The present work deals with the development and application of an acoustic long-period fiber grating (LPG) in conjunction with a special optical fiber (SF). The acoustic LPG converts selected optical modes of the SF. Some of these modes are characterized by complex, yet cylindrically symmetric polarization and intensity patterns. Therefore, they are the guided variant of so called cylindrical vector beams (CVBs). CVBs find applications in numerous fields of fundamental and applied optics. Here, an application to high-resolution light microscopy is demonstrated. The field distribution in the tight microscope focus is controlled by the LPG, which in turn creates the necessary polarization and intensity distribution for the microscope illumination. A gold nanoparticle of 30 nm diameter is used to probe the focal field with sub-wavelength resolution. The construction and test of the acoustic LPG are discussed in detail. A key component is the piezoelectric transducer that excites flexural acoustic waves in the SF, which are the origin of an optical mode conversion. A mode conversion efficiency of 85% was realized at 785 nm optical wavelength. The efficiency is, at present, mainly limited by the spectral positions and widths of the transducer’s acoustic resonances. The SF used with the LPG separates the propagation constants of the second-order polarization modes, so they can be individually excited and are less sensitive to distortions than in standard weakly-guiding fibers. The influence of geometrical parameters of the fiber core on the propagation constant separation and on the mode fields is studied numerically using the multiple multipole method. From the simulations, a simple mode coupling scheme is developed that provides a qualitative understanding of the experimental results achieved with the LPG. The refractive index profile of the fiber core was originally developed by Ramachandran et al. However, an important step of the present work is to reduce the SF’s core size to counteract the the appearance of higher-order modes at shorter wavelengths which would otherwise spoil the mode purity. Using the acoustic LPG in combination with the SF produces a versatile device to generate CVBs and other phase structures beams. This fiber-optical method offers beam profiles of high quality and achieves good directional stability of the emitted beam. Moreover, the device design is simple and can be realized at low cost. Future developments of the acoustic LPG will aim at applications to fiber-optical sensors and optical near-field microscopy. / Diese Arbeit behandelt die Entwicklung und Anwendung eines akustischen langperiodischen Fasergitters (LPG) in Verbindung mit einer optischen Spezialfaser (SF). Das akustische LPG wandelt ausgewählte optische Modi der SF um. Einige dieser Modi weisen eine komplexe, zylindersymmetrische Polarisations- und Intensitätsverteilung auf. Diese sind eine Form der so genannten zylindrischen Vektor-Strahlen (CVBs), welche in zahlreichen Gebieten der wissenschaftlichen und angewandten Optik zum Einsatz kommen. In dieser Arbeit wird eine Anwendung auf die hochauflösende Lichtmikroskopie demonstriert. Die fokale Feldverteilung wird dabei durch die Auswahl der vom LPG erzeugten Modi, welche zur Beleuchtung genutzt werden, eingestellt. Als Nachweis wird die entstehende laterale Feldverteilung mithilfe eines Goldpartikels (Durchmesser 30 Nanometer) vermessen. Aufbau und Test des akustischen LPGs werden im Detail besprochen. Eine wichtige Komponente ist ein piezoelektrischer Wandler, der akustische Biegewellen in der SF anregt. Diese sind die Ursache der Umwandlung optischer Modi. Die maximale Konversionseffizienz betrug 85% bei 785 nm (optischer) Wellenlänge. Die Effizienz ist derzeit hauptsächlich durch die Lage der akustischen Resonanzfrequenzen des Wandlers und deren Bandbreite begrenzt. Die benutzte SF spaltet die Ausbreitungskonstanten von Polarisationsmodi zweiter Ordnung auf, sodass diese individuell angeregt werden können und weniger anfällig gegen über Störungen der Faser sind, als das bei gewöhnlichen, schwach führenden Glasfasern der Fall ist. Das zu Grunde liegende Brechzahlprofil des Faserkerns wurde von Ramachandran et al. entwickelt. Für diese Arbeit wurde jedoch die Ausdehnung des Profils verkleinert – ein erster Schritt um Anwendungen bei kürzeren optischen Wellenlängen zu ermöglichen. Es werden numerische Simulationen mit der Methode der multiplen Multipole zur Berechnung der Modenfelder und den zugehörigen Propagationskonstanten vorgestellt. Diese zeigen u. a. den starken Einfluss von geometrischen Veränderungen des Faserkerns. Basierend auf den Simulationsergebnissen wird ein einfaches Kopplungsschema für die Modi entwickelt, welches ein qualitatives Verständnis der experimentellen Ergebnisse ermöglicht. In Kombination bilden die SF und das LPG ein vielseitiges Gerät zur Erzeugung von CVBs und anderen Strahlen mit komplexer Phasenstruktur. Die Methode besticht durch hohe Qualität des Strahlprofils, stabile Abstrahlrichtung, einfachen Aufbau, elektronische Steuerbarkeit und geringe Materialkosten. Zukünftige Weiterentwicklungen des akustischen LPGs zielen auf die Anwendung in faseroptischen Sensoren und in der optischen Nahfeldmikroskopie ab.

