécanisme de contrôle de puissance observé dans un réseau mobile réel pour différents niveaux et de qualités du signal reçus, (d) étude de la corrélation entre la performance OTA des téléphones mobiles et l’étendue effective du contrôle de puissance appliquée par le réseau, (e) comparaison entre la valeur réelle de l’exposition et la valeur prédite en utilisant l’indice SAROTA. Comme les défis logistiques et techniques sont plus difficiles à surmonter pour les mesures dans un environnement multi-trajets extérieur, les expériences ont été limitées à des environnements intérieurs pour assurer une meilleure répétabilité des mesures. Lors d’une première phase de l’étude, la stabilité de l’environnement intérieur a été évaluée. Lors d’une deuxième phase, l’influence de la main sur le DAS et la PTR des téléphones mobiles ainsi que sur l’évaluation de l’exposition réelle prédite par l’indice SAROTA a été étudiée. Lors d’une troisième phase, un ensemble de téléphones mobiles identiques ont été modifiés et des mesures effectuées pour vérifier que l’indice SAROTA permet bien de prédire l’exposition réelle des personnes. / The work presented in the thesis is directed towards addressing the requirement for determining the radio frequency (RF) exposure due to mobile phones under typical usage/ real-life scenarios and also to develop a method to predict and compare mobile phones for their real-life RF exposure. The mobile phones are characterized for their specific absorption rate (SAR) and for transmit and receive performance given by the over-the-air (OTA) characterization. Using the SAR and the total radiated power (TRP) characterization, an exposure index referred to as the SAROTA index was previously proposed to predict the real-life exposure due to mobile phones which would also serve as a metric to compare individual phones. In order to experimentally determine the real-life RF exposure, various software modified phones (SMP) are utilized for the study. These phones contain an embedded software capable of recording the network parameters. The study is undertaken in the following order: (a) Characterization of the available tools and resources for performing targeted measurements/experiments, (b) identifying the important radio resource parameters and metrics to perform the targeted measurements, (c) investigation of the actual implementation of the power control mechanism in a live network for various received signal level and received quality environments, (d) investigating the correlation of the over-the-air performance of the mobile phones and the extent of actual power control realization, (e) comparing the actual exposure and the real-life exposure as predicted by the SAROTA index. Based on the logistical and technical challenges encountered, the experiments were restricted to indoor environments to enable repeatability. During the first phase of the study, the stability of the indoor environment was evaluated. During the second phase, the influence of hand phantom on the SAR and TRP of the mobile phones and the capability of the SAROTA index to predict the exposure was investigated. Further developing on the insights from the hand phantom experiments, in the third phase, a set of identical software modified phones were externally modified to alter the TRP performance and the methodology to determine the real-life exposure and also verify the capability of the SAROTA index to predict the exposure levels was investigated. The experiments demonstrate that the SAROTA index is capable of predicting the real-life exposure and comparing the mobile phones.

A procedure for computational dosimetry to verify safety standards compliance of mobile communications base stations is presented. Compared with the traditional power density method, a procedure based on more rigorous physics was devised, requiring computation or measurement of the specific absorption rate (SAR) within the biological tissue of a person at an arbitrary distance. This uses a hybrid methd of moments/finite difference time domain (MoM/FDTD) numerical method in order to determine the field or SAR distribution in complex penetrable media, without the computational penalties that would result from a wholly FDTD simulation. It is shown that the transmitted power allowed by the more precise SAR method is, in many cases, between two and five times greater than that allowed by standards implementing the power flux density method.

In a short time touchscreens has become one of the most used methods for input to smartphones and other machines such as cash registers, card terminals and ATMs. While the technology change was quick it introduces the possibility of new security holes. Compromising emanations is a possible security hole in almost all electronic equipment. These emanations can be used in a side-channel attack if they leak information that compromise the security of the device. This thesis studies a single-board computer (SBC) with a touchscreen and a smartphone in order to evaluate if any usable information leaks regarding what is done on the touchscreen i.e. where on the screen a user touches. It is shown that the location of a touch can be read out from information leaking through the power cable and wirelessly from the single-board computer. It is also shown that basic information can be read out wirelessly from the smartphone but further testing is required to evaluate the possibility to extract usable information from the device.

