Au cours de ces dernières années, le réseau électrique est devenu un candidat incontournable pour la transmission de données à haut débit à l’intérieur des bâtiments. De nombreuses solutions sont actuellement à l’étude afin d’optimiser ces technologies connues sous le nom Courants Porteurs en Ligne (CPL) ou PLC (Power-Line Communications). La technique MIMO (Multiple-Input Multiple-Output) a été tout récemment transposée au réseau filaire électrique pour lequel différents modes d’alimentation peuvent être envisagés entre la phase, le neutre et la terre. Dans le cadre de cette thèse, nous proposons deux contributions originales à l’étude des communications numériques sur le réseau électrique à l’intérieur des bâtiments. La première contribution concerne la modélisation du canal MIMO-PLC. En repartant d’un modèle du canal paramétrique SISO (Single-Input Single-Output) connu dans la littérature, nous proposons un modèle du canal MIMO en considérant un nouveau paramètre caractérisant la corrélation spatiale. Le modèle proposé permet de représenter fidèlement la corrélation spatiale des mesures effectuées à l’échelle européenne. La deuxième contribution concerne le bruit impulsif présent sur le réseau électrique domestique qui constitue un problème majeur dans les systèmes de communications. Nous proposons une méthode basée sur la notion de capacité de coupure afin d’optimiser le débit moyen dans les systèmes OFDM (Orthogonal Frequency Division Multiplexing) soumis aux bruits impulsifs. D’abord, nous étudions la capacité du système en fonction d’une marge de bruit fournie aux symboles transmis. Ensuite, nous déterminons l’expression analytique de la probabilité de coupure (outage) d’un symbole OFDM en fonction de cette marge, en étudiant de manière détaillée l’interaction entre l’impulsion de bruit et le symbole. A partir de ces deux calculs, nous déduisons la capacité de coupure. Puis, nous proposons une approche qui maximise l’espérance mathématique du débit reçu. Finalement, nous présentons les résultats obtenus dans le cas particulier d’une transmission à haut débit sur PLC en présence de bruits impulsifs. / In recent years, the electrical network has become an essential candidate for high-speed data transmission inside buildings. Many solutions are currently underway in order to optimize these technologies known under the name of in-home Power-Line Communications (PLC). Multiple-Input Multiple-Output (MIMO) technique has recently been transposed into power-line networks for which different signal feeding possibilities can be considered between phase, neutral and earth wires. In this thesis, we propose two original contributions to indoor broadband PLC. The first contribution concerns the MIMO-PLC channel modeling. Based on a Single-Input Single-Output (SISO) parametric channel model presented in the literature, we propose a MIMO one by considering a new parameter which characterizes the spatial correlation. The proposed model enables an accurate description of the spatial correlation of European MIMO PLC field measurements. The second contribution is related to the impulsive noise present in power-line networks which constitutes a major problem in communications systems. We propose an outage capacity approach in order to optimize the average data rate in Orthogonal Frequency Division Multiplexing (OFDM) systems affected by impulsive noise. First, we study the channel capacity as a function of a noise margin provided to the transmitted symbols. Then we determine the analytical expression of the outage probability of an OFDM symbol in terms of the noise margin, by studying in detail the interaction between the noise impulse and the symbol. Based on the two aforementioned relations, we deduce the outage capacity. Then we propose an approach that enables to maximize the average system data rate. Finally, we present the results in the particular case of indoor broadband PLC in the presence of impulsive noise.

The low-voltage power distribution network is considered today as a serious candidate to provide residential customers with a high-speed access to communication services such as Internet. Outdoor Power-Line Communications (PLC) systems represent an alternative to the other classical 'last-mile solutions' such as ADSL, cable modems, or wireless access systems. We developed an accurate powerline channel simulation tool based on the Multiconductor Transmission Line theory. This tool is able to predict the end-to-end channel responses on the basis of the multiconductor cable structure and the network topology. Then the issue of optimal resource allocation in a multiuser environment was addressed in the light of the Multiuser Information Theory. Simultaneously active users are in competition for the limited resources that are the power (constrained by electro-magnetic compatibility restrictions) and the bandwidth (in the range of 1 to 10 MHz for outdoor PLC). The concept of multiuser balanced capacity was introduced to characterize the optimal resource allocation providing the maximum data rates with fairness constraints among the subscribers. The optimal PLC system was shown to require the shaping of the signal spectrum in the transmitters, and successive decoding in the receiver. A generic multiple access scheme based on Filter Banks (FB) was proposed, which offers the required spectral shaping with limited degrees of freedom. Classical multiple-access techniques (TDMA, CDMA, OFDMA) can be obtained by selecting the appropriate FB. The Minimum-Mean-Square-Error Decision-Feedback Joint Detector was shown to approach the performance of the optimal successive decoding receiver. Finally, the robustness of the proposed system against channel estimation and timing synchronization errors was addressed. The problem of multiuser timing synchronization was introduced, and practical multiuser timing error detectors were proposed.

