In this study, a computational approach to the solution of an inverse modeling problem is developed to reconstruct unknown material properties of a Li-ion battery. In-situ MRI measurements performed on a layered graphite electrode during charging are used in comparison with Stefan-Maxwell concentrated electrolyte theory, Butler-Volmer reaction kinetics, and multiphase porous electrode theory to explore the overall accuracy of models for Li transport processes in the active material. In particular, the main research goal here is to determine if the original Cahn-Hilliard formulation for phase-separation can be improved upon through extension to a periodic bilayer model (two-layer Cahn-Hilliard). The original model contains a pair of two stable phases at low and high concentrations that produces the ``shrinking core'' behavior for lithiated graphite. The comparative advantage of the periodic bilayer model stems from the capturing of a third stable phase of intermediate concentration as the average between one concentrated layer and one dilute layer. Calibration is done simultaneously on concentration and cell voltage profiles through multi-objective optimization where the accuracy of a model is assessed based on the quantification of agreement with experimental data. The periodic bilayer model is found to improve upon the least-squares error for fitting of concentration profiles by roughly 20%, while the voltage fittings are too similar to be conclusive. / Thesis / Master of Science (MSc)

This dissertation discusses the polymorphism, crystallization and melting behavior of propylene-ethylene random copolymers. It also discusses the results of studies of the miscibility and the competitive liquid-liquid demixing and crystallization processes in blends of poly(propylene) and poly(1-butene). In the first part of this study, polymorphism of propylene-ethylene copolymers is studied by wide angle X-ray diffraction. By comparing the a and y crystal phase contents in samples with different ethylene content as well as samples isothermally crystallized at different temperatures, it was shown that increasing ethylene content as well as increasing crystallization temperature promotes the formation of the y-phase. Comparison of the results from fractionated samples and unfractionated samples with similar ethylene contents reveals that in propylene-ethylene copolymers with similar micro-structure, the polymorphism, crystallization and melting behavior are mainly determined by their ethylene content. The issue of co-unit inclusion and its effect on crystallization and melting behavior are also discussed. In the second part of this dissertation, the miscibility behavior of atactic - poly(propylene) (at-PP) and atactic poly(1-butene) (ai-P1B) with different molecular weights is investigated by differential scanning calorimetry. The phase diagram of at-PP and at-P1B blend of molecular weight (87K/48.5K) shows a upper critical solution temperature (UCST) behavior. The UCST behavior is consistent with predictions by the group contribution method. Miscibility behavior of high molecular weight isotactic poly(propylene) (it-PP) and isotactic poly(1-butene) (it-P1B) blend is investigated by a combination of optical microscopy and scanning electron microscopy, differential scanning calorimetry and dynamic mechanical analysis. These studies reveal that for the molecular weights investigated, it-PP and it-P1B form blends that are partially miscible in the liquid state. Liquid-liquid demixing is observed by optical microscopy at temperatures above the melting temperature of the it-PP component and is also inferred from scanning electron micrographs of the freeze fracture surface of quenched blends after extraction of the it- P1B component with cyclohexane. It-PP spherulites grow through both liquid phases at relative rates that depend markedly on the crystallization temperature. The complex multiple-melting behavior of the it-PP component in the blend is explained in terms of a bimodal distribution of it-PP lamellar crystals which result from crystal growth in the phase-separated liquid. Finally, the dynamic mechanical analysis data are explained in terms of a liquid-liquid demixing process that results in a significant degree of phase mixing. / Ph. D.

