In the practice of solid state chemistry, structural phase transitions are fairly common events. Nonetheless, their understanding, in terms of both: A rationalization of the observed changes in symmetry pattern and; An understanding of the mechanisms allowing for a particular transformation, are outstanding problems. The thermodynamic classification of phase transitions distinguishes between first and second order transitions, on the basis of the discontinuous behavior of quantities related to first or second derivatives of the free energy, respectively. Small atomic displacements are typically associated with second order phase transitions, and latent heat changes amount to a few calories per gram only. Additionally, the symmetries of the phases surrounding the transition are typically in the relation of a group and a subgroup. Reconstructive phase transitions, on the contrary, involve breaking of (large) parts of the bond scaffolding of the initial structure, and exhibit drastic changes at the transition point, with large latent heat and hysteresis effects. The corresponding atomic displacements can be in the order of the lattice parameters, and no group-subgroup is found, between the symmetry of the phases. These type of transitions have generally a strong first-order character. Landau theory accounts for continuous, second-order phase transitions. As a phenomenological theory, it does not establish the existence of a phase transition, which remains an experimental fact. It only bridges microscopic characteristics, like space-group symmetries and structural changes, or phonon softening effects, with measurable macroscopic quantities. Therein, distortions are carried by an order parameter, which fully specifies the form of the analytical variational free energy. The latter is continuous and derivable with respect to temperature, pressure and atomic displacement, at the transition point. First order, non-continuous phase transitions are still within the scope of Landau theory in the mentioned special case of the existence of a group-to-(isotropic) subgroup relationship. In the majority of cases, however, and for the most interesting phase transitions (for basic and applied research), such a relationship is missing, making the choice of an order parameter less straightforward. Most of the allotropic transformations of the elements, many intermetallic systems, and numerous insulating systems belongs to this class. This class also includes most interesting and fundamental electronic effects, like metallization in perovskites or spinel oxides for example. This very simple fact of a missing symmetry condition has helped reinforcing the opinion of first-order phase transitions being a world apart, and possibly contributed to discouraging a firm theory to develop, able to account for their transformation mechanisms and the change of physical properties across phase transition. The thermodynamic distinction between first and second order phase transitions is too narrow, as, in case of first order phase transitions, it embraces both weakly discontinuous transition and reconstructive ones, where bonds are being strongly modified. Especially, a mean to qualify the distance between two structures (geometric, with respect to symmetry, a.s.o.), is missing. Clearly, a group-subgroup relationship may, and typically does imply shortest shifting distances, as a tiny atomic displacement can already do for a symmetry lowering. Naively, missing such a relation means no constraints, and apparently no means to conclude at a connection of two structures in general, let alone a full mechanistic analysis. First order phase transitions proceed by nucleation and subsequent growth of the new phase from the initial one. Different from (second-order) continuous phase transitions, they do imply coexistence of the transforming motifs. The discontinuity in some order parameter between the two phases is driven by lowering of the free energy as the new phase forms. However, close to the transition, the original phase remains metastable, and a fluctuation is needed to cause the formation of the new phase to set in. Such a process responds to thermal changes, and depending on the height of the nucleation barrier, its rate may be slower or faster. In the former case, large deviations from equilibrium may be required to achieve transformation to the stable phase, which means that large hysteresis effects will be observed in the course of transformation. The intent of this work consists in giving a face to the intermediate configurations appearing in first order phase transitions, in solid-solid reconstructive processes. Apart of a mechanistic elucidation, consisting in answering the question “Which atomic displacements bring structural motif A into structural motif B ?”, another purpose of this work is a rather pedagogical one, that is, showing that first-order phase transitions can be understood in detail, not only in principle but in fact. The core of the examples illustrated in this work is concerned with phase transformations where pressure represents the thermodynamic controlling parameter. Pressure is extensively used in chemical synthesis, as a mean to achieve novel properties, optical or mechanical just to mention a few. Additionally, reports on novel high-pressure polymorphs are regularly appearing. In this sense, pressure is a relevant parameter for approaching fundamental questions in solid state chemistry.

