A new dual-boron-cored luminogen ligated with a nitrogen-containing multidentate ligand and four bulky phenyl rings was readily synthesized. The unique molecular structure endows this BN-containing luminogen with rich photophysical properties in either solution or in the solid state, including a large Stokes shift, aggregation induced emission activity and reversible piezochromism. Furthermore, this BN-containing luminogen exhibits good capabilities for imaging living cells and sensing of fluoride anions.

We discuss approaches to increase the light outcoupling efficiency in organic microcavity (MC) lasers and organic light-emitting diodes (OLEDs). We find that the introduction of metals into the cavities leads to additional Tamm-plasmon polariton modes, while the corrugation of metal contacts, such as perforated m-size holes or a periodic array of metal stripes, leads to 2D confinement of the cavity modes, which in turn reduces the lasing threshold in MCs. Furthermore, we elucidate light loss mechanisms in OLEDs and reveal how external dielectric layers and periodic gratings can be used to enhance outcoupling from the OLED cavity.

Organic electronic devices like organic solar cells and organic light-emitting diodes quickly degrade in ambient conditions if left unprotected. High susceptibility to moisture necessitates their encapsulation. The maximum water ingress acceptable to achieve reasonable lifetimes ranges several orders of magnitudes below industrial flexible barrier solutions. In this work, an electrical Ca-Test is used to optimize and investigate moisture barriers towards their application in device encapsulation. Aside from substantial improvement of the measurement system, atomic layer deposited, sputtered, and thermally evaporated barriers are screened and their water vapor transmission rates measured down to 2*10^(-5) g(H2O)/(m²*d) at 38 °C and 90% RH. Completely new encapsulation techniques are presented using novel molecular layer deposition interlayers or lamination of independently processed barriers. This way, simple Al layers become high-end moisture barriers. Furthermore, different single layer barriers are exposed to a wide variety of climates. An in-depth analysis of water permeation mechanics reveals sorption governed by Henry's law as well as dominance of interface diffusion below the barrier at late test stages. Investigated moisture barriers are applied to organic light-emitting diodes as well as solar cells and great improvements of lifetimes are observed. In addition, significant improvements in stability towards water ingress are witnessed upon the integration of adhesion layers at the cathode interface. Lastly, the great potential and applicability of this technology is showcased by the production and aging of fully flexible, highly efficient, stable organic solar cells. / Organische Elektronik-Bauteile wie organische Solarzellen und organische Leuchtdioden degradieren in kürzester Zeit, wenn sie ungeschützt feuchter Luft ausgesetzt sind. Ihre starke Anfälligkeit gegenüber Wasserdampf macht ihre Verkapselung notwendig. Der maximale Wassereintritt, der für sinnvolle Lebensdauern noch zulässig erscheint, liegt jedoch noch mehrere Größenordnungen unter dem, was mit existierenden Technologien erreicht werden kann. In der vorliegenden Arbeit wird ein elektrischer Kalzium-Korrosionstest benutzt, um Barrieresysteme auf ihre Anwendbarkeit als Verkapselung organischer Bauelemente hin zu untersuchen und zu optimieren. Abgesehen von signifikanten Verbesserungen am Messsystem werden Wasserdampfbarrieren aus Atomlagenabscheidungs-, Kathodenzerstäubungs- und Verdampfungsprozessen vermessen. Dabei werden außerordentlich niedrige Wasserdampfdurchtrittsraten von nur 2*10^(-5) g(H2O)/(m²*d) in einem Alterungsklima von 38 °C und 90% relativer Feuchte verzeichnet. Vollkommen neue Verkapselungstechniken werden realisiert, wie etwa die Integration von Zwischenschichten durch Molekularlagenabscheidung oder die Lamination zweier Barrieren, die unabhängig voneinander prozessiert werden. Dieser Prozess verwandelt einfache Al Schichten in qualitativ hochwertige Wasserdampfbarrieren. Des Weiteren werden verschiedene Einzelschicht-Barrieren einer breiten Klimavariation ausgesetzt. Dies ermöglicht die genaue Analyse der Permeationsmechanismen des Wassers. Es wird gezeigt, dass Sorption hier dem Henry'sche Gesetz folgt. Diffusion entlang der Grenzfläche unterhalb der Barriere dominiert die Permeation zu späten Testzeiten. Die untersuchten Wasserdampfbarrieren werden an organischen Leuchtdioden und Solarzellen erprobt und zeigen große Verbesserungen bezüglich ihrer Lebensdauern. Darüber hinaus zeigt sich eine stark verbesserte Resistenz gegenüber Wassereintritt, wenn eine zusätzliche Adhäsionsschicht unter der Kathodengrenzfläche integriert wird. Letztendlich zeigt sich das große Potential und die Anwendbarkeit der Ergebnisse in der hohen Effizienz und langen Lebensdauer vollflexibler, verkapselter organischer Solarzellen.

