No description available.

Hydrophobic membrane proteins perform a variety of important functions in the cell, but their structures are notoriously difficult to solve. Thus, new strategies to obtain crystals of membrane proteins for structure determination are critical. We aim to develop a toolbox of peptide specific single-chain antibody fragment chaperones engineered for hyper-crystallizability. These peptide sequences can be introduced into various regions of membrane proteins without interfering with protein function. The resulting protein-chaperone complex is expected to form a crystal lattice mediated by chaperone interactions. We have developed candidate scFv chaperone proteins binding hexa-histidine (His6) and EYMPME (EE) tags with improved biophysical features influencing crystallization propensity, including peptide affinity, stability and solubility. The scFv libraries were generated using a novel ligation-free technique, MegAnneal, allowing us to rapidly generate large libraries based on 3D5 scFv. We identified two candidate chaperones, 3D5/His_683, specific for His6 and 3D5/EE_48, specific for EE tags. Variants exhibit high solubility (up to 16.6 mg/ml) and nanomolar peptide affinities; complexes of 3D5/EE_48 with EE-tagged proteins were isolated by gel filtration. We have developed design rules for EE peptide placement at terminal, inter-domain or internal loop regions of the target protein to balance peptide accessibility for chaperone binding while retaining rigid protein-chaperone complexes suitable for crystallization. The 3D5/ His_683 crystallized in four different conditions, utilizing multiple space groups. The 3D5/EE_48 scFv was crystallized (3.1 Å), revealing a ~52 Å channel in the crystal lattice, which may accommodate a small peptide-tagged target protein. Our evolution experiments altered scFv surface residues, resulting in use of different crystallization contacts. Analysis of these crystal contacts and those used by crystallized 14B7 scFv variants, led us to postulate that lattice formation is driven by strong crystal contacts. To test this hypothesis, we introduced amino acid changes expected to reduce the affinity of the 3D5/EE_48 energetically dominant crystal contacts. This approach to crystal contact engineering may allow semi-rational control over lattice networks preferred by scFv chaperones. Co-crystallization trials with model proteins are on-going. These engineered scFvs represent a new class of chaperones that may eliminate the need for de novo identification of candidate chaperones from large antibody libraries. / text

The human retinoid X receptor alpha (hRXRalpha) is a member of the nuclear receptor super-family of ligand-activated transcription factors. The Doyle laboratory has previously engineered a variety of functional hRXRalpha variants that activate gene expression in response to synthetic ligands (LG335 and γ-oxo-1-pyrenebutyric acid), compounds that are poor activators of wild-type hRXRalpha. The variants generally no longer respond to the wild-type ligand 9-cis retinoic acid. To enable targeting of these engineered receptors to arbitrary DNA sequences, we developed a program, ESPSearch, for identifying short or specific sequences in DNA or protein. ESPSearch enables identification of combinations of known zinc finger motifs to target arbitrary genes, as well having several other applications. The ability to target any DNA sequence means that the engineered receptors can be directed to control any gene. The ligand binding, self-association, coactivator interactions, and unfolding properties of the ligand binding domain of wild-type hRXRalpha were characterized. Our expression and purification protocol improves upon existing methods, providing high purity protein in a single step with more than twice prior yields. A general fluorescence-based method for measuring ligand affinity with hRXRalpha was developed, and used to determine binding constants for the small molecules. The presence of a peptide containing the binding motif from coactivator proteins (LxxLL) differentially increased the affinity of the receptor for the ligands. Assays to determine the self-association give a Kd for the dimer-tetramer equilibrium of 35 µM. hRXRalpha was found to denature irreversibly when heated, but shifts in apparent Tm due to ligands correlates strongly with the ligand binding affinities. Our results clarify disparities in existing reports and provide a benchmark for comparison. Reliable analysis of our data led to the development of a computer program for rigorous, automated data fitting. Nine functional variants of hRXRalpha were characterized to probe correlations between biophysical properties and the observed functional activity of the receptors, which differ significantly from wild-type. Although the correlation between ligand binding affinity and melting temperature was strong for all variants, there was essentially no correlation between ligand binding and activation of the variants. The mutations, which are all contained within the binding pocket, have significant long-range effects on the protein, causing changes in ligand-LxxLL interactions and oligomerization of the variants. Experimental and computational analysis of selected mutations suggests that they are highly coupled, complicating protein design. However, the large variation in properties amongst the variants also suggests that hRXRalpha can be mutated extensively while still retaining function. The long-range impact of binding pocket mutations will need to be taken into account in future engineering projects, as hRXRalpha is a flexible, dynamic protein.

