Acenes have been explored by a number of research groups in the field of organic electronics with a particular emphasis on transistor materials. This group has been actively studying acene‐based organic semiconductors for more than a decade using a crystal engineering approach and has developed acene derivatives for applications in field‐effect transistors, light‐emitting diodes, and photovoltaics. In addition to organic electronics, crystal engineering has important applications in a number of other fields, quite notably in the design of metal‐organic frameworks. Chapters 2 and 3 of this dissertation focus on applying crystal engineering to the synthesis of acene derivatives for use as solid‐state, long‐wavelength fluorescent organic dyes in the field of biomedical imaging. More specifically, this work studied the synthesis and properties of dioxolane‐functionalized pentacenes and hexacenes. One of these pentacene derivatives has already been demonstrated in biomedical imaging which may lead to improved treatment of tuberculosis. The dioxolane‐functionalized hexacene is still under evaluation for bioimaging applications. Chapters 4 and 5 focus on crystal engineering in relation to organic electronics. Chapter 4 deals with fine‐tuning of crystal packing and demonstrated that small differences in molecular structure can result in significant changes to the solid‐state structure which affects semiconductor properties. Finally, chapter 5 studies the use of singlet fission in photovoltaics and demonstrated that this process does occur in a solar cell incorporating a hexacene derivative. Pentadithiophenes were also synthesized for singlet fission photovoltaics, but they have yet to be studied further.

No description available.

This thesis presents an investigation of the lasing dynamics and optical amplification devices using conjugated polymers. Spectroscopic studies of conjugated polymers and dendrimers were also performed. Conjugated polymers and dendrimers are materials with great potential as display materials and tuneable lasers due to their broad spectra and high optical gains. The effect of conjugation is studied in MEH-PPV and an anisotropy measurement of two different cored dendrimers has been shown to verify a theoretical prediction on their depolarisation. Singlet emission from a highly efficient phosphorescent dendrimer is also observed and is the first known report of fluorescence from this class of dendrimers. Conjugated polymers exhibit optical gain over broad spectral ranges, which has led to much interest in their potential as novel laser gain media. Investigations into lasing from conjugated polymers has been confined mainly to studying the lasing properties and not the temporal dynamics of the laser pulses. In this work an investigation into the lasing dynamics of a 2D-DFB conjugated polymer laser is demonstrated with the first subpicosecond laser pulses observed for a polymer laser. A novel encapsulated laser fabricated via a soft lithography route was also studied and exhibited laser pulse of 6 ps duration. The high gain observed over broad spectral ranges also means that these materials are suitable for use as optical amplifiers. Broadband gain in a conjugated polymer solution was demonstrated with a gain of 30 dB accessible across a 60 nm wavelength range. In the solid state the limited thickness of films (~ 100 nm) and the uneven nature of the film edges had limited the ability to study the amplification of a probe signal. The first practical solid state conjugated polymer amplifier has been demonstrated. The device uses grating structures to couple a probe signal into and out of the gain region. The gain dynamics of different length amplifiers were studied and an 18 dB gain was observed in a 300 µm device length using a conjugated polymer blend of RedF and F8BT. Further work on a conjugated polymer MEH-PPV led to a 21dB gain in a 1 mm device.

