Ce travail a eu pour objectif l’étude de la dégradation hétérogène d’hydrocarbures aromatiques polycycliques (HAP) et de polybromo diphényles éthers (PBDE) en présence d’oxydants atmosphériques. La réactivité du benzo[a]pyrène et du dibenzo[a,l]pyrène pour les HAP et du BDE 153 (hexabromé) et du BDE 209 (décabromé) pour les PBDE, a été étudiée lorsqu’ils sont adsorbés sur des particules minérales modèles (des particules de silice) et exposés à l’ozone, au dioxyde d’azote ou aux radicaux hydroxyles. L’extraction et l’analyse de ces composés ont été optimisées. Le suivi de l’évolution de la concentration en composé adsorbé en fonction de son temps d’exposition à l’oxydant a permis de déterminer les paramètres cinétiques de chaque composé, pour chaque oxydant. L’influence de la concentration particulaire et de la structure moléculaire sur la réactivité a ainsi été évaluée et débattue. L’identification des produits de réactions majoritaires a été effectuée pour les réactions des HAP avec le dioxyde d’azote et les radicaux hydroxyles et les réactions des PBDE avec les radicaux hydroxyles. Enfin, l’étude de la génotoxicité des extraits de particules pour différents temps d’exposition aux oxydants a été réalisée. Cette étude regroupe une approche cinétique, une approche mécanistique et une approche toxicologique. / This work deals with the heterogeneous degradation of polycyclic aromatic hydrocarbons (PAH) and polybromo diphenyls ethers (PBDE) with various atmospheric oxidants. The reactivity of Benzo[a]pyrene (BaP) and dibenzo[a,l]pyrene (DalP) for PAH and BDE 153 and BDE 209 for PBDE, had been studied when they are adsorbed on a model of mineral particles (silica particles) and exposed to ozone, nitrogen dioxide and hydroxyl radical. Extraction and analyse of compounds were optimised. For all studied reactions, kinetic parameters were obtained following the remaining concentration of compound for different exposure times. Influence of the particle loading and molecular structure on the reactivity had been evaluated and discussed. Identification of the main degradation products was made for the reaction of PAH with nitrogen dioxide and hydroxyl radical and for the reaction of PBDE with hydroxyl radical. Then, the genotoxicity of the particle extracts was made for different exposure times. This study talks about kinetics, mechanistic and genotoxicity.

The scope of this dissertation work is a description of modern methods of reducing exhaust emission in diesel engines. The fundamental part is the application of these methods for diesel engines for off-road use that means for engines that are used in tractors and road machines. The mentioned evidence for the practical utility of the results of this dissertation thesis in practice and their verification on the actual engine are given in the conclusion.

The subject of this thesis is to carry out stress-strain analysis of diesel particulate filter support on tractor. So it describes sequence of steps for the analysis model, such as geometry description, mesh generation, applied forces definition and others. Result of the analysis is assessed in terms of strength and improvement was proposed.

