Spelling suggestions: "subject:"photoelectrochemistry."" "subject:"fotoelectrochemistry.""
61 |
Synthesis and characterization of catalysts for photo-oxidation of waterSheth, Sujitraj 11 December 2013 (has links) (PDF)
Artificial photosynthesis is often considered to have great potential to provide alternative, renewable fuels by harvesting, conversion and storage of solar energy. One promising approach is the development of modular molecular photocatalysts inspired by natural photosynthetic enzymes. The first part of this thesis deals with artificial mimics of the water oxidizing photosystem II composed of a chromophore and an electron relay as synthetic counterpart of the P680-TyrZ/His190 ensemble of photosystem II. Three ruthenium polypyridyl - imidazole - phenol complexes with varying position of a methyl group on the phenol ring (Ru-xMe) were synthesized and characterized by electrochemical and photophysical methods. As an improvement compared to earlier complexes the increased redox potential (~0.9 V vs. Ferrocene) of the phenol groups makes their function as an electron relay in a photocatalytic system for water oxidation thermodynamically possible. Time-resolved absorption studies revealed fast intramolecular electron transfer (<5-10 µs in aprotic solvent and <100 ns in water) despite the low driving force and the importance of the hydrogen bond between the phenol and the imidazole group was put in evidence. Slight differences between the three Ru-xMe complexes and investigation of the effect of external bases allowed to derive a mechanistic picture in which the imidazole is involved in a "proton domino" reaction. Accepting the phenolic proton upon ligand oxidation (within the H-bond) renders its second nitrogen site more acidic and only deprotonation of this site pulls the overall equilibrium completely towards oxidation of the ligand. Another part of this thesis comprises a chromophore-tryptophan construct synthesized using a click chemistry approach. Light-induced oxidation of Trp in this Ru-tryptophan complex was shown to follow ETPT mechanism. Depending on the pH conditions tryptophan radicals, either Trp* or TrpH*⁺ were detected and spectral measurement at different time showed the transition between the two forms. Deprotonation of the radical was dependent on the concentration of water as proton acceptor. Later part of the thesis deals with efforts to covalently bind a catalytic unit to the previously characterized chromophore-electron relay module. The click chemistry approach was not successful to obtain the final photocatalytic assembly. Therefore bimolecular activation of a Mn salen catalyst was performed and formation of Mn(IV) species was observed. As a step towards utilization of these types of photocatalysts in a photoelectrochemical cell a [Ru(bpy)₃]²⁺ chromophore with phosphonate anchoring groups (Ru-Phosphonate) was synthesized and grafted on the surface of a TiO₂ mesoporous semiconductor surface anode to perform photocurrent measurements.
|
62 |
Caractérisation photoélectrochimique d'oxydes thermiques développés sur métaux et alliages modèles / Photoelectrochemical characterization of thermal oxide developed on metal and model alloysSrisrual, Anusara 05 July 2013 (has links)
La Corrosion Haute Température (HTC), en environnements divers et sévères, d'alliages métalliques toujours plus élaborés en termes de composition et micro-structure, est un sujet industriel et scientifique très complexe. La PhotoElectroChimie (PEC) est une technique de choix pour caractériser les propriétés physico-chimiques et électroniques des couches d'oxydation très hétérogènes formées en HTC. Sur des exemples d'alliages modèles mais représentatifs de la réalité industrielle (aciers duplex, base-Nickel 690), ce travail présente le développement et la validation d'un dispositif expérimental permettant d'appliquer pour la première fois tout l'arsenal des techniques PEC à l'échelle mésoscopique (typiquement 30 µm), ainsi que la validation d'une modélisation originale développée au SIMaP des spectres de photocourants en énergie, qui permet de les décrire et ajuster finement et d'en extraire notamment avec précision les gaps des oxydes semiconducteurs présents dans la couche thermique. / High Temperature Corrosion (HTC), in various and severe atmospheres, of continually more elaborated (composition, micro–structure) metallic alloys, is a rather complex industrial and scientific topic. PhotoElectroChemistry (PEC) acquired a special place in the characterization of physico–chemical and electronic properties of the highly heterogeneous oxidation layers formed in HTC. Through studies of model but industrially representative samples (duplex stainless steel, Ni–base alloy 690), this work presents the development and validation of an experimental set–up allowing for the first time to use the whole set of PEC techniques at the mesoscopic level (typically 30 µm), as well as the validation of an original model of photocurrent energy spectra, developed at SIMaP, allowing to well describe, and accurately fit the latter spectra, and thus yielding, notably, precise bandgap values for the semiconducting components of the thermal scale.