Combinatorial protein engineering, taking advantage of large libraries of protein variants and powerful selection technology, is a useful strategy for developing affinity proteins for applications in biotechnology and medicine. In this thesis, two small affinity proteins have been subjected to combinatorial protein engineering to improve or redirect the binding. In two of the projects, a three-helix protein domain based on staphylococcal protein A has been used as scaffold to generate so called Affibody molecules capable of binding to key proteins related to two diseases common among elderly people. In the first project, Affibody molecules were selected using phage display technology for binding to Ab-peptides, believed to play a crucial role in Alzheimer’s disease, in that they can oligomerize and contribute to the formation of neural plaques in the brain. The selected Affibody molecules were found to efficiently capture Ab from spiked human plasma when coupled to an affinity resin. The structure of the complex was determined by nuclear magnetic resonance (NMR) and demonstrated that the original helix 1 in the two Affibody molecules was unfolded upon binding, forming intermolecular b-sheets that stabilized the Ab peptide as buried in a tunnel-like cavity. Interestingly, the complex structure also revealed that the Affibody molecules were found to homo-dimerize via a disulfide bridge and bind monomeric Ab-peptide with a 2:1 stoichiometry. Furthermore, Affibody molecule-mediated inhibition of Ab fibrillation in vitro, suggested a potential of selected binders for future therapeutic applications. In the second project, two different selection systems were used to isolate Affibody molecules binding to tumor necrosis factor alpha (TNF), which is involved in inflammatory diseases such as rheumatoid arthritis. Both selection systems, phage display and Gram-positive bacterial display, could successfully generate TNF-binding molecules, with equilibrium dissociation constants (KD) in the picomolar to nanomolar range. Initial characterization of the binding to TNF was evaluated by competitive binding studies between the Affibody molecules and clinically approved TNF antagonists (adaliumumab, infliximab and etanercept) and demonstrated overlapping binding sites with both adaliumumab and etanercept. Furthermore, linkers of different lengths were introduced between Affibody moieties, in dimeric and trimeric constructs that were evaluated for their ability to block the binding between TNF and a recombinant form of its receptor. In the dimeric constructs, a linker length of 20-40 amino acids seemed to have an advantage compared to shorter and longer linkers, and the tested trimeric construct could block the TNF binding at even lower concentration. The results provided valuable information for the design of future Affibody-based molecules that could be investigated in therapeutic or medical imaging applications. In the third project aiming to generate a protein domain with capacity to influence the pharmacokinetics of protein therapeutics, a natural serum albumin-binding domain (ABD) was subjected to an engineering effort aiming at improving the affinity to human serum albumin (HSA), a protein with an exceptional long half-life in serum (19 days). First-generation affinity improved ABD variants were selected using phage display technology from a constructed ABD library. After additional rational engineering of such first generation variants, one variant with a 10,000-fold improved affinity to HSA (KD ≈ 120 fM) was obtained. Furthermore, characterization of this molecule also demonstrated improved affinity to several other serum albumins. When used as a gene fusion partner, this affinity-maturated variant denoted ABD035, should have the potential to extend the half-life of biopharmaceuticals in humans, and several other animal species. / QC 20100722