Hot-melt extruded solid dispersion technique is increasingly employed to improve the solubility of poorly water-soluble drugs. The technique relies on the enhanced solubility of the amorphous form of the drug compared to its crystalline counterpart. These systems however are thermodynamically unstable. This means that the drug crystallises with time. Therefore, efforts to measure the stability of these systems over the life span of the product are crucial. This study focused on investigating the use of Hansen Solubility Parameters to quantify polymer-drug interaction and to predict the stability of solid dispersions. This was achieved through a systematic review of hot-melt extruded solid dispersion literature. The study also investigated the use of a combined mechanical and rheological model to characterise the physicochemical and release behaviour of three solid dispersion immediately after preparation and after storage for one month at 40oC or three months at room temperature. Results revealed that the total solubility parameter |ΔбT| was able to predict the stability of the systems for more than 4 months using a cut-off point of 3 MPa-1 with a negative predictive value of 0.9. This was followed by ΔбD with a cut-off point of 1.5 MPa- 1. Moreover, Dynamic Mechanical Analyser and shear rheometry data were shown to be more sensitive than Differential Scanning Calorimetry, Powder X-Ray Diffraction, Scanning Electron Microscope and Fourier Transform Infrared in detecting crystallisation and the interaction between the drug and the polymer. The Dynamic Mechanical Analyser data were consistent with the dissolution behaviour of the samples when comparing the freshly prepared samples with those after storage. The results highlight the need for a unified characterisation approach and the necessity of verifying the homogeneity of mixing during the extrusion process.

Yes / Cocrystals consist of two molecules bonded together in a single crystal lattice giving rise to wide applications including improving solubility of poorly soluble pharmaceuticals. Cocrystallization reaction occurs in the oily phase of liquid–liquid phase separation (LLPS) after it is mixed with coformers. Indomethacin–saccharin cocrystal formation was monitored in situ, and the kinetics of crystallization were determined. The crystallization rates show that the process can be proposed to prevent unwanted oily phase formation during LLPS. / Research Development Fund Publication Prize Award winner, Sep 2022.

Cette thèse décrit comment la morphologie et le polymorphisme de membranes en fluorure de poly(vinylidène) (PVDF) préparées par séparation de phase induite par la vapeur d'eau (VIPS) et par un non-solvant liquide peuvent être ajustés par la température à laquelle le PVDF est dissous (Tdis) pour former la solution de coulée. Les résultats montrent que Tdis présente une transition, notée comme la température de dissolution critique (Tcri), à partir de laquelle la morphologie et le polymorphisme des membranes changent radicalement. Ce phénomène observé pour les trois solvants, N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMAc), and N,M-dimethylformamide (DMF), et les non-solvants (eau et une série d'alcools) utilisés dans cette étude peut être considéré comme général. La cristallisation a lieu avant la démixtion L-L quelle que soit Tdis. Pour une Tdis supérieure à Tcri, les membranes se présentent sous forme de nodules (cristallite forme beta) dont la taille décroît lorsque Tdis diminue. Ce domaine a été dénommé "à grossissement libre" car les chaînes de polymère peuvent cristalliser librement pendant la séparation de phase. Pour une Tdis inférieure à Tcri, des membranes avec une structure bi-continue (cristallite forme alpha) sont obtenues. Ce domaine a été appelé "à grossissement empêché" dans la mesure où la séparation de phase s'accompagne d'une gélification. Nous avons démontré que la morphologie et le polymorphisme cristallin des membranes de PVDF peuvent ainsi être contrôlés par la Tdis et la vitesse d'échange avec le non-solvant. Ces résultats sont interprétés en termes d'auto germination et de compétition entre gélification, cristallisation et démixtion L-L. / This dissertation shows how the morphology and polymorphism of poly(vinylidene fluoride) (PVDF) membranes prepared by using vapor-induced phase separation (VIPS) and liquid-induced phase separation (LIPS) were tuned by varying the dissolution temperature at which PVDF was dissolved (Tdis) to form the casting solution. We observed a transition temperature denoted by critical dissolution temperature, Tcri, across which the morphology and polymorphism of membranes (obtained by VIPS) drastically changed. The phenomenon was considered as general, as a Tcri was observed for all the three solvents N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF) and the non-solvents, water and a series of alcohols, used in the present study. No matter which Tdis we used, polymer crystallization occurred prior to the L-L demixing. With Tdis above Tcri, the prepared membranes were composed of nodules (mainly in beta crystalline form) and the size of polymer domains decreased as the Tdis decreased. Because the polymer chains could freely coarsen to a large domain during the phase separation, we called the system free coarsening. With Tdis below Tcri, membranes with lacy (bi-continuous) structure (mainly in alpha crystalline form) were obtained. Because the polymer solution gelled during the phase separation, we called the system hindered coarsening. It was proven that PVDF membrane morphology and crystalline polymorphs can be monitored by Tdis and the solvent-nonsolvent exchange rate. These results were discussed in terms of self-seeding effect and competition between the gelation, crystallisation and L-L demixing.