Harmattan and Dust (sand) storms together with anthropogenic activities including the use of firewood and kerosene as fuel for cooking, and diesel/petrol generators for electricity generation are potential sources of particulate and gaseous pollutants in homes in Damaturu town, Nigeria. Other activities like the burning of locally produced incense and mosquito coils as well as the use of aerosol sprays are further possible sources of indoor pollution, which may result in exposure of people to a range of pollutants through inhalation, by ingestion of settled dusts as well as dermal contact. Local people associate occurrence of dust events with adverse health effects and hence there is a need for an understanding of the composition of the settled and airborne dusts in order to assess the possible associated health risks. The first phase of the study involved selection and development of methods of dust sampling and analysis. For validation of the methods employed and to establish a broad understanding of the characteristics of the settled dusts, an initial survey study was conducted involving the application of thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) analysis for organic compound analysis, scanning electron microscopy (SEM), inductively coupled plasma-mass spectrometry (ICP-MS) for analysis of metals, and microbiological analysis. Airborne samples were also collected using sorbent tubes to determine organic compounds in air during activities such as cooking with kerosene, gas, and firewood as well as during electricity generation with fossil fuels. Carbon monoxide (CO) and ultrafine particles (UFPs) monitored simultaneously during some of the household activities. The study involved a novel method of extracting organic chemical emissions from dust by heating of the dusts directly in a micro chamber (μ-CTETM) and collection of emissions on sampling tubes. The method provided a relatively quick way of collecting chemical emissions from dusts that are readily available for release. The sampled tubes were analysed by TD/GC/MS. The conventional solvent extraction of the dusts was also carried out and the extracts were analysed by liquid injection-GC/MS and results of the two methods compared. The study determined a number of constituents (metals, SVOCs, phthalates and physical properties) of dusts collected from households in Damaturu during different weather events and from different indoor/outdoor locations; and compared with some UK samples. The samples investigated include dusts deposited; during two notable dusty-weather events (Harmattan and Storm) as well as when there was no notable dust event; during human activities; and dusts from different types of buildings (modern and traditional homes) as well as inside and outside homes. A standard reference material for organic chemicals (SRM 2585) was also analysed. The physical characterization of the settled house dust samples analysed revealed the various shapes and sizes, and elemental composition of the constituents, which included respirable particles. The microbial analysis also indicated the presence of the spores of a host of fungi and bacterial species; and the possible contributions of household activities to the increased production of pollutants (UFP and CO) ascertained. The μ-CTE extraction of the house dusts by heating with TD/GC/MS analysis of the emissions as well as the solvent extraction-GC/MS revealed the presence of many organic chemical compounds with different analytical retention times and varying concentrations in the dust samples. Chemicals of interest quantified: benzene, hexanal, nonanal, diethyl phthalate (DEP), diisobutylphthalate (DIBP), dibutylphthalate (DBP), and diethylhexylphthalate (DEHP). A host of other chemicals commonly present in the analysed samples identified using the NIST library associated with the MS system software. These chemicals included naphthalene and C10-C16 aliphatic and aromatic hydrocarbons, which would need confirmation by running the pure compound samples. There was an observed higher concentration of the chemicals in the solvent extracts than the μ-CTE extracted dust. The higher concentration of the chemicals in the solvent extracts expected due to the aggressive removal of the chemicals by the organic solvent whereas in the case of thermal extraction only the readily available chemicals (loosely bound to the matrix) released by increases in temperature were removed. Generally, the concentrations of the chemicals found were higher in the indoor than in the outdoor dust samples. In the analysis of the dusts collected during weather events; higher chemical concentrations observed in the samples collected during Harmattan period than the other periods. The Harmattan dust period may pose increased exposures to dust and possible health risks. More exposure is expected to occur in the traditional homes compared with the modern homes due to the higher concentrations of the chemicals in both the indoors and the outdoors and this may be especially important to women and children who spend most of their times at home. Metal analysis involved microwave-assisted digestion of the dust samples followed by ICP-MS analysis. The total quant method of metal analysis for a general profiling indicated the presence of more than 50 elemental contaminants in house dust. The results of the quantitative analysis for six target metals: Cd, Cr, Cu, Ni, Pb, and Zn showed their presence in all indoor and the outdoor dust samples. The mean concentrations showed that the metals were in higher concentrations in the indoor dusts than in the outdoor dusts. The quantitative analysis carried out indicated higher metal contents in the storm dusts than the dusts during the other periods. Results of the dusts collected from modern and traditional homes indicated the presence of the metals in higher concentrations in the dusts from traditional homes than the dusts from the modern homes. The estimated mean concentrations of the metals and phthalates inadvertently ingested as a constituent of dust indicated that some of the pollutants could exceed the tolerable daily intake (TDI) due to high exposures to dust expected to be the case in Damaturu. The results of the investigation of the dust composition, combined with information on exposure to dust and pollutants, show that dusts are a risk to the health of people in the Damataru community. Recommendations are made for more studies to provide a better understanding of dust ingestion and exposure to some phthalates and heavy metals in particular and the possible health risks. To the best of my knowledge, this is the first ever research study of airborne and settled dusts undertaken in North-Eastern Nigeria.