The structural determination of interacting proteins, both as individual proteins and in their complex, complemented by thermodynamical studies are vital in order to gain in-depth insights of the phenomena leading to the highly selective protein-protein interactions characteristic of numerous life processes. This thesis describes an investigation of the structural and thermodynamical basis for molecular recognition in two different protein-protein complexes, formed between so-called affibody proteins and their respective targets. Affibody proteins are a class of engineered binding proteins, which can be functionally selected for binding to a given target protein from large collections (libraries) constructed via combinatorial engineering of 13 surface-located positions of the 58-residue three-helix bundle Z domain derived from Staphylococcal protein (SPA). In a first study, an affibody:target protein pair consisting of the ZSPA-1 affibody and the parental Z domain, with a dissociation constant (Kd) of approximately 1 µM, was investigated. ZSPA-1 was in its free state shown to display molten globule-like characteristics. The enthalpy change on binding between Z and ZSPA-1 as measured by isothermal titration calorimetry, was found to be a non-linear function of temperature. This nonlinearity was found to be due to the temperature dependent folded-unfolded equilibrium of ZSPA-1 upon binding to the Z domain and, the energetics of the unfolding equilibrium of the molten globule state of ZSPA-1 could be separated from the binding thermodynamics. Further dissection of the binding entropy revealed that a significant reduction in conformational entropy resulting from the stabilization of the molten globule state of ZSPA-1 upon complex formation could be a major reason for the moderate binding affinity. A second studied affibody:target complex (Kd ~ 0.1 µM) consisted of the ZTaq affibody protein originally selected for binding to Taq DNA polymerase and the anti-ZTaq affibody protein, selected for selective binding to the ZTaq affibody protein, thus constituting an "anti-idiotypic" affinity protein pair. The structure of the ZTaq:anti-ZTaq affibody complex as well as the free state structures of ZTaq and anti-ZTaq were determined using NMR spectroscopy. Both ZTaq and anti-ZTaq are well defined three helix bundles in their free state and do not display the same molten globule-like behaviour of ZSPA-1. The interaction surface was found to involve all of the varied positions in helices 1 and 2 of the anti-ZTaq, the majority of the corresponding side chains in ZTaq, and also several non-mutated residues. The total buried surface area was determined to about 1670 Å2 which is well inside the range of what is typical for many protein-protein complexes, including antibody:antigen complexes. Structural rearrangements, primarily at the side chain level, were observed to take place upon binding. There are similarities between the ZTaq:anti-ZTaq and the Z:ZSPA-1 structure, for instance, the binding interface area in both complexes has a large fraction of non-polar content, the buried surface area is of similar size, and certain residues have the same positioning. However, the relative orientation between the subunits in ZTaq:anti-ZTaq is markedly different from that observed in Z:ZSPA-1. The thermodynamics of ZTaq:anti-ZTaq association were investigated by isothermal titration calorimetry. A dissection of the entropic contributions showed that a large and favourable desolvation entropy of non-polar surface is associated with the binding reaction which is in good agreement with hydrophobic nature of the binding interface, but as in the case for the Z:ZSPA-1 complex a significant loss in conformational entropy opposes complex formation. A comparison with complexes involving affibody proteins or SPA domains suggests that affibody proteins inherit intrinsic binding properties from the original SPA surface. The structural and biophysical data suggest that although extensive mutations are carried out in the Z domain to obtain affibody proteins, this does not necessarily affect the structural integrity or lead to a significant destabilization. / QC 20110118