By implementing the rolled-up microfabrication method based on strain engineering, several systems are investigated within the contents of this thesis. The structural morphing of planar geometries into three-dimensional structures opens up many doors for the creation of unique material configurations and devices. An exploration into several novel microsystems, encompassing various scientific subjects, is made and methods for on-chip integration of these devices are presented. The roll-up of a metal and oxide allows for a cylindrical hollow-core structure with a cladding layer composed of a multilayer stack, plasmonic metamaterial. This structure can be used as a platform for a number of optical metamaterial devices. By guiding light radially through this structure, a theoretical investigation into the system makeup of a rolled-up hyperlens, is given. Using the same design, but rather propagating light parallel to the cylinder, a novel device known as a metamaterial optical fiber is defined. This fiber allows light to be guided classically and plasmonically within a single device. These fibers are developed experimentally and are integrated into preexisting on-chip structures and characterized. A system known as lab-in-a-tube is introduced. The idea of lab-in-a-tube combines various rolled-up components into a single all-encompassing biosensor that can be used to detect and monitor single bio-organisms. The first device specifically tailored to this system is developed, flexible split-wall microtube resonator sensors. A method for the capturing of embryonic mouse cells into on-chip optical resonators is introduced. The sensor can optically detect, via photoluminescence, living cells confined within the resonator through the compression and expansion of a nanogap built within its walls. The rolled-up fabrication method is not limited to the well-investigated systems based on the roll-up from semiconductor material or from a photoresist layer. A new approach, relying on the delamination of polymers, is presented. This offers never-before-realized microscale structures and configurations. This includes novel magnetic configurations and flexible fluidic sensors which can be designed for on-chip and roving detector applications.

The scope of this dissertation is to investigate the merits and implications of using multilevel modulation formats in optical communications systems. Following the trend in academia and industry, special focus is placed on quadrature phase-shift keying (QPSK), and specifically on polarization division multiplexed (PDM) QPSK. A special kind of receiver is investigated thoroughly, the digital coherent receiver, the equivalent of the coherent quadrature demodulator in classical communications nomenclature. A large number of digital signal processing (DSP) algorithms are implemented, some of them novel, and their performance is examined, analyzed, and compared in a number of practical system scenarios. The impact of transmitter / receiver imperfections and a number of optical fiber impairments on system performance is studied. Experimental results taken from proof-of-concept experiments are also analyzed. / Η διατριβή αυτή έχει ως σκοπό τη μελέτη οπτικών τηλεπικοινωνιακών συστημάτων που χρησιμοποιούν τετραδικές διαμορφώσεις φάσης, πολυπλεξία κατά πόλωση και σύμφωνους ψηφιακούς δέκτες διαφοροποίησης φάσης και πόλωσης. Μελετήθηκαν αλγόριθμοι επεξεργασίας σήματος κατάλληλοι για εξάλειψη της επίδρασης των φαινομένων διάδοσης και των μη ιδανικοτήτων οπτικών τηλεπικοινωνιακών συστημάτων. Η μελέτη έγινε με προσομοίωση Monte-Carlo, με χρήση ημιαναλυτικής μεθόδου προσδιορισμού της πιθανότητας σφάλματος τηλεπικοινωνιακού συστήματος και με ανάλυση πειραματικών δεδομένων. Τα πειραματικά δεδομένα ελήφθησαν από οπτικό τηλεπικοινωνιακό σύστημα με τετραδική διαμόρφωση φάσης και πολυπλεξία κατά πόλωση με ρυθμούς συμβόλων 0.1-10 GBd (0.4-40 Gb/s). Μελετήθηκαν αλγόριθμοι επανένωσης των πολώσεων, αλγόριθμοι αποπολύπλεξης των πολώσεων, αλγόριθμοι διόρθωσης της ανισοσταθμίας ορθογωνιότητας, αλγόριθμοι εκτίμησης και αφαίρεσης της ενδιάμεσης συχνότητας και αλγόριθμοι εκτίμησης και αφαίρεσης του θορύβου φάσης των laser.