Un milieu poreux ou un matériau poreux comprend deux régions interconnectées : une perméable par un gaz ou un liquide et l’autre imperméable. Beaucoup de substances naturelles comme les roches, le sol et les tissus biologiques (par exemple, os, bio-membranes) sont poreuses ainsi que les matériaux manufacturés comme les ciments et les céramiques, etc. Les matériaux poreux ont des applications technologiques importantes et nombreuses, par exemple, comme tamis moléculaires, catalyseurs ou senseurs chimiques. Il existe un nombre très important d’études en expérience et en théorie pour comprendre la structure des matériaux poreux ainsi que les propriétés des substances confinées dans ces matériaux. Dans leur travail de pionnier, Madden et Glandt ont proposé un modèle très simple pour l’adsorption de fluide dans des milieux poreux désordonnés. Dans ce modèle, on forme la matrice en prenant une configuration figée instantanément d’un système à l’équilibre (“quench” en anglais) et puis un fluide est introduit dans une telle matrice. Récemment, T. Patsahan, M. Holovko et W. Dong ont généralisé la “scaled particle theory” (SPT) aux fluides confinés et obtenu ainsi des équations d’état analytiques pour un fluide de sphère dure dans plusieurs modèles de matrice. Dans un premier temps, j’ai développé la version de la SPT pour un mélange de sphères dures additives confiné en milieu poreux. Les expressions pour les valeurs au contact de différentes fonctions de distribution ont été obtenues également. J’ai effectué aussi des simulations de Monte Carlo. Les résultats de ces simulations sont utilisés pour valider les résultats théoriques. Ensuite, j’ai étudié aussi la séparation de phase d’un mélange binaire des sphères dures non additives confiné dans un milieu poreux. Pour obtenir l’équation d’état, nous avons utilisé une théorie de perturbation en prenant un fluide de sphères dures additive comme système de référence. Les résultats donnés par cette théorie sont en bon accord avec les résultats de simulation Monte Carlo. / A porous medium or a porous material (called as frame or matrix also) usually consists of two interconnected rejoins: one permeable by a gas or a liquid, i.e., pore or void, and the other impermeable. Many natural substances such as rocks, soils, biological tissues (e.g., bio membranes, bones), and manmade materials such as cements, foams and ceramics are porous materials. Porous materials have important technological applications such as molecular sieve, catalyst, chemical sensor, etc. In recent years, there have been considerable investigations for understanding thoroughly the structure of these materials as well as the behavior of substances confined in them. Much effort (both experimental and theoretical) has been devoted to the study of porous materials. In their pioneering work, a very simple model for the fluid adsorption in random porous media was proposed by Madden and Glandt. The matrix in Madden-Glandt model is made by quenching an equilibrium system. Then, a fluid is adsorbed in such a matrix. Recently, T. Patsahan, M. Holovko and W. Dong have extended the scaled particle theory (SPT) to confined fluids and derived analytical equations of state (EOS) for a hard sphere (HS) fluid in some matrix models. In this thesis, using SPT method, I obtained the equation of state of additive hard-sphere (AHS) fluid mixtures confined in porous media. The contact values of the fluid-fluid and fluid-matrix radial distribution functions (RDF) were derived as well. The results of the contact values of the RDFs and the chemical potentials of different species were assessed against Monte Carlo simulations. Moreover, I analyzed also the fluid-fluid phase separation of non-additive hard sphere (NAHS) fluid confined in porous media. An equation of state is derived by using a perturbation theory with a multi-component fluid reference. The results of this theory are in good agreement with those obtained from semi grand canonical ensemble Monte Carlo simulations.

