No description available.

<p>This Dissertation aims at establishing an integrated framework of multimodal experiments and multiphysics theory to extend the understanding of the mechanics in electrochemically active materials using organic mixed ionic-electronic conductors (OMIECs) as a model system. </p> <p>OMIECs allow the transport of both ions and electrons, which is accompanied by the (electronic, micro-) structural reorganization. The electronic structural change in OMIECs induces transforms in the electrical conductivity and optical absorbance. The change in molecular packing invites the size change and evolution of mechanical properties. The multiphysics processes render OMIECs a fascinating platform for understanding the multi-physics coupling and advancing organic electrochemical devices. </p> <p>Despite significant progress, there are urgent needs in the experimental techniques and the subsequent mechanical characterization, theoretical understanding of the multiphysics processes, and mechanics-informed design principles for high-performance devices. Specifically, (i) an accurate and straightforward experimental method is in need to better understand the mechanical behaviors and kinetics such as swelling and softening of OMIECs upon electrochemical redox reactions; (ii) a theoretical framework is missing that describes the rich coupled multiphysics processes such as large deformation, charge and mass transport, electrostatics, and phase evolution in OMIECs; (iii) the rational design of the materials and structures based on mechanics principles are required for mechanically reliable, high-performance organic electrochemical devices.</p> <p>In this Dissertation, the mechanics of OMIECs are studied systematically. The basics of OMIECs, knowledge gaps, and the outline are introduced in Chapter 1. The in-situ environmental nanoindentation apparatus and the associating characterization techniques are presented in Chapter 2. In Chapter 3, a theoretical mechanics model is presented that elucidates the interfacial mechanical degradation of thin-film electrodes and outlines the design principles for mechanically reliable electrodes. In Chapter 4, the electrochemical doping kinetics and its stress dependency on conductive polymers are studied via a designed moving front device. Chapter 5 presents a thermodynamically consistent continuum theory of two-phase OMIECs undergoing large deformation, charge and mass transport, electrostatics, and phase separation, which forms the theoretical foundation for such conductive polymer systems. The conclusion and perspectives on future work are presented in Chapter 6. </p>

No description available.

The diffuse-interface phase-field model is a powerful method to simulate and predict mesoscale microstructure evolution in materials using fundamental properties of thermodynamics and kinetics. The objective of this dissertation is to develop phase-field model for simulation and prediction of interdiffusion behavior and evolution of microstructure in multiphase binary and ternary systems under composition and/or temperature gradients. Simulations were carried out with emphasis on multicomponent diffusional interactions in single-phase system, and microstructure evolution in multiphase systems using thermodynamics and kinetics of real systems such as Ni-Al and Ni-Cr-Al. In addition, selected experimental studies were carried out to examine interdiffusion and microstructure evolution in Ni-Cr-Al and Fe-Ni-Al alloys at 1000°C. Based on Onsager’s formalism, a phase-field model was developed for the first time to simulate the diffusion process under an applied temperature gradient (i.e., thermotransport) in single- and two-phase binary alloys. Development of concentration profiles with uphill diffusion and the occurrence of zeroflux planes were studied in single-phase diffusion couples using a regular solution model for a hypothetical ternary system. Zero-flux plane for a component was observed to develop for diffusion couples at the composition that corresponds to the activity of that component in one of the terminal alloys. Morphological evolution of interphase boundary in solid-to-solid two-phase diffusion couples (fcc-γ vs. B2-β) was examined in Ni-Cr-Al system with actual thermodynamic data and concentration dependent chemical mobility. With the instability introduced as a small initial compositional fluctuation at the interphase boundary, the evolution of the interface morphology was found to vary largely as a function of terminal alloys and related composition-dependent chemical mobility. In a binary Ni-Al system, multiphase diffusion couples of fcc-γ vs. L12-γ′, γ vs. γ+γ′ and γ+γ′ vs. γ+γ′ were simulated with alloys of varying compositions and volume fractions of second phase (i.e., γ′). Chemical mobility as a function of composition was employed in the study with constant gradient energy coefficient, and their effects on the final interdiffusion microstructure was examined. Interdiffusion microstructure was characterized by the type of boundaries formed, i.e. Type 0, Type I, and Type II boundaries, following various experimental observations in literature and thermodynamic considerations. Volume fraction profiles of alloy phases present in the diffusion couples were measured to quantitatively analyze the formation or dissolution of phases across the boundaries. Kinetics of dissolution of γ′ phase was found to be a function of interdiffusion coefficients that can vary with composition and temperature. The evolution of interdiffusion microstructures in ternary Ni-Cr-Al solid-to-solid diffusion couples containing fcc-γ and γ+β (fcc+B2) alloys was studied using a 2D phase-field model. Alloys of varying compositions and volume fractions of the second phase (β) were used to simulate the dissolution kinetics of the β phase. Semi-implicit Fourier-spectral method was used to solve the governing equations with chemical mobility as a function of compositions. The simulation results showed that the rate of dissolution of the β phase (i.e., recession of β+γ twophase region) was dependent on the composition of the single-phase γ alloy and the volume fraction of the β phase in the two-phase alloy of the couple. Higher Cr and Al content in the γ alloy and higher volume fraction of β in the γ+β alloy lower the rate of dissolution. Simulated results were found to be in good agreement with the experimental observations in ternary Ni-CrAl solid-to-solid diffusion couples containing γ and γ+β alloys. For the first time, a phase-field model was developed to simulate the diffusion process under an applied temperature gradient (i.e., thermotransport) in multiphase binary alloys. Starting from the phenomenological description of Onsager’s formalism, the field kinetic equations are derived and applied to single-phase and two-phase binary system. Simulation results show that a concentration gradient develops due to preferential movement of atoms towards the cold and hot end of an initially homogeneous single-phase binary alloy subjected to a temperature gradient. The temperature gradient causes the redistribution of both constituents and phases in the two-phase binary alloy. The direction of movement of elements depends on their atomic mobility and heat of transport values.

