Electronic circuits comprising organic semiconductor thin-films are part of promising technologies for a renewable power generation and an energy-efficient information technology. Whereas TV and mobile phone applications of organic light emitting diodes (OLEDs) got ready for the market awhile ago, organic photovoltaics still lack in power conversion efficiencies, especially in relation to their current fabrication costs. A major reason for the low efficiencies are losses due to the large number of charge carrier traps in organic semiconductors as compared to silicon. It is the aim of this thesis to identify and quantify charge carrier traps in vacuum-deposited organic semiconductor thin-films and comprehend the reasons for the trap formation. For that, the techniques impedance spectroscopy (IS), thermally stimulated currents (TSC), and photoelectron spectroscopy are utilized. In order to assess the absolute energy of charge carrier traps, the charge carrier transport levels are computed for various hole transport materials such as MeO-TPD, pentacene, and ZnPc. Unlike inorganics, organic semiconductors possess in first-order approximation Gaussian distributed densities of states and temperaturedependent transport levels. The latter shift by up to 300 meV towards the energy gap-mid when changing from room temperature to 10 K as it is done for TSC examinations. The frequency-dependent capacitance response of charge carrier traps in organic Schottky diodes of pentacene and ZnPc are studied via impedance spectroscopy. In undoped systems, deep traps with depths of approx. 0.6 eV and densities in the order of 1016...1017 cm−3 are prevailing. For pentacene, the deep trap density is reduced when the material undergoes an additional purification step. Utilizing p-doping, the Fermi level is tuned in a way that deep traps are saturated. Vice versa, the freeze-out of p-doped ZnPc provides further insight into the influence of trap-filling, impurity saturation and reserve on the Fermi level position in organic semiconductors. Furthermore, charge carrier traps are investigated via thermally stimulated currents. It is shown that the trap depths are obtained correctly only if the dispersive transport of the released charge carriers until their extraction is considered. For the first time, the polarity of charge carrier traps in MeO-TPD, ZnPc, and m-MTDATA is identified from TSC’s differences in release time when spacer layers are introduced in the TSC samples. Simultaneously, tiny hole mobilities in the order of 10−13 cm2 Vs−1 are detected for low-temperature thin-films of the hole transporter material Spiro-TTB. It is shown for Spiro-TTB co-evaporated with the acceptor molecule F6-TCNNQ and a p-doped ZnPc:C60 absorber blend that the doping process creates shallow trap levels. Finally, various organic hole transport materials are examined upon their stability in water and oxygen atmosphere during sample fabrication and storage of the organic electronics. In case of pentacene, ZnPc, MeO-TPD, and m-MTDATA, hole traps are already present in unexposed thin-films, which increase in trap density upon oxygen exposure. A global trap level caused by oxygen impurities is found at energies of 4.7...4.8 eV that is detrimental to hole transport in organic semiconductors. / Elektronische Bauelemente aus Dünnschichten organischer Halbleiter sind Teil möglicher Schlüsseltechnologien zur regenerativen Energiegewinnung und energieeffizienten Informationstechnik. Während Fernseh- und Mobilfunkanwendungen organischer