Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Le traumatisme crânien (TC) représente un des problèmes majeurs de santé publique, pour lequel à l’heure actuelle il n’existe aucun traitement. Le TC induit une neuro-inflammation délétère qui pourrait contribuer à l’apparition des lésions de la substance blanche (SB). Ces dernières sont à l’origine de lourdes conséquences neurologiques chez les patients victimes de TC. Néanmoins, très peu d’études se sont intéressées à ces lésions bien que plus sévères que les lésions de la substance grise. Ainsi une meilleure connaissance de leur évolution et des causes devient indispensable. L’hyperactivation de la poly(ADP ribose)polymérase (PARP) joue un rôle délétère dans les conséquences post-traumatiques, notamment sur la neuro-inflammation. Ainsi son inhibition pourrait être bénéfique le développement des lésions de la SB. Dans ce contexte, l’objectif de notre travail a été d’évaluer le rôle de la PARP dans les lésions de la SB dans un modèle expérimental de TC induit par impact cortical contrôlé chez la souris. Dans une première partie, nous avons étudié l’évolution de la démyélinisation dans le corps calleux, une structure riche en SB, entre 6 heures et 3 mois post-TC. Parallèlement, les évolutions de la lésion cérébrale, des déficits sensorimoteurs, de la neuro-inflammation et de l’œdème cérébral ont été étudiées. Le TC induit (1) une démyélinisation dès 7 jours et au moins jusqu’à 3 mois post-TC, précédée par (2) une lésion cérébrale entre 24 et 72 heures suivie par une cicatrisation, (3) une neuro-inflammation entre 6 heures et 7 jours et (4) un œdème cérébral entre 6 et 72 heures post-TC. De plus, le TC induit des déficits sensorimoteurs à 6 heures et 3 mois. Ces résultats montrent que ce modèle est adapté pour étudier les lésions de la SB post-TC, et que la neuro-inflammation et l’œdème cérébral pourrait être impliqués dans la démyélinisation. Dans une deuxième partie, nous avons étudié le rôle de la PARP dans les lésions de la SB suite à TC à l’aide de souris knockout (KO) et wild-type (WT) pour le gène de la PARP. Nous avons mis en évidence que les souris KO ne présentent pas de démyélinisation bilatérale du corps calleux après un TC par rapport aux souris WT à 7 jours post-TC, démontrant pour la première fois l’implication de cette enzyme dans les lésions de la SB consécutives à un TC. De plus, nous avons constaté que les souris KO non traumatisées présentent une diminution de myélinisation comparativement aux souris WT non traumatisées, suggérant un rôle de la PARP dans le processus physiologique de la myélinisation.En conclusion, l’ensemble de ce travail expérimental a permis (1) une meilleure caractérisation de la démyélinisation post-TC et des mécanismes potentiellement impliqués dans cette dernière, et (2) de démontrer pour la première fois le rôle délétère de la PARP dans la démyélinisation induite par un TC. Nos travaux suggèrent le potentiel de l’inhibition de la PARP comme stratégie thérapeutique pour la prévention des lésions de la SB post-traumatiques. / Traumatic brain injury (TBI) is a leading cause of death and disability for which there is no neuroprotective treatment up to date. It results in neuroinflammation that may participate in lasting motor and cognitive impairments accompanied by changes in white matter (WM) tracts. WM lesions, evidenced by demyelination, are associated with neurological disorders and in clinical studies are common consequences in patients with chronic TBI. Several studies suggest a contribution of an overactivation of the poly(ADP-ribose) polymerase (PARP) to the neuroinflammatory response which may lead to demyelination. The first part of this study was dedicated to a detailed in vivo assessment of the evolution over time of neurological disorders, cerebral lesion and edema, neuroinflammation and white matter injury induced by controlled cortical impact (CCI) between 6 hours and 12 weeks post-TBI. Notably in the corpus callosum, a significant demyelination starting at 7 days appeared to be a major consequence to post-traumatic neuroinflammation associated with motor dysfunctions. The second part of this study was dedicated to the evaluation of PARP’s role in WM lesions post-TBI, using PARP knockout (KO) mice. Our main findings reveal a diminished demyelination in the corpus callosum of TBI PARP KO as opposed to TBI PARP wildtype specimens. Hence, these data suggest for the first time PARP’s deleterious role in post-traumatic demyelination. In conclusion, taken together these data give an overall view of motor/sensorimotor deficits, neuroinflammation and demyelination in a CCI model of TBI that could help to validate pharmacological strategy for preventing post-traumatic WM injury. Notably, PARP’s inhibition seems to be a valid candidate as this enzyme participates in the establishment of a demyelinating process.