Submitted by Geandra Rodrigues (geandrar@gmail.com) on 2017-12-21T11:52:32Z No. of bitstreams: 1 luisguilherrmedasilvacosta.pdf: 2910682 bytes, checksum: da61cee3e668dc7356aa3ab54ff0c28c (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-12-22T11:58:44Z (GMT) No. of bitstreams: 1 luisguilherrmedasilvacosta.pdf: 2910682 bytes, checksum: da61cee3e668dc7356aa3ab54ff0c28c (MD5) / Made available in DSpace on 2017-12-22T11:58:44Z (GMT). No. of bitstreams: 1 luisguilherrmedasilvacosta.pdf: 2910682 bytes, checksum: da61cee3e668dc7356aa3ab54ff0c28c (MD5) Previous issue date: 2017 / Esta tese de doutorado apresenta, inicialmente, uma revisão sobre acopladores para power line communication (PLC), utilizados para acoplar o sinal dos transceptores PLC à rede de energia elétrica. As questões predominantes para o projeto de acopladores e, consequentemente, os diferentes tipos de acopladores são discutidos. Uma classificação dos acopladores PLC baseada nos tipos de acoplamentos (capacitivo, indutivo, resistivo e por antenas), níveis de tensão, largura de banda de frequência, modos de propagação e números de conexões com a rede de energia elétrica é apresentada. Em seguida, o projeto de circuitos PLC de acoplamento capacitivo não adaptativos, single input single output (SISO) de baixa tensão para aplicações banda larga e banda estreita são discutidos. O acoplador PLC banda estreita é projetado para a banda de frequência de 9 kHz-500 kHz, enquanto os acopladores banda larga são projetados para a banda de frequência de 1.7-50 MHz, 1.7-100 MHz e 1.7-500 MHz. Além disso, discute-se as especificações e o projeto dos protótipos desses circuitos de acoplamento PLC medindo seus parâmetros de espalhamento. A seguir, é discutida a medida da impedância de acesso da rede de energia elétrica de baixa tensão na banda de frequência 2- 500 MHz, visando apresentar prévio conhecimento da impedância de acesso da rede de energia elétrica no Brasil com base em uma campanha de medição realizada em várias instalações em três cidades brasileiras diferentes. Além disso, é proposto um procedimento para obter um modelo estatístico da impedância de acesso na referida faixa de frequência. Com base em uma série de medidas de impedâncias de acesso da rede de energia elétrica e critérios para a escolha de modelos estatísticos, esta tese sugere duas distribuições para modelar as componentes resistência e reatância da impedância de acesso da rede de energia elétrica. Uma vez que, os parâmetros de tais modelos mudam com a frequência e que a impedância de acesso é um processo aleatório no domínio da frequência, um modelo simples para gerar amostras em função desse processo aleatório, que leva em consideração as distribuições sugeridas, é detalhado. Por fim, é proposto um circuito de acoplamento adaptativo PLC, capacitivo, SISO de baixa tensão. Estes circuitos de acoplamento adaptativos usam três diferentes filtros analógicos passa-baixa com diferentes impedâncias de entrada. A impedância de entrada de cada filtro analógico é projetado de acordo com os valores obtidos através da campanha de medição, e a impedância de saída é projetada para 50 Ω. A escolha do filtro analógico que proporciona melhor casamento de impedância com a rede de energia elétrica é obtido por um microcontrolador, que através de um conversor analógico digital, monitora a tensão fornecida por um circuito que mede a potência dos sinais injetados nos acopladores PLC pelos transceptores PLC. A monitoração da potência é realizada continuamente pelo conversor analógico digital do microcontrolador que escolhe qual o filtro analógico proporciona o melhor casamento de impedância com a rede de energia elétrica e comuta os filtros analógicos através de uma chave de analógica conectando os transceptores PLC a rede de energia elétrica através dos acopladores PLC. Além disso, as medições dos valores