O trabalho tem por objetivo o estudo e o desenvolvimento de interferômetros recuperadores com baixa tensão de meia onda utilizando moduladores eletro-ópticos para serem aplicados em sistemas Interferométricos de luz branca. Ele dá continuidade às pesquisas do autor em seu mestrado, em que foi desenvolvido e testado um sistema de sensoriamento eletro-óptico capaz de medir diretamente tensões de até 69,4 kVRMS. Desta forma aperfeiçoa-se o sistema de processamento de sinais ópticos desenvolvendo um novo interferômetro recuperador, baseado em óptica integrada. Para o desenvolvimento do tema proposto, inicialmente foi feito uma revisão da literatura/bibliografia, baseada em livros, artigos e teses, visando identificar o \"estado da arte\" relacionado aos moduladores eletro-ópticos para definir o tipo de modulador mais adequado à aplicação em vista. O estudo resultou na escolha de um componente em óptica integrada que foi aplicado numa configuração inédita em um protótipo de transformador de potencial óptico para medição de elevados níveis de tensão elétrica. As características de desempenho deste protótipo foram comparadas com as do protótipo previamente construído. Como resultado deste trabalho, amplia-se o conhecimento e fixa-se em âmbito nacional o domínio sobre as técnicas de construção de interferômetros recuperadores baseados em óptica integrada aplicáveis à recuperação de sinais ópticos em sistemas interferométricos para medição de altas tensões. / This work has as objective the study and development of low half-wave voltage recovery interferometers using electro-optical modulators to be applied to white light interferometric systems. This work is a continuation in the research carried out by the author to obtain his master degree, in which it was developed and tested an electro- optic sensing system capable to measure direct voltage to 69.4 kVrms. In the present work the optical signals processing system is improved by developing a new recovery interferometer based on integrated optics. To develop the proposed subject, initially a review of the literature, based on books, articles and thesis, has been done aiming to identify the State of the Art related to electro-optic modulators and helping to define the most suitable type of modulator for the desired application. The study resulted in the selection of an integrated optical device arranged in an unpublished configuration that was applied to a prototype of optical voltage transformer, intended to measure high voltage levels. The performance of this prototype was compared with a previous version. The results of this work increase the knowledge of the construction techniques of recovery interferometers based on integrated optic devices applicable to the recovering of optical signals in interferometric systems for high voltage measurement.