The photoactive component of a polymeric organic solar cell can be produced by drying a mixture consisting of a volatile solvent and non-volatile polymers. As the solvent evaporates, the polymers demix and self-assemble into microscale structures, the morphology of which plays a pivotal role in determining the efficiency of the resulting device. Thus, a detailed understanding of the physical mechanisms that drive and influence structure formation in evaporating solvent-polymer mixtures is of high scientific and industrial value. This thesis explores several problems that aim to produce novel insights into the dynamics of evaporating solvent-polymer mixtures. First, the role of compositional Marangoni instabilities in slowly evaporating binary mixtures is studied using the framework of linear stability theory. The analysis is non-trivial because evaporative mass loss naturally leads to a time-dependent base state. In the limit of slow evaporation compared to diffusion, a separation of time scales emerges in the linear stability problem, allowing asymptotic methods to be applied. In particular, an asymptotic solution to linear stability problems that have slowly evolving base states is derived. Using this solution, regions of parameter space where an oscillatory instability occurs are identified and used to formulate appropriate conditions for observing this phenomenon in future experiments. The second topic of this thesis is the use of multiphase fluid models to study the dynamics of evaporating solvent-polymer mixtures. A two-phase model is used to assess the role of compositional buoyancy and to examine the formation of a polymer-rich skin at the free surface. Then, a three-phase model is used to conduct a preliminary investigation of the link between evaporation and phase separation. Finally, this thesis explores the dynamics of a binary mixture that is confined between two horizontal walls using a diffusive phase-field model and its sharp-interface and thin-film approximations. We first determine the conditions under which a homogeneous mixture undergoes phase separation to form a metastable bilayer. We then present a novel mechanism for generating a repeating lateral sequence of alternating A-rich and B-rich domains from this bilayer.

Cette thèse concerne l’étude de phase de séparation de deux polymères thermosensibles connus-poly(N-isopropylacylamide) (PNIPAM) et poly(2-isopropyl-2-oxazoline) (PIPOZ). Parmi des études variées sur ces deux polymères, il y a encore deux parties de leurs propriétés thermiques inexplicites à être étudiées. Une partie concerne l’effet de consolvant de PNIPAM dans l’eau et un autre solvant hydromiscible. L’autre est l’effet de propriétés de groupes terminaux de chaînes sur la séparation de phase de PIPOZ. Pour ce faire, nous avons d’abord étudié l’effet de l’architecture de chaînes sur l’effet de cosolvant de PNIPAMs dans le mélange de méthanol/eau en utilisant un PNIPAM en étoile avec 4 branches et un PNIPAM cyclique comme modèles. Avec PNIPAM en étoile, l’adhérence de branches PNIPAM de à un cœur hydrophobique provoque une réduction de Tc (la température du point de turbidité) et une enthalpie plus faible de la transition de phase. En revanche, la Tc de PNIPAM en étoile dépend de la masse molaire de polymère. La coopérativité de déhydratation diminue pour PNIPAM en étoile et PNIPAM cyclique à cause de la limite topologique. Une étude sur l’influence de concentration en polymère sur l’effet de cosolvant de PNIPAM dans le mélange méthanol/eau a montré qu’une séparation de phase liquide-liquide macroscopique (MLLPS) a lieu pour une solution de PNIPAM dans le mélange méthanol/eau avec la fraction molaire de méthanol entre 0.127 et 0.421 et la concentration en PNIPAM est constante à 10 g.L-1. Après deux jours d’équilibration à température ambiante, la suspension turbide de PNIPAM dans le mélange méthanol/eau se sépare en deux phases dont une phase possède beaucoup plus de PNIPAM que l’autre. Un diagramme de phase qui montre la MLLPS pour le mélange PNIPAM/eau/méthanol a été établi à base de données expérimentales. La taille et la morphologie de gouttelettes dans la phase riche en polymère condensée dépendent de la fraction molaire de méthanol. Parce que la présence de méthanol influence la tension de surface des gouttelettes liquides, un