Cette thèse s’inscrit dans le domaine de la spintronique moléculaire. Elle s’intéresse plus précisément aux nouvelles opportunités de façonnage de la polarisation de spin qui découlent de l'hybridation métal ferromagnétique/molécule à l'interface : le nouveau concept de « spinterface ».Dans une première partie nous présentons l’étude de nanojonctions tunnel magnétiques à base de monocouches auto-assemblées (SAMs). Ce système est un des plus prometteur dans l’optique de moduler les propriétés des dispositifs de spintronique par ingénierie chimique, tel un LEGO moléculaire. Nous y présentons la fonctionnalisation de la manganite demi-métallique (La,Sr)MnO3 (LSMO) avec des SAMs d’acides alkylphosphoniques et la fabrication de nanojonctions LSMO/SAMs/Co avec une surface de quelque 10 nm2. Une magnétorésistance de 30% à 50% est observée dans la majorité des dispositifs avec une magnétorésistance tunnel (TMR) jusqu'à 250 % à basse température. Un point remarquable est aussi le comportement très robuste du signal avec la tension: environ 20% de TMR est encore observée au-dessus d’une tension de 1 V. L'influence de la longueur de la chaîne moléculaire a été aussi étudiée et représente un premier pas vers la modulation des dispositifs au niveau moléculaire. Dans une deuxième partie nous présentons l’étude des dispositifs organiques à base de métaux ferromagnétiques à haute TC (température de Curie) et semi-conducteurs organiques. Nous avons réalisé des vannes de spin de Co/Alq3/Co avec des sections de 50 ou 100 µm et fabriquées in-situ par « shadow mask ». Des mesures à température ambiante ont permis d’observer -4% de magnétorésistance (MR) dans une vanne de spin Co/Alq3/Co et +8% MR dans une vanne de spin de Co/MgO/Alq3/Co. Le rôle des deux interfaces sur les propriétés de polarisation de spin des dispositifs est aussi étudié et détaillé. Une forte hybridation métal/molécule dépendant du spin à l'interface inferieure de Co/Alq3, présentant un effet de spinterface (inversion de la polarisation en spin), est observée. Ces études montrent que les effets de spinterface, comme l’inversion de la polarisation de spin, peuvent persister dans un dispositif jusqu’à température ambiante. / This thesis targets the field of molecular spintronics and more particularly the new spin polarization tailoring opportunities, unachievable with inorganic materials, which arise from the ferromagnetic metal/molecule hybridization at the interface.: the new concept of Spinterface.In a first part we investigate Self-Assembled Monolayers (SAMs) based magnetic tunnel nanojunctions. This system appears to be a highly promising candidate to engineer the properties of spintronics devices at the molecular level since SAMs are the equivalent of a molecular LEGO building unit. We present the functionalization of the half-metallic manganite (La,Sr)MnO3 (LSMO) with alkyl phosphonic acids SAMs and the fabrication of LSMO/SAMs/Co magnetic tunnel nanojunctions with an area of few 10 nm2. MR of 30% to 50% is observed in most of the devices, while we report even up to 250% tunnel magnetoresistance (TMR) at low temperature. The most striking point is the robustness of the signal with bias voltage with still 20% TMR observed in the volt range. The influence of the molecular chain length is also investigated and represents a first step towards achieving molecular tailoring.In a second part we develop organic spintronics devices relying on high Curie temperature metallic ferromagnetic electrodes and standard organic semiconductor such as Co/Alq3/Co organic spin valves (OSVs). Junctions have a large area (section of 50 or 100 µm) and are fabricated in-situ by shadow mask. Magnetoresistance (MR) effects at room temperature are investigated with -4% MR observed in Co/Alq3/Co OSVs and +8% MR in Co/MgO/Alq3/Co OSVs. The role of the two interfaces on the spin polarization properties of the devices is also investigated. A stronger spin-dependent hybridization is found to occur at the bottom Co/Alq3 interface inverting the spin polarization on the first molecular layer. The observation of spin polarization inversion at room temperature demonstrates that spinterface effects can strive up to room temperature.

Organic electronic devices are becoming commonplace in many academic and industrial materials laboratories, and commercial application of these technologies is underway. To maximize our fundamental understanding of organic electronics, a wide array of molecular frameworks is necessary, as it allows for a variety of optical and electronic properties to be systematically investigated. With the ability to further tune each individual scaffold via derivatization, access to a broad spectrum of interesting materials is possible. Of particular interest in the search for organic semiconducting materials are the cyclopenta-fused polyaromatic hydrocarbons, including those based on the fully conjugated indenofluorene (IF) system, which is comprised of five structural isomers. This dissertation represents my recent contributions to this area of research. Chapter I serves as a historical perspective on early indenofluorene research and a review of more current research on their synthesis and applications in organic electronic devices. Chapters II and III cover our early work developing the synthesis of the fully-reduced indeno[1,2-b]fluorene scaffold, with the latter of these chapters showing the first example of its application in an organic electronic device, a field effect transistor. Chapter IV demonstrates the first syntheses of fully-reduced indeno[2,1-c]fluorene derivatives. Chapter V expands our research to encompass isoelectronic heteroatomic derivatives of that same scaffold, introducing the fully-reduced diindeno[2,1-b:1',2'-d]thiophene scaffold and showing that our synthetic methodology also can be used to produce a quinoidal thiophene core. Chapter VI concludes with a review of the similarities between the indeno[2,1-c]fluorene and diindeno[2,1-b:1',2'-d]thiophene molecular architectures and introduces benzo[a]indeno[2,1-b]fluorene derivatives, demonstrating the first example of a fully-reduced indenofluorene that possesses a non-quinoidal core, illustrating that the quinoidal core is not a prerequisite for the strong electron affinities seen across the families of fully-reduced indenofluorenes. This dissertation encompasses previously published and unpublished co-authored material. / 2015-10-10