Leuchtdioden (OLEDs) bereits vor einiger Zeit Marktreife erlangt haben, ist die organische Photovoltaik (OPV) noch durch zu hohe Fertigungskosten in Relation zu unzureichenden Effizienzen unrentabel. Ein wesentlicher Grund für die niedrigen Wirkungsgrade sind Verluste durch die im Vergleich zu Silizium hohe Zahl an Ladungsträgerfallen in organischen Halbleitern. Ziel dieser Arbeit ist es, mittels Impedanz-Spektroskopie (IS), thermisch stimulierten Strömen (TSC) und Photoelektronenspektroskopie methodenübergreifend Ladungsträgerfallen in vakuumverdampften organischen Dünnschichten zu identifizieren, zu quantifizieren und ihre Ursachen zu ergründen. Um die Energie von Ladungsträgerfallen absolut beziffern zu können, wird zunächst für verschiedene Lochtransportmaterialien wie z.B. MeO-TPD, Pentazen und ZnPc die Transportenergie aus den in erster Ordnung gaußförmigen Zustandsdichten berechnet. Im Gegensatz zu anorganischen Halbleitern ist die Transportenergie in organischen Halbleitern temperaturabhängig. Sie verschiebt sich beim Übergang von Raumtemperatur zu 10 K, wie für TSC Untersuchungen bedeutsam, um bis zu 300 meV in Richtung der Bandlückenmitte. Mittels Impedanz-Spektroskopie wird die frequenzabhängige Kapazitätsantwort von Ladungsträgerfallen in organischen Schottky-Dioden aus Pentazen und ZnPc untersucht. In undotierten Systemen dominieren Defekte mit Tiefen um 0.6 eV, deren Dichte in der Größenordnung von 1016...1017 cm−3 liegt, sich aber im Fall von Pentazen durch einen zusätzlichen Materialaufreinigungsschritt halbieren lässt. Über p-Dotierung wird das Fermi-Level so eingestellt, dass tiefe Fallen abgesättigt werden können. Umgekehrt liefert das Ausfrieren von p-dotiertem ZnPc weitere Belege für den Einfluss von Fallenzuständen, Störstellen-Erschöpfung und Reserve auf das Fermi-Level in dotierten organischen Halbleitern. Im Weiteren werden Ladungsträgerfallen über thermisch stimulierte Ströme untersucht. Es wird gezeigt, dass die Fallentiefen nur dann konsistent bestimmt werden, wenn der dispersive Transport von freigesetzten Ladungsträgern zur Extraktionsstelle berücksichtigt wird. Durch Einführung von ’Abstandshalterschichten’ werden erstmalig über TSC die Polaritäten von Ladungsträgerfallen in MeO-TPD, ZnPc und m-MTDATA per Laufzeitunterschied bestimmt. Gleichzeitig werden geringste Löcherbeweglichkeiten in der Größenordnung von 10−13 cm2 Vs−1 für stark gekühlte Dünnschichten des Lochtransporters Spiro-TTB gemessen. Wie für Spiro-TTB koverdampft mit dem Akzeptormolekül F6-TCNNQ und p-dotierte Mischschichten der Absorbermaterialien ZnPc und C60 gezeigt, erzeugt Dotierung relativ flache Störstellen. Abschließend werden verschiedene organische Lochtransporter-Materialien auf ihre Stabilität in Wasser- und Sauerstoffatmosphären während der Prozessierung und der Lagerung fertiger elektronischer Bauelemente untersucht. Für Pentazen, ZnPc, MeO-TPD und m-MTDATA werden Löcherfallen in intrinsischen Dünnschichten nachgewiesen. Bei Kontakt mit Sauerstoff nimmt deren Defektdichte zu. Es findet sich ein universales Fallenniveau bei rund 4.7...4.8 eV, verursacht durch Sauerstoffverunreinigungen, welches den Lochtransport in organischen Halbleitern limitiert.

Two thienoacene dimers based on the thieno[3,2-b]thiophene moiety were efficiently synthesized, characterized and evaluated as active hole-transporting layers in organic thin-film field-effect transistors. Both compounds behaved as active p-channel organic semi-conductors showing averaged hole mobility of up to 1.33 cm² V⁻¹ s⁻¹.

