In this thesis, the main investigation is focused on the design and fabrication of Re-distribution(RDL) in Wafer Level Chip Scale Package(WLCSP). As bumping process capability becoming more and more popular, WLCSP will be the main package trend for IC with lower pin count. Due to the high performance analog devices should be met more restricted requirements for electrical conductivity and higher electrical current passing by, hence the thick plating Cu is chosen for RDL and under bump metallization(UBM) for WLCSP package to meet both electrical and reliability requirements. The experiments discussed herein include: photo exposure DOE, adhesion DOE between 2ND PI and RDL and contact resistance DOE after post etching treatment. From the DOE results, we obtain the results as follows: The exposure dosage optimized by using 1.5X original parameter that can fix the photo resist residue problem. The key to the adhesion between PI2 and RDL is the curing temperature. Lower curing temperature 375¢J/320¢J provides better adhesion. O2/ CF4 treatments effectively increase contact resistance. However, O2/Ar¡BAr and O2 work much better than O2/ CF4 in increasing the contact resistance after surface treatment. The completion of this study could give some suggestions to the manufacturers of application of RDL WLCSP, furthermore, it shorten the development period to enhance the mechanical and electrical performances of products.

Muscarinic acetylcholine receptors (mAChRs) are G-protein-coupled receptors that are underutilized for controlling insect pests despite their involvement in various physiological functions. To-date, there are no commercialized insecticides targeting insect mAChRs. In this dissertation, effective target-site synergism was demonstrated in susceptible Drosophila melanogaster where mAChR agonism by pilocarpine enhanced the toxicity of insecticides targeting gamma-aminobutyric acid (GABA)-gated chloride channels, indicating the potential of insect mAChRs as a target for developing novel insecticides/synergists to control resistant pests. A point mutation (A301S) in the GABA-gated chloride channel confers resistance to dieldrin (Rdl), lindane, and fipronil, which I have confirmed using different routes of exposure. However, the same synergistic effect was not achieved in the resistant strain with the presence of this target-site mutation. This difference between two strains is perplexing because there is a change in the efficacy of several compound classes that do not directly act upon GABA-gated chloride channels. Specifically, a point mutation appears to influence how the insect central nervous system (CNS) responds to muscarinic compounds, type I pyrethroids, and acetylcholinesterase (AChE) inhibitors. In the case of acetylcholinesterase, the resistant insect increases the expression of Ace gene encoding this enzyme. Fully understanding how the CNS responds to receptor modifications is not well understood and could have a significant impact to pest management strategies. / Doctor of Philosophy / Insects significantly influence the food production, health, and the economy of the human world. Control of insect pest outbreaks relies on the proper use of insecticides. However, extensive application of insecticides has resulted in pests being able to adapt to these compounds, through insecticide resistance. Ultimately, this will affect currently used pest management strategies. To help alleviate this urgent problem, my dissertation provided an alternative strategy to control pests, which is to use a mixture of two molecules that influence different targets in the insect nervous system that could reduce the use of toxic or deleterious compounds that are the active ingredients. It is important to not solely rely on current insecticides on the market and find new insecticides that work differently. I used the fruit fly to help me understand how insecticide mixtures would work, but also understand how the complex nature of insect adaptations at the level of the nervous system continues to threaten pest management. Based on studies that were performed here, we now have a better understanding on how to investigate the failure of insecticides in the field, which will ultimately help us make new molecules.