Poly(3,4-ethylendioxythiophen) (PEDOT) ist ein Kunststoff der zur Gruppe der intrinsisch leitfähigen Polymere (ILP) zählt. Aufgrund seiner chemischen und thermischen Stabilität findet er Verwendung in antistatischen Verkleidungen und als Elektrodenmaterial. PEDOT (und andere ILP) zeigen aufgrund ihrer Schaltbarkeit zwischen (reduzierten, ) neutralen und oxidierten Zuständen unterschiedliche Eigenschaften wie Leitfähigkeit, Farbe oder Viskoelastizität. Im Rahmen dieser Arbeit wurden die elektrochemischen und viskoelastischen Eigenschaften von PEDOT-Filmen untersucht. Dabei wurde die Quarzmikrowaage (QCM) in Verbindung mit potentiostatischen (Potentialsprung, PS) und potentiodynamischen (Cyclovoltammetrie, CV) elektrochemischen Methoden verwendet, so dass in situ elektrochemische und mechanische Eigenschaften der Filme zugänglich waren. Zur Bestimmung der viskoelastischen Eigenschaften wurde ein Auswertealgorithmus entwickelt, welcher auf ein mathematisches Modell zur Bestimmung des Schermoduls nach Efimov zurückgreift. Während der Herstellung wurden Parameter wie Lösungsmittel, Leitsalz, Vorpolarisations- und Abscheidungspotential variiert und die erhaltenen Filme bezüglich Schermodul und Morphologie charakterisiert. Es konnte gezeigt werden, dass die Elektrolytzusammensetzung einen entscheidenden Einfluss auf die viskoelastischen Eigenschaften der Filme besitzt, welche mit der Morphologie der Filme korrelieren. Des Weiteren wurden die Änderungen der viskoelastischen Eigenschaften dieser Filme untersucht, welche während dem elektronischen Schalten zwischen neutralem und oxidiertem Zustand aufgrund des Ionenaustausches erfolgen. CV- und PS-Experimente zeigten, dass die viskoelastischen Eigenschaften durch Konzentration und pH-Wert des Elektrolyten beeinflusst werden und in unterschiedlicher Weise auf die Potentialänderungen reagieren. Durch den Einbau von Magnetit-Partikeln in die Schichten konnten Hybridfilme erhalten werden, deren Eigenschaften durch das Anlegen eines äußeren Magnetfeldes beeinflusst werden können. Solche Filme zeigten in einem äußeren Magnetfeld (0,7T) höhere Schermodule und einen stark unterdrückten Ionenaustausch.

Implantable sensors have been extensively investigated to facilitate diagnosis or to provide a means to generated closed loop control of therapy by yielding in vivo measurements of physical and chemical signals. Biodegradable sensors which degrade gradually after they are no longer functionally needed exhibit great potential in acute or shorter-term medical diagnostic and sensing applications due to the advantages of (a) exclusion of the need to a secondary surgery for sensor removal, and (b) reduction of the risk of long-term infection. The objective of this research is to design and characterize microfabricated RF wireless pressure sensors that are made of completely biodegradable materials and degrade at time-controlled manner (in the order of years and months). This was achieved by means of investigation of appropriate biodegradable materials and development of appropriate fabrication processes for these non-standard (Microelectromechanical systems) MEMS materials. Four subareas of research are performed: (1) Design of sensors that operate wirelessly and are made of biodegradable materials. The structure of the wireless sensor consists a very compact and relatively simple design of passive LC resonant circuits embedded in a polymer dielectric package. To design the sensor with a particular resonant frequency range, an electromagnetic model of the sensor and a mechanical model for circular plate are developed. The geometry of the sensor is established based on the analytical and finite element simulations results. (2) Investigation of the biodegradable materials in the application of implantable biodegradable wireless sensors to achieve controllable degradation lifetimes. Commercially available and FDA approved biodegradable polymers poly(L-lactic acid) (PLLA) and a "shell-core" structure of poly(lactic-co-glycolic acid) (PLGA) and polyvinyl alcohol (PVA) are utilized as the dielectric package for slow and rapid degradation sensors, respectively. Biodegradable metallic zinc and zinc/iron couples are chosen as conductor materials. The degradation behavior of Zn and Zn/Fe-couple are investigated in vitro. (3) Development of novel fabrication processes. The process exploit the advantages of MEMS technology in fabricating miniaturized devices, while protecting vulnerable biodegradable materials from the strong and/or hazardous chemicals that are commonly used in conventional MEMS fabrication process. These new processes enable the fabrication of biocompatible and biodegradable 3-D devices with embedded, near-hermetic cavities. (4) Testing the pressure response functionality and studying the degradation behavior of the wireless biodegradable pressure sensors. Both PLLA-based and PLGA/PVA-based sensors are characterized in vitro by being immersed in 0.9% saline for prolonged time. All the sensors exhibit three stages of behavior in vitro: equilibration, functional lifetime, and performance degradation. During the functional lifetime, most sensors exhibit fully stable functionality. The PLLA-based sensors show no significant weight loss within 8 month and are expected to fully degrade after 2 years, while the PLGA/PVA-based sensors can degrade completely within 26 days.