<p></p><p>Global demand for high performance, low cost, and eco-friendly electronics is ever increasing. Ion/charge transport ability and mechanical adaptability constitute two critical performance metrics of battery and semiconductor materials, which are fundamentally correlated with their structural dynamics under various operating conditions. It is imperative to reach the mechanistic understanding of the structure-property relationships of electronic materials to develop principles of materials design. Nevertheless, the intricate atomic structure and elusive phase behaviors in the operation of devices challenge direct experimental observations. Herein, we employ a spectrum of modeling methods, including quantum chemistry, ab-initio modeling, and molecular dynamics simulation, to systematically study the phase dynamics and physico-mechanical behaviors of multiple electronic materials, ranging from transition-metal cathodes, polymer derived ceramics anodes, to organic semiconductor crystals. The multiscale atomistic modeling enriches the fundamental understanding of the electro-chemo-mechanical behaviors of battery materials, which provides insight on designing state-of-the-art energy materials with high capacity and high structural stability. By leveraging the genetic-algorithm refined molecular modeling and phase transformation theory, we unveil the molecular mechanisms of thermo-, super- and ferroelastic transition in organic semiconductor crystals, thus promoting new avenues of adaptive organic electronics by molecular design. Furthermore, the proposed computational methodologies and theoretical frameworks throughout the thesis can find use in exploring the phase dynamics in a variety of environmentally responsive electronics.</p><p></p>

This work addresses two substantial problems of organic electronic devices: the controllability and adjustability of performance, and the integration using scalable, high resolution patterning techniques for planar thin-film transistors and novel vertical transistor devices. Both problems are of particular importance for the success of transparent and flexible organic electronics in the future. To begin with, the static behavior in molecular doped organic pin-diodes is investigated. This allows to deduce important diode parameters such as the depletion capacitance, the number of active dopant states, and the breakdown field. Applying this knowledge, organic pin-diodes are designed for ultra-high-frequency applications and a cut-off-frequency of up to 1GHz can be achieved using optimized parameters for device geometry, layer thickness, and dopant concentration. The second part of this work is devoted to organic thin-film transistors, high resolution patterning techniques, as well as novel vertical transistor concepts. In particular, fluorine based photo-lithography, a high resolution patterning technique compatible to organic semiconductors, is introduced fielding the integration of organic thin-film transistors under ambient conditions. However, as it will be shown, horizontal organic thin-film transistors are substantially limited in their performance by charge carrier injection. Hence, down-scaling is inappropriate to enlarge the transconductance of such transistors. To overcome this drawback, a novel vertical thin-film transistor concept with a vertical channel length of ∼50nm is realized using fluorine based photo-lithography. These vertical devices can surpass the performance of planar transistors and hence are prospective candidates for future integration in complex electronic circuits.

This work demonstrates an approach to develop low-cost, semi-transparent, long-term stable, and efficient organic photovoltaic (OPV) cells and organic light-emitting diodes (OLEDs) using various alternative electrodes such as conductive polymers, doped ZnO, and carbon nanotubes. Such electrodes are regarded as good candidates to replace the conventional indium tin oxide (ITO) electrode, which is expensive, brittle, and limiting the manufacturing of low-cost, flexible organic devices. First, we report long-term stable, efficient ITO-free OPV cells and transparent OLEDs based on poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) electrodes by using a solvent post-treatment or a structure optimization. In addition, a high performance internal light out-coupling system for white OLEDs based on PEDOT:PSS-coated metal oxide nanostructures is developed. Next, we demonstrate highly efficient ITO-free OPV cells and OLEDs with optimized ZnO electrodes doped with alternative non-metallic elements. The organic devices based on the optimized ZnO electrodes show significantly improved efficiencies compared to devices with standard ITO. Finally, we report semi-transparent OPV cells with free-standing carbon nanotube sheets as transparent top electrodes. The resulting OPV cells exhibit