do parâmetro de espalhamento S11 confirmam que a componente resistiva da impedância de acesso da rede de energia elétrica apresentou melhor casamento de impedância entre 50 Ω e 100 Ω. Por fim, os valores medidos do parâmetro de espalhamento S12 mostram que a atenuação cresce com o aumento da frequência devido ao comportamento indutivo da rede de energia elétrica. / This work outlines a comprehensive review of PLC coupling circuits, which are required for narrowband and broadband PLC transceivers. Prevailing issues that protract the design of couplers and consequently subtended the inventions of different types of couplers are clearly described. Also, it provides a useful classification of PLC couplers based on the type of physical couplings, voltage levels, frequency bandwidth, propagation modes and a number of connections. Next, the focus is on the design of non-adaptive capacitive, SISO and low-voltage (LV) PLC coupling circuits for both broadband and narrowband applications. The narrowband cover the frequency band 9 kHz-500 kHz, while broadband frequency bands are 1.7-50MHz, 1.7-100MHz and 1.7- 500 MHz. Moreover, it discusses the specification and design of the prototypes of the PLC coupling circuits measuring their scattering parameters. The access impedance of Brazilian in-home, broadband and low-voltage electric power grid in the frequency band 2-500 MHz is taken into account. Based on the use of a measurement setup a large measurement campaign that was carried out in several facilities in three different Brazilian cities is discussed. Also, a procedure to obtain a statistical model of the access impedance in the aforementioned broadband frequency is outlined. Based on a number of measured access impedances and well-known criteria for choosing statistical models, two distributions to model the resistance and reactance components of the access impedance are suggested. Due to the fact that the parameters of such models change with the frequency and the access impedance is a random process in the frequency domain, a simple and effective model to generate samples function of such random process, which takes into account the suggested distributions, is addressed. Finally, adaptive capacitive, SISO and LV PLC coupling circuits are proposed for broadband power line communication. These adaptive coupling circuits use three different analog low-pass filter for impedance matching. This filter is an array of analog low-pass irregular filters that separate the input and output signal into three analog low-pass filters, each one matching the impedance between the electric power grid and PLC transceiver. The input impedance of each filter has a different impedance value, chosen according to the impedance of the measurement campaign, and the output impedance is fixed in 50 Ω for all analog low-pass filter. The choice of the analog filter that provides better impedance matching to the electrical power grid is obtained by a microcontroller, which through an analog-to-digital converter (ADC), measure the voltage provided by a circuit that measures the power of the signals injected into the PLC coupling circuit by the PLC transceivers. The power is continuously measured by an ADC of the microcontroller which chooses which analog filter provides the best impedance matching with the electric power grid and switches the analog filters through an analog switcher connecting the PLC transceivers to the electric power grid through the PLC coupling circuit. In addition, the measured values of the scattering parameter S11 show that the best impedance matching occurs when the resistive impedance component of the access impedance is between 50 Ω and 100 Ω . For the scattering parameter S12 it has been found that the attenuation increases as the frequency increases because of the inductive behavior of the electric power grid.

