Η παρούσα διπλωματική εργασία παρουσιάζει τα Ευφυή Συστήματα ελέγχου και τις εφαρμογές τους στον έλεγχο συστημάτων ηλεκτρικής ενέργειας. Τα διάφορα είδη Σταθεροποιητών Συστημάτων Ισχύος (ΣΣΙ) παρουσιάζονται επίσης. Τα ηλεκτρικά συστήματα είναι δυναμικά συστήματα και υποβάλλονται συνεχώς σε διαταραχές. Είναι σημαντικό οι διαταραχές αυτές να μην οδηγούν το σύστημα σε αστάθεια. Για αυτόν το λόγο, πρόσθετα σήματα που προέρχονται από την απόκλιση ταχύτητας, την απόκλιση διέγερσης και την ροπή επιτάχυνσης εισάγονται στους ρυθμιστές τάσης. Η συσκευή που παρέχει αυτά τα σήματα αναφέρεται ως Σταθεροποιητής Συστημάτων Ισχύος. Η χρήση των Σταθεροποιητών Συστημάτων Ισχύος είναι πολύ συχνή στη λειτουργία των μεγάλων συστημάτων ηλεκτρικής ενέργειας. Οι συμβατικοί Σταθεροποιητές Συστημάτων Ισχύος που χρησιμοποιούν την αντιστάθμιση προήγησης-καθυστέρησης φάσης, όπου οι ρυθμίσεις κέρδους σχεδιάζονται για τις συγκεκριμένες συνθήκες λειτουργίας, δίνουν φτωχές επίδοσεις υπό τις διαφορετικές συνθήκες φόρτισης. Επομένως, είναι πολύ δύσκολο να σχεδιαστεί ένας σταθεροποιητής που θα μπορούσε να επιτύχει καλές επιδόσεις σε διάφορες συνθήκες λειτουργίας των συστημάτων ηλεκτρικής ενέργειας. Σε μία προσπάθεια να καλυφθεί ένα ευρύ φάσμα των συνθηκών λειτουργίας,τα Ευφυή Συστήματα ελέγχου έχουν προταθεί ως πιθανή λύση για να υπερνικηθεί αυτό το πρόβλημα. Σε αυτήν την εργασία, μια συστηματική προσέγγιση στο σχέδιο ελέγχου Ασαφούς λογικής προτείνεται. Παρουσιάζεται η μελέτη του Σταθεροποιητή Συστημάτων Ισχύος Ασαφούς λογικής για την αύξηση της ευστάθειας ενός συστήματος μιας μηχανής συνδεδεμένης σε άπειρο ζυγό. Προκειμένου να ολοκληρωθεί η αύξηση της ευστάθειας, η απόκλιση ταχύτητας και η επιτάχυνση του ρότορα της σύγχρονης γεννήτριας λαμβάνονται ως είσοδοι στον ελεγκτή ασαφούς λογικής. Αυτές οι μεταβλητές έχουν σημαντική επίδραση στην απόσβεση των μηχανικών ταλαντώσεων των αξόνων των γεννητριών. Τα σήματα ευστάθειας υπολογίστηκαν χρησιμοποιώντας την ασαφή συνάρτηση συμμετοχής ανάλογα με αυτές τις μεταβλητές. Το Simulink/Μatlab χρησιμοποιήθηκε στην εφαρμογή της μελέτης. Η απόδοση του συστήματος με το Σταθεροποιητή Συστημάτων Ισχύος Ασαφούς λογικής συγκρίνεται με το σύστημα με το συμβατικό Σταθεροποιητή Συστημάτων Ισχύος καθώς και με το σύστημα χωρίς Σταθεροποιητή Συστημάτων Ισχύος. / In this thesis the different types of intelligent control systems and the various techniques used in power system stabilizers are considered. The power system is a dynamic system and it is constantly being subjected to disturbances. It is important that these disturbances do not drive the system to unstable conditions. For this purpose, additional signals derived from speed deviation, excitation deviation and accelerating power are injected into voltage regulators. The device to provide these signals is referred as power system stabilizer. The use of power system stabilizers has become very common in operation of large electric power systems. The conventional PSS which uses lead-lag compensation, where gain settings designed for specific operating conditions, is giving poor performance under different loading conditions. Therefore, it is very difficult to design a stabilizer that could present good performance in all operating points of electric power systems. In an attempt to cover a wide range of operating conditions, intelligent control systems have been suggested as a possible solution to overcome this problem. Inittialy in this thesis, an introduction of power system control and the different types of stabilizers is briefly described. Afterwards, the system modeling and power system stabilizer model is presented. Finally, a systematic approach to fuzzy logic control design is proposed. The study of fuzzy logic power system stabilizer for stability enhancement of a single machine infinite bus system is presented. In order to accomplish the stability enhancement, speed deviation and acceleration of the rotor synchronous generator are taken as the inputs to the fuzzy logic controller. These variables take significant effects on damping the generator shaft mechanical oscillations. The stabilizing signals were computed using the fuzzy membership function depending on these variables. Simulink Block Design and Matlab is utilized in implementing the study. The performance of the system with fuzzy logic based power system stabilizer is compared with the system having conventional power system stabilizer and system without power system stabilizer.