La détermination de la structure des protéines à une résolution atomique est cruciale pour la compréhension de leur fonction cellulaire. Actuellement, la cristallographie aux rayons X est la méthode la plus efficace pour la détermination à haute résolution de la structure de protéines monomériques allant 40 et 100 kDa. Par contre, elle est limitée par la croissance de cristaux de bonne qualité, qui est problématique pour nombreuses cibles. La cryo-microscopie électronique (cryoME) permet la détermination structurale à résolution quasi-atomique de larges structures protéiques, de préférence symétrique et en solution. Cependant, les images de cryoME sont très bruitées, car une faible dose d'électrons est appliquée de manière à limiter les dommages d'irradiation. En moyennant des dizaines d'images correspondant à la même orientation moléculaire, le rapport signal sur bruit est amélioré. La combinaison des images moyennées de plusieurs orientations permet l'obtention d'une carte de densité électronique 3D de la molécule d'intérêt. Si la taille et la symétrie de la molécule diminuent, l'analyse cryoME devient de moins en moins précise, il est alors impossible d'analyser des protéines monomériques de taille inférieure à 100 kDa. Le but de ce travail a été de développer une nouvelle approche pour réduire cette limite de poids moléculaire. Elle consiste à fusionner la protéine d'intérêt (cible) à une matrice homo-oligomérique, générant une particule symétrique et de taille importante adaptée à l'analyse par cryoME. Dans cette thèse, nous avons cherché à tester et démontrer la faisabilité de cette approche de symétrisation en utilisant des protéines cibles de structure connue.Pour mettre en place notre étude pilote, nous avons choisi différentes combinaisons de cibles et de matrices connectées par des peptides de liaison (linker) de longueur différentes. Nous avons caractérisé les fusions exprimées en bactéries par microscopie électronique après coloration négative et par plusieurs techniques biophysiques. Grace à ces techniques, nous avons trouvé que la meilleure combinaison est la fusion entre la protéine matrice glutamine synthétase (GS), un 12-mer de symétrie D6 et la cible maltose binding protein (Mbp), connectées par un linker contenant trois alanines, que nous avons appelée « Mag ». En jouant sur la longueur du linker nous avons ensuite sélectionné la fusion la plus compacte pour l'analyse cryoME: MagΔ5. Nous avons obtenu la carte cryoME à 10 Å de MagΔ5, qui présente une bonne corrélation avec les modèles atomiques de Mbp et GS. Plus particulièrement, le site catalytique et quelques hélices α sont identifiables. Ces résultats sont confirmés par l'étude cristallographique que nous avons conduite sur MagΔ5. L'ensemble de ce travail souligne que la présence d'une grande interface d'interactions cible-matrice stabilise la fusion et améliore la résolution en cryoME. Pour la symétrisation d'une cible inconnue, nous envisageons la même procédure expérimentale que celle développée pour MagΔ5. La matrice et le linker les plus adaptés devront être identifiés en utilisant les mêmes méthodes biophysiques.En conclusion, ce travail établit la preuve de concept que la méthode de symétrisation des protéines permet la détermination de la structure de protéines de poids moléculaire inférieur à 100 kDa par cryoME. Cette méthode a le potentiel d'être un nouvel outil prometteur, qui faciliterait l'analyse de cibles résistantes à l'analyse structurale conventionnelle. / Structural determination of proteins at atomic level resolution is crucial for unravelling their function. X-ray crystallography has successfully been used to determine macromolecular structures with sizes ranging from kDa to MDa, and currently remains the most efficient method for the high-resolution structure determination of monomeric proteins within the 40-100 kDa range. However, this method is limited by the ability to grow well diffracting crystals, which is problematic for several targets, such as membrane proteins. Single particle cryo electron microscopy (cryoEM) allows near atomic (3-4Å) resolution structural determination of large, preferably symmetric, assemblies in solution. Biological molecules scatter electrons weakly and, to avoid radiation damage, only low electron doses can be used during imaging. Consequently, raw cryoEM images are extremely noisy. However, averaging many molecular images aligned in the same orientation permits one to increase the signal-to-noise ratio, ultimately allowing the achievement of a 3D density map of the molecule of interest. Nevertheless, as the molecular size and degree of symmetry decrease, the individual images loose adequate features for accurate alignment. Currently, cryoEM analysis is practically impossible for monomeric proteins below ~100 kDa in mass. We propose to circumvent this obstacle by fusing such