The thesis is focused on PLC technology issues and thus the data transmission over a power-line. This work describes characteristics of the PLC technology, its usage, functional principles and used modulation techniques. The main part of the work describes individual kinds of interferences in the network. The method of necessary steps against these interferences by using the right modulation and relevant coding is also described in the thesis. On the basis of theoretical knowledge, the models of interferences are realized in Matlab/Simulink. The simulative model of power-lines with random parameters is designed and realized for each elected techniques of modulation (BPSK, QPSK, ASK, FSK). The method of PLC channels modeling is chose as a multipath signal spreading for topology with one and two branching and the dependence of their transmission functions are inquired too. The analysis of interference influence on the data transmission is performed via the created models. All acquired results are compared and evaluated in the conclusion of this thesis.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-04-24T15:28:35Z No. of bitstreams: 1 paolajohanasaboyalopez.pdf: 1042873 bytes, checksum: a46dd95de00e062cba39ef4b9b642462 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-04-24T17:09:24Z (GMT) No. of bitstreams: 1 paolajohanasaboyalopez.pdf: 1042873 bytes, checksum: a46dd95de00e062cba39ef4b9b642462 (MD5) / Made available in DSpace on 2017-04-24T17:09:24Z (GMT). No. of bitstreams: 1 paolajohanasaboyalopez.pdf: 1042873 bytes, checksum: a46dd95de00e062cba39ef4b9b642462 (MD5) Previous issue date: 2013-06-03 / A presente dissertação tem por objetivo propor e avaliar cinco técnicas de detecção de ruídos impulsivos para a melhoria da transmissão digital de dados via redes de energia elétrica (do inglês, Power Line Communications) (PLC). As técnicas propostas contemplam a detecção de ruídos impulsivos no domínio do tempo discreto, no domínio da transformada wavelet discreta (do inglês, Discrete Wavelet Transform) (DWT) e no domínio da transformada discreta de Fourier (do inglês, Discrete Fourier Transform) (DFT). Tais técnicas fazem uso de métodos de extração e seleção de características, assim como métodos de detecção de sinais baseados na teoria de Bayes e redes neurais. Análises comparativas explicitam as vantagens e desvantagens de cada uma das técnicas propostas para o problema em questão, e ainda indicam que estas são bastante adequadas para a solução do mesmo. / This dissertation aims to propose and evaluate five techniques for impulsive noise detection in order to improve digital communications through power line channels. The imput signals for the proposed detection techniques are impulsive noise signals on discrete-time domain, on the Discrete Wavelet Transform domain and on the Discrete Fourier Transform domain and it makes use of feature extraction and selection techniques, as well as detection techniques supported on Bayes Theory and Multi-layer Perceptron Neural Networks. Comparative analysis show some advantages and disadvantages of each proposed technique and the relevance of them to solve the impulsive noise detection problem.

El món de les comunicacions per la xarxa elèctrica (CXE) pot ser dividit en tres grans tipus: CXE en baix voltatge (CXE-BV), en mig voltatge (CXE-MV) i en alt voltatge (CXE-AV). En aquests últims anys, les CXE-BV han atret una gran expectació, ja que les seves capacitats han fet d'aquesta tecnologia una bona opció com alternativa pel bucle local d'accés i pel desplegament de xarxes d'àrea local, focalitzades aquestes últimes en l'entorn domèstic. A més, les CXE-BV inclouen un conjunt d'aplicacions de baixa velocitat orientades a l'operador, com la lectura automàtica de comptadors (LAC), distribució de càrrega, facturació dinàmica, etc. Per altra banda, les CXE-MV i CXE-AV, històricament lligades a tasques de telecontrol i teleprotecció, s'estan començant a considerar com un canal de comunicacions eficient i fiable. El desenvolupament de sistemes digitals i els esforços d'estandardització estan fent d'aquests canals un medi atractiu per a que els operadors elèctrics ofereixin serveis de comunicacions, ja que no necessiten invertir en infraestructura perquè la xarxa elèctrica ja està desplegada.En aquesta Tesi s'introduiran i es comentaran les particularitats de les tres xarxes elèctriques, després, es mostraran al lector les solucions tecnològiques existents pels canals de BV basats en la norma Europea CENELEC així com pels canals d'AV, mostrant que els sistemes actuals de LAC ofereixen una diversitat freqüencial molt baixa i que els mòdems CXE-AV estan ancorats en estendards antiquats.Aquest treball es mou per les tres topologies de la xarxa, particularment, en aplicacions orientades a la banda CENELEC, en mesura i modelat de canal, i en mesura i disseny del nivell físic per sistemes CXE-BV, CXE-MV i CXE-AV respectivament. Els sistemes actuals que exploten la banda CENELEC ofereixen mecanismes d'explotació de la diversitat freqüencial del canal molt limitats o nuls, donant lloc a una baixa robustesa en front a interferències i soroll de fons acolorit. Aquest treball proposa un esquema de modulació multiportadora que, mantenint una complexitat baixa, ofereix unes altes prestacions permetent un bon nivell d'explotació de la selectivitat freqüencial. Per al que a CXE-MV respecta, aquesta Tesi desenvolupa un model de canal