This thesis explores the design, synthesis and characterisation of iridium(III) complexes for optoelectronic applications; in particular, cationic [Ir(CˆN)₂(NˆN)]⁺-type emitters (where CˆN is an anionic bidentate cyclometalating ligand such as 2-phenylpyridinato, ppy, and NˆN is a neutral bidentate ligand such as 2,2'-bipyridine, bpy) for use in light-emitting electrochemical cells (LEECs). Design strategies aim to achieve high photoluminescence quantum yields (Φ[sub](PL)) for these complexes. Chapter 1 provides an overview of the fundamental photophysics of luminescent transition metal complexes, before reviewing state of the art iridium complexes employed in LEEC devices. Chapter 2 employs a combination of the electron-deficient 2,4-difluorophenylpyridine (dFppy) CˆN ligand and various functionalised biimidazole (biim) NˆN ligands. Within the family of different biim ligands the emission energy does not vary significantly, but the excited state kinetics di.er depending on the rigidity of the biim ligand. Combining the lead biim ligand with a sterically bulkier CˆN ligand gives an iridium complex that emits deep blue light with 90% Φ[sub](PL) in MeCN. Chapter 3 describes an approach to replacing the electrochemically unstable aryl carbon-fluorine bonds in dFppy, while maintaining the deep blue emission colour observed for the complexes in Chapter 2. Chapter 4 expands on the concept of rigid biim ligands to bibenzimidazoles (bibenz). Combining conjugated bibenz NˆN ligands with more conjugated CˆN ligands allows for the emission colour of these complexes to be tuned to the orange/red. The Φ[sub](PL) necessarily falls due to the energy gap law, but is nevertheless higher than values measured for reference complexes. Chapter 5 explores the use of an arylazoimidazole ligand with donor-acceptor intraligand charge transfer characteristics in order to red-shift the emission further. The resultant complex is poorly emissive, but shows a panchromic absorption profile and high molar absorptivity, which is unusual for iridium(III) complexes. The absorption profile can be tuned as a function of the protonation state of the imidazole.

This thesis is concerned with study of vibrational dynamics and their effect on charge transport in thin films of organic semiconductors. Two classes of organic semiconductors are investigated- crystalline small molecules and conjugated polymers. Although device performance of both classes of materials has greatly improved over last two decades, detailed understanding of relationship between structure and transport properties is still missing- so far development of organic semiconductors has mostly been based on experimental approach, with theoretical models providing post factum justification rather than guiding rational design of novel compounds. In this thesis I establish methodology to investigate both inter- and intramolecular vibrational modes by combining latest computational techniques with experimental pressure-dependent Raman spectroscopy. The dominant factor limiting charge delocalization in crystalline small molecules are low frequency, large amplitude intermolecular modes. However, theoretical modeling of these modes require use of periodic boundary conditions increasing computational cost by orders of magnitude when compared to commonly used vacuum phase simulations. I report comparative study of two implementations (CRYSTAL09 and CASTEP) of density functional theory (DFT) and dispersion correction (Grimme and Tkatchenko-Scheffler) and evaluate their applicability to predict low frequency vibrational modes in 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) and 2,8-Difl uoro-5,11-bis(triethylsilylethynyl)anthradithiophene (dif-TES-ADT). Charge transport in conjugated polymers is strongly affected by energetic disorder arising from spatial variations in backbone conformation. I combine vacuum phase DFT simulations of intramolecular vibrational modes with pressure-dependent Raman spectroscopy to study planarity and torsional backbone disorder of 2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene (pBTTT), indacenodithiophene-co-benzo-thiadiazole (IDT-BT), diketopyrrolopyrrole-benzotriazole (DPP-BTZ) and naphtalene-bithiophene (NDI-T2) at pressures up to 3.9 GPa. It is shown that Raman spectra of pBTTT and NDI-T2 demonstrate dependence of mode intensities on hydrostatic pressure, whereas spectra of IDT-BT and DPP-BTZ exhibit lack of dependence. Simulations of theoretical spectra performed as a function of backbone torsion indicate that pBTTT undergoes deplanarization of already non-planar backbone and that NDI-T2 backbone is planarized, whereas backbones of IDT-BT and DPP-BTZ are resilient to changes of conformation. Finally, I perform large scale molecular dynamics simulations of crystalline, semi-crystalline and disordered phases of IDT-BT and DPP-BT in order to investigate effect of disorder on backbone conformation. Both compounds were previously reported to exhibit extremely low degree of energetic disorder- I assign this phenomenon to their surprisingly strong resilience to side chain disorder. In both systems simulations demonstrate novel mechanism of disorder accommodation- their backbones bend rather than twist and retain low degree of torsional variation even in amorphous phase.