Les récepteurs ionotropes du GABA (GABARs) sont inhibés par des insecticides tels que les phénylpyrazoles (fipronil). Deux facteurs susceptibles de modifier leur sensibilité au fipronil ont été examinés : 1) l'édition de l'ARNm d'une sous-unité de GABAR (RDL) et 2) la phosphorylation par la PKC. La sous-unité RDL de drosophile présente des mutations (A301êS/G et/ou T350êM) induisant une résistance aux insecticides, ainsi que des sites d'édition dont un dans le domaine N-terminal (R122êG). Les effets fonctionnels de l'édition R122êG ont été testés par expression de divers isoformes de la sous-unité RDL (mutés ou non, édités ou non) dans des ovocytes de xénope. Les résultats montrent que l'édition R122êG entraîne une réduction de la sensibilité des récepteurs RDL au GABA et au fipronil. Deux types de récepteurs (GABAR1 et GABAR2) sont exprimés à la surface des neurones DUM isolés de Periplaneta americana, les GABAR2 étant régulés positivement par la CaMKII. Ce modèle cellulaire a été utilisé pour étudier, par la technique du patch-clamp, la régulation des GABARs par la PKC et ses conséquences sur les effets du fipronil. Les GABAR2 apparaissent plus sensibles à l'inhibition par des PKC que les GABAR1, et la potentialisation de l'activité des GABAR2 par la CaMKII s'exerce via l'inhibition d'une PKC. Les GABAR2 étant plus sensibles au fipronil que les GABAR1, leur blocage sélectif par une PKC entraîne une réduction importante de l'inhibition exercée par le fipronil. Le clonage de la sous-unité RDL dans la chaîne nerveuse de la blatte et dans les neurones DUM révèle la présence de sites potentiels de phosphorylation par la PKC et la CaMKII ainsi que l'existence de deux variants différant par vingt résidus dans la boucle M3-M4.

Les innovations actuelles en électronique allient à la fois des critères de coût, de performance et de taille. Or à l'ère du tout numérique, les technologies CMOS sont confrontées à la stagnation de leurs performances électriques. Parallèlement, les systèmes hétérogènes multifonctions s'orientent vers une complexification extrême de leurs architectures, augmentant leur coût de conception. Les problématiques de performance électrique et d'hétérogénéité convergent vers un objectif commun. Une solution industriellement viable pour atteindre cet objectif d'architecture ultime est l'intégration tridimensionnelle de circuits intégrés. En empilant verticalement des circuits classiques aux fonctionnalités diverses, cette architecture ouvre la voie à des systèmes multifonctions miniaturisés dont les performances électriques sont meilleures que l'existant. Néanmoins, les technologies CMOS ne sont pas conçues pour être intégrées dans une architecture 3D. Cette thèse de doctorat s'intéresse à évaluer toute forme d'impact engendré par les technologies d'intégration 3D sur les performances électriques des composants CMOS. Ces impacts sont classifiés en deux familles d'origine thermomécanique et électrique. Une étude exploratoire réalisée par modélisation TCAD a permis de montrer l'existence d'un couplage électrique par le substrat provoqué par les structures d'intégration 3D dont l'influence s'avère non négligeable pour les technologies CMOS. La seconde partie de l'étude porte sur la mise en œuvre et le test de circuits conçus pour quantifier ces phénomènes d'interaction thermomécanique et électrique, et leur impact sur les performances de transistors et d'oscillateurs en anneau.