determinístic-estadístic pels anells urbans de distribució de potència i, finalment, en sistemes CXE-AV, aquest treball proposa, basat en mesures de canal i proves de camp, un nivell físic de banda ampla capaç de incrementar la velocitat de comunicació mentre manté una baixa densitat espectral de potència limitant així la interferència a altres sistemes.PARAULES CLAU: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / El mundo de las comunicaciones por la red eléctrica (CRE) puede ser dividido en tres grandes tipos: CRE en bajo voltaje (CRE-BV), en medio voltaje (CRE-MV) y en alto voltaje (CRE-AV). En estos últimos años, las CRE-BV han atraído una gran expectación, ya que sus capacidades han hecho de esta tecnología una buena opción como alternativa para el bucle local de acceso y para el despliegue de redes de área local, focalizadas estas últimas en el entorno doméstico. Además, las CRE-BV incluyen un conjunto de aplicaciones de baja velocidad orientadas al operador como la lectura automática de contadores (LAC), distribución de carga, facturación dinámica, etc. Por otro lado, las CRE-MV y CRE-AV, históricamente ligadas a tareas de telecontrol y teleprotección, se están empezando a considerar como un canal de comunicaciones eficiente y fiable. El desarrollo de sistemas digitales y los esfuerzos de estandarización están haciendo de estos canales un medio atractivo para que los operadores eléctricos ofrezcan servicios de comunicaciones, ya que no necesitan invertir en infraestructura porque la red eléctrica ya está desplegada.En esta Tesis se introducirán y se comentarán las particularidades de las tres redes eléctricas, luego, se mostrarán al lector las soluciones tecnológicas existentes para los canales de BV basados en la norma Europea CENELEC así como para los canales de AV, mostrando que los sistemas actuales de LAC ofrecen una diversidad frecuencial muy baja y que los módems CRE-AV están anclados en estándares anticuados.Este trabajo se mueve por las tres topologías de red, particularmente, en aplicaciones orientadas a la banda CENELEC, en medida y modelado de canal, y en medida y diseño del nivel físico para sistemas CRE-BV, CRE-MV y CRE-AV respectivamente. Los sistemas actuales que explotan la banda CENELEC ofrecen mecanismos de explotación de la diversidad frecuencial del canal muy limitados o nulos, dando lugar a una escasa robustez frente a interferencias y ruido de fondo coloreado. Este trabajo propone un esquema de modulación multiportadora que, manteniendo una complejidad baja, ofrece unas altas prestaciones permitiendo un buen nivel de explotación de la selectividad frecuencial. Por lo que a CRE-MV respecta, esta Tesis desarrolla un modelo de canal determinístico-estadístico para los anillos urbanos de distribución de potencia y, finalmente, en sistemas de CRE-AV, este trabajo propone, basado en medidas de canal y pruebas de campo, un nivel físico de banda ancha capaz de incrementar la velocidad de comunicación mientras mantiene una baja densidad espectral de potencia limitando así la interferencia a otros sistemas.PALABRAS CLAVE: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / The world of Power line communications (PLC) can be divided into three main types: low voltage PLC (LV-PLC), medium voltage PLC (MV-PLC) and high voltage PLC (HV-PLC). These last years, LV-PLC has attracted a great expectation since its wideband capabilities has made this technology a suitable choice for last-mile access and in-home communications. Moreover, LV-PLC also includes a utility oriented low frequency and low speed applications, such as automatic meter reading (AMR), load distribution, dynamic billing and so on. On the other hand, MV-PLC and HV-PLC, historically oriented to teleprotection and telecontrol tasks, are being considered as a reliable communication channel. The development of digital equipment and the standardization efforts are making those channels an attractive medium for electrical utilities telecommunications services, since the network, as well as in LV-PLC, is already deployed. In this PhD dissertation, the three different PLC topologies are reviewed and the different communications techniques in such channels exposed. Then, a deep technological review of existing AMR solutions for the European CENELEC band, as well as HV-PLC systems is given, showing that existing AMR systems deliver low frequency diversity and HV-PLC systems are anchored in old fashioned standards.This work walks around the three topologies, specifically, CENELEC band utility oriented applications, channel measurement and modeling and channel measurement and physical layer design, regarding LV-PLC, MV-PLC and HV-PLC respectively. Existing CENELEC compliant systems deliver low or none frequency diversity mechanisms, yielding in a low robustness against colored noise and interference. This work propose a multicarrier based physical layer approach that, while keeping the complexity low, delivers high performance allowing a great level of frequency diversity. Focusing on MV-PLC, a hybrid deterministic-statistical channel model for urban underground rings is developed and, finally, in HV-PLC systems, this work proposes, based on measurements and field tests, a wideband physical layer in order to increase data rate while keeping low both the power spectral density and possible interference to other systems.KEYWORDS: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.