|
63 |
Non-stoichiometric Cu–In–S@ZnS nanoparticles produced in aqueous solutions as light harvesters for liquid-junction photoelectrochemical solar cellsRaevskaya, Alexandra, Rosovik, Oksana, Kozytskiy, Andriy, Stroyuk, Oleksandr, Dzhagan, Volodymyr, Zahn, Dietrich R. T. 06 March 2017 (has links)
A direct “green” aqueous synthesis of mercapto acetate-stabilized copper indium sulfide (CIS) nanoparticles (NPs) and core/shell CIS@ZnS NPs of a varied composition under ambient conditions and a temperature lower than 100 °C is reported. The CIS@ZnS NPs can be anchored to the surface of nanocrystalline FTO/TiO2 films without additional purification or ligand exchange steps yielding visible-light-sensitive heterostructures ready for using as photoanodes in the liquid-junction solar cells. The highest photoelectrochemical activity in a three-electrode cell was demonstrated by a TiO2/CIS@ZnS heterostructure with atomic Cu : In : S and Zn : Cu ratios of 1 : 5 : 10 and 1 : 1. The optimized TiO2/CIS@ZnS photoanodes were tested in two-electrode solar cells with aqueous polysulfide electrolyte and TiO2/Cu2S heterostructures produced by a photo-assisted method as counter-electrodes. Under illumination by a 30 mW cm−2 xenon lamp, the optimized cells showed the average light conversion efficiency of 8.15%, the average open-circuit voltage of −0.6 V and the average fill factor of 0.42. The cells revealed excellent stability and reproducibility of photoelectrochemical parameters with around one percent variation of the light conversion efficiency around an average value for six identical solar cells. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.
|
64 |
Synthesis and characterization of catalysts for photo-oxidation of water / Conception et caractérisation de nouveaux catalyseurs pour la photolyse de l’eauSheth, Sujitraj 11 December 2013 (has links)
La photosynthèse artificielle est considérée comme étant un atout capable de fournir des carburants alternatifs et renouvelables par conversion et stockage de l'énergie solaire. Une approche prometteuse consiste en un développement de photo-catalyseurs moléculaires inspirés par des enzymes photosynthétiques naturelles. La première partie de cette thèse concerne les modèles artificiels du photosystème II (qui catalyse l'oxydation d'eau), composé d'un chromophore et d’un relais d’électrons comme équivalent synthétique correspondant à l'ensemble P680-TyrZ/His190 du photosystème II. Trois complexes ruthénium polypyridyl - imidazole - phénol avec un groupe méthylique à différentes positions sur l'anneau phénolique (Ru-xMe) ont été synthétisés et caractérisés par des méthodes électrochimiques et photophysiques. L’augmentation, comparée aux complexes précédents, du potentiel redox des groupes phénols (0.20 V->0.9 V par rapport à l’électrode de ferrocène) rend leur fonction de relais d’électron dans un système photocatalytique pour l'oxydation d'eau thermodynamiquement possible. Des études d’absorption transitoire ont révélé que le transfert d’électron intramoléculaire est rapide (5-10 µs dans solvant aprotique et < 100 ns dans l'eau) malgré la faible force motrice, mettant en evidence l'importance de la liaison hydrogène entre le phénol et le groupe imidazole. Les légères différences entre les trois complexes Ru-xMe ainsi que l’étude de l'effet de bases externes nous ont permis d’établir un mécanisme dans laquelle l'imidazole est impliqué dans une réaction de transfert de proton en cascade. L'acceptation du proton phénolique durant l'oxydation du ligand rend son deuxième site azote plus acide et seulement la déprotonation de ce dernier bascule l’équilibre réactionnel complétement vers l'oxydation du ligand. La deuxième partie de cette thèse consiste en la synthèse d’un complexe chromophore-tryptophane en utilisant une approche de chimie dite « click ». On a montré que l'oxydation, induite par la lumière, du Trp au