This work is focused on the parent compounds of the Fe-chalcogenide superconductors. For this purpose poly- and single-crystalline forms of tetragonal β-FexSe, Fe1+yTe, Fe1+yTe1-xSex and Fe(1+y)-xMxTe (M = Ni, Co) have been prepared. Second focal points of this study are the low-temperature structural phase transitions and physical property changes in tetragonal Fe1+yTe which are induced by composition, external pressure, and cationic substitution.

This work is focused on the parent compounds of the Fe-chalcogenide superconductors. For this purpose poly- and single-crystalline forms of tetragonal β-FexSe, Fe1+yTe, Fe1+yTe1-xSex and Fe(1+y)-xMxTe (M = Ni, Co) have been prepared. Second focal points of this study are the low-temperature structural phase transitions and physical property changes in tetragonal Fe1+yTe which are induced by composition, external pressure, and cationic substitution.

In the practice of solid state chemistry, structural phase transitions are fairly common events. Nonetheless, their understanding, in terms of both: A rationalization of the observed changes in symmetry pattern and; An understanding of the mechanisms allowing for a particular transformation, are outstanding problems. The thermodynamic classification of phase transitions distinguishes between first and second order transitions, on the basis of the discontinuous behavior of quantities related to first or second derivatives of the free energy, respectively. Small atomic displacements are typically associated with second order phase transitions, and latent heat changes amount to a few calories per gram only. Additionally, the symmetries of the phases surrounding the transition are typically in the relation of a group and a subgroup. Reconstructive phase transitions, on the contrary, involve breaking of (large) parts of the bond scaffolding of the initial structure, and exhibit drastic changes at the transition point, with large latent heat and hysteresis effects. The corresponding atomic displacements can be in the order of the lattice parameters, and no group-subgroup is found, between the symmetry of the phases. These type of transitions have generally a strong first-order character. Landau theory accounts for continuous, second-order phase transitions. As a phenomenological theory, it does not establish the existence of a phase transition, which remains an experimental fact. It only bridges microscopic characteristics, like space-group symmetries and structural changes, or phonon softening effects, with measurable macroscopic quantities. Therein, distortions are carried by an order parameter, which fully specifies the form of the analytical variational free energy. The latter is continuous and derivable with respect to temperature, pressure and atomic displacement, at the transition point. First order, non-continuous phase transitions are still within the scope of Landau theory in the mentioned special case of the existence of a group-to-(isotropic) subgroup relationship. In the majority of cases, however, and for the most interesting phase transitions (for basic and applied research), such a relationship is missing, making the choice of an order parameter less straightforward. Most of the allotropic transformations of the elements, many intermetallic systems, and numerous insulating systems belongs to this class. This class also includes most interesting and fundamental electronic effects, like metallization in perovskites or spinel oxides for example. This very simple fact of a missing symmetry condition has helped reinforcing the opinion of first-order phase transitions being a world apart, and possibly contributed to discouraging a firm theory to develop, able to account for their transformation mechanisms and the change of physical properties across phase transition. The thermodynamic distinction between first and second order phase transitions is too narrow, as, in case of first order phase transitions, it embraces both weakly discontinuous transition and reconstructive ones, where bonds are being strongly modified. Especially, a mean to qualify the distance between two structures (geometric, with respect to symmetry, a.s.o.), is missing. Clearly, a group-subgroup relationship may, and typically does imply shortest shifting distances, as a tiny atomic displacement can already do for a symmetry lowering. Naively, missing such a relation means no constraints, and apparently no means to conclude at a connection of two structures in general, let alone a full mechanistic analysis. First order phase transitions proceed by nucleation and subsequent growth of the new phase from the initial one. Different from (second-order) continuous phase transitions, they do imply coexistence of the transforming motifs. The discontinuity in some order parameter between the two phases is driven by lowering of the free energy as the new phase forms. However, close to the transition, the original phase remains metastable, and a fluctuation is needed to cause the formation of the new phase to set in. Such a process responds to thermal changes, and depending on the height of the nucleation barrier, its rate may be slower or faster. In the former case, large deviations from equilibrium may be required to achieve transformation to the stable phase, which means that large hysteresis effects will be observed in the course of transformation. The intent of this work consists in giving a face to the intermediate configurations appearing in first order phase transitions, in solid-solid reconstructive processes. Apart of a mechanistic elucidation, consisting in answering the question “Which atomic displacements bring structural motif A into structural motif B ?”, another purpose of this work is a rather pedagogical one, that is, showing that first-order phase transitions can be understood in detail, not only in principle but in fact. The core of the examples illustrated in this work is concerned with phase transformations where pressure represents the thermodynamic controlling parameter. Pressure is extensively used in chemical synthesis, as a mean to achieve novel properties, optical or mechanical just to mention a few. Additionally, reports on novel high-pressure polymorphs are regularly appearing. In this sense, pressure is a relevant parameter for approaching fundamental questions in solid state chemistry.