We introduce a new phase field technique that incorporates the periodic nature of a crystal lattice by considering a free energy functional that is minimized by periodic density fields. This free energy naturally incorporates elastic and plastic deformations and multiple crystal orientations. The new phase field technique can be used to study a host of important phenomena in material processing that involve elastic and plastic effects in phase transformations. This novel phase field approach is used to study elastic and plastic deformation in nanocrystalline materials with a focus on the "reverse" Hall-Petch effect. In addition we apply the method to dendritic solidification in binary alloys and the role of dislocations in spinodal decomposition. / Thesis / Doctor of Philosophy (PhD)

Several aspects of fracture nucleation and growth in brittle porous ceramics and in thin films are investigated, through analytical, numerical modelling, and experimental validation. A mechanical experimental characterization has been developed for a porous ceramic, namely, a 3D apatite, characterised by an oriented porosity and used for biomedical applications. The ceramic is produced from wood, so that the resulting porosity evidences a multi-scale nature, a feature determining peculiar failure mechanisms and an unprecedented porosity/strength ratio. In particular, the material exhibits an exfoliation-type failure, resulting in a progressive loss in mechanical properties, occurring for compression tests parallel to the grains and for highly slender specimens. Similar cohesive-brittle behaviour is also found when the compression is applied in the direction orthogonal to the porous channels, regardless of the shape ratio of the specimen. An in-depth analysis of this response is performed by means of a phase-field model. After calibrating the model, stress-strain curves and fracturing patterns are accurately reproduced. Furthermore, the effects of multi-scale porosity on mechanical behaviour are determined. Various strategies available in the literature for evaluating the properties of porous materials are compared to the proposed phase-field approach. The results open new possibilities for the prediction and characterization of complex fracturing phenomena occurring in highly porous ceramics, so to facilitate medical applications as structural bone repair. An application of the peridynamic theory of continuum mechanics is developed to obtain a dimensional reduced formulation for the characterisation of through-thickness delamination of plates. The kinematic of the plate is carefully chosen to be composed of an absolutely continuous part and a zone where jumps in the displacements are allowed; in this way, the reduced form of the elastic bond-based peridynamic energy and the reduced Lagrangian are explicitly retrieved in a closed-form. The reduction generates a hierarchy of terms, characterizing the energy stored inside the plane element. A semi-analytical solution, obtained by means of a minimization procedure, is obtained for a test case and compared with finite element simulations. Despite the fact that the numerical model is fully three-dimensional (in other words, it is not reduced), this model leads to the same moment-curvature diagrams and nucleation/growth of the delamination surface found with the reduced formulation. Finally, the convergence of the proposed reduced model to local elastic theory at vanishing internal length is determined, so that a reduced-localized cohesive model for fracture is retrieved.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第24890号 / 工博第5170号 / 新制||工||1987(附属図書館) / 京都大学大学院工学研究科機械理工学専攻 / (主査)教授 嶋田 隆広, 教授 平方 寛之, 教授 井上 康博 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

No description available.

No description available.