équilibre lent de la séparation de phase pour PNIPAM/eau/méthanol système a été accéléré et une séparation de phase liquide-liquide macroscopique apparait. Afin d’étudier l’effet de groupes terminaux sur les propriétés de solution de PIPOZ, deux PIPOZs téléchéliques avec groupe perfluorodécanyle (FPIPOZ) ou groupe octadécyle (C18PIPOZ) comme extrémités de chaîne ont été synthétisés. Les valeurs de Tc des polymères téléchéliques ont beaucoup diminué par rapport à celle de PIPOZ. Des micelles stables se forment dans des solutions aqueuses de polymères téléchéliques. La micellization et la séparation de phase de ces polymères dans l’eau ont été étudiées. La séparation de phase de PIPOZs téléchéliques suit le mécanisme de MLLPS. Des différences en tailles de gouttelettes formées à l’intérieur de solutions de deux polymères ont été observées. Pour étudier profondément les différences dans le comportement d’association entre deux polymères téléchéliques, les intensités des signaux de polymères correspondants et les temps de relaxation T1, T2 ont été mesurés. Des valeurs de T2 de protons correspondants aux IPOZs sont plus hautes. / This thesis focused on the phase separation of two well-known thermoresponsive polymers, namely PNIPAM (poly(N-isopropylacrylamide)) and PIPOZ (poly(2-isopropyl-2-oxazoline). Despite various studies of the two polymers, two aspects of their thermal properties remained unclear and needed to be investigated. One is the cononsolvency effect of PNIPAM in water and a second water miscible solvent. The other is the effect of the end group properties on the phase separation of PIPOZ. With this in mind, we first studied the effect of the chain architecture on the cononsolvency of PNIPAM in water/methanol mixture, employing a 4-arm star shape PNIPAM and a cyclic PNIPAM as model. Tethering PNIPAM arms to a hydrophobic core resulted in a reduced Tc (cloud point temperature) and a lower phase transition enthalpy change. The Tc of the star shape PNIPAM was inversely dependent on the polymer molecular weight. The dehydration cooperativity was depressed for the star PNIPAM and cyclic PNIPAM due to topological constraints. A study of the effect of polymer concentration on the cononsolvency of PNIPAM in water/methanol mixture revealed a macroscopic liquid-liquid phase separation (MLLPS) for PNIPAM in water/methanol mixtures of methanol molar fraction ranging from 0.127 to 0.421 at a polymer concentration of 10 g·L-1. The turbid suspension of PNIPAM/water/methanol separated into a polymer rich phase coexisting with a polymer poor solution phase after equilibration for two days at room temperature. The phase diagram showing the MLLPS for the PNIPAM/water/methanol mixtures was constructed based on experimental data. The droplets in the condensed polymer rich phase showed a dependence on the methanol molar fraction. Methanol affects the surface tension of the liquid droplets. The slow equilibrium kinetics of PNIPAM phase separation was sped up and a macroscopic liquid-liquid phase separation realized. In order to study the effect of end groups on the solution properties of PIPOZ, two telechelic PIPOZ end capped with perfluorodecanyl groups (FPIPOZ) and octadecyl groups (C18PIPOZ), respectively, were synthesized. The Tc values of the telechelic polymers were greatly reduced after end-functionalization. Stable micelles formed in aqueous solutions of the telechelic polymers. The micellization and phase separation of the telechelic polymers in water were studied. The phase separation of the telechelic PIPOZs in water followed a liquid-liquid phase separation mechanism. Differences in the sizes of droplets formed inside of the two polymer solutions were observed. To further investigate the differences in the association behaviour between the two telechelic polymer, NMR signal intensities and T1 and T2 relaxation times were examined. Higher 1H T2 values were obtained for the IPOZ unit in FPIPOZ than that in C18PIPOZ, indicating a higher mobility of the main chain in the FPIPOZ micelles than that in the C18PIPOZ micelles. Together with the 13C NMR and 19F NMR relaxation studies, we obtained better knowledge of the association properties of the telechelic PIPOZ in water. NMR relaxation studies proved to be efficient way of probing the solution behaviour of the polymers.