[pt] Com a crescente demanda por maior capacidade na transmissão de dados, uma solução tem sido estudada para transmissão de rádio sobre fibra combinando múltiplos canais de dados sobre a portadora óptica na rede de acesso baseada em multiplexação por sub-portadoras. Ademais, essa rede de acesso é comumente ramificada na forma de uma rede óptica passiva. Monitoramento desses enlaces em fibra é, então, cada vez mais importante. A tecnologia atual de reflectometria óptica no domínio do tempo utilizada para monitoramento opera em um comprimento de onda óptico separado e possui ampla largura de banda de detecção, tornando-se relativamente cara. A busca por uma alternativa de monitoramento de alta precisão e baixo custo é de suma importância para a oferta de transmissão com garantia de qualidade de serviço. Neste trabalho, o uso de multiplexação por sub-portadoras é explorado, incorporando uma técnica de monitoramento de varredura de tom de baixa frequência na transmissão de dados. Um modelo matemático para a resposta em frequência do enlace foi derivado e a localização e a intensidade de uma falha são estimadas através da comparação com a amplitude e a fase detectadas da luz retroespalhadaa medida em que é feita uma varredura de frequência do sinal de monitoramento, aplicando-se um algoritmo de minimos quadrados. O modelo proposto considera que a medida do enlace antes da ocorrência de uma falha é conhecida. Uma única falha nova pode então ser detectada com precisão e sua posição e intensidade são estimadas da maneira descrita. / [en] With ever growing demand for higher capacity in data transmission, a solution has been proposed for analog Radio over Fiber transmission, combining several data channels over the optical carrier in the access network using Sub-Carrier Multiplexing (SCM). Furthermore, this access network is often branched in the form of a passive optical network (PON). Monitoring such fiber links is thus increasingly important. Current optical time domain reflectometry (OTDR) technology used for monitoring operates at a separate optical wavelength and has wide bandwidth detection, making it relatively costly. The pursuit of a low cost, high precision monitoring alternative is of paramount importance for cost effective quality of service (QoS) improvement. In this work employment of SCM for data multiplexing is exploited embedding a low frequency tone sweep monitoring technique into data transmission. A mathematical model for the frequency response of the link was derived and the fault location and intensity is estimated through comparison with acquired amplitude and phase of the backscattered light for the varying frequency by applying a simple least mean squared (LMS) algorithm. The modeling suggested requires that measurement of the link prior to the occurrence of a fault is known. A single new fault can then be accurately detected and its position and intensity estimated in the way described.

Photonics and Optical techniques have advanced recently by a great extend to play an important role in Microwave and Radar applications. Antenna array of modern active phased array radars consist of multiple low power transmit and receive mod- ules. This demands distribution of the various Local Oscillator(LO) signals for up conversion of transmit signals and down conversion of receive signals during various modes of operation of a radar system. Additionally, these receivers require control and clock signals which are digital and low frequency analog, for the synchronization between receive modules. This is normally achieved through RF cables with complex distribution networks which add significantly higher additional weight to the arrays. During radar operations, radio frequency (RF) transmit signal needs to be distributed through the same modules which will in turn get distributed to all antenna elements of the array using RF cables. This makes the system bulky and these large number of cables are prone to Electromagnetic Interference (EMI) and need additional shielding. Therefore it is very desirable to distribute a combination of these RF, analog and digital signals using a distribution network that is less complex, light in weight and immune to EMI. Advancements in Optical and Microwave photonics area have enabled carrying of higher datarate signals on a single fiber due to its higher bandwidth capability including RF signals. This is achieved by employing Wavelength Division Multi- plexing (WDM) that combine high speed channels at different wavelengths. This work proposes, characterizes and evaluates an optical Wavelength Division Multiplexed(WDM) distribution network that will overcome the above mentioned problems in a phased array radar application. The work carries out a feasibility analysis supported with experimental measurements of various physical parameters like am- plitude, delay, frequency and phase variation for various radar waveforms over WDM links. Different configurations of optical distribution network are analyzed for multipoint distribution of both digital and RF signals. These network configurations are modeled and evaluated against various parameters that include power level, loss, cost and component count. A configuration which optimizes these parameters based on the application requirements is investigated. Considerable attention is paid to choose a configuration which does not provide excess loss, which is economically viable, compact and can be realized with minimum component count. After analysing the link configuration, multiplexing density of the WDM link is considered. In this work, since the number of signals to be distributed in radar systems are small, a coarse WDM(CWDM) scheme is considered for evaluation. A comparative study is also performed between coarse and dense WDM (DWDM) links for selection of a suitable multiplexing scheme. These configurations are modeled and evaluated with power budgeting. Even though CWDM scheme does not permit the utilisation of the available bandwidth to the fullest extent, these links have the advantage of having less hardware complexity and easiness of implementation. As the application requires signal distribution to thousands of transmit-receive modules, amplifiers are necessary to compensate