monomeric target proteins to a homo-oligomeric protein (template), thereby generating a self-assembling particle whose large size and symmetry should facilitate cryoEM analysis. In the present thesis we seek to test and demonstrate the feasibility of this ‘protein symmetrization' approach and to evaluate its usefulness for protein structure determination. To set up the pilot study we combined selected targets of known structure with two templates: Glutamine Synthetase (GS), a 12-mer with D6 symmetry and a helical N-terminus, and the E2 subunit of the pyruvate dehydrogenase complex, a 60-mer with icosahedral symmetry and an unstructured N-terminus. After recombinant production in E.coli we identified by negative stain EM a promising dodecameric chimera for structural analysis, comprising maltose binding protein (Mbp) connected to GS by a tri-alanine linker (denoted “Mag”). In order to optimize sample homogeneity we produced a panel of Mag deletion constructs by sequentially truncating the 17 residues between the Mbp and GS domains. A combination of biophysical techniques (thermal shift assay, dynamic light scattering, size exclusion chromatography) and negative stain EM allowed us to select the best candidate for cryoEM analysis, MagΔ5. By enforcing D6 symmetry we obtained a cryoEM map with a resolution of 10Å (FSC 0.5 criterion). The density of the symmetrized 40 kDa Mbp presents shape and features corresponding to the known atomic structure. In particular, the catalytic pocket and specific α-helical elements are distinguishable. The cryoEM map is additionally validated by a 7Å crystal structure of the MagΔ5 oligomer. The presence of a continuous helical connection between target (Mbp) and template (GS) likely contributed to the conformational homogeneity of MagΔ5. Moreover, comparing MagΔ5 with other chimeras studied in this work suggests that a large buried surface area and favorable interactions between the target and template limit the flexibility of the chimera and improve its resolution by cryoEM. For the symmetrization of a target of unknown structure, we envisage proceeding by a trial and error approach by fusing it to a panel of templates with helical termini and different surface properties, and subsequently selecting the best ones using biophysical assays. In conclusion, the present work establishes the proof-of-concept that protein symmetrization can be used for the structure determination of monomeric proteins below 100 kDa by cryoEM, thereby providing a promising new tool for analyzing targets resistant to conventional structural analysis.

Les lipases/acyltransférases homologues à CpLIP2 de Candida parapsilosis forment un groupe phylogénétique marqué (au moins 56% d’identité entre les séquences protéiques) . Elles partagent le phénotype d’une activité significative d’acyltransfert, et ce, même dans un milieu aqueux avec une forte activité thermodynamique de l’eau (aW > 0.95), mais diffèrent dans leurs spécificités de substrats. L’identification et la caractérisation de nouvelles lipases/acyltransférases, CalLAc8 et CalLAc5 de Candida albicans et CduLAc de Candida dublininensis, ont apporté de nouveaux éclaircissements sur les relations structure/fonction au sein de cette famille particulière. Dans un premier temps, une définition claire et une méthodologie simple pour évaluer la capacité des enzymes lipolytiques à catalyser l’acyltransfert ont été élaborées. Puis, une stratégie d’ingénierie des protéines, basée sur une analyse comparative des structures 3D et de la mutagénèse dirigée, a été appliquée dans le but d’identifier les déterminants structuraux impliqués dans l’activité d’acyltransfert et la spécificité de substrat des lipases/acyltransférases. Il a été démontré que le caractère hydrophobe d’une cavité située sous le site actif était déterminant pour l’activité de transfert en favorisant les nucléophiles moins polaires que l’eau dans l’étape de désacylation du mécanisme catalytique. Ainsi, des mutants améliorés de plusieurs enzymes sauvages ont pu être élaborés. En parallèle, des enzymes chimériques ont été construites sur la base d’échanges rationnels de sous-domaines (corps principal, chapeau et volet C-terminal). Leur caractérisation a confirmé le rôle du chapeau dans la spécificité de substrat et le rôle principal de « l’acyltransfer