The synthesis, photophysical and electronic properties of a series of novel boron containing fused and ladder type donor-acceptor (D-A) oligomers and polymers are reported. The synthesis was achieved through coordination of the basic functionality of the ubiquitous benzothiadiazole acceptor unit onto a boron Lewis acid followed by an electrophilic aromatic borylation resulting in the formation of fused and ladder type structures (termed borylative fusion). The novel C,N-chelated borane structures disclosed herein are a new member of a large family of tetra-coordinate organoboron compounds that are used for the construction of highly emissive materials. Upon borylation large bathochromic shifts in the absorption and fluorescence spectra were observed, DFT and cyclic voltammetry demonstrate that this is a result of a significant reduction of the LUMO energy levels whist the HOMO energy levels remains relatively unperturbed. These large bathochromic shifts lead to materials that show far red/NIR emission in the solid state with absolute quantum yields of up to 44%. Furthermore, the frontier molecular orbital energy levels of these fused structures can be modulated through judicious selection of the exocyclic boron substituents. These novel borocycles also proved stable to a range of cross-coupling conditions which facilitated further modulation of the frontier molecular orbitals and emissive properties. Borylative fusion was also applicable to D-A conjugated polymers, this represents a facile post-polymerisation functionalisation that is an effective method of modulating the photophysical properties of D-A conjugated polymers. Solution processed OLEDs with far red/NIR electroluminescence (EL) were fabricated from these materials. These devices showed good external quantum efficiency values (EQE) for the far red/NIR region of the electromagnetic spectrum (EQE > 0.4 % for maximum EL > 700 nm).

This thesis consists of three main studies: magnetic field effects in thermally activated delayed fluorescent (TADF) organic light emitting diodes (OLEDs), magnetic field effects in bipolar and unipolar polythiophene (P3HT) devices and a study of hybrid organic/inorganic perovskite devices. Spin-dependent transport and recombination processes of spin-pair species have been detected by magnetic field effect (MFE) technique in carbon-based semi- conductor devices. Magneto-electroluminescence (MEL) and magneto-conductivity have been measured as a function of the applied magnetic field, B, in light emitting diodes. TADF materials have been used instead of simple fluorescent materials in OLEDs. We have observed very large magnetic response with TADF materials. The second study is magnetic field effects of regio-regular P3HT based OLED devices. P3HT is a well known semiconducting polymer, and its electrical properties such as magneto-conductance can be affected by an applied magnetic field. P3HT was chosen because it exhibits a sign change in magnetoresistance (MR) as the bias is increased. Unipolar and bipolar devices have been fabricated with different electrode materials to understand which model can be best to explain organic magnetoresistance effect, possibly depending on the operating regime of the device. Transport and luminescence spectroscopies were studied to isolate the different mechanisms and identify their fingerprints. The third study is on hybrid organic-inorganic perovskite devices. With the potential of achieving very high efficiencies and the very low production costs, perovskite solar cells have become commercially attractive. Scanning electron microscopy (SEM) images and absorption spectrum of the films were compared in single-step solution, two-step solution and solution-assisted vapor deposition techniques. Grain size, morphology and thickness parameters of perovskite films were studied within these techniques. Perovskite solar cells were fabricated and their efficiencies were measured.