for the reduction of signal level due to the high splitting ratio. Introduction of commonly available optical amplifiers like Erbium Doped Fiber Amplifier (EDFA), affect the CWDM channel output powers adversely due to their non-flat gain spectrum. Unlike DWDM systems, the channel separation of CWDM systems are much larger causing significantly high channel gain differences at the EDFA output. So an analysis is carried out for the selection of a suitable wavelength for CWDM channels to minimize the EDFA output power variation. If the gain difference is still significant, separate techniques needs to be implemented to flatten the output power at the antenna end. A CWDM configuration using C-band and L-band EDFAs is proposed and is supported with a feasibility analysis. As a part of evaluation of these links for radar applications, a mathematical model of the WDM link is developed by considering both the RF and digital sig- nals. A generic CWDM system consisting of transmitters, receivers, amplifiers, multiplexers/ demultiplexers and detectors are considered for the modeling. For RF signal transmission, the transmitters with external modulators are considered. Mod- eling is done based on a bottom-top approach where individual component models are initially modeled as a function of input current/power and later cascaded to obtain the link model. These models are then extended to obtain the wavelength dependent model ( spectral response) of the hybrid signal distribution link Further mathematical analysis of the developed link model revealed its variable separable nature in terms of the input power and wavelength. This led to significant reduction in the link equation complexity and development of some approximation techniques to easily represent the link behavior. The reduced form of the link spectral model was very essential as the initially developed wavelength model had a lot of parametric dependency on the component models. This mathematical reduction process led to simplification of the spectral model into a product of two independent functions, the input current and wavelength. It is also noticed that the total link power within specific wavelength range can be obtained by the integrating these functions over a specific link input power. After the mathematical modelling, an experimental prototype physical link is set up and characterized using various radar signals like continuous wave (CW) RF, pulsed RF, non linear frequency modulated signal (NLFM) etc. Additionally a proof of concept Radio-Over-Fiber (RoF) link is established to prove the superior transmission of microwave signal through an optical link. The analysis is supported with measurements on amplitude, delay, frequency and phase variations. The NLFM waveforms transmissions are further analysed using a matched _ltering process to confirm the side lobe requirement. Further a prototype WDM link is built to study the performance when digitally modulated channels are also multiplexed into the link. The link is again validated for signal levels, delay, frequency and phase parameters. Since amplitude and delay are deterministic, it is proposed that these parameter variations can be compensated by using suitable components either in the electrical or the optical domain. Radar systems use low frequency digital signals of different duty-cycles for synchronization and control across various transmit-receive modules. In the proposed link, these digital signals also modulate a WDM channel and hence the link is called a hybrid system. As the proposed link has EDFA to compensate for the splitting losses, there are chances of transient effects at the EDFA output for these low bitrate channels. Owing to the long carrier lifetime, low bitrate digital channels are prone to EDFA transient effects under specific signal and pump power conditions. Additionally, the synchronization signals used in radar application vary the duty-cycle over time, which is found to introduce variations in transient output. This practical challenge is further studied and the thesis for the first time, includes an analysis of EDFA transient e_ects for variable duty-cycle pulsed signals. The analysis is carried out for various parameters like bitrate, input power, pump power and duty-cycle. Investigations on EDFA transients on variable duty-cycle signals help in proposing a viable method to predict the lower duty-cycle transients from higher duty-cycle transients. The predicted transients were again validated against simulated transients and experimental results. As these transient effects are not desirable for radar signals, we propose a novel transient suppression techniques in optical and electrical domain which are validated with simulation and experimental measures. One suppression technique tries to avoid transient effect by keeping the optical input to EDFA always constant by feeding an inverted version of the original pulse into the EDFA along with the actual pulse. It is observed that as the wavelength of the inverted pulse is closer to the original input pulse, the transient effect settles faster. These EDFA transients are evaluated with WDM link configurations, where both high and low bitrate signals are co-propagated. Another challenging aspect of the link operation is the non-at gain spectrum of EDFA. i.e., EDFA provides unequal power level for various signals at WDM link output. This is especially true in the case of local oscillator signals, where it is preferable to have the same amplitude signals before feeding it to the mixer stages. But in the radar applications, this will require additional hardware circuits to equalize the signal level within a phased array antenna. This work also proposes some of the power equalization methods that can be used along with the WDM links. This part of the work is also supported with simulation model and experimental results. The analytical and experimental study of this thesis aids the evaluation process of a suitable optical Wavelength Division Multiplexed(WDM) distribution network that can be used for the distribution of both RF and digital signals. The optical WDM links being superior with its light weight, less loss and EMI/ EMC immunity provides a better solution to future class of radars.