Apresentamos um estudo de solidificaçaõ e lixiviacão de matrizes de vidros porosos de alto teor de sílica armazenando 20% em peso de solução aquosa simuladora de rejeitos nucleares de alto nível de radioatividade do tipo Savanah River Labratory. A matriz porosa foi preparada após o tratamento térmico de um vidro de 65% SiO2-27%B2O3-8%Na2O, que sofreu separação de fase à 560°C por 20 horas e lixiviado em HCl - 3N à 90°C. O tamanho dos poros (tipicamente de 100 à 250Å de diâmetro) , foi determinado utilizando o método BET. Após sinterização à 1300°C em ar, as amostras foram caracterizadas física e quimicamente através de testes de lixiviação padronizados MCC1, Soxhlet (MCC5) e Estagnante durante cerca de 28 dias. Determinamos a perda de peso total, o pH, as taxas de lixiviação diferencial e as concentrações acumuladas para os seguintes elementos: Si, Na, B, Ca, Mn, Al, Fe e Ni com técnicas de ICP e espectroscopia de chama para o caso do Na. Os resultados são comparados com os obtidos com vidros borosilicatos de referência, fabricados por fusão convencional (SRL 131, PNL 76-68, MCC 76-68, SRL TDS 131, AVM-Ml à M7), vidros fabricados pela técnica sol-gel (TDS 211), vidros de alto teor de sílica (CU PGM), synroc-D, cerâmicas manufaturadas, concreto FUETAP e matrizes metálicas. Os valores obtidos são similares àqueles obtidos com os melhores vidros borosilicato presentemente usados. / We present a study of the sinterization and of the leaching behavior of a high silica porous glass matrix containing 20 weight % of simulated solution of high level liquid nuclear waste of the type Savanah River Laboratory. The porous matrix has been prepared after heat treatment of a 65% SiO2-27%B2O3-8%Na2O glass, phase separate at 560°C for 20 hours and leached in 3N HCl at 90°C. The pore size (typically 100-250Å in diameter) has been determined by the BET method. After sinterization in air at 1300°C, the samples have been physically and chemically characterized during 28 days using the MCC1, Estagnant and Soxhlet (MCC5) standard tests. We have determined thetotal weight loss, the pH, the diferential leaching rate and the cumulative concentrations for the following elements: Si, Na, B, Ca, Mn, Al, Fe and Ni by ICP technique, for Na flames spectroscopy. The results are compared with these obtained with other reference borosilicate glasses made by conventional fusion techniques (SRL 131, PNL 76-68, MCC 76-68, SRL TDS 131, AVM-M1 to M7), glasses made by sol-gel technique (TDS-211), porous glasses matrix (CU PGM), synroc-D, tailored ceramics, FUETAP concrete and metallic matrix. The values obtained are similar to those found for the best borosilicate glass presently used.