As novas tecnologias FACTS aplicadas ao sistema de transmissão, com base em eletrônica de potência, podem também ser úteis à distribuição. Para tal é preciso conduzir um procedimento de consolidação da utilização e do desempenho destas, para sua aplicação sem riscos. Neste trabalho, dois aspectos serão contemplados. O primeiro se refere à aplicação do dispositivo FACTS atuando como um capacitor série. Em se tendo controle de módulo e da fase da tensão inserida em série com a linha pode-se fazê-la comportar-se como uma queda em uma reatância série capacitiva ou indutiva. O controle dessa reatância série (aumentando/diminuindo) permitirá a aplicação do conceito de compensação série em qualquer ponto do sistema de distribuição, provendo benefícios de um controle contínuo da tensão e também do controle do fluxo de carga no sistema independente da corrente. O segundo aspecto refere-se ao uso dos dispositivos na conexão de alimentadores controlando a potência ativa entre eles. Para esta operação outro dispositivo UPFC, com conceito similar ao descrito acima, entretanto atuando na fase da tensão entre 2 barras, comporta-se como um transformador defasador com variação contínua de ?taps?, podendo controlar a potência ativa entre os alimentadores. A aplicação destas tecnologias propiciarão vários benefícios para a expansão da distribuição tais como, flexibilização do uso da rede, interligação de alimentadores permitindo manobras de blocos de energia sem ?pisca?, ajuste contínuo do suporte de reativos durante a operação, controle dinâmico do fluxo de potência. O objetivo deste trabalho é estudar a aplicabilidade da tecnologia FACTS e estender este conceito para aplicação em sistemas de distribuição e conduzir simulações digitais em redes de distribuição (15kV) identificando o desempenho e os benefícios atingidos. O programa de simulação utilizado é o ATP (Alternative Transients Program). / The new FACTS technologies applied to the transmission system, based on power electronics, can also be useful to the distribution. For that, it is necessary to drive a procedure to consolidate the use and the performance for their application without risks. In this work two aspects will be approached. The first refers to the application of a FACTS device acting as series compensator. This device will be able to control the voltage in module and phase in order to act as a voltage drop in a serie reactance with capacitive or inductive features. The control of this series reactance (increasing/ decreasing) will allow the application of series compensation concept to any point of the distribution system, providing the benefits of continuous control of the voltage added to the load flow control in the system independent of the current. The second aspect refers to its use in the connection of two feeders controlling the active power between them. For this operation other device, UPFC, with similar concept as described previously, acts mainly in the phase of the injected voltage in the line, performing as a phase-shift with continuous taps variation and is able to control the active power flow between feeders. The application of this technology will provide several benefits for the distribution expansion, such as, a greater flexibility in the use of the network, connection of feeders without load flow interruption, continuous adjust of reactive power during the operation and dynamic control of power flow. The purpose of this work is to study the applicability of the FACTS technology, to extend this concept for the application in the distribution system by using digital simulations in distribution network up to 15kV identifying the performance and the reached benefits.