Made available in DSpace on 2016-03-15T19:38:52Z (GMT). No. of bitstreams: 1 Henrique Guimaraes Rosa.pdf: 6486656 bytes, checksum: 6fc9fe7875ed2cceb89c9f5179b9f028 (MD5) Previous issue date: 2015-02-25 / Fundo Mackenzie de Pesquisa / In this thesis, we present results on the fabrication, transfer and characterization of chemical vapor deposition (CVD) graphene and exfoliated graphene over glass and optical fiber substrates, to study optical properties of graphene and its application as a saturable absorber for Erbium-doped fiber laser (EDFL). Monolayer CVD graphene and stacked CVD graphene samples were fabricated and characterized, transferred to the transverse face of optical fibers, and a study on the relation between the optical properties of graphene samples and the properties of ultrashort laser pulses generated in (EDFL) was performed. Furthermore, we have developed a technique for transferring exfoliated nanomaterials which allowed us to transfer exfoliated graphene onto optical fiber s faces and align the graphene flake to the fiber core. With this transfer technique it is possible to fabricate samples with controlled number of graphene layers onto optical fiber faces. As application, we demonstrate ultrashort pulse generation in Erbium-doped fiber laser with exfoliated monolayer graphene samples as saturable absorber. This is the first time that ultrashort laser pulses are generated with a single exfoliated monolayer graphene sample. / Nesta tese, apresentamos resultados sobre a fabricação, transferência e caracterização de grafeno CVD (grafeno fabricado por deposição química de vapor chemical vapour deposition) e de grafeno esfoliado em substratos de vidro e em fibras ópticas, para o estudo das propriedades ópticas do grafeno e sua aplicação como absorvedor saturável em laser à fibra dopada com Érbio (EDFL). Foram fabricadas e caracterizadas amostras de grafeno CVD monocamada e de grafeno CVD empilhado, transferidas para a face transversal de fibras ópticas, e com estas amostras foram feitos estudos sobre a relação entre as propriedades ópticas do grafeno e as propriedades de pulsos ultracurtos gerados em EDFL. Além disto, desenvolvemos uma técnica para a transferência de nanomateriais esfoliados que permitiu a transferência de grafeno esfoliado para fibras ópticas e seu alinhamento com o núcleo da fibra. Com esta técnica de transferência é possível fabricar amostras com controlado número de camadas de grafeno em fibra óptica. Como aplicação, demonstramos a geração de pulsos em EDFL com uma amostra de grafeno esfoliado monocamada como absorvedor saturável. Esta é a primeira vez que pulsos ultracurtos são gerados em lasers à fibra com amostra de grafeno esfoliado de uma única camada sobre a face transversal da fibra óptica.