Le travail présenté dans cette thèse a pour objectif de proposer et d'évaluer les performances de différentes techniques de suppression de bruit impulsif de type asynchrone adaptées aux transmissions sur courants porteurs en lignes (CPL) indoor. En effet, outre les caractéristiques physiques spécifiques à ce type de canal de transmission, le bruit impulsif asynchrone reste la contrainte sévère qui pénalise les systèmes CPL en terme de QoS. Pour remédier aux dégradations dues aux bruits impulsifs asynchrones, les techniques dites de retransmission sont souvent très utilisées. Bien qu'elles soient efficaces, ces techniques de retransmission conduisent à une réduction de débit et à l’introduction de délais de traitement supplémentaires pouvant être critiques pour des applications temps réel. Par ailleurs, plusieurs solutions alternatives sont proposées dans la littérature pour minimiser l'impact du bruit impulsif sur les transmissions CPL. Cependant, le nombre de techniques, qui permettent d'obtenir un bon compromis entre capacité de correction et complexité d'implantation reste faible pour les systèmes CPL. Dans ce contexte, nous proposons dans un premier temps d'utiliser un filtre linéaire adaptatif : le filtre de Widrow, nommé aussi ADALINE (ADAptive LInear NEuron), que nous utilisons comme méthode de débruitage pour les systèmes CPL. Pour améliorer les performances du débruitage effectué à l'aide d'ADALINE, nous proposons d'utiliser un réseau de neurones (RN) non linéaire comme méthode de débruitage. Le réseau de neurones est un bon outil qui est une généralisation de la structure du filtre ADALINE. Dans un deuxième temps, pour améliorer les performances du débruitage par un réseau de neurones, nous proposons un procédé d'annulation du bruit impulsif constitué de deux algorithmes : EMD (Empirical Mode Decomposition) associé à un réseau de neurones de type perceptron multicouches. L'EMD effectue le prétraitement en décomposant le signal bruité en signaux moins complexes et donc plus facilement analysables. Après quoi le réseau de neurones effectue le débruitage. Enfin, nous proposons une méthode d'estimation du bruit impulsif utilisant la méthode GPOF (Generalized Pencil Of Function). L'efficacité des deux méthodes, EMD-RN et la technique utilisant l'algorithme GPOF, est évaluée en utilisant une chaîne de simulation de transmission numérique compatible avec le standard HPAV. / The aim of our thesis is to propose and to evaluate the performances of some asynchronous impulsive noise mitigation techniques for transmission over indoor power lines. Indeed, besides the particular physical properties that characterize this transmission channel type, asynchronous impulsive noise remains the difficult constraint to overcome on power lines communications (PLC). Usually, the impact of asynchronous impulsive disturbances over power lines is partly compensated by means of retransmission mechanisms. However, the main drawbacks of the use of retransmission solutions for impulsive noise mitigation are the bitrate loss and the induced time delays that may be prohibitive for real-time services. Although several other countering strategies are proposed in the literature, only very few of them have a good compromise between correction capability and implementing complexity for PLC systems. In this context, we proposed an adaptive linear filter, the Widrow filter, also known as ADALINE (Adaptive LInear neurons), as a denoising method for PLC systems. To improve the performance of the denoising method using ADALINE, we proposed to use a neural network (NN) as a nonlinear denoising method. The neural network is a good generalization of the ADALINE filter. In a second step, to improve the performances of denoising by NN, we proposed a combined denoising method based on EMD (Empirical Mode Decomposition) and MLPNN (Multi Layer Perceptron Neural Network). The noised signal is pre-processed by EMD which decomposes it into signals less complex and therefore more easily analyzed. Then the MLPNN denoises it. Finally, we proposed an asynchronous impulsive noise estimation method using the GPOF method (Generalized Pencil Of Function). The performances of the two methods, EMD-MLPNN and GPOF technique, are evaluated using a PLC transmission chain compatible with the HPAV standard.