In dieser Arbeit wurde in situ TEM genutzt, um Phasendiffusionsprozesse in Echtzeit mit hoher räumlicher Auflösung während struktureller Übergangsphänomene in verschiedenen Systemen zu untersuchen, die durch eine zunehmende Anzahl von Einflussparametern wie Kristallorientierung oder Dehnung charakterisiert sind. Zur Entwicklung und Erprobung der Methode wurde die Interdiffusion an planaren Grenzflächen zwischen (Al,Ga)As-Schichten unterschiedlicher Zusammensetzung während des Glühens untersucht. Ein neuer hybrider Probenpräparationsansatz wurde verwendet, um die Interdiffusion in der Heterostruktur bei Temperaturen bis zu 800 Grad Celsius mit der in situ Weitwinkel-Dunkelfeld-Rastertransmissionselektronenmikroskopie (HAADF STEM) zu untersuchen. Die beobachtete Grenzflächenverbreiterung zeigte eine starke Abhängigkeit der Diffusionskoeffizienten von der lokalen Zusammensetzung von Al und Ga. Als nächstes wurde HAADF STEM verwendet, um die Phasenseparationsbildung von Bi-reichen Clustern in einem Ga(Sb,Bi)-Film direkt zu beobachten. Die Ergebnisse zeigten, dass sie sich durch spinodale Zersetzung bilden. Der komplexeste strukturelle Übergang, der in dieser Arbeit untersucht wurde, ist die Festphasenepitaxie (SPE) von Ge auf Fe3Si, die zur Bildung einer neuartigen epitaktisch stabilisierten FeGe2-Phase führt. Mittels in situ hochauflösendem (HR)TEM konnten die verschiedenen Schritte dieses Phasenübergangs alle in Echtzeit beobachtet werden. Die Ergebnisse zeigten, dass eine intermediäre CsCl-ähnliche Phase von FeGe2 zunächst durch einen diffusionsbegrenzten Prozess Schicht für Schicht von der Ge/Fe3Si-Grenzfläche aus wächst. Nach einer bestimmten Filmdicke wandelt eine zweite Umwandlung den Film in eine tetragonale Schichtstruktur von FeGe2 um. Dieser Prozess beginnt ebenfalls an der Grenzfläche zum FeGe2 und kann auf Gitterdehnung zurückgeführt werden. / In this work, in situ TEM was utilized to investigate phase diffusional processes in real time with high spatial resolution during structural transition phenomena in various systems which are characterized by an increasing number of impact parameters such as crystal orientation or strain. In order to develop and evaluate the experimental method interdiffusion at planar interfaces between (Al,Ga)As layers of different composition during annealing was investigated. A new hybrid sample preparation approach was used to investigate the interdiffusion in the heterostructure at temperatures up to 800 _C with in situ high angle annular dark field scanning transmission electron microscopy (HAADF STEM). The observed interface broadening revealed a strong dependence of the diffusion coefficients on the local composition of Al and Ga. Next in situ HAADF STEM was used to directly observe the phase separation formation of Bi-rich clusters in a Ga(Sb,Bi) film. The results showed that they form by spinodal decomposition. The most complex structural transition investigated in this work is the solid phase epitaxy (SPE) of Ge on Fe3Si resulting in the formation of a novel epitaxially stabilized FeGe2 phase. By using in situ high resolution (HR)TEM the different steps of this phase transition could all be observed in real time. The results showed that an intermediate CsCl-like phase of FeGe2 grows first by a diffusion limited process layer-by-layer from the Ge/Fe3Si interface. After a certain film thickness, a second transformation transforms the film into a tetragonal layered structure of FeGe2. This process also initiates at the interface to the FeGe2 and can be attributed to strain.