There has been increasing interest in the development of organic materials due to their unique structural and electronic properties. Organic compounds have the advantage of being able to be deposited from solution, leading to low-cost, high-area electronics production. Contorted polycyclic aromatic hydrocarbons have been shown to have potential for use in organic field-effect transistors (OFETs) and organic photovoltaic devices (OPVs) due to their supramolecular properties and charge carrier mobilities. Thiophene-based materials have also shown great promise in OFETs due to their high charge carrier mobilities, stability during device operation, solubility in organic solvents, and structural versatility. [n]Circulenes are a class of polycyclic aromatic compounds whose shape depends on the central n-membered ring. These range from bowl-shaped when n < 6, planar when n = 6, and saddle-shaped when n > 6. The shapes of these molecules, especially for the contorted circulenes, imparts interesting and useful properties such as a polarizable π-system and coordination to fullerenes. Using methods developed in our group, synthesis of [12]circulene derivatives was attempted. Synthetic difficulties, results, and a synthetic plan to overcome these problems are presented herein. 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) is a thiophene-based p-type semiconducting material with one of the highest reported OFET mobility to date. Alterations to BTBT have been made to improve device processing and tune the electronic structure. However, structural alterations have generally been limited to functionalization with electron-donating groups and extension of the π-system. The lack of electron deficient derivatives has prevented further tuning of the electronic structure. Additionally, installation of strongly electron-withdrawing substituents could give BTBT n-type character as seen with perylene diimides. Several synthetic strategies to develop BTBTs with electron-withdrawing groups were explored. Limitations to developing electron deficient BTBTs as well as synthesis and characterization of novel imide-functionalized derivatives are described.

Classical semiconductor physics has been continuously improving electronic components such as diodes, light-emitting diodes, solar cells and transistors based on highly purified inorganic crystals over the past decades. Organic semiconductors, notably polymeric, are a comparatively young field of research, the first light-emitting diode based on conjugated polymers having been demonstrated in 1990. Polymeric semiconductors are of tremendous interest for high-volume, low-cost manufacturing ("printed electronics"). Due to their rather simple device structure mostly comprising only one or two functional layers, polymeric diodes are much more difficult to optimize compared to small-molecular organic devices. Usually, functions such as charge injection and transport are handled by the same material which thus needs to be highly optimized. The present work contributes to expanding the knowledge on the physical mechanisms determining device performance by analyzing the role of charge injection and transport on device efficiency for blue and white-emitting devices, based on commercially relevant spiro-linked polyfluorene derivatives. It is shown that such polymers can act as very efficient electron conductors and that interface effects such as charge trapping play the key role in determining the overall device efficiency. This work contributes to the knowledge of how charges drift through the polymer layer to finally find neutral emissive trap states and thus allows a quantitative prediction of the emission color of multichromophoric systems, compatible with the observed color shifts upon driving voltage and temperature variation as well as with electrical conditioning effects. In a more methodically oriented part, it is demonstrated that the transient device emission observed upon terminating the driving voltage can be used to monitor the decay of geminately-bound species as well as to determine trapped charge densities. This enables direct comparisons with numerical simulations based on the known properties of charge injection, transport and recombination. The method of charge extraction under linear increasing voltages (CELIV) is investigated in some detail, correcting for errors in the published approach and highlighting the role of non-idealized conditions typically present in experiments. An improved method is suggested to determine the field dependence of charge mobility in a more accurate way. Finally, it is shown that the neglect of charge recombination has led to a misunderstanding of experimental results in terms of a time-dependent mobility relaxation. / Klassische Halbleiterphysik beschäftigt sich bereits seit mehreren Jahrzehnten erfolgreich mit der Weiterentwicklung elektronischer Bauteile wie Dioden, Leuchtdioden, Solarzellen und Transistoren auf der Basis von hochreinen anorganischen Kristallstrukturen. Im Gegensatz hierzu ist das Forschungsgebiet der organischen, insbesondere der polymeren Halbleiter noch recht jung: Die erste Leuchtdiode auf der Basis von "leitfähigem Plastik" wurde erst 1990 demonstriert. Polymere Halbleiter sind hierbei von besonderem Interesse für hochvolumige Anwendungen im Beleuchtungsbereich, da sie sich kostengünstig herstellen und verarbeiten lassen ("gedruckte Elektronik"). Die vereinfachte Herstellung bedingt dabei eine vergleichsweise geringe Komplexität der Bauteilstruktur und verringert die Optimierungsmöglichkeiten. Die vorliegende Arbeit leistet einen Beitrag zum Verständnis der Vorgänge an Grenzflächen und im Volumen von polymeren Leuchtdioden und ermöglicht damit ein besseres Verständnis der Bauteilfunktion. Im Fokus steht hierbei mit einem spiro-verknüpften Polyfluorenderivat ein kommerziell relevanter Polymertyp, der amorphe und hochgradig temperaturstabile Halbleiterschichten bildet. Ausgehend von einer Charakterisierung der Ladungstransporteigenschaften wird im Zusammenspiel mit numerischen Simulationen der Bauteilemission gezeigt, welche Rolle die polymeren und metallenen Kontaktelektroden für die Bauteilfunktion und -effizienz spielen. Des Weiteren wird ein weiß-emittierendes Polymer untersucht, bei dem die Mischung von blauen, grünen und roten Farbstoffen die Emissionsfarbe bestimmt. Hierbei wird das komplexe Wechselspiel aus Energieübertrag zwischen den Farbstoffen und direktem Ladungseinfang aufgeklärt. Es wird ein quantitatives Modell entwickelt, das die beobachtete Verschiebung der Emissionsfarbe unter wechselnden elektrischen Betriebsparametern erklärt und zusätzlich die Vorhersage von Temperatur- und elektrischen Konditionierungseffekten ermöglicht. Ausgehend von leicht messbaren Parametern wie Stromstärken und Emissionsspektren ermöglicht es Rückschlüsse auf mikroskopische Vorgänge wie die Diffusion von Ladungen hin zu Farbstoffen. Es wird gezeigt, dass im Gegensatz zu bisherigen Erkenntnissen der Ladungseinfang durch Drift im elektrischen Feld gegenüber der Diffusion überwiegt. In einem eher methodisch orientierten Teil zeigt die Arbeit, wie die beim Abschalten von Leuchtdioden beobachtbare Emission dazu verwendet werden kann, Erkenntnisse zu Ladungsdichten während der Betriebsphase zu gewinnen. Es wird abschließend nachgewiesen, dass eine gängige Methode zur Bestimmung von Ladungsbeweglichkeiten unter typischen Messbedingungen fehlerbehaftet ist. Ergebnisse, die bisher als eine zeitliche Relaxation der Beweglichkeit in ungeordneten Halbleitern interpretiert wurden, können damit auf die Rekombination von Ladungen während der Messung zurückgeführt werden. Es wird außerdem gezeigt, dass eine Modifikation der bei der Auswertung verwendeten Analytik die genauere Vermessung der Feldstärkeabhängigkeit der Beweglichkeit ermöglicht.