In this thesis we provide a model for a bufferless optical burst switching (OBS) and an optical packet switching (OPS) network. The thesis is divided in three parts. <p><p>In the first part we introduce the basic functionality and structure of OBS and OPS networks. We identify the blocking probability as the main performance parameter of interest. <p><p>In the second part we study the statistical properties of the traffic that will likely run through these networks. We use for this purpose a set of traffic traces obtained from the Universidad Politécnica de Catalunya. Our conclusion is that traffic entering the optical domain in future OBS/OPS networks will be long-range dependent (LRD). <p><p>In the third part we present the model for bufferless OBS/OPS networks. This model takes into account the results from the second part of the thesis concerning the LRD nature of traffic. It also takes into account specific issues concerning the functionality of a typical bufferless packet-switching network. The resulting model presents scalability problems, so we propose an approximative method to compute the blocking probability from it. We empirically evaluate the accuracy of this method, as well as its scalability. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

Cette thèse est consacrée à l'étude de la réponse aux radiations d'amplificateurs à fibre optiques dopées Er 3+ et Yb3+. Ces dispositifs fonctionnant à 1,5 µm ont été conçus pour des applications spatiales et l'évaluation de leurs performances revêt d’une importance capitale dans un tel environnement hostile. Deux traitements, le chargement en H2 et le co-dopage au Ce du cœur de la fibre, ont été étudiés comme solutions de durcissement aux radiations. Une étude spectroscopique a permis d’approfondir la connaissance des mécanismes physiques de base responsables de la dégradation de ces composants et par conséquent de proposer des solutions de durcissement. La thèse est organisée en trois parties. La Partie I présente une description générale des fibres dopées aux ions de Terres Rares (TR), avec l'introduction des concepts de base de la physique de tels éléments et leur interaction avec la matrice hôte (verre phosphosilicate). L'état de l'art concernant les effets des rayonnements sur les fibres dopées aux TR est également présenté. La Partie II décrit les échantillons et les techniques expérimentales utilisées. La Partie III décrit les principaux résultats dont les tests, en configuration active, démontrent que le co-dopage au Ce ainsi que le chargement en H2 ont un rôle-clé dans la limitation des pertes induites par rayonnement. L'analyse spectroscopique de la matrice vitreuse (Raman) et des ions TR (par mesures de luminescence stationnaire et résolue en temps) mettent en exergue un fort effet de durcissement, conduisant à une préservation de l'efficacité du système physique en opération / This thesis is devoted to the study of the radiation response of optical amplifiers based on Er/Yb doped fibers. These devices operating at 1.5 µm are conceived for space applications and contextually the evaluation of their performance in such harsh environment becomes of crucial importance. Two treatments, the H2-loading and the Ce-doping of the fiber core, are investigated as radiation hardening solutions. A spectroscopic study has been associated, in order to improve the knowledge of the physical mechanisms responsible for the signal degradation and the action of the hardening solutions. The thesis is organized in three parts. Part I deals with a general description of the Rare-Earth (RE)-doped fibers, with the introduction of some basic concepts of the RE-ion physics and their interaction with the host matrix material (phosphosilicate glass). The state-of-art of the radiation effects on the optical fibers, particularly the RE- doped fibers, is also overviewed. Part II describes the samples (fiber fabrication, geometry and chemical compositions), and the used experimental techniques, including a short discussion on the related theoretical background. Part III describes the main results; firstly, the active tests, performed on the RE-doped fiber as part of an optical amplifier, demonstrate that the Ce-codoping and H2-load have a key-role in the limitation of the radiation induced losses. Then, the spectroscopic analysis of the phosphosilicate glass (Raman study) and of the RE-ions (stationary and time-resolved luminescence) show a stabilization effect due to the two treatments, leading to a preservation of the high efficiency of the physical system under study