In order to delineate the potential sources and to understand the main controls on the biogeochemical cycling of dissolved and particulate organic matter (DOM, POM) and dissolved inorganic nitrogen (DIN) during estuarine mixing, comprehensive seasonal geochemical and isotopic and surveys across the freshwater-tidal interface were carried out in the Tyne and Tweed Estuaries, NE UK. This study provided a contrast between a relatively pristine system (Tweed) with one that is heavily influenced by anthropogenic activity (Tyne). Geochemical and isotopic (13C, 14C and 15N) analyses demonstrated the predominance of terrigenous organic matter in both these estuaries, with elevated river discharges leading to enhanced terrestrial loading. High pCO2 values in the Tyne (summer) and Tweed (winter) suggested that a significant fraction of this terrestrially-derived organic matter (both DOM and POM pools) is relatively labile and can potentially undergo significant mineralization during estuarine mixing. In both estuaries in situ processing of DIN was relatively minor, with mixing between different sources being the main factor in controlling the distribution of nitrate and ammonium across the salinity gradient. However, anthropogenic ammonium discharges in the Tyne were found to have an enormous direct and indirect impact on estuarine nitrogen cycling. Large, concave removals of terrigenous high molecular weight (HMW) DOC caused by flocculation, biodegradation, and/or photochemical oxidation were associated with a non-conservative 13C-enrichment in d13C signatures. Radiocarbon dates showed an export of young (modern) HMW DOC and old (100-1000s of years), terrigenous POC to the North Sea. 14C-enriched values in coastal North Sea HMW DOC were attributed to anthropogenic discharges originating from within the coastal North Sea environment. In the Tweed, seasonal changes in soil characteristics resulted in an older age for POM during the summer. In the Tyne, decreases in POC% with increasing salinity sometimes coincided with an increase in POC age. This was attributed to mixing with older sediment and to the possible preferential loss of the younger, more labile POC fraction during mineralization. This study has shown that land use patterns, sewage inputs, and freshwater flushing time are the main influences in determining the behaviour and origin of organic matter and DIN entering the coastal North Sea in these two systems.

Physical erosion can mobilise particulate organic carbon (POC) from vegetation and soil, representing an export of primary productivity from ecosystems, and a lateral transfer of carbon recently-derived from the atmosphere. These carbon transfers are thought to be enhanced in mountain forests where erosion rates are high. However, the rates and controls on POC transfer remain poorly constrained, as does the impact of POC export on carbon cycling at regional and global scales. This thesis takes an interdisciplinary approach to address this issue, using remote sensing, river geochemistry, river hydrology, and geomorphic mapping in the Kosñipata Valley, in the Central Andes of Peru. Its main aims are to: 1) estimate stream discharge throughout the year and to evaluate the water balance and sources; 2) quantify the source of riverine POC, accounting for POC derived from sedimentary rocks (POC_fossil) to examine the POC eroded from soils and vegetation (POC_non-fossil); 3) quantify river POC yields; 4) assess the hillslope processes that erode POC; and 5) assess how POC export impacts the carbon balance of mountain forest, and how fluvial transfer impacts the wider carbon cycle. Stream flow was monitored from January 2010 to February 2011 at two newly installed river gauging stations in the Kosñipata Valley at 2250 m (Wayqecha, 48.5 km²) and 1360 m (San Pedro, 164.4 km²). Then annual water balance for the San Pedro catchment was quantified. Rainfall inputs of 3028 mm