very low leakage currents with good long-term stability. In addition, the combination of various kinds of bottom and top electrodes for semi-transparent and ITO-free OPV cells is investigated. These results demonstrate that alternative electrodes-based OPV cells and OLEDs have a promising future for practical applications in efficient, low-cost, flexible and semi-transparent device manufacturing. / Die vorliegende Arbeit demonstriert einen Ansatz zur Verwirklichung von kostengünstigen, semi-transparenten, langzeitstabilen und effizienten Organischen Photovoltaik Zellen (OPV) und Organischen Leuchtdioden (OLEDs) durch die Nutzung innovativer Elektrodensysteme. Dazu werden leitfähige Polymere, dotiertes ZnO und Kohlenstoff-Nanoröhrchen eingesetzt. Diese alternativen Elektrodensysteme sind vielversprechende Kandidaten, um das konventionell genutzte Indium-Zinn-Oxid (ITO), welches aufgrund seines hohen Preises und spröden Materialverhaltens einen stark begrenz Faktor bei der Herstellung von kostengünstigen, flexiblen, organischen Bauelementen darstellt, zu ersetzten. Zunächst werden langzeitstabile, effiziente, ITO-freie Solarzellen und transparente OLEDs auf der Basis von Poly(3,4-ethylene-dioxythiophene):Poly(styrenesulfonate) (PEDOT:PSS) Elektroden beschrieben, welche mit Hilfe einer Lösungsmittel-Nachprozessierung und einer Optimierung der Bauelementstruktur hergestellt wurden. Zusätzlich wurde ein leistungsfähiges, internes Lichtauskopplungs-System für weiße OLEDs, basierend auf PEDOT:PSS-beschichteten Metalloxid-Nanostrukturen, entwickelt. Weiterhin werden hoch effiziente, ITO-freie OPV Zellen und OLEDs vorgestellt, bei denen mit verschiedenen nicht-metallischen Elementen dotierte ZnO Elektroden zur Anwendung kamen. Die optimierten ZnO Elektroden bieten im Vergleich zu unserem Laborstandard ITO eine signifikant verbesserte Effizienz. Abschließend werden semi-transparente OPV Zellen mit freistehenden Kohlenstoff-Nanoröhrchen als transparente Top-Elektrode vorgestellt. Die daraus resultierenden Zellen zeigen sehr niedrige Leckströme und eine zufriedenstellende Stabilität. In diesem Zusammenhang wurde auch verschiedene Kombinationen von Elektrodenmaterialen als Top- und Bottom-Elektrode für semi-transparente, ITO-freie OPV Zellen untersucht. Zusammengefasst bestätigen die Resultate, dass OPV und OLEDs basierend auf alternativen Elektroden vielversprechende Eigenschaften für die praktische Anwendung in der Herstellung von effizienten, kostengünstigen, flexiblen und semi-transparenten Bauelement besitzen.

Electronic devices made of organic molecules are starting to show their transfomative power in various fields of application today. However, as with most technologies, progress is eventually bounded by how well the inner workings of the components are understood. For electronic devices, as the name suggests, this mostly concerns the behavior of electrons or, more generally, electric charge carriers. To understand and predict device properties, knowledge of the mechanisms that govern the fate of charge carriers is indispensable. In an organic material, those mechanisms are closely related to material properties on a molecular level. Thus, the micro- and macroscale are linked in a complex manner and many questions about these links are still open. This work aims to advance the understanding of three important aspects of the field: the time-evolution of charge carrier states, the mechanism of molecular doping and the efficiency of organic solar cells and photodetectors. All three are strongly affected by a common property of organic materials: disorder. Specifcally, we extend the theoretical framework of describing the time-dependence of charge carrier motion in disordered semiconductors and use it to predict the time-dependence of recombination in organic solar cells. We find that, just as transport, recombination slows down with time, and establish a quantitative method of extracting material characteristics from the measured time-dependence of recombination. To analyze the influence of molecular doping on charge transport, we develop a computational method based on percolation theory. We show that for organic semiconductors, the popular transport energy model can not be used to predict the thermoelectric properties. The latter are important since they are often used to measure the amount of free charges introduced by doping. We are able to accurately model the activation energy of conductivity and study the important length scales and the influence of molecular parameters. Finally, we investigate the consequences of disorder on the performance of solar cells and photodetectors by studying the timescale and efficiency of the separation of photo-generated positive and negative charges. We find that, depending on the conditions, separation can in fact be either enhanced or hindered by disorder effects.