L'intégration tridimensionnels (3D) ont été couronnés de succès dans les dispositifs traditionnels pour augmenter la densité logique et réduire les distances de mouvement des données. Il résout les limites fondamentales de la mise à l'échelle, par ex. retard croissant dans les interconnexions, les coûts de développement et la variabilité. La plupart des périphériques de mémoire livrés aujourd'hui comportent une forme d'empilage de puce. Mais en raison des limites de dissipation de puissance des circuits intégrés, la fréquence de fonctionnement du MPU d'aujourd'hui a été limitée à quelques GHz. Le but de la thèse est de fournir une méthode de conception globale pour le circuit intégré 3D dans le domaine électrique, thermique, électrothermique et aussi le bruit. À cette fin, la question de recherche est la suivante: Comment réaliser la conception 3D IC, comment gérer VLS 3D IC et comment résoudre les problèmes thermiques dans le CI 3D. Dans ce contexte, les méthodes de simulation pour le substrat et également la connectivité relative (TSV, RDL, Micro strip et circuits intégrés dans le substrat) sont proposées. Afin de satisfaire la demande de recherche, un 3D-TLE et une impédance de substrat sont programmés dans Matlab, qui peut automatiquement extraire de tous les contacts; impédance, de forme arbitraire et de matière arbitraire. L'extracteur est compatible à 100% avec le simulateur de cœur SPICE et vérifié avec les résultats de mesure et les résultats de simulation FEM. Et comme pour une démo, une fréquence de 26 GHz et un filtre RF de bande passante 2GHz sont proposés dans ce travail. Un autre simulateur électrothermique est également programmé et vérifié avec ADS. En tant que solution à la dissipation thermique locale, le caloduc plat est proposé comme composant potentiel. Le modèle caloduc est vérifié avec une simulation FEM. La méthode d'analyse du bruit des substrats et les méthodes de calcul de électriques et thermo-mécanique KOZ sont également présentées. / Three Dimensional (3D) Integration and Packaging has been successful in mainstream devices to increase logic density and to reduce data movement distances. It solves the fundamental limits of scaling e.g. increasing delay in interconnections, development costs and variability. Most memory devices shipped today have some form of chip-stacking involved. But because of the power dissipation limits of ICs, today’s MPU’s operating frequency has been limited to a few GHz. The aim of the thesis is to provide a global design method for the 3D integrated circuit in electrical, thermal, electro-thermal and also noise field. To this end, the research question is as follows: How to realize the 3D IC design, how to manage VLS 3D IC and how to solve the thermal issues in the 3D IC. In this context, the simulation methods for substrate and also relative connectivity (TSV, RDL, Micro strip and circuits embedded into the substrate) are proposed. In order to satisfy the research demand, a 3D-TLE and a substrate impedance are programmed in Matlab, which can automatically extract from any contacts; impedance, of arbitrary shape and arbitrary material. The extractor is 100% compatible with SPICE core simulator, and verified with measurement results and FEM simulation results. And as for a demo, a 26 GHz frequency and 2GHz bandwidth RF filter is propose in this work. Another electro-thermal simulator is also programmed and verified with ADS. As a solution to the local heat dissipation, flat heat pipe (FHP) is proposed as a prospective component. The heat-pipe model is verified with FEM simulation. The substrates noise analysis method and electrical and thermos-mechanical keep-out-of-zone (KOZ) calculation methods are also presented.

Em contraposição ao avanço do desmatamento da floresta amazônica em São Félix do Xingu - PA, principalmente pela atividade pecuária, diversas inciativas vêm estimulando a recuperação de áreas degradadas (RAD) por meio da implantação de sistemas agroflorestais com cacau (Theobroma cacao L.) (SAF-cacau). A fim de estudar o potencial SAF-cacau como ferramenta de RAD nesta região, conduzi a pesquisa em quatro hipóteses principais: (1) recupera parcialmente a estrutura florestal; (2) recupera parcialmente a riqueza/diversidade de plantas; (3) recupera a fertilidade do solo; (4) recupera a riqueza/diversidade de grupos de macroinvertebrados do solo. Para tanto, agrupei os SAF\'s em três categorias de sombreamento: sombra inicial (SI), sombra secundária (SS) e sombra abandonada (A), analisando-as comparativamente com Floresta e Pasto. Em paralelo, realizei entrevista socioeconômica e ambiental, pautada na percepção dos produtores rurais, a fim de contextualizar as ações humanas com os usos do solo em estudo. Os principais resultados mostram que os solos são semelhantes em termos de textura e fertilidade, independentemente da situação de uso. Os SAF-cacau são potenciais ferramentas de RAD em termos de estrutura florestal e diversidade florística, necessitando maiores estudos com relação à composição de plantas. A rentabilidade do SAF-cacau mostrou-se expressivamente superior à pecuária, por unidade de área, ocupando menor espaço territorial na propriedade, além de outros benefícios socioambientais, com destaque para provisão de serviços ambientais. / In contrast to the advance of the Amazon rainforest deforestation, mainly by cattle activity, in Sao Felix do Xingu - PA municipality, several initiatives have been stimulating the reclamation of degraded lands (RDL) through the implementation of agroforestry systems with cacao (Theobroma cacao L.) (cacao-AFS). Aiming to study the cacao-AFS as a potential tool to reclaim degraded lands in this region, I based the research in four main hypothesis: (1) it partially reclaims the forestry structure; (2) it partially reclaims the richness/diversity of plants; (3) it reclaims the soil fertility; (4) it reclaims the richness/diversity of soil macroinvertebrates. Thus, I grouped the AFS in three categories: initial shade (IS); secondary shade (SS); abandoned shade (A), comparing them with Forest and Pasture land uses. In parallel, I performed a socioeconomic and environmental interview, based on farmers perception, in order to contextualize the human actions in the studied the land uses. The main results showed similarity in soil\'s texture and fertility, regardless of use situation. The cocoa- AFS are potential tools of RAD in terms of forest structure and floristic diversity, requiring further studies regarding the composition of plants. The profitability of the cacao-AFS was found to be significantly higher than the cattle, per unit area, occupying less territorial space on the property, plus other social and environmental benefits, especially the provision of many environmental services.