The electronics industry today is one that stands as a multi-billion dollar industry that is increasingly incorporating more and more products that have ever escalating applications in our everyday life. One of the main sectors of this industry, and one that is likely to continue expanding for a considerable number of years are flat-panel displays. Traditionally, the displays market has been dominated by cathode ray tube (CRT) and liquid crystal displays (LCDs) display types. The drawback of such display displays is that they can be bulky, heavy and/or expensive and so there is considerable room for an alternative and superior technology. One possibility is organic semiconductor displays where light-emitting molecules can be dissolved in common solvents before being inkjet printed, spin-coated or even painted onto any surface giving the benefits of simple and cost effective processing. Organic light-emitting diodes (OLEDs) have recently become ever more evident as a major display type. This thesis focuses on the advancement of light-emitting dendrimers towards flat-panel display applications. The particular interest in dendrimers arises because it has been found they are capable of giving solution-processed phosphorescent devices with high efficiency. Throughout the thesis the benefits of the dendrimer concept are repeatedly shown revealing why this could become the ideal organic material for display applications. The thesis introduces various techniques of electroluminescence and photoluminescence measurements before applying such methods to study a large number of light-emitting dendrimers in order to explore the role of intermolecular interactions, how they are related to molecular structure, and how this determines photophysical and charge transporting properties of the dendrimers. By such studies a number of highly efficient solution-processed phosphorescent light-emitting dendrimers have been identified while the efficiency of devices made from these dendrimers has been improved. This has been demonstrated in each of the three primary display colours of red, green and blue. The work detailed thus brings closer the prospect of dendrimer light-emitting diodes being the future flat-panel display type of choice.

The literature surrounding organic small-molecule donor-acceptor systems is summarised for a range of optoelectronic applications (OLEDs, OPVs, OFETs etc.). There is a focus on the key building blocks: 1,3,4-oxadiazole (OXD), diphenylamine (DPA), carbazole (Cbz) and fluorene (F). The incorporation of such moieties into various donor-acceptor systems is discussed with further reference to selected alternative organic donor and acceptor systems. The syntheses of novel bipolar molecules based on a donor-spacer-acceptor (DPA/Cbz-F-OXD) structure and the incorporation of these molecules into single-layer OLEDs is presented. It is demonstrated how the emission colour can be tuned from green to deep blue by systematic manipulation of the structure. A significant result is that high efficiency accompanied with pure, deep blue emission in single-layer OLEDs can be achieved with this structural motif. The incorporation of these materials as part of a simple two-component blend to produce white OLEDs is presented and the modification of the materials to improve electron-transport properties is discussed. The synthesis of DPA-bridge-OXD wire systems is presented with the use of oligo-p-phenyleneethynylene units as a bridge of varying length to investigate the effect on charge transfer between the donor and acceptor. Photophysical studies demonstrate the change in absorption, emission and fluorescence lifetimes as the length scale of the molecules is altered. The synthesis of a series of planarised and twisted DPA-bridge-OXD systems based upon phenylene linkers is discussed. Finally, a series of DPA-F-OXD-anchor molecules is presented for incorporation into DSSC devices. The synthesis of these materials is described and the suitability of various anchoring groups for DSSCs is analysed through photophysical and device studies.

Polyfluorenes are polymers with outstanding properties: They are semi-conducting, relatively rigid, quite stable chemically and thermally, easily substituted and therefore potentially soluble in numerous solvents and more importantly, they exhibit blue electro- and photoluminescence. For all these reasons, these polymers are the subjects of numerous academic and industrial researches.<p>The first subject of this work deal with the design, the synthesis and the characterisation of polyfluorenes end-capped with perylene dicarboximide derivatives. These perylene moieties are able to interact by energy transfer under specific conditions of illumination, proximity and orientation. Their observation by single molecule spectroscopy permitted therefore to gain valuable information concerning the three-dimensional folding of single polyfluorene chains. To complete this study, the synthesis and characterisation of a perylene end-capped trimer of fluorene was performed. This structure being monodisperse, a finer analysis of the energy-transfer occurring between both perylene dyes could be accomplished, which confirmed the structural hypothesis made for the polymer. During these studies, it has been observed that, in addition to the energy transfer occurring between both perylene derivatives, another energy transfer occurs between the polyfluorene backbone and the perylene derivatives upon excitation of the first. This led to the idea of the synthesis of a polyfluorene bearing perylenes dicarboximide as side chains. This perylene-rich polyfluorene has been used to build a photovoltaic cell efficient in the wavelengths of both polyfluorene absorption and perylene carboximide absorption. <p>Another subject of this work was the design, synthesis and characterisation of polyfluorenes bearing bulky phenoxy groups as side-chains. These polymers, due to their lower tendency toward aggregation, exhibited a better stability of their emission colour upon annealing. Similarly, a series of homo- and copolymers of fluorene bearing bulky and hole accepting triphenylamine substituants was synthesised and characterised. In addition to their improved colour stability in comparison with dialkylpolyfluorenes, the LEDs build with these materials exhibited a very low turn on voltage. <p> / Doctorat en sciences, Spécialisation chimie / info:eu-repo/semantics/nonPublished