and cloud water inputs of 308 ± 97 mm were balanced by outputs via stream runoff (2721 mm) and actual evapotranspiration (907 mm), leaving a residual of -294 ± 97 mm (< ~10 % of water inputs). The source of POC in river suspended sediment samples was quantified using radiocarbon (Δ¹⁴C, ‰), stable carbon isotopes, and the nitrogen to carbon ratio. This revealed that river POC_non-fossil was sourced from very young organic carbon in the valley (Δ¹⁴C ~50 ‰) and that POC_fossil comprised 43 % of total POC. Combining the hydrometric measurements with river samples, annual particulate load fluxes were quantified. The vast majority (73 % to 77 %) of the annual suspended sediment transfer and POC (both POC_fossil and POC_non-fossil) occurred in the wet season over a period of 4 months. The suspended sediment yield for the valley (960 – 1200 t km^-2 yr^-1) was consistent with those for the Andean portion of the Madre de Dios River into which the Kosñipata River drains. The river POC_non-fossil yield was 5.2 – 6.9 tC km^-2 yr^-1. Landslides are likely to have played an important role in the mobilisation of POC_non-fossil. A detailed landslide mapping using 25 years of remote sensing data revealed that on average 0.09 % of the valley per year is impacted by this mass-wasting process. These landslides mobilise ~28 tC km^-2 yr^-1 of soil and vegetation valley-wide. The discrepancy between the landslide erosional flux and fluvial POCnon-fossil export suggests an important fraction of the POCnon-fossil harvested by landslides is either exported as coarse debris (not quantified in the fluvial POC_non-fossil flux), remains buried onsite, or is degraded and respired onsite. Landslides also played an important ecosystem function, turning over some sections of the mountain forest within ~625 years, with a 1200 year valley-wide mean. On the basin scale, the Madre de Dios River drains ~ 6 % of the Amazonian Andes. This study enables estimation of the delivery of POC to the lowland Amazon Basin. Using the observation that POC_non-fossil and POC_fossil fluxes were closely linked with suspended sediment transfer, total yields of ~0.22 MtC yr^-1 and ~0.17 MtC yr^-1, respectively, were estimated from this section of the Andes. The export of POC_non-fossil from mountain forests by rivers represents 0.4 – 1.0 % yr^-1 of the net primary productivity of Andean forest and so even if only a small portion of this is buried in sedimentary deposits, it may promote the Andes as a carbon sink. These results demonstrate the long-term influence of erosional processes in the cycling of carbon in the Amazon Basin.

Tobacco smoking has been proved to be harmful to human health and is a known cause of many diseases. It has been shown that not only active smoking can cause health inconveniences - even an exposure to the environmental tobacco smoke (so called secondhand - SHS - or passive smoking) is a serious threat to human health, in some aspects nearly as severe as active smoking. Being aware of these risks, many countries have recently amended their policies which more or less restrict smoking in public places, especially workplaces and hospitality venues. In the Czech Republic, the smoke-free policy belongs to the less strict related to other countries, because it does not restrict smoking at all public places - restaurant and bar owners can choose whether their venue is smoke-free or not and their duty is only to label their venue both outside and inside. The law also enables the option of setting smoking and non-smoking spaces within the restaurant or bar. In a representative sample (over 100) of smoking and non-smoking sections of these restaurants and bars the concentrations of PM2.5, a marker of SHS concentrations, were measured with a photometer. The venues were divided into 3 groups according to the extent of separation of the sections. Parallel to the measurements, the gender composition and smoking...