In the study of strongly interacting condensed-matter systems controlled microscopic theories hold a key position. Spin-wave theory, large-N expansion, and $epsilon$-expansion are some of the few successful cornerstones. In this doctoral thesis work, we have developed a novel large-$d$ expansion method, $d$ being the spatial dimension, to study model Hamiltonians hosting a quantum phase transition between a paramagnet and a magnetically ordered phase. A highlight of this technique is that it can consistently describe the entire phase diagram of the above mentioned models, including the quantum critical point. Note that most analytical techniques either efficiently describe only one of the phases or suffer from divergences near the critical point. The idea of large-$d$ formalism is that in this limit, non-local fluctuations become unimportant and that a suitable product state delivers exact expectation values for local observables, with corrections being suppressed in powers of $1/d$. It turns out that, due to momentum summation properties of the interaction structure factor, all diagrams are suppressed in powers of $1/d$ leading to an analytic expansion. We have demonstrated this method in two important systems namely, the coupled-dimer magnets and the transverse-field Ising model. Coupled-dimer magnets are Heisenberg spin systems with two spins, coupled by intra-dimer antiferromagnetic interaction, per crystallographic unit cell (dimer). In turn, spins from neighboring dimers interact via some inter-dimer interaction. A quantum paramagnet is realized for a dominant intra-dimer interaction, while a magnetically ordered phase exists for a dominant (or of the same order as intra-dimer interaction) inter-dimer interaction. These two phases are connected by a quantum phase transition, which is in the Heisenberg O(3) universality class. Microscopic analytical theories to study such systems have been restricted to either only one of the phases or involve uncontrolled approximations. Using a non-linear bond-operator theory for spins with S=$1/2$, we have calculated the $1/d$ expansion of static and dynamic observables for coupled dimers on a hypercubic lattice at zero temperature. Analyticity of the $1/d$ expansion, even at the critical point, is ensured by correctly identifying suitable observables using the mean-field critical exponents. This method yields gapless excitation modes in the continuous symmetry broken phase, as required by Goldstone\'s theorem. In appropriate limits, our results match with perturbation expansion in small ratio of inter-dimer and intra-dimer coupling, performed using continuous unitary transformations, as well as the spin-wave theory for spin-$1/2$ in arbitrary dimensions. We also discuss the Brueckner approach, which relies on small quasiparticle density, and derive the same $1/d$ expansion for the dispersion relation in the disordered phase. Another success of our work is in describing the amplitude (Higgs) mode in coupled-dimer magnets. Our novel method establishes the popular bond-operator theory as a controlled approach. In $d=2$, the results from our calculations are in qualitative agreement with the quantum Monte Carlo study of the square-lattice bilayer Heisenberg AF spin-$1/2$ model. In particular, our results are useful to identify the amplitude (Higgs) mode in the QMC data. The ideas of large-$d$ are also successfully applied to the transverse-field Ising model on a hypercubic lattice. Similar to bond operators, we have introduced auxiliary Bosonsic operators to set up our method in this case. We have also discussed briefly the bilayer Kitaev model, constructed by antiferromagnetically coupling two layers of the Kitaev model on a honeycomb lattice. In this case, we investigate the dimer quantum paramagnetic phase, realized in the strong inter-layer coupling limit. Using bond-operator theory, we calculate the mode dispersion in this phase, within the harmonic approximation. We also conjecture a zero-temperature phase diagram for this model.