<p>Solid-state (SS) luminescent materials are an important class of materials in a myriad of technological applications including light-emitting devices (LEDs) and displays, SS lasers, sensors, imaging agents, etc. Unfortunately, the design of efficient SS emitters is often plagued by sensitivity to environment/matrix (e.g. aggregation-induced quenching, AIQ), competing non-radiative relaxation pathways, and complicated emission mechanisms that are difficult to systematically study and tune. Copper-based systems have been proven to be good candidates for SS emissive materials due to their low-cost, high synthetic variation and well-defined features. Examples of copper-cluster systems, specifically, have been shown to be highly stable, exhibit high photoluminescent quantum yields (ΦPL), and are often relatively insensitive to environmental changes. However, many of these systems are complicated in nature, and often evoke additional relaxation pathways. To mitigate these issues, tetranuclear Cu(I)-pyrazolate complexes have been made which exhibit high ΦPL, matrix insensitivity and proceed through one major radiative emission pathway: cluster-centered based phosphorescence (3CC). The pyrazoles are highly tunable, and by increasing the size of the ligand substituents (H, F, Cl/Me/Br), a rigidochromic effect is observed, causing a significant blue-shift in their photoluminescence, making these viable materials for organic LEDs (OLEDs), especially in the deep-blue region. Furthermore, by increasing the chain length of the ligand substituent (e.g., Me → Et), another material which exhibits stimuli-responsive luminochromism in response to solvent vapor or heat can be achieved. This material exhibits blue ↔ green rigidochromic luminescence in response to stimuli via isomerization of the ethyl units from exo ↔ endo resulting in additional steric effects that effectively prevent rigidification of the Cu4 cluster. This additional phenomenon opens the door for further exploration of Cu(I)-pyrazolate complexes for stimuli-responsive luminescent materials (SRLMs) applications.</p>

Organic electronics is a rapidly evolving field with vast number of applications having high potential for commercial success. Although a great progress has been made, many organic electronic applications: organic light-emitting diodes (OLEDs), organic fieldeffect transistors (OFETs), organic solar cells, etc; still require further optimization to fulfill the requirements for successful commercialization. For many applications, available at this time organic materials do not provide satisfactory performance and stability, which hinders the possibility of a large-scale production. Therefore, the key ingredient needed for a successful improvement in performance and stability of organic electronic devices is in-depth knowledge of physical and chemical properties of molecular and polymeric materials. Since many applications encompass several thin film layers made of organics, and often also inorganic materials, the understanding of both organic-organic and hybrid interfaces is yet another important issue necessary for the successful development of organic electronics. The research presented in this thesis is based mainly on photoelectron spectroscopy, which is an experimental technique especially suited to study both surfaces and interfaces of materials. In the thesis, the properties of one of the most successful polymeric materials, poly(3,4-ethylenedioxythiophene), often abbreviated as PEDOT, have been extensively studied. The research was done in close cooperation with an industrial partner – AGFA Gevaert, Belgium. The study was focused on the exploration of the intrinsic properties of the material, such as stability, morphology and conductivity. In addition, however, a possibility of alternation of these properties was also explored. This thesis reports also about investigations of the properties of various organic-organic and hybrid interfaces. The energy level alignment at such interfaces plays important role in charge injection and performance of the thin film organic-based devices. The conditions for different energy level alignment regimes at the various interfaces have been studied. The studies on interfaces were performed in close collaboration with the R&amp;D division of DuPont Corporation, USA. This work led to the significant advances in understanding of the interface energetics and properties of industryrelevant organic materials, as represented not only by published scientific papers, but also patent applications.