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-02-11T10:56:22Z No. of bitstreams: 1 juandavidvalenciapayan.pdf: 2769602 bytes, checksum: f450fbb83bbe8b4e5a8cdb7c9b4fa338 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-02-26T11:57:12Z (GMT) No. of bitstreams: 1 juandavidvalenciapayan.pdf: 2769602 bytes, checksum: f450fbb83bbe8b4e5a8cdb7c9b4fa338 (MD5) / Made available in DSpace on 2016-02-26T11:57:12Z (GMT). No. of bitstreams: 1 juandavidvalenciapayan.pdf: 2769602 bytes, checksum: f450fbb83bbe8b4e5a8cdb7c9b4fa338 (MD5) Previous issue date: 2014-03-27 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Esta contribuição descreve uma caracterização estatística da rede de baixa tensão Brasileira residencial como meio de comunicação. As discussões são baseadas em canais estimados obtidos em uma campanha de medição realizada em quatro apartamentos diferentes, com tamanhos que variam de 50 até 90 metros quadrados. Os parâmetros considerados para esta análise são o Root Mean Square Delay Spread, o ganho médio do canal e a capacidade do canal. Para efeitos de comparação com a rede de potencia dos Estados Unidos, a banda de frequência utilizada foi de 1:705 até 30 MHz. A análise relatada mostra que o Root Mean Square Delay Spread e o ganho médio do canal não podem ser modelados como variáveis log-normal. Os resultados obtidos geram dúvidas em relação aos atuais encontrados na literatura, em que se afirma que tanto o Root Mean Square Delay Spread quanto o ganho médio do canal seguem uma distribuição log-normal. Foram medidos também a impedância de acesso e o ruído do canal de comunicação via rede elétrica. Além disso, os conceitos de cooperação para melhorar o desempenho dos sistemas de comunicação via rede elétrica foram analisados, mais especificamente na rede de baixa tensão Brasileira residencial. Para isso, foram analisados a performance dos protocolos de Amplify-and-Forward e Decode-and-Forward, em conjunto com as técnicas de combinação Equal-Gain Combining, Selection-Combining e Maximal-Ratio Combining. A análise sobre os dados medidos cobriram uma faixa de frequência de 1:705 a 100 MHz. Os dados medidos abordam quatro cenários para possíveis localizações do nó Relay. Os resultados obtidos mostram que o Amplify-and- Forward é de aplicabilidade limitada no contexto de comunicação via rede elétrica e o oposto é válido para o protocolo de Decode-and-Forward, principalmente se a probabilidade de erro de detecção de símbolos no nó Relay tende a zero. / This thesis outlines a statistical characterization of the Brazilian In-Home Low-Voltage Electric Power Grid as a communication medium. The discussions are based on estimated channels obtained in a measurement campaign carried out in four different apartments with sizes ranging from 50 up to 90 square meters. The parameters considered for this analysis are the Root Mean Square Delay Spread, the average channel gain, and the channel capacity. For the sake of comparison with the Electric Power Grid in United States, the frequency band ranging from 1:705 up to 30 MHz was set. The reported analysis shows that the Root Mean Square Delay Spread and the average channel gain cannot be modeled as log-normal variables, this cast doubt the current results found in the literature, in which is stated that both the Root Mean Square Delay Spread and the average channel gain follow a log-normal distribution. This was followed by the Power Line Communication access impedance and noise measurements in the In-Home Low-Voltage Electric Power Grid. Additionally, the suitability of cooperation concepts for improving the performance of Power Line Communication systems was analyzed, more specifically in the Brazilian In-Home Low-Voltage Electric Power Grid. For this purpose, the performance of the Amplify-and-Forward and Decode-and- Forward protocols, together with the Equal-Gain Combining, Selection Combining, and Maximal-Ratio Combining techniques were analyzed. The analysis was carried out on the measured data covering a frequency band from 1:705 up to 100 MHz. The measured data addresses four scenarios for possible relay node locations. The attained results show that the Amplify-and-Forward is of limited applicability in the Power Line Communication context and the opposite is valid to the Decode-and-Forward protocol, mainly if the error probability of detecting symbols at the relay node is zero.