La pollution atmosphérique est le produit de fortes émissions de polluants (et de leurs précurseurs) et de conditions météorologiques défavorables. Les particules fines (PM2.5) sont l'un des polluants les plus dangereux pour la santé publique. L'exposition répétée ou prolongée à ces particules entraîne chaque année des maladies respiratoires et cardio-vasculaires chez les personnes exposées ainsi que des morts prématurées. L'évolution du climat dans les années à venir aura un impact sur des variables météorologiques (température, vents, précipitations, ...). Ces variables influencent à leur tour divers facteurs, qui affectent la qualité de l'air (émissions, lessivage par les précipitations, équilibre gaz/particule, ...). Si de nombreuses études ont déjà projeté l'effet du changement climatique sur les concentrations d'ozone, peu se sont intéressées à son effet sur les concentrations de particules fines, en particulier à l'échelle du continent européen. C'est ce que cette thèse se propose d'étudier. La circulation atmosphérique de grande échelle est étroitement liée aux variables météorologiques de surface. Par conséquent, il est attendu qu'elle ait également un impact sur les concentrations de PM2.5. Nous utilisons dans cette thèse une approche statistique pour estimer les concentrations futures de PM2.5 à partir d'observations présentes de PM2.5, de quelques variables météorologiques pertinentes et d'outils permettant de représenter cette circulation atmosphérique (régimes et types de temps). Le faible nombre d'observations journalières de PM2.5 et de ses composants en Europe nous a conduit à créer un jeu de données pseudo-observées à l'aide du modèle de qualité de l'air Polyphemus/Polair3D, puis à l'évaluer de façons opérationnelle et dynamique, afin de s'assurer que l'influence des variables météorologiques sur les concentrations de PM2.5 est reproduite de manière satisfaisante par le modèle. Cette évaluation dynamique d'un modèle de qualité de l'air est, à notre connaissance, la première menée à ce jour.Les projections de PM2.5 sur les périodes futures montrent une augmentation systématique des concentrations de PM2.5 au Royaume-Uni, dans le nord de la France, au Benelux et dans les Balkans, et une diminution dans le nord, l'est et le sud-est de l'Europe, en Italie et en Pologne. L'évolution de la fréquence des types de temps ne suffit pas toujours à expliquer l'évolution de ces concentrations entre les périodes historique et futures, car les relations entre circulation atmosphérique de grande échelle et types de temps, entre types de temps et variables météorologiques, et entre variables météorologiques et concentrations de PM2.5 sont amenées à évoluer dans le futur et contribuent à l'évolution des concentrations de PM2.5. L'approche statistique développée dans cette thèse est nouvelle pour l'estimation de l'impact du climat et du changement climatique sur les concentrations de PM2.5 en Europe. Malgré les incertitudes qui y sont associées, cette approche est facilement adaptable à différents modèles et scénarios, ainsi qu'à d'autres régions du monde et d'autres polluants. En utilisant des observations pour définir la relation polluant-météorologie, cette approche serait d'autant plus robuste / Air pollution is the result of high emissions of pollutants (and pollutant precursors) and unfavorable meteorological conditions. Fine particulate matter (PM2.5) is one of the pollutants of great concern for human health. Every year, a repeated or continuous exposure to such particles is responsible for respiratory and cardiovascular diseases among the concerned populations and leads to premature deaths. Climate change is expected to impact meteorological variables (temperature, wind, precipitation,...). Those variables will influence numerous factors, which will affect air quality (emissions, precipitation scavenging, gas/particle equilibrium,...). A large body of studies have already investigated the effects of climate change on ozone, whereas only a few have addressed its effects on PM2.5 concentrations, especially over Europe. This is the subject we investigate in this thesis. Large-scale circulation is closely linked to surface meteorological variables. Therefore, it is expected that it will impact PM2.5 concentrations too. In this thesis, we develop a statistical algorithm to estimate future PM2.5 concentrations from present PM2.5 observations, selected meteorological variables and tools to represent this circulation (weather regimes and weather types). The lack of daily observations of PM2.5 and its components over Europe prevents us to used observations. Consequently, we have created a pseudo-observed PM2.5 data set, by using the