The prevention and treatment of cancer and infectious diseases requires vaccines that can mediate cytotoxic T lymphocyte-based immunity. A promising strategy is protein subunit vaccines composed of purified protein antigens and immunostimulatory adjuvants, such as Toll-like receptor (TLR) agonists. In this research, we developed two new biodegradable polymeric delivery vehicles for protein antigens and TLR agonists, as model vaccine delivery systems. This work was guided by the central hypothesis that an effective vaccine delivery system would have stimulus-responsive degradation and release, biodegradability into excretable non-acidic degradation products, and the ability to incorporate various TLR-inducing adjuvants. The first vaccine delivery system is a cross-linked polyion complex micelle which efficiently encapsulates proteins, DNA, and RNA. The micelle-based delivery system consists of a block copolymer of poly(ethylene glycol) (PEG) and poly(L-lysine), cross-linked by dithiopyridyl side groups to provide transport stability and intracellular release. The second delivery system consists of solid biodegradable microparticles encapsulating proteins, nucleic acids, and hydrophobic compounds. The microparticles are composed of pH-sensitive polyketals, which are a new family of hydrophobic, linear polymers containing backbone ketal linkages. Polyketals are synthesized via a new polymerization method based on the acetal exchange reaction and degrade into non-acidic, excretable degradation products. In addition, the technique of hydrophobic ion pairing was utilized to enhance the encapsulation of ovalbumin, DNA, and RNA in polyketal microparticles via a single emulsion method. Using in vitro and in vivo immunological models, we demonstrated that the micelle- and polyketal-based vaccine delivery systems enhanced the cross-priming of cytotoxic T lymphocytes. The model vaccines were composed of ovalbumin antigen and various TLR-inducing adjuvants including CpG-DNA, monophosphoryl lipid A, and dsRNA. The results demonstrate that the cross-linked micelles and polyketal microparticles have considerable potential as delivery systems for protein-based vaccines.

Made available in DSpace on 2014-12-17T14:07:01Z (GMT). No. of bitstreams: 1 RosanneLFD_DISSERT.pdf: 2030152 bytes, checksum: fac9b7e6c23b892eb3fd86ea5b5f43bc (MD5) Previous issue date: 2011-11-17 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Among the options for plastics modification more convenient, both from a technical-scientific and economic, is the development of polymer blends by processing in the molten state. This work was divide into two stages, with the aim to study the phase morphology of binary blend PMMA / PET blend and this compatibilized by the addition of the poly(methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) copolymer (MMA-GMA-EA). In the first stage is analyzed the morphology of the blend at a preliminary stage where we used the bottle-grade PET in a Haake torque rheometer and the effect of compatibilizer in this blend was evaluated. In the second stage the blend was processed using the recycled PET in a single screw extruder and subsequently injection molding in the shape of specimens for mechanical tests. In both stages we used a transmission electron microscopy (TEM) to observe the morphologies of the samples and an image analyzer to characterize them. In the second stage, as well as analysis by TEM, tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was performed to correlate the morphology with the mechanical properties. The samples used in morphological analyzes were sliced by cryo-ultramicrotomy technique for the analysis by TEM and the analysis by SEM and AFM, we used the flat face of the block after cut cryogenic. It was found that the size of the dispersed phase decreased with the addition of MMA-GMA-EA in blends prepared in a Haake. In the tensile test, the values of maximum tensile strength and modulus of elasticity is maintained in a range between the value of pure PMMA the pure PET, while the elongation at break was influenced by the composition by weight of the PMMA mixture. The coupling agent corroborated the results presented in the blend PMMA / PETrec / MMA-GMA-EA (80/15/5 %w/w), obtained by TEM, AFM and SEM. It was concluded that the techniques used had a good morphologic correlation, and can be confirmed for final analysis of the morphological characteristics of the blends PMMA / PET / Entre as op??es de modifica??o de pl?sticos mais convenientes, tanto do ponto de vista t?cnico-cient?fico como econ?mico, encontra-se o desenvolvimento de blendas polim?ricas por meio de processamento no estado fundido. Este trabalho foi dividido em dois est?gios, tendo como objetivo o estudo