Les formats de modulation bidimensionnels (i.e. basés sur l’amplitude et la phase de l’onde porteuse) ont gagné depuis peu le domaine des transmissions par fibre optique grâce aux progrès conjoints de l’électronique rapide et du traitement du signal, indispensables pour réaliser les récepteurs opto-électroniques utilisant la détection cohérente des signaux optiques. Pour pallier les limites actuelles en rapidité de commutation des circuits intégrés électroniques, une voie de recherche a été ouverte il y a quelques années, consistant à utiliser des technologies optiques pour faciliter la parallélisation du traitement du signal, notamment dans l’étape d’échantillonnage ultra-rapide du signal rendu possible par des horloges optiques très performantes. Le thème principal de cette thèse concerne l’étude théorique et expérimentale de la fonction de conversion analogique-numérique (ADC) de signaux optiques par un récepteur opto-électronique cohérent, associant les étapes d’échantillonnage optique linéaire, de conversion analogique-numérique et de traitement du signal. Un prototype, utilisant une solution originale pour la source d’échantillonnage, est modélisé, réalisé et caractérisé, permettant la reconstruction temporelle de signaux optiques modulés selon divers formats : NRZ, QPSK, 16-QAM. Les limitations optiques et électroniques du système sont analysées, notamment l’impact sur la reconstruction des signaux de divers paramètres : le taux d’extinction de la source optique, les paramètres de l’ADC (bande passante BW, temps d’intégration et nombre effectif de bits ENOB). Par ailleurs, de nouveaux algorithmes de traitement du signal sont proposés dans le cadre de la transmission optique cohérente à haut débit utilisant des formats de modulation bidimensionnels (amplitude et phase) : deux solutions sont proposées pour la compensation du déséquilibre de quadrature IQ dans les transmissions mono-porteuses: une méthode originale de l’estimation du maximum du rapport signal sur bruit ainsi qu’une nouvelle structure de compensation et d’égalisation conjointes; ces deux méthodes sont validées expérimentalement et numériquement avec un signal 16-QAM. Par ailleurs, une solution améliorée de récupération de porteuse (décalage de fréquence et estimation de la phase), basée sur une décomposition harmonique circulaire de la fonction de maximum de vraisemblance logarithmique, est validée numériquement pour la première fois dans le contexte des transmissions optiques (jusqu’à une modulation de 128-QAM). Enfin les outils développés dans ce travail ont finalement permis la démonstration d’une transmission sur 100 km d’un signal QPSK à 10 Gbaud fortement limité par un bruit de phase non linéaire et régénéré optiquement à l’aide d’un limiteur de puissance préservant la phase basé sur une nanocavité de cristal photonique. / Bi-dimensional modulation formats based on amplitude and phase signal modulation, are now commonly used in optical communications thanks to breakthroughs in the field of electronic and digital signal processing (DSP) required in coherent optical receivers. Photonic solutions could compensate for nowadays limitations of electrical circuits bandwidth by facilitating the signal processing parallelization. Photonic is particularly interesting for signal sampling thanks to available stable optical clocks. The heart of the present work concerns analog-to-digital conversion (ADC) as a key element in coherent detection. A prototype of linear optical sampling using an original solution for the optical sampling source, is built and validated with the successful equivalent time reconstruction of NRZ, QPSK and 16-QAM signals. Some optical and electrical limitations of the system are experimentally and numerically analyzed, notably the extinction ratio of the optical source or the ADC parameters (bandwidth, integration time, effective number of bits ENOB). Moreover, some new DSPs tools are developed for optical transmission using bi-dimensional modulation formats (amplitude and phase). Two solutions are proposed for IQ quadrature imbalance compensation in single carrier optical coherent transmission: an original method of maximum signal-to-noise ratio estimation (MSEM) and a new structure for joint compensation and equalization; these methods are experimentally and numerically validated with 16-QAM signals. Moreover, an improved solution for carrier recovery (frequency offset and phase estimation) based on a circular harmonic expansion of a maximum loglikelihood function is studied for the first time in the context of optical telecommunications. This solution which can operate with any kind of bi-dimensional modulation format signal is numerically validated up to 128-QAM. All the DSP tools developed in this work are finally used in a demonstration of a 10 Gbaud QPSK 100 km transmission experiment, featuring a strong non-linear phase noise limitation and regenerated using a phase preserving and power limiting function based on a photonic crystal nanocavity.