Hybrid renewable energy system was introduced to improve the individual renewable energy power system’s productivity and operation-ability. This circumstance has led towards an extensive technological study and analysis on the hybrid renewable energy system. The extensive technological study is conducted using many different approaches, but in this research the linear programming, artificial intelligence and smart grid approaches are studied. This thesis proposed a complete hardware system development, implementation and construction of real-time DC Hybrid Renewable Energy System for solar-wind-battery energy source integrated with grid network support. The proposed real-time DC HRES hardware system adopts the hybrid renewable energy system concept which is composed of solar photovoltaic, wind energy system, battery energy storage system and grid network support. The real-time DC HRES hardware system research work is divided into three stages. Stage 1 involves modelling and simulation of the proposed system using MATLAB Simulink/Stateflow software. During this stage, system’s methodological design and development is emphasised. The obtained results are considered as fundamental finding to design, develop, integrate, implement and construct the real-time DC HRES hardware system. Stage II is designing and developing the electronic circuits for the real-time DC HRES hardware system using PROTEUS software. Real time simulation is performed on the electronic circuits to study and analyse the circuit’s behaviour. This stage also involves embedded software application development for the microcontroller PIC16F877A. Thus, continuous dynamic decision-making algorithm is developed and incorporated into microcontroller PIC16F877A. Next, electronic circuits and continuous dynamic decision-making algorithm are integrated with the microcontroller PIC16F877A as a real-time DC HRES hardware system to perform real time simulation. The real-time DC HRES hardware system simulation results are studied, analysed and compared with the results obtained in Stage 1. Any indifference between the obtained results in Stage 1 and Stage 2 are analysed and necessary changes are made. Stage 3 involves integrating, implementation and construction of real-time DC HRES. The continuous dynamic decision-making algorithm is also incorporated into the real microcontroller PCI16F877A development board. Real-time DC HRES’s experimental results have successfully demonstrated the system’s ability to perform supervision, coordination, management and control of all the available energy sources with lease dependency on the grid network. The obtained results demonstrated the energy management and optimisation of the available energy sources as primary power source deliver.

Thesis (DTech (Electrical Engineering))--Cape Peninsula University of Technology, 2010. / Static state estimation is a mathematical procedure in which physical measurements from sub-stations and physical model are combined in an optimal way. That is, the measurements obtained from the sub-stations are used with the physical model and the states of the power system are selected or calculated such that the states match the measurements in some best way. The states of a power system are the bus voltage magnitude and voltage angle of each bus of the system. Static state estimation is an increasingly common part of electrical power utility energy management systems (EMS). It plays a critical part in a day-to-day operation of a power system utility. The system measurements obtained from static estimation are used for realtime operations like optimal power flow calculations and contingency analysis. Proper system operations with regards to avoidance of insecure conditions includes situational awareness, therefore, the static estimator plays an important role in power system security. A further motivation: in increasingly electrical power deregulation, more economic operations mean savings for customers and electrical power provider alike. Economic benefit might be realized if system operators have a more accurate situational awareness of the system through improved power system state estimator. The objective of the study was to develop method, algorithm and MATLAB program for solution of power system state estimation using parallel processing techniques. In achieving the objective, the study has concentrated on development of an approximate Tanzanian power system network model comprising of 30 buses and used as a case study; decomposing the bus admittance matrix of the model into 3 interconnected sub-systems; development of mathematical model for real and reactive power injections, real and reactive power flows in the transmission lines and tie-lines connecting the sub-systems; development of measurement data model for voltage magnitude, real and reactive power injections, real and reactive power flows; formulating of a constrained weighted least absolute value state estimation problem; development of decomposition-coordination method and algorithm; and formulating algorithm and MATLAB program for solving the constrained state estimation problem using parallel processing technique.

Submitted by Irene Nascimento (irene.kessia@ufpe.br) on 2017-01-27T16:44:29Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) FellipeAndrade_Dissertação_VersãoFinal 6 vias.pdf: 2595465 bytes, checksum: aa417f9c06c9f1836959271c7d842b0e (MD5) / Made available in DSpace on 2017-01-27T16:44:29Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) FellipeAndrade_Dissertação_VersãoFinal 6 vias.pdf: 2595465 bytes, checksum: aa417f9c06c9f1836959271c7d842b0e (MD5) Previous issue date: 2016-07-29 / O presente estudo realiza uma análise da atuação dos Conselhos Municipais de Controle Social – CACS da principal política de financiamento da educação no Brasil: o Fundo de Manutenção e Desenvolvimento da Educação Básica e de Valorização dos Profissionais do Magistério – FUNDEB. O principal objetivo é investigar o grau de contribuição destes colegiados – que contam com a representação de diversos segmentos ligados ao ensino e também de seus principais beneficiários – para o cumprimento das finalidades do financiamento educacional, tendo como referência a administração municipal. São analisadas a estrutura organizacional, as regras de funcionamento, os meios de execução do controle social e os impactos da atividade do CACS diante do que a legislação outorga-lhe como prerrogativas. O campo da pesquisa é a Região Metropolitana de Campina Grande, no Estado da Paraíba, e o marco temporal é o período compreendido entre os anos de 2010 a 2014. O exame realizado permitiu verificar que os Conselhos existem e são relativamente atuantes, mas padecem de limitações causadas pela sua dependência junto ao Poder Público, pelos vícios persistentes na eleição de seus membros, pela precariedade da formação inicial e continuada dos conselheiros e pelo escopo restrito das informações a que, obrigatoriamente, têm acesso. / This study conducts an analysis of the performance of the main Municipal Social Control Councils (CACS) of education financing policy in Brazil: the Fund for the Development of Basic Education and the Magisterium of the Professional Valuation – FUNDEB. The main objective is to investigate the degree of contribution of these councils - which have representation from various sectors linked to education and also its main beneficiaries - for the fulfillment of the purposes of educational funding, with reference to the municipal administration. Were analyzed the organizational structure, operating rules, the means for the implementation of social control and the impact of the Council's activity before the law grants you as prerogatives. The field of research is the metropolitan area of Campina Grande, in the state of Paraiba, and the timeframe is the period between the years 2010-2014. The examination has shown that the Councils exist and are relatively active, but suffer from limitations caused by their dependence on the government, the persistent flaws in the election of your members, the precariousness of initial and continuing training of counselors and the restricted scope of the information must have access.

Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第16855号 / 工博第3576号 / 新制||工||1540(附属図書館) / 29530 / 京都大学大学院工学研究科電気工学専攻 / (主査)教授 引原 隆士, 教授 木本 恒暢, 教授 小野寺 秀俊 / 学位規則第4条第1項該当

M.Ing. / The increase in awareness of the environmental problems resulting from emissions released from vehicles have forced governments and car manufactures to invest more time in to the designing a vehicle that is an alternative to petrol driven vehicles. This dissertation aims to introduce a control strategy to manage the flow of energy of different power sources that may be found on a vehicle. Hybrid vehicles are a possible solution to reducing carbon emissions that play a part in global warming. In this dissertation, di erent hybrid vehicles are de ned and their components discussed in detail. The possibility of more than one energy source to power the vehicle introduces more exibility in terms of the drivetrain but this increases the complexity of the energy control management. The goal is to optimize the energy control management to reduce fuel consumption and therefore reduce emissions. Operating procedures for the various hybrid con gurations are discussed. Simulations of the Energy Management System of the hybrid electric vehicle are used to develop the control optimization algorithm. Various control optimization procedures are discussed. Satisfactory results from the simulations allow the implementation of the hybrid onto a platform entered into the South African Solar Challenge 2010, which covered a distance of 4000 km. The Energy Management system selected for the parallel hybrid electric vehicle demonstrated fuel savings, which meant a reduction in emissions, which is the goal of any hybrid vehicle. Further investigations include more intelligent controllers to adjust the parameters of the energy management controller to allow for adaptation to various driving conditions, e.g. urban and motorway driving.

Depuis les scandales financiers notamment d’Enron, Worldcom, Vivendi et Parmalat, la transparence est au cœur de tous les débats dès que la situation l'exige. Ainsi, tout le monde appelle à la transparence. Cette invocation est partagée par des politiciens, des avocats, des économistes, des financiers et l'opinion publique. Ainsi transparence souhaité par tous et qui correspond à la quantité d'informations diffusées par les entreprises, est devenu l'instrument privilégié de la régulation des marchés financiers. De nombreux pays occidentaux ont adopté des lois pour garantir la sécurité des marchés et des investisseurs. En France, il existe des lois comme la loi sur les Nouvelles Régulations Economiques (NRE) de 2001, la loi sur La Sécurité Financière (LSF) de 2003 et la loi Breton de 2005. Au niveau européen, il existe aussi des lois et les plus importantes sont la Directive Transparence de 2013, sur l'harmonisation des obligations de transparence concernant à l'information sur les émetteurs dont les valeurs mobilières sont admises à la négociation sur un marché réglementé, Directive concernant les Marchés d’Instruments Financiers (MiFID) 2014, la directive Abus de Marché (MAD) de 2014 et European Market Infrastructure Regulation (EMIR) de 2012. Cependant au sein des sociétés, on assiste à une instrumentalisation de l’information, orchestrant des « guerres » entre dirigeants et actionnaires. La transparence est ainsi détournée de son rôle premier pour satisfaire les intérêts égoïstes de ces personnes. Grâce à une manipulation de l’information dont il est dépositaire, le dirigeant peut mettre en place des stratégies dans le but de conserver son fauteuil. Les actionnaires dépositaires du contrôle de la société, peuvent opérer un contrôle purement économique, et n’agiront pas dans l’intérêt de la société mais dans leur intérêt patrimonial, en fonction d’une stratégie de création de valeur et d’investissement préalablement arrêtée. / Since financial scandals including Enron, Worldcom, Vivendi and Parmalat, transparency is at the heart of all discussions as soon as the situation requires. Thus, everyone calls for transparency. This invocation is shared by politicians, lawyers, economists, financiers and public opinion. Thus the transparency desired by all and which corresponds to the amount of information published by companies, became the privileged instrument of regulation of financial markets. Many Western countries have adopted laws to guarantee the safety of the markets and investors. In France, there are laws such as Act New Regulations Economic (NRE) of 2001, the Law on Security Finance (LSF) of 2003 and 2005 Breton law. A European level, there are also laws and the most important are the 2013 Transparency Directive, on harmonization of the transparency requirements for information about issuers whose securities are admitted to trading on a regulated market, Directive concerning the markets in Financial Instruments (MiFID) of 2014, Market Abuse Directive Abuse (MAD) of 2014 and 2012 European Market Infrastructure Regulation (EMIR). However within societies, there is a manipulation of information, orchestrating “wars” between officers and shareholders. Transparency is thus diverted from its role as first to satisfy the selfish interest of these persons. Through the manipulation of information which he is the depositary, the leader can implement policies ti keep his chair. The custodians of the control of the company shareholders, can operate a purely economic control, and will not act in the interest of society but in their heritage interest, based on a previously stopped creating value and investment strategy.