Recent advances in the self-assembly of highly organized structures of organic semiconducting molecules by controlled non-covalent interactions has opened avenues for creating materials with unique optical and electrical properties. The main focus of this thesis lies in the synthesis and self-assembly of n-type perylene based organic semiconducting molecules into highly organized materials. Perylene based molecules used in this study are perylene diimide (PTCDI, two side-chains), perylene mono imide (m-PTCI, one side-chain), perylene tetracarboxylic acid (PTCA, no side-chain) and tetra-alkali metal salts of PTCA (M 4 -PTCA, no side-chain), which are synthesized from the parent perylene tetracarboxylic dianhydride (PTCDA). The self-assembly of these molecules have been performed using solution processing methods (dispersion, phase-transfer, and phase-transfer at high temperature) by taking advantage of the changes in solubility of the molecules, wherein the molecular interactions are maximized to favorably allow for the formation of highly organized structures. Dimension control (1D, 2D and 3D structures) of self-assembly has been obtained for different perylene based molecules by appropriate design of the molecule followed by controlling the conditions of assembly. In case of PTCDI, a new solution processing method phase-transfer at high temperature (2L-HT) allowed for the controlled formation of extremely long and fluorescent 1D structure. For the m-PTCI molecules the organization by the 2L-HT method was found to result in highly organized, single-crystalline, fluorescent 2D sheets. In the case of perylene based molecules with no side-chains two different methods have been developed for the realization of organized 1D nanostructures. The first method utilizes the chemical conversion of a highly soluble PTCA into 1D nanofibers of the parent insoluble perylene tetracarboxylic anhydride. The second method utilizes the assembly of tetra potassium salt of PTCA (K 4 -PTCA) into 1D nanostructures. Furthermore, it has been demonstrated that these 1D nanostructures can be chemically converted to two different chemical species, both of which still retain the 1D morphological characteristic, though with changes in the size. Various functional self-assembled structures developed in this thesis opens up new avenues to explore structure-property-function relationships and their use in applications such as sensors, electronics and opto-electronic devices.