Complex networks are employed as a mathematical description of complex systems in many different fields, ranging from biology to sociology, economy and ecology. Dynamical processes in these systems often display phase transitions, where the dynamics of the system changes qualitatively. In combination with these phase transitions certain components of the system might irretrievably go extinct. In this case, we talk about absorbing transitions. Developing mathematical tools, which allow for an analysis and prediction of the observed phase transitions is crucial for the investigation of complex networks. In this thesis, we investigate absorbing transitions in dynamical networks, where a certain amount of diversity is lost. In some real-world examples, e.g. in the evolution of human societies or of ecological systems, it is desirable to maintain a high degree of diversity, whereas in others, e.g. in epidemic spreading, the diversity of diseases is worthwhile to confine. An understanding of the underlying mechanisms for emergence and persistence of diversity in complex systems is therefore essential. Within the scope of two different network models, we develop an analytical approach, which can be used to estimate the prerequisites for diversity. In the first part, we study a model for opinion formation in human societies. In this model, regimes of low diversity and regimes of high diversity are separated by a fragmentation transition, where the network breaks into disconnected components, corresponding to different opinions. We propose an approach for the estimation of the fragmentation point. The approach is based on a linear stability analysis of the fragmented state close to the phase transition and yields much more accurate results compared to conventional methods. In the second part, we study a model for the formation of complex food webs. We calculate and analyze coexistence conditions for several types of species in ecological communities. To this aim, we employ an approach which involves an iterative stability analysis of the equilibrium with respect to the arrival of a new species. The proposed formalism allows for a direct calculation of coexistence ranges and thus facilitates a systematic analysis of persistence conditions for food webs. In summary, we present a general mathematical framework for the calculation of absorbing phase transitions in complex networks, which is based on concepts from percolation theory. While the specific implementation of the formalism differs from model to model, the basic principle remains applicable to a wide range of different models.

No description available.

No description available.

In processing and data storage mainly ferromagnetic (FM) materials are being used. Approaching physical limits, new concepts have to be found for faster, smaller switches, for higher data densities and more energy efficiency. Some of the discussed new concepts involve the material classes of correlated oxides and materials with antiferromagnetic coupling. Their applicability depends critically on their switching behavior, i.e., how fast and how energy efficient material properties can be manipulated. This thesis presents investigations of ultrafast non-equilibrium phase transitions on such new materials. In transition metal oxides (TMOs) the coupling of different degrees of freedom and resulting low energy excitation spectrum often result in spectacular changes of macroscopic properties (colossal magneto resistance, superconductivity, metal-to-insulator transitions) often accompanied by nanoscale order of spins, charges, orbital occupation and by lattice distortions, which make these material attractive. Magnetite served as a prototype for functional TMOs showing a metal-to-insulator-transition (MIT) at T = 123 K. By probing the charge and orbital order as well as the structure after an optical excitation we found that the electronic order and the structural distortion, characteristics of the insulating phase in thermal equilibrium, are destroyed within the experimental resolution of 300 fs. The MIT itself occurs on a 1.5 ps timescale. It shows that MITs in functional materials are several thousand times faster than switching processes in semiconductors. Recently ferrimagnetic and antiferromagnetic (AFM) materials have become interesting. It was shown in ferrimagnetic GdFeCo, that the transfer of angular momentum between two opposed FM subsystems with different time constants leads to a switching of the