A substituição da água por líquidos iônicos (LI) oferece uma alternativa promissora para o desenvolvimento de processos de separação de gases, principalmente devido à significativa demanda energética em processos convencionais que utilizam soluções aquosas de aminas. Esta proposta apresenta-se interessante por aliar as propriedades dos LI à reatividade de aminas perante o CO2. A físico-química que governa as interações entre os íons dos líquidos iônicos é bastante diversa das encontradas em solventes moleculares, sendo que ainda permanecem muitas questões fundamentais acerca destes materiais. A melhor compreensão das interações estabelecidas entre aminas e LI, e dos produtos formados após a reação com CO2, pode contribuir para o desenvolvimento de processos mais eficazes que permitam a substituição da água nos processos convencionais. O presente trabalho teve como objetivo investigar soluções das aminas primárias propilamina (PA), 2-metoxietilamina (MOEN) e monoetanolamina (MEA) em líquidos iônicos imidazólicos com diferentes ânions: 1-butil-3-metilimidazólio tetrafluoroborato (BMIBF4), hexafluorofosfato (BMIPF6), bis-(trifluorometilsulfonil)imida (BMITFSI) e dicianamida (BMIN(CN)2). Para tal, foram utilizadas as espectroscopias Raman e infravermelho (IR), cujos resultados foram suportados por cálculos baseados na teoria do funcional da densidade (DFT). Os resultados mostram que o modo de estiramento assimétrico do grupo NH2 das aminas, νas(NH2), é o mais adequado para se inferir sobre o grau de agregação das aminas em solventes orgânicos e em LI. No caso das reações das aminas com CO2 nos diferentes LI, o comportamento foi similar à reação com as aminas puras, ou seja, na PA houve cristalização, na MOEN, a formação de um líquido miscível com os LI, e na MEA, a formação de um gel com a subsequente separação de fases. Em particular, no caso da reação entre MEA e CO2 em LI, além da separação de fases, foi observada a diferente solubilidade dos produtos de reação dependendo do LI em questão. Em contraste ao processo convencional que utiliza soluções aquosas de aminas para a captura do CO2, acredita-se que a separação de fases observada em LI seja uma vantagem a ser explorada, já que permitiria um menor gasto energético na recuperação da amina absorvedora, além da recuperação do solvente não volátil / The replacement of water by ionic liquids (IL) offers a promising alternative for the development of gas separation processes, mainly due to the significant energy demand in conventional processes using aqueous solutions of amines. This proposal is exciting because it combines the properties of IL with the reactivity of amines towards CO2. The physical-chemistry that governs the interactions between the ionic liquids ions is quite different from those found in molecular solvents, and many fundamental questions still remain about these materials. A better understanding of the interactions between amines and IL, and the products formed after the reaction with CO2, may contribute to the development of more efficient processes to enable the replacement of water in conventional processes. This study aimed to investigate solutions of the primary amines propylamine (PA), 2-methoxyethylamine (MOEN) and monoethanolamine (MEA) in imidazolium ionic liquids with different anions: 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF4), hexafluorophosphate (BMIPF6), bis (trifluoromethylsulfonyl)imide (BMITFSI) and dicyanamide (BMIN(CN)2). For these purposes, the Raman and infrared (IR) spectroscopies were used, whose results were supported by calculations based on density functional theory (DFT). The results show that the asymmetric stretching mode of the amines group NH2, νas(NH2), are the most suitable for inferring the degree of aggregation of amines in organic solvents and IL. In the case of reactions of amines with CO2 in different IL, the behavior was similar to the reactions with neat amines, that is, it was observed crystallization with PA, the formation of a liquid miscible with IL in MOEN, and the formation of a gel-like product with subsequent phase separation in MEA. In particular, the case of the reaction between MEA and CO2 in IL, in addition to the phase separation, it was observed the different solubility of the reaction products depending on the IL concerned. In contrast to the conventional process using aqueous solutions of amines for the capture of CO2, it is believed that the phase separation observed in IL is an advantage to be exploited, since they allow lower energy consumption in the recovery of the amine absorber, besides the recovery of the non-volatile solvent.