Polyphemus/Polair3D air quality Chemical-Transport Model. Both operational and dynamic evaluations were conducted against EMEP measurements, to ensure that the influence of meteorological variables on PM2.5 concentrations is correctly reproduced by the model. As far as we know, this dynamic evaluation of an air quality model with respect to meteorology is the first conducted to date.Future PM2.5 concentrations display an increase over the U.K., northern France, Benelux, and in the Balkans, and a decrease over northern, eastern, and southeastern Europe, Italy, and Poland compared to the historical period. The evolution of weather type frequencies is not sufficient to explain the PM2.5 changes. The relationships between the large-scale circulation and the weather types, between the weather types and meteorological variables, and between meteorological variables and PM2.5 concentrations evolve with future meteorological conditions and also contribute to PM2.5 changes. The statistical method developed in this thesis is a new approach to estimate the impact of climate and climate change on PM2.5 concentrations over Europe. Despite some uncertainties, this approach is easily applicable to different models and scenarios, as well as other geographical regions and other pollutants. Using observations to establish the pollutant-meteorology relationship would make this approach more robust

En raison de leur propriétés spécifiques élevées, par rapports aux alliages légers, les Composites à matrice métallique (CMM) représentent des matériaux d'intérêt pour des applications de haute technologie dans les domaines aéronautique et aérospatiale. Les CMM les plus couramment utilisés sont à renfort particulaire, ou PRMMC, et à matrice Al en raison de leur faible densité. Cette thèse porte sur la mise au point de PRMMC à renfort nanométrique par une voie de synthèse réactive globale. En raison des normes encadrant l’usage des nanomatériaux et visant à limiter l’exposition des usagers et de l’environnement, la manipulation de poudres de taille nanométrique est coûteuse et problématique dans le cadre d’un usage industriel. La nouvelle voie de synthèse qui a été développée dans le cadre de cette thèse a permis de démontrer la faisabilité de composites à matrice métallique et à renfort particulaire nanométrique, dimension moyenne de 30 nm, sans avoir recourt initialement à des poudres de taille nanométrique. Le procédé étudié consiste en une réaction chimique à haute température entre deux matériaux précurseurs qui conduit à la formation in-situ non seulement du renfort mais aussi de la matrice. Par rapport aux techniques de synthèse classiques, cette technique permet de synthétiser des nanoparticules in situ et d’en contrôler la taille. De plus, la matrice et le renfort étant co produits par la réaction à haute température, l’interface entre les deux phases est exempte de couches d’oxydes, ce qui lui assure une très bonne adhésion. Dans le cadre du projet ANR NanoTiCAl, la faisabilité de cette nouvelle méthode a été étudiée à travers le cas d'un composite à matrice aluminium renforcé par des particules de carbure de titane (TiC). Les synthèses ont été réalisées entre 900°C et 1000°C à partir d’un couple de précurseurs incluant le graphite et un aluminiure de titane (Al3Ti). Le composite obtenu, caractérisé par un taux de renfort élevé de 34wt.%, possède un module de Young de 106 GPa, un allongement maximal à la rupture de 6% ainsi qu’une énergie à rupture de l’ordre de 28 J.cm-3. Ces valeurs démontrent un compromis entre résistance et capacité d’endommagement original et particulièrement intéressant, jamais observé dans la littérature pour des composites d’une teneur en renfort aussi importante. La caractérisation fine de la microstructure du composite ainsi que du renfort TiC après extraction du composite massif, ont permis de mieux comprendre les mécanismes à l’oeuvre dans cette voie de synthèse réactive. Enfin, sur la base de la compréhension obtenue dans le cas du composite Al/TiC, des critères ont été identifiés permettant d’aller vers une généralisation de ce procédé de synthèse. La pertinence de cette généralisation a finalement pu être démontrée par quelques mises en application à d’autres systèmes / Metal Matrix Composites (MMCs) have attracted research and industrial attentions as materials for high technological applications in the aeronautic and aerospace industry. The MMCs differ by their high specific mechanical properties compared to light weight alloys. The most commonly used are the Particulate Reinforcement Metal Matrix Composites (PRMMCs), especially the Al based matrices because of their low density.This thesis deals with the reactive synthesis of