da morfologia de fases da blenda bin?ria PMMA/PET e desta compatibilizada pela adi??o do copol?mero poli(metacrilato de metila-co-metacrilato de glicidila-co-acrilato de etila) (MMA-GMA-EA). No primeiro est?gio analisou-se a morfologia da blenda e avaliou-se o efeito do compatibilizante, onde foi usado o PET grau garrafa em um re?metro de torque Haake. J? no segundo est?gio a blenda foi processada empregando desta vez o PET reciclado em uma extrusora monorosca, e posteriormente, moldada por inje??o em forma de corpos de prova para ensaios mec?nicos. Nos dois est?gios utilizou-se a microscopia eletr?nica de transmiss?o (MET) para observar as morfologias das amostras e um analisador de imagens para caracteriz?-las. No segundo estagio, al?m da an?lise por MET, foi realizado ensaio de tra??o, microscopia eletr?nica de varredura (MEV) e microscopia de for?a at?mica (MFA), buscando correlacionar a morfologia com as propriedades mec?nicas. As amostras utilizadas nas an?lises morfol?gicas foram fatiadas por meio da t?cnica crio-ultramicrotomia para na an?lise por MET e para as an?lises por MEV e por MFA, foi utilizada a face plana do tarugo p?s-corte criog?nico. Verificou-se que o tamanho da fase dispersa diminui em fun??o da adi??o do copol?mero MMA-GMA-EA nas blendas preparadas no re?metro Haake. No ensaio de tra??o, os valores de resist?ncia m?xima sob tra??o e m?dulo de elasticidade mantiveram-se em um patamar entre o valor de PMMA puro e do PET puro, enquanto que o alongamento na ruptura mostrou-se influenciada pela composi??o em massa de PMMA na mistura. O agente compatibilizante corroborou nos resultados apresentados da blenda PMMA/PETrec /MMA-MGA-EA (80/15/5), obtidos por MET, MFA e MEV. Concluiu-se que as t?cnicas morfol?gicas utilizadas apresentaram uma boa correla??o e corroboraram para an?lise final das caracter?sticas morfol?gicas das blendas PMMA/PET

Made available in DSpace on 2014-12-17T14:07:12Z (GMT). No. of bitstreams: 1 JucikleciaSR_DISSERT.pdf: 18878091 bytes, checksum: 13af0d90d6b4b0980975e46b7393cd8c (MD5) Previous issue date: 2013-08-23 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / This work studied the immiscible blend of elastomeric poly(methyl methacrylate) (PMMA) with poly(ethylene terephthalate) (PET) bottle grade with and without the use of compatibilizer agent, poly(methyl methacrylate-co-glycidyl methacrylate - co-ethyl acrylate) (MGE). The characterizations of torque rheometry, melt flow index measurement (MFI), measuring the density and the degree of cristallinity by pycnometry, tensile testing, method of work essential fracture (EWF), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were performed in pure polymer and blends PMMA/PET. The rheological results showed evidence of signs of chemical reaction between the epoxy group MGE with the end groups of the PET chains and also to the elastomeric phase of PMMA. The increase in the concentration of PET reduced torque and adding MGE increased the torque of the blend of PMMA/PET. The results of the MFI also show that elastomeric PMMA showed lower flow and thus higher viscosity than PET. In the results of picnometry observed that increasing the percentage of PET resulted in an increase in density and degree crystallinity of the blends PMMA/PET. The tensile test showed that increasing the percentage of PET resulted in an increase in ultimate strength and elastic modulus and decrease in elongation at break. However, in the phase inversion, where the blend showed evidence of a co-continuous morphology and also, with 30% PET dispersed phase and compatibilized with 5% MGE, there were significant results elongation at break compared to elastomeric PMMA. The applicability of the method of essential work of fracture was shown to be possible for most formulations. And it was observed that with increasing elastomeric PMMA in the formulations of the blends there was an improvement in specific amounts of essential work of fracture (We) and a decrease in the values of specific non-essential work of fracture (βWp) / Neste trabalho ? estudada a blenda imisc?vel poli(metacrilato de metila) (PMMA) elastom?rico com poli(tereftalato de etileno) (PET) grau garrafa com e sem o uso do agente compatibilizante, poli(metacrilato de metila-co-metacrilato de glicidilaco- acrilato de etila) (MGE). As caracteriza??es de reometria de torque, medida de ?ndice de fluidez (MFI), determina??o da densidade e do grau de cristalinidade por picnometria, ensaio de tra??o uniaxial, m?todo do trabalho essencial fratura (EWF), microscopia eletr?nica de varredura (MEV) e microscopia eletr?nica de transmiss?o (MET), foram realizadas nos pol?meros puros e nas blendas PMMA/PET. Os resultados reol?gicos apresentaram ind?cios de rea??o qu?mica