pocket » dans la capacité d’acyltransfert. Une potentielle protéine ancestrale de la famille PaleoLAc a également été conçue pour trouver de nouveaux résidus clés et donner un aperçu de l’histoire évolutive de la spécificité de substrats. / Lipases/acyltransferases homologous to CpLIP2 from Candida parapsilosis constitute a consistent phylogenetic subgroup with at least 56% identity. They share the phenotype of a significant acyltransfer activity, even in aqueous media with a high thermodynamic activity of water (aW > 0.95), but are divergent in their substrate specificities. The identification and the characterization of new lipases/acyltransferases, CalLAc8 and CalLAc5 from Candida albicans and CduLAc from Candida dublininensis, brought new enlightenments to the structure/function relationships in this peculiar family. After the elaboration of a clear definition and a simple methodology to assess the acyltransferase character of lipolytic enzymes, a rational design strategy, based on comparative 3D structure analysis and site-directed mutagenesis, was applied to find structural determinants of the acyltransfer ability and the substrate specificities of lipases/acyltransferases. It was evidenced that the hydrophobicity of a cavity located under the active site was determinant for the acyltransfer activity. This allowed the improvement of the acyltransfer activity of several natural enzymes. In parallel, chimeric enzymes with rational exchanges of protein subdomains (main core, cap and C-term flap) were designed, and their characterization confirmed the role of the cap in the substrates specificity and the main role of the acyltransfer pocket in the acyltransfer ability. A putative ancestral protein of the family PaleoLAc was also designed to find new key residues and to give insights on the evolutionary history of the substrate specificities.

No description available.

No description available.

Mycolic acids are long chain lipids from the cell walls of Mycobacterium tuberculosis. The Nkuku phage display library was previously used to obtain monoclonal antibody binders to mycolic acids. In total 11 binders were obtained of which one was selected (MAC10) for further investigation by genetic engineering as presented in this dissertation. The antibodies of the Nkuku phage display library are in the format of single chain variable fragments (scFv). ScFv’s constitute only the epitope binding domains of an antibody consisting of the VH and VL domains fused into a single chain by a flexible linker protein. The selected anti-mycolic acid scFv is referred to as mycolic acid clone 10 (MAC10). Genes encoding the scFv’s of the Nkuku phage display library were cloned into the plasmid pHEN-1, a phage display vector. This vector is not commercially available or ideally suited for expression of scFv proteins. Therefore two vectors were investigated as possible targets for subcloning. The plasmids pGE20 and pAK400 were previously used for the expression of scFv antibody proteins. Subcloning into plasmid pAK400 proved to be the more efficient of the two investigated for subcloning. This subcloning yielded the recombinant plasmid pAKJS. Following the subcloning scFv protein expression was attempted using the plasmids pMAC10 (derived from pHEN-1) and pAKJS (derived from pAK400). Expression of MAC10 using plasmid pMAC10 in both Escherichia coli TG-1 and HB2151 was constitutive. This demonstrates that plasmid pHEN-1 is a non ideal vector as expression should not occur unless induced. Expression of MAC10 did not occur when pAKJS and Escherichia coli HB2151 were used. This was due to both the vector and expression host producing inhibitor protein for the Lac Z promoter controlling expression of the scFv. The MAC10 gene was subsequently randomized using the directed evolution method, error prone PCR. Sequence analysis of the five selected mutants indicated an average mutation rate of 8.6 mutations per 1000 base pairs. From the combined total of all five mutants, transversions made up the majority of substitutions. The majority of transversion mutations occurred at A-T base pairs. Transition substation mutations that made up the minority of total mutations occurred mostly at G-C base pairs. / Dissertation (MSc)--University of Pretoria, 2012. / Biochemistry / unrestricted