PRMMCs reinforced by nanoparticles. Because of the standards governing the use of nanomaterials to limit the exposure of users and environment, handling nanoscaled powders is very problematic and expensive in industry. Furthermore, the cost of this kind of processes is very high. This new synthesis route, developed during this thesis, shows the feasibility of PRMMCs reinforced by nanosized particles, with a mean size of 30 nm, without using any starting nanoparticles.The process consists in a chemical reaction at high temperature between precursor materials which leads to form both of the matrix and the reinforcement phase. Compared to conventional synthesis techniques as stir casting, this route allows to synthesis nanoparticles in-situ and to control their size. In addition, the matrix and the reinforcement, which are formed by a reaction at high temperature, have an interface free of oxide layers which assures a good adhesion.In the NanoTiCAl project, the feasibility of this new method is illustrated in the case of an aluminium based composite reinforced by titanium carbide (TiC). The synthesis were realized between 900°C and 1000°C from a couple of precursors including graphite and titanium aluminide (Al3Ti). The resulting composite, characterized by a high reinforcement ratio (34 wt.%), presents a Young’s modulus of 106 GPa, a maximum elongation of 6 % and a high toughness, about 28 J.cm-3. These values represent an uncommon compromise between strength and toughness never seen in the literature regarding to the high content of reinforcement.The characterization of the composite microstructure and of the reinforcement phase, after extraction of the solid composite, allowed a better understanding of the reaction mechanism during the reactive synthesis. Finally, based on our understanding of the Al-TiC composite, criteria have been identified to generalize this synthesis process. This generalization was demonstrated with success in other systems

Le fer et ses composés, notamment les (oxyhydr)oxydes, sont présents dans la nature et produits par les activités anthropiques. Ce caractère ubiquiste du fer et sa sensibilité aux conditions environnementales en fait un excellent traceur de sources et de processus.Cette thèse a pour objectif de tracer l’impact de l’Homme sur les matières en suspension (MES) de la Seine à partir des propriétés magnétiques de sa fraction ferrugineuse en utilisant les outils et méthodes du magnétisme environnemental.Un échantillonnage des MES a permis de couvrir le cours de la Seine et ses affluents durant différents contextes hydrologiques. Des analyses ont été conduites sur ces MES afin de caractériser les particules ferrugineuses magnétiques et d'examiner leurs relations avec les conditions environnementales dans lesquelles elles se sont formées et/ou ont évolué.La magnétite apparait comme l’oxyde dominant et montre une forte affinité avec la fraction fine des MES et ses propriétés magnétiques peuvent être utilisées pour décrire la charge sédimentaire de la Seine et les phénomènes de remise en suspension.Des augmentations de tailles et de concentration de magnétites sont associées à l’urbanisation et aux activités industrielles. Les variations spatiales entre amont et aval des confluences et les variations temporelles montrent que le cours d’eau joue un rôle dans les mécanismes d’accumulation, transport et dilution de ces particules. / Iron and its compounds, in particular iron (hoxyhydr)oxides are ubiquitous in both nature and human activity, and are sensitive to environmental conditions. They can hence be used as environmental source and process tracers.This thesis focuses on tracing the human activities impact in the ferruginous compound of the suspended particulate matter (SPM) in the Seine River (France) using environmental magnetism tools.SPM sampling was conducted along the Seine path and its tributaries during different hydrological contexts. Magnetic properties were measured to characterize the ferruginous magnetic particles and to examine their relationship with the environment in which they have been formed.The main magnetic carrier is magnetite. It is concentrated in the fine sediment fraction and its magnetic properties can be used to trace the sediment load and hydrodynamic processes of the Seine.Increases in concentration and grain size of magnetite particles are associated to urbanization and industrial activities which are sources of anthropogenic particles. Significant variations can be observed between upstream and downstream of confluences and in the temporal scale and can be associated to hydrodynamic processes such as dilution, accretion, transport and re-suspension of the ferruginous particles.