Este trabalho tem por objetivo apresentar uma análise de desempenho e viabilidade da aplicação da antena de van Veen e Bergervoet na determinação de contribuições de fontes de emissão radiada em ambientes eletromagnéticos, considerando-se a faixa de freqüência de 9 kHz a 30 MHz. Como potencial aplicação resultante deste trabalho está a utilização de resultados experimentais na determinação de fontes equivalentes de emissão radiada, aplicáveis em simulações numéricas e diretamente através de cálculo analítico na determinação de campos eletromagnéticos no espaço. Desta forma, o uso dessas fontes em simuladores de ambientes eletromagnéticos poderá contribuir para diminuir as restrições e dificuldades atuais oriundas da avaliação experimental e teórica de ambientes eletromagnéticos diversos, e daquelas relativas a estudos de compatibilidade eletromagnética de sistemas elétricos e eletrônicos, como sistemas embarcados, etc. / The objective of this work is to present is to present the main theoretical aspects and the evaluation of the van Veen and Bergervoet antenna performance, concerning its application to the determination of equivalent radiated emission sources, for the 9 kHz to 30 MHz frequency range. As a potential application, it is assumed the use of the equivalent sources, obtained based on experimental measurements, directly, on simulations of the resulting electromagnetic environments. The application of this methodology, although considered as a simplified one, may contribute to reduce the current experimental and theoretical restrictions and difficulties regarding the electromagnetic compatibility studies of electrical and electronics systems, like the on-board systems etc.

Este trabalho tem por objetivo apresentar uma análise de desempenho e viabilidade da aplicação da antena de van Veen e Bergervoet na determinação de contribuições de fontes de emissão radiada em ambientes eletromagnéticos, considerando-se a faixa de freqüência de 9 kHz a 30 MHz. Como potencial aplicação resultante deste trabalho está a utilização de resultados experimentais na determinação de fontes equivalentes de emissão radiada, aplicáveis em simulações numéricas e diretamente através de cálculo analítico na determinação de campos eletromagnéticos no espaço. Desta forma, o uso dessas fontes em simuladores de ambientes eletromagnéticos poderá contribuir para diminuir as restrições e dificuldades atuais oriundas da avaliação experimental e teórica de ambientes eletromagnéticos diversos, e daquelas relativas a estudos de compatibilidade eletromagnética de sistemas elétricos e eletrônicos, como sistemas embarcados, etc. / The objective of this work is to present is to present the main theoretical aspects and the evaluation of the van Veen and Bergervoet antenna performance, concerning its application to the determination of equivalent radiated emission sources, for the 9 kHz to 30 MHz frequency range. As a potential application, it is assumed the use of the equivalent sources, obtained based on experimental measurements, directly, on simulations of the resulting electromagnetic environments. The application of this methodology, although considered as a simplified one, may contribute to reduce the current experimental and theoretical restrictions and difficulties regarding the electromagnetic compatibility studies of electrical and electronics systems, like the on-board systems etc.

Given the interest on underwater axisymmetric cylindrical bodies for the development of high-speed underwater weapons, characterization of the boundary layer flow-induced noise received by a Sound NAvigation and Ranging (SONAR) is very important to improve sonar detection ranges. The debate on generating mechanisms of the flow induced noise received at the stagnation point is still on as there is no experimental evidence conclusively suggesting whether it is a near-field or far-field phenomenon, thereby introducing an element of uncertainty in the prediction models. Further, the models developed thus far were based on low Reynolds numbers involving flows in water tunnels and buoyant vehicles. Therefore, the main focus of the thesis is to measure the flow induced noise using a sonar fitted at the most forward stagnation point of an underwater axisymmetric body as realistically as possible and predict the same theoretically for identifying a suitable flow noise model for future use by designers. In order to meet the stated goal, two exclusive experiments were conducted at sea using an underwater autonomous high-speed axisymmetric vehicle fitted with a planar hydrophone array (8X8) in its nose cone which measured the flow noise signature. Two different sets of existing models are used in characterizing the flow noise received by the array, while the first set comprises of models developed based on the Turbulent Boundary Layer induced noise and other is based on the transition zone radiated noise model. Through this study, it was found that the transition zone radiated noise model is in close agreement with the measured data.

Disertace popisuje současné problémy v certifikaci malých letadel, které by se měly v budoucnu řešit numerickým modelováním. Tento postup má zefektivnit návrh a zlevnit certifikaci letadel. Práce je úzce spjata s projektem HIRF-SE, který se problematikou certifikace letadel numerickými metodami zabývá. Podstatná část práce je věnována popisu dvou modulů pro platformu HIRF-SE: řešič BUTFE založený na metodě konečných prvků v časové oblasti a budicí nástroj BUTFE_EXC. Práce popisuje řešení pohlcujících okrajových podmínek, modelování disperzních a anizotropních materiálů a aproximaci tenkých drátů. Speciální pozornost je věnována řešení aproximace tenkých drátů s ostrými ohyby, jejíž současná formulace způsobuje překryvy mezi jednotlivými segmenty drátu.