magnetization after laser pulse excitation. In addition it was theoretically predicted that demagnetization dynamics in AFM should occur faster than in FM materials as no net angular momentum has to be transferred out of the spin system. We investigated two different AFM materials in order to learn more about their ultrafast dynamics. In Ho, a metallic AFM below T ≈ 130 K, we found that the AFM Ho can not only be faster but also ten times more energy efficiently destroyed as order in FM comparable metals. In EuTe, an AFM semiconductor below T ≈ 10 K, we compared the loss of magnetization and laser-induced structural distortion in one and the same experiment. Our experiment shows that they are effectively disentangled. An exception is an ultrafast release of lattice dynamics, which we assign to the release of magnetostriction. The results presented here were obtained with time-resolved resonant soft x-ray diffraction at the Femtoslicing source of the Helmholtz-Zentrum Berlin and at the free-electron laser in Stanford (LCLS). In addition the development and setup of a new UHV-diffractometer for these experiments will be reported. / In der Datenspeichertechnologie werden bisher hauptsächlich ferromagnetische Materialien eingesetzt. Da mit diesen aber physikalische Grenzen erreicht werden, werden neue Konzepte gesucht, um schnellere und kleinere Schalter, größere Datendichten und eine höherere Energieeffizienz zu erzeugen. Unter den diskutierten Materialklassen finden sich komplexen Übergangsmetalloxide und Materialien mit antiferromagnetischer Kopplung. Die Anwendbarkeit solcher Materialien hängt stark davon ab, wie schnell sich deren Eigenschaften verändern lassen und wieviel Energie dafür eingesetzt werden muss. Die vorliegende Arbeit beschäftigt sich mit ultraschnellen, Nicht-Gleichgewicht-Phasenübergängen genau in solchen Materialien. In Übergangsmetalloxiden führt die enge Kopplung zwischen den unterschiedlichen Freiheitsgraden zu einem effektiven niederenergetischen Anregungsspektrum. Diese Anregungen sind oft verknüpft mit spektakulären makroskopischen Eigenschaften, wie z.B. dem kolossalen Magnetowiderstand, Hochtemperatur-Supraleitung, Metall- Isolator-Übergang, die oft von nanoskaliger Ordnung von Spins, Ladungen, orbitaler Besetzung sowie Gitterverzerrungen begleitet sind. Dadurch werden diese Materialien interessant für Anwendbarkeit. Magnetit, ein Prototyp eines solchen funktionalen Materials zeigt einen Metall-Isolator-Übergang bei T = 123 K. Untersucht man die Ladungs- und orbitale Ordnung sowie die Struktur nach einer optischen Anregung, so findet man, dass die elektronische Struktur und Gitterverzerrung, die kennzeichnend für die Tieftemperaturphase sind, innerhalb der Zeitauflösung des Experiments von 300 fs zerstört wird. Der eigentliche Metall-Isolator-Übergang zeigt sich erst nach 1.5 ps. Die Ergebnisse zeigen, dass MITs in funktionalen Materialien bis zu tausend Mal schneller geschaltet werden können als in vorhandenen Halbleiter-Schaltern. Seit kurzem rücken auch ferrimagnetische und antiferromagnetische Materialen in den Fokus des Interesses. Es wurde im Ferrimagnet GdFeCo gezeigt, dass der Transfer von Drehimpuls zwischen zwei entgegengesetzten Subsystemen mit unterschiedlichen Zeitkonstanten zu einem Umschalten der Magnetisierung führt. Zudem wurde vorhergesagt, dass Demagnetisierungsdynamiken in antiferromagnetischen Materialien schneller ablaufen soll als in ferromagnetischen, da kein Drehimpuls aus dem Spinsystem abgeführt werden muss. Damit wir mehr über antiferromagnetische Dynamik erfahren haben wir zwei unterschiedliche Antiferromagneten untersucht, um sie mit den bekannten FM zu vergleichen. Im metallischen AFM Holmium fanden wir, dass die magnetische Ordnung schneller und zehnmal energieeffizienter zerstört werden kann als in vergleichbaren FM Metallen. In Europium-Tellurid, einem antiferromagnetischem Halbleiter, haben wir den Zerfall der magnetischen Ordnung im Hinblick auf Wechselwirkungen mit der Struktur untersucht. Wir fanden auf kurzen Zeitskalen eine eher entkoppelte Dynamik. Eine Ausnahme ist ein schneller Beitrag zur Gitterdynamik, den wir mit dem Wegfall von Magnetostriktion erklären. Die hier gezeigten Ergebnisse wurden mit Hilfe zeitaufgelöster resonanter weicher Röntgenbeugung an der Femtoslicing Strahlungsquelle des Helmholtz-Zentrums Berlin und am freien Elektronenlaser LCLS gemessen. Zusätzlich wird über die Entwicklung und den Bau eines UHV-Diffraktometers für diese Experimente berichtet.