<p>Developing the next generation soft optoelectronic materials is of great importance for achieving high-performance, low-cost electronics. These novel material systems bring about new chemistry, physical phenomena, and exciting properties. Organic inorganic hybrid two-dimensional perovskites and organic stable radical molecules are two exciting material systems that bear high expectation and await extensive exploration.</p> <p>Organic inorganic hybrid two-dimensional perovskites are considered one of the solutions to the pressing instability issue of halide perovskites toward commercialization. Moreover, dimension reduction of perovskites creates new opportunities for using two-dimensional perovskites as thermoelectric applications due to the ultralow thermal conductivity. However, two-dimensional perovskite thermoelectric is still at its’ incipient stage of development, therefore a timely proof of potential is required to draw further research interests.</p> <p>In earlier part of this work, the two-dimensional perovskites featuring π-conjugated ligands are synthesized and optimized for high thermoelectric performance. With material design, device engineering, intensive measurements, and careful data analysis, we successfully showed that two-dimensional perovskites are competitive candidate for the emerging thermoelectric materials. Furthermore, temperature and carrier concentration dependencies on thermoelectric properties were also established, giving future researchers a generalized optimization strategy. </p> <p>Organic stable radical molecules are promising for organic electronics as stable radicals don’t require high conjugation for efficient solids-state charge transport. Thanks to their unique redox capability and the unpaired electrons, organic radicals have many unique electronic and magnetic properties that could be useful in spin-related applications. However, the understanding in charge transport mechanisms as well as structure-to-properties correlation remain shallow.</p> <p>In later part of this work, we achieved the highest recorded long channel electrical conductivity of non-conjugated radicals. Meanwhile, the important role of close packing between radical sites was demonstrated by slightly changing chemical design that resulted in drastic change in electrical conductivity. Finally, we concluded that the solid-state charge transport in non-conjugated species is governed by variable range hopping mechanisms. </p>

Disertační práce je zaměřena na nízkoenergetické konvertory pro zpracování energie. Pro fotovoltaické generátory pracující při nízké úrovní osvětlení byly navrženy konvertory založené na konfiguraci single cell. Pomocí levných výrobních procesů a dostupných materiálů byl navržen a vyroben jednoduchý a spolehlivý termogenerátor. Výrobní postupy využívaly plazmatické aktivace povrchu pomocí výboje s dielektrickou bariérou a modifikované metody depozice PEDOT. Byly navrženy jednoduché a spolehlivé DC/DC měniče pro nízkonapěťové aplikace jako termoelektrické generátory a fotovoltaické články v konfiguraci single cell. Měniče pracují od napětí několika desítek mV a výstupní napětí může být na úrovni několika voltů. Účinnost se blíží 50% a náklady na materiál a výrobu jsou ve srovnání s použitím běžně dostupných integrovaných obvodů pro Energy Harvesting výrazně nižší. Pro řídicí obvody byly použity bipolární tranzistory, které v režimu velmi malých proudů mohou mít napájecí napětí od 0,5 V. Byla ověřena možnost výroby integrovaných obvodů s extrémně nízkým provozním napětím. Tranzistory FET zde pracují v podprahovém režimu a v režimu Bulk-driven.