Connected and Autonomous Vehicles (CAVs) benefit from both connectivity between vehicles and city infrastructures and automation of vehicles. In this respect, CAVs can improve safety and reduce traffic congestion and environmental impacts of daily commutes through making collaborative decisions. This dissertation studies how to reduce the energy consumption of vehicles and traffic congestion by making high-level routing decisions of CAVs. The first half of this dissertation considers the problem of eco-routing (finding the energy-optimal route) for Plug-In Hybrid Electric Vehicles (PHEVs) to minimize the overall energy consumption cost. Several algorithms are proposed that can simultaneously calculate an energy-optimal route (eco-route) for a PHEV and an optimal power-train control strategy over this route. The results show significant energy savings for PHEVs with a near real-time execution time for the algorithms. The second half of this dissertation tackles the problem of routing for fleets of CAVs in the presence of mixed traffic (coexistence of regular vehicles and CAVs). In this setting, all CAVs belong to the same fleet and can be routed using a centralized controller. The routing objective is to minimize a given overall fleet traveling cost (travel time or energy consumption). It is assumed that regular vehicles (non-CAVs) choose their routing decisions selfishly to minimize their traveling time. A framework is proposed that deals with the routing interaction between CAVs and regular uncontrolled vehicles under different penetration rates (fractions) of CAVs. The results suggest collaborative routing decisions of CAVs improve not only the cost of CAVs but also that of the non-CAVs. This framework is further extended to consider congestion-aware route-planning policies for Autonomous Mobility-on-Demand (AMoD) systems, whereby a fleet of autonomous vehicles provides on-demand mobility under mixed traffic conditions. A network flow model is devised to optimize the AMoD routing and rebalancing strategies in a congestion-aware fashion by accounting for the endogenous impact of AMoD flows on travel time. The results suggest that for high levels of demand, pure AMoD travel can be detrimental due to the additional traffic stemming from its rebalancing flows, while the combination of AMoD with walking or micromobility options can significantly improve the overall system performance.

With rapid depletion of fossil fuels and increasing environmental concerns, the trend to capture renewable energy, especially through wind energy resources, is increasing. The doubly fed induction generator (DFIG) is the most widely used generator for wind energy conversion because of its various advantages over other types of generators. In a DFIG, the rotor is fed through back to back converters via slip rings. The converters enable the generation control. This control property can be used to support reliable operation of a grid network system. Interarea oscillation has been a major factor in limiting power transfers in interconnected power systems. Poorly damped modes can trigger oscillatory instability, potentially leading to cascading blackouts in such systems. We consider a two-area system where DFIG based wind generation is integrated with conventional synchronous generators. A simple controller is proposed for the DFIG to improve damping of interarca oscillations. To support the proposition, case studies are conducted in Matlab/Simulink. The effectiveness of the proposed controller is then analyzed by eigenvalue analysis and verified with time domain simulation results. The results show that a properly tuned controller can increase the damping of dominant oscillatory mode by nearly 5% while improving the area transfer by about 200 MW of wind power. The results further show that with the proposed control strategy, damping of dominant oscillatory mode increased by more than 10%. / North Dakota State University. Graduate School / North Dakota State University. Department of Electrical and Computer Engineering