Em contraposição ao avanço do desmatamento da floresta amazônica em São Félix do Xingu - PA, principalmente pela atividade pecuária, diversas inciativas vêm estimulando a recuperação de áreas degradadas (RAD) por meio da implantação de sistemas agroflorestais com cacau (Theobroma cacao L.) (SAF-cacau). A fim de estudar o potencial SAF-cacau como ferramenta de RAD nesta região, conduzi a pesquisa em quatro hipóteses principais: (1) recupera parcialmente a estrutura florestal; (2) recupera parcialmente a riqueza/diversidade de plantas; (3) recupera a fertilidade do solo; (4) recupera a riqueza/diversidade de grupos de macroinvertebrados do solo. Para tanto, agrupei os SAF\'s em três categorias de sombreamento: sombra inicial (SI), sombra secundária (SS) e sombra abandonada (A), analisando-as comparativamente com Floresta e Pasto. Em paralelo, realizei entrevista socioeconômica e ambiental, pautada na percepção dos produtores rurais, a fim de contextualizar as ações humanas com os usos do solo em estudo. Os principais resultados mostram que os solos são semelhantes em termos de textura e fertilidade, independentemente da situação de uso. Os SAF-cacau são potenciais ferramentas de RAD em termos de estrutura florestal e diversidade florística, necessitando maiores estudos com relação à composição de plantas. A rentabilidade do SAF-cacau mostrou-se expressivamente superior à pecuária, por unidade de área, ocupando menor espaço territorial na propriedade, além de outros benefícios socioambientais, com destaque para provisão de serviços ambientais. / In contrast to the advance of the Amazon rainforest deforestation, mainly by cattle activity, in Sao Felix do Xingu - PA municipality, several initiatives have been stimulating the reclamation of degraded lands (RDL) through the implementation of agroforestry systems with cacao (Theobroma cacao L.) (cacao-AFS). Aiming to study the cacao-AFS as a potential tool to reclaim degraded lands in this region, I based the research in four main hypothesis: (1) it partially reclaims the forestry structure; (2) it partially reclaims the richness/diversity of plants; (3) it reclaims the soil fertility; (4) it reclaims the richness/diversity of soil macroinvertebrates. Thus, I grouped the AFS in three categories: initial shade (IS); secondary shade (SS); abandoned shade (A), comparing them with Forest and Pasture land uses. In parallel, I performed a socioeconomic and environmental interview, based on farmers perception, in order to contextualize the human actions in the studied the land uses. The main results showed similarity in soil\'s texture and fertility, regardless of use situation. The cocoa- AFS are potential tools of RAD in terms of forest structure and floristic diversity, requiring further studies regarding the composition of plants. The profitability of the cacao-AFS was found to be significantly higher than the cattle, per unit area, occupying less territorial space on the property, plus other social and environmental benefits, especially the provision of many environmental services.

The growing demand for the Internet of Things (IoT) and Artificial Intelligence (AI) need high-speed commu-nication within short-range distances. In the Back-End-Of-Line (BEOL), Single-Mode Waveguide (SMW) with micro-mirror shows the promising application as an Optical Redistribution Layer (O-RDL) connecting photonic-chip at the interposer-level. The presented study shows the potential application of the 2-Photon-Polymerization (2PP) process for fabrication of out-of-plane coupling elements (micro-mirror) for SMW using low-loss Ormocer® hybrid polymers. This fabricated micro-mirror uses as a coupling element to connect the light from RDL to chips or for inter-layer connections at Interposer level. To evaluate the processing time, structural quality, and resolution of the printed micro-mirror, two types of lenses (63x and 25x) and Ormocer® polymers (OrmoComp and OrmoCore) were used. The optimization of the process flow for the micro-mirrors for SMW applications will be described in detail.