This work investigates the application of active noise control (ANC) to speech. ANC has had success reducing tonal noise. In this work, that success was extended to noise that is not completely tonal but has some tonal elements such as speech. Limitations such as causality were established on the active control of human speech. An optimal configuration for control actuators was developed for a sphere using a genetic algorithm. The optimal error sensor location was found from exploring the nulls associated with the magnitude of the radiated pressure with reference to the primary pressure field. Both numerically predicted and experimentally validated results for the attenuation of single frequency tones were shown. The differences between the numerically predicted results for attenuation with a sphere present in the pressure field and monopoles in the free-field are also discussed.The attenuation from ANC of both monotone and natural speech is shown and a discussion about the effect of causality on the results is given. The sentence “Joe took father’s shoe bench out” was used for both monotone and natural speech. Over this entire monotone speech sentence, the average attenuation was 8.6 dB with a peak attenuation of 10.6 dB for the syllable “Joe”. Natural speech attenuation was 1.1 dB for the sentence average with a peak attenuation on the syllable “bench” of 2.4 dB. In addition to the lower attenuation values for natural speech, the pressure level for the word “took” was increased by 2.3 dB. Also, the harmonic at 420 Hz in the word “father’s” of monotone speech was reduced globally up to 20 dB. Based on the results of the attenuation of monotone and natural speech, it was concluded that a reasonable amount of attenuation could be achieved on natural speech if its correlation could approach that of monotone speech.

Ce manuscrit se focalise sur l’effet de divers matériaux composites sur les différentes problématiques de compatibilité électromagnétique dans un véhicule automobile. Les modèles surfaciques des matériaux diélectriques sont validés en confrontant des résultats de mesures et de simulation de leurs permittivités. Ceux des matériaux conducteurs le sont en confrontant le modèle d’impédance de surface à un modèle filaire et en effectuant des mesures des simulations de paramètres S sur une structure majoritairement constituée par un matériau de ce type. Dans les deux cas, la technique de modélisation donne de bons résultats. L’évaluation de l’effet de ces matériaux sur les problématiques de CEM au niveau d’un véhicule est faite sur un démonstrateur qui intègre les équipements et les faisceaux embarqués dans un véhicule en les représentants par des monopôles et des fils conducteurs. L’évaluation des effets des différents matériaux composites sur les problématiques CEM est faite par mesure et simulation des couplages électromagnétiques à l’intérieur du démonstrateur et entre le démonstrateur et une antenne test. L’analyse des couplages électromagnétiques confirme que le modèle d’impédance de surface reproduit assez bien les comportements des matériaux composites étudiés. Concernant l’effet des matériaux composites sur les problématiques CEM au niveau d’un véhicule, cette étude mène à deux résultats majeurs du point de vue de la compatibilité électromagnétique. Le premier concerne l’usage des matériaux diélectriques qui augmente globalement la plupart des couplages mesurés de 5 dB à 30 dB. Le second porte sur le matériau conducteur étudié qui n’a quasiment aucun effet sur les différents couplages analysés en comparaison de la structure en acier. / The main concern of this thesis is the characterization of the impacts of some composite materials on the main electromagnetic compatibility issues in a vehicle. The surface models of the dielectric materials are validated by confronting their simulated and measured permittivity. The surface model of the studied conductive material is validated by confronting it to a wire model and by measuring and simulating the S parameters on a structure constituted by such a material. It appears in both cases of dielectric and conductive composite materials that the surface impedance modeling technique gives a good description of the materials. The analysis of the effects of these materials on the EMC issues within a vehicle is done by use of a demonstrator representing the car body. The different equipment and harnesses embedded in a vehicle are represented in the demonstrator by some wires and monopoles. The evaluation of the impact of the composite materials on the EMC issues is done by measuring and simulating the different couplings within the demonstrator and between the demonstrator and a test antenna. The analysis of the different couplings confirms that the surface impedance material modeling approach describes well the materials under test. Concerning the impact of the composite materials on the EMC issues at a vehicle level, this analysis fulfills two main results. The first one concerns the dielectric materials. Indeed the use of these materials increases the different coupling by a value varying between at least 5 dB to 30 dB. The second conclusion concerns the use of conductive composite materials. It appears that they have no effect on the different couplings in comparison to the full steel structure.