entre o grupo ep?xi do MGE com os grupos finais de cadeias do PET e, tamb?m, com a fase elastom?rica do PMMA. O aumento na concentra??o de PET reduziu o torque e a adi??o do MGE aumentou o torque da blenda PMMA/PET. Os resultados de MFI mostraram tamb?m que, o PMMA elastom?rico apresentou menor fluidez e, consequentemente, maior viscosidade que o PET. Nos resultados de picnometria observou-se que, o aumento da porcentagem de PET proporcionou um aumento na densidade e no grau de cristalinidade das blendas PMMA/PET. Os ensaios de tra??o mostraram que, o aumento da porcentagem de PET proporcionou um aumento na resist?ncia m?xima e no m?dulo de elasticidade e uma diminui??o no alongamento na ruptura. Entretanto, na invers?o de fase, onde a blenda apresentou ind?cios de uma morfologia cocont?nua e tamb?m, com 30% de fase dispersa PET e compatibilizada com 5% de MGE, verificaram-se resultados expressivos de alongamento na ruptura em rela??o ao PMMA elastom?rico. A aplicabilidade do m?todo do trabalho essencial de fratura mostrou-se poss?vel para a maioria das formula??es. Observou-se ainda que, com o aumento do PMMA elastom?rico nas formula??es das blendas, ocorreu uma melhoria nos valores do trabalho essencial espec?fico de fratura (We) e uma redu??o nos valores do trabalho n?o essencial espec?fico de fratura (βWp)

Nanoscale particles based on the nature of building blocks often self-assemble into superstructures with distinctive spatial arrangements which can be used as functional materials for different application. Micro-phase separated hairy nanoparticle with helical hair can self-assemble to form supramolecular material which may mimic the properties and functions of the natural polymers such as protein and cellulose. Beside this hairy/core-shell nanoparticles also may find many applications such as in asymmetric catalysis, nano-fillers in tire and rubbers, model systems for biology, lithography and as sensors. In this work, we have successfully synthesized two hairy nanoparticles both of which has cross-linked polystyrene core with helical poly (3- methyl 4- vinyl pyridine) and poly (2- methoxystyrene) brushes respectively by living anionic polymerization via one-pot synthesis. NMR spectroscopy was used to determine that polymerization was successful and compositions of HNPs have the agreement with the targeted HNPs structure. By tailoring the architecture (functionalization of polymer chains, the degree of polymerization, grafting density) of HNPs, it is possible to control the final properties of the system. Differential Scanning Calorimetry was used to demonstrate the thermal properties of the synthesized HNPs which corresponds to polymer composition. Dynamic light scattering, SEM and AFM images were recorded to measure the particle size and morphology of the particles. Circular dichroism spectroscopy was used to determine the induced chirality of helical polymer brushes by complexing it with the small chiral molecule. SEM and AFM imaging were recorded to find out the morphology and hierarchically self-assembly of the hairy nanoparticle system. The synthesized particles may have great potential to successfully generate self-assembled suprastructures which can further solve the chiral resolution problem and can also find different applications.

Magister Scientiae - MSc / The main objective of this work was to develop simple and sensitive electrochemical sensors for the detection of bisphenol A. To investigate the electrochemical behavior of BPA on a bare glassy carbon electrode. To apply the developed biosensor for the determination BPA by differential pulse voltammetry, electrochemical impedance spectrometry, square wave voltammetry and steady-state amperometry. To characterize the synthesized PDMA-PSS by cyclic voltammetry (CV), UV-Vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM). / South Africa

Philosophiae Doctor - PhD / In the presented work, immunosensors for detection of Aflatoxin B1 based on different immobilization platforms were studied. Synthesis of an electroactive hydrogel was also carried out. Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. Electrochemical immunosensor for the determination of Aflatoxin B1 (AFB1) was developed with anti-aflatoxin B1 antibody immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of Pt/PANi-PSSA electrode, Pt/PANi-PSSA/AFB1-Ab immunosensor and Pt/PANi-PSSA/AFB1-Ab incubated in BSA were 0.458, 720 and 1066 kΩ, respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron-transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 kΩ for Pt/PANi-PSSA electrode to 1066 kΩ for Pt/PANi-PSSA/AFB1-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB1 immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 kΩL/mg. / South Africa