sein du complexe Ru-tryptophane suit un mécanisme ETPT. Selon le pH, les radicaux du tryptophane (Trp• ou TrpH•⁺) ont été détectés et les mesures spectrales à différents temps ont montrés la transition entre les deux formes radicalaires. La déprotonation du radical dépend de la concentration d'eau assurant la fonction d’accepteur de proton. La dernière partie de la thèse concerne nos efforts à lier, par une liaison covalente, une unité catalytique au module de chromophore- relais électronique caractérisé précédemment. L'approche de chimie « click » n’était pas efficace pour l’obtention de l’assemblage photocatalytique final. Donc, l'activation biomoléculaire d'un catalyseur Mn salen a été effectuée et la formation de l’espèce Mn(IV) a été observée. Etant une étape vers l'utilisation de ces types de photocatalyseurs dans une cellule photoélectrochimique, un chromophore [Ru(bpy)₃]²⁺ avec des groupes d’ancrage phosphonate a été synthétisé (Ru-phosphonate) et greffé sur la surface méso-poreuses d'un semi-conducteur de TiO₂ pour effectuer des mesures du photocourant. / Artificial photosynthesis is often considered to have great potential to provide alternative, renewable fuels by harvesting, conversion and storage of solar energy. One promising approach is the development of modular molecular photocatalysts inspired by natural photosynthetic enzymes. The first part of this thesis deals with artificial mimics of the water oxidizing photosystem II composed of a chromophore and an electron relay as synthetic counterpart of the P680-TyrZ/His190 ensemble of photosystem II. Three ruthenium polypyridyl – imidazole - phenol complexes with varying position of a methyl group on the phenol ring (Ru-xMe) were synthesized and characterized by electrochemical and photophysical methods. As an improvement compared to earlier complexes the increased redox potential (~0.9 V vs. Ferrocene) of the phenol groups makes their function as an electron relay in a photocatalytic system for water oxidation thermodynamically possible. Time-resolved absorption studies revealed fast intramolecular electron transfer (<5-10 µs in aprotic solvent and <100 ns in water) despite the low driving force and the importance of the hydrogen bond between the phenol and the imidazole group was put in evidence. Slight differences between the three Ru-xMe complexes and investigation of the effect of external bases allowed to derive a mechanistic picture in which the imidazole is involved in a “proton domino” reaction. Accepting the phenolic proton upon ligand oxidation (within the H-bond) renders its second nitrogen site more acidic and only deprotonation of this site pulls the overall equilibrium completely towards oxidation of the ligand. Another part of this thesis comprises a chromophore-tryptophan construct synthesized using a click chemistry approach. Light-induced oxidation of Trp in this Ru-tryptophan complex was shown to follow ETPT mechanism. Depending on the pH conditions tryptophan radicals, either Trp• or TrpH•⁺ were detected and spectral measurement at different time showed the transition between the two forms. Deprotonation of the radical was dependent on the concentration of water as proton acceptor. Later part of the thesis deals with efforts to covalently bind a catalytic unit to the previously characterized chromophore-electron relay module. The click chemistry approach was not successful to obtain the final photocatalytic assembly. Therefore bimolecular activation of a Mn salen catalyst was performed and formation of Mn(IV) species was observed. As a step towards utilization of these types of photocatalysts in a photoelectrochemical cell a [Ru(bpy)₃]²⁺ chromophore with phosphonate anchoring groups (Ru-Phosphonate) was synthesized and grafted on the surface of a TiO₂ mesoporous semiconductor surface anode to perform photocurrent measurements.
|
Page generated in 0.0924 seconds