This work aims at improving the understanding of the fundamental physics behind molecular doping of organic semiconductors, being a requirement for efficient devices like organic light-emitting diodes (OLED) and organic photovoltaic cells (OPV). The underlying physics is studied by electrical conductivity and thermoelectrical Seebeck measurements and the influences of doping concentration and temperature are investigated. Thin doped layers are prepared in vacuum by thermal co-evaporation of host and dopant molecules and measured in-situ. The fullerene C60, known for its high electron mobility, is chosen as host for five different n-dopants. Two strongly ionizing air-sensitive molecules (Cr2(hpp)4 and W2(hpp)4) and three air-stable precursor compounds (AOB, DMBI-POH and o-MeO-DMBI-I) which form the active dopants upon deposition are studied to compare their doping mechanism. High conductivities are achieved, with a maximum of 10.9 S/cm. Investigating the sample degradation by air-exposure, a method for regeneration is proposed, which allows for device processing steps under ambient conditions, greatly enhancing device fabrication possibilities. Various material combinations for p-doping are compared to study the influence of the molecular energy levels of host (MeO-TPD and BF-DPB) and dopant (F6-TCNNQ and C60F36). Corrections for the only estimated literature values for the dopant levels are proposed. Furthermore, the model system of similar-sized host pentacene and dopant F4-TCNQ is studied and compared to theoretical predictions. Finally, a model is developed that allows for estimating charge carrier mobility, density of free charge carriers, doping efficiency, as well as the transport level position from combining conductivity and Seebeck data.:1 Introduction 2 Fundamentals of Organic Semiconductors 2.1 Conventional Semiconductors 2.2 Organic Semiconductors 2.3 Seebeck Effect 2.4 Correlation of Seebeck Coefficient and Charge Carrier Density 3 Experimental 3.1 Seebeck Setup 3.2 Materials 4 Air-Sensitive n-Dopants in C60 4.1 Conductivity 4.2 Thermoelectric Measurements 4.3 Morphology 4.4 Degradation 4.5 Conclusion 5 Air-Stable n-Dopants in C60 5.1 Conductivity 5.2 Thermoelectric Measurements 5.3 Morphology 5.4 Conclusion for AOB and DMBI-POH 5.5 o-MeO-DMBI-I 6 p-Dopants in Amorphous Hosts 6.1 Conductivity 6.2 Thermoelectric Measurements 6.3 Degradation 6.4 Conclusion 7 Pentacene p-Doped by F4-TCNQ 7.1 Conductivity Changes after Preparation 7.2 Relation of Conductivity to Doping Concentration 7.3 Comparison of Seebeck Energy and Activation Energy 7.4 Conclusion 8 Estimating the Doping Efficiency and the Mobility 8.1 Lower Limit of the Mobility 8.2 Lower Limit of the Doping Efficiency 8.3 Conclusions from Seebeck Measurements 8.4 Assuming a Constant Transport Level 8.5 Applying the Models to p-Doped Data 8.6 Conclusion 9 Summary and Outlook 9.1 Summary 9.2 Outlook / Diese Arbeit untersucht organische Halbleiter und den Einfluss von molekularer Dotierung auf deren elektrische Eigenschaften, mit dem Ziel effizientere Bauelemente wie organische Leuchtdioden oder Solarzellen zu ermöglichen. Mittels Leitfähigkeitsuntersuchungen sowie thermoelektrischen Seebeck-Messungen werden die Einflüsse der Dotierkonzentration sowie der Temperatur auf die elektrischen Eigenschaften dünner dotierter Schichten analysiert. Das Abscheiden der Schichten durch Koverdampfen im Vakuum ermöglicht eine in-situ Analyse. Das Fulleren C60, bekannt für besonders hohe Elektronenbeweglichkeit, wird als Wirt für fünf verschieden n-Dotanden, zwei extrem stark ionisierende luftreaktive (Cr2(hpp)4 und W2(hpp)4) sowie drei luftstabile (AOB, DMBI-POH und o-MeO-DMBI-I), verwendet. Dies ermöglicht Schlüsse auf die unterschiedlichen zugrunde liegenden Dotiermechanismen und das Erreichen von Leitfähigkeiten von bis zu 10.9 S/cm. Für einen der luftreaktiven Dotanden wird die Probendegradation an Luft untersucht und eine Regenerationsmethode aufgezeigt, die Prozessierungsschritte in Luft erlaubt und somit entscheidend für zukünftige Bauelementfertigung sein könnte. Verschiedene p-dotierte Materialkombinationen werden untersucht, um den Einfluss der molekularen Energieniveaus von Wirt (MeO-TPD und BF-DPB) und Dotand (F6-TCNNQ und C60F36) auf die Dotierung zu studieren. Dies ermöglicht Schlussfolgerungen auf die in der Literatur bisher nur abgeschätzten Energieniveaus dieser Dotanden. Ferner werden die Eigenschaften des bereits theoretisch modellierten Paares Pentacen und F4-TCNQ mit den Vorhersagen verglichen und die Abweichungen diskutiert. Abschießend wird ein Modell entwickelt, das die Abschätzung von Dotiereffizienz, Ladungsträgerkonzentration, Ladungsträgerbeweglichkeit sowie der Position des Transportniveaus aus Leitfähigkeits- und Seebeck-Messungen erlaubt.:1 Introduction 2 Fundamentals of Organic Semiconductors 2.1 Conventional Semiconductors 2.2 Organic Semiconductors 2.3 Seebeck Effect 2.4 Correlation of Seebeck Coefficient and Charge Carrier Density 3 Experimental 3.1 Seebeck Setup 3.2 Materials 4 Air-Sensitive n-Dopants in C60 4.1 Conductivity 4.2 Thermoelectric Measurements 4.3 Morphology 4.4 Degradation 4.5 Conclusion 5 Air-Stable n-Dopants in C60 5.1 Conductivity 5.2 Thermoelectric Measurements 5.3 Morphology 5.4 Conclusion for AOB and DMBI-POH 5.5 o-MeO-DMBI-I 6 p-Dopants in Amorphous Hosts 6.1 Conductivity 6.2 Thermoelectric Measurements 6.3 Degradation 6.4 Conclusion 7 Pentacene p-Doped by F4-TCNQ 7.1 Conductivity Changes after Preparation 7.2 Relation of Conductivity to Doping Concentration 7.3 Comparison of Seebeck Energy and Activation Energy 7.4 Conclusion 8 Estimating the Doping Efficiency and the Mobility 8.1 Lower Limit of the Mobility 8.2 Lower Limit of the Doping Efficiency 8.3 Conclusions from Seebeck Measurements 8.4 Assuming a Constant Transport Level 8.5 Applying the Models to p-Doped Data 8.6 Conclusion 9 Summary and Outlook 9.1 Summary 9.2 Outlook

<p> In an era of advancing printed electronics, solution-processable organic semiconductors continue to make significant strides in electronic and optoelectronic applications. Electrochromic (EC) technology, which encompass reversible optical modulation under electrochemical biasing, has progressed rapidly over the past half-century and developed into niche commercial-scale devices for auto-tinting glasses as well as low-power, non-emissive displays. To utilize the advantages of organic electrochromic materials in next-generation devices, it is imperative to understand their fundamental material properties, interactions with other device components, and the underlying electrochemistry that governs the overall optical and electrochemical response of the complete electrochromic device. This dissertation presents a discussion on the synergistic role of organic electrochromes, charge-balancing layers and electrolytes in determining two key performance metrics, namely the optical contrast and operational stability, of an electrochromic device (ECD). The absorption features of colored-to-transmissive switching conjugated polymers have been investigated by exploring material design strategies in conjunction with analytical approaches to optimize and enhance the optical contrast. In parallel, transmissive redox-active radical polymer counter electrodes have been developed as compatible charge-balancing layers and integrated into devices by pairing with electrochromic polymers (ECPs) to achieve stable and high-contrast optical modulation. Electrochemical activity of both conjugated and radical polymer electrodes in different ionic and solvent environments have been further examined to understand material-electrolyte interactions governing mixed ionic-electronic conduction. Finally, a small molecular approach to realizing transparent-to-colored electrochromism is discussed, where distinct substituent-induced degradation pathways of conjugated radical cations were revealed. Overall, this research aims to assist future development of robust, ultra-high contrast organic electrochromic platforms.  </p>