No description available.

No description available.

No description available.

Dizziness is a common, multifactorial problem that causes reductions in quality of life and is a major risk factor for falls, but the role of vision is a very under-researched area. This study aimed to investigate any link between dizziness and vision and to establish if changes in spectacle lens correction could elicit dizziness symptoms. A link between dizziness and self-reported poor vision was indicated in the epidemiological literature as shown by a systematic review, provided lightheadedness was not included in the definition of dizziness. Cases of individuals who reported vision-related dizziness were investigated to determine potential areas of research for this thesis and subsequently two studies investigated the effects of refractive correction changes on dizziness status. The first study was limited by logistical problems, although it highlighted limitations in the short form of the Dizziness Handicap Inventory that was used to quantify dizziness. Results of an optometry practice recheck study found that oblique cylindrical changes were significantly more likely to be associated with dizziness symptoms than other spectacle lens changes. It also highlighted that optometrists do not ask/record about dizziness symptoms with only 4% of records including “dizziness” as a problem when 38% of patients reported dizziness symptoms when directly asked. All studies highlighted a need for a patient-reported outcome measure to be designed to assess vision-related dizziness. Literature review, interviews with experts and patients and focus groups led to the development of a pilot questionnaire and subsequently a 25-item Vision-Related Dizziness instrument, the VRD-25. This was validated using responses from 223 respondents, with 79 participants completing the questionnaire a second time to provide test-retest data. Two subscales of VRD-12-frequency (VRD-12f) and VRD-13-severity (VRD-13s) were shown to be unidimensional and had good psychometric properties, convergent validity and test-retest repeatability. The VRD-25 is the only patient-reported outcome measure developed to date to assess vision related dizziness and will hopefully provide the platform to further grow this under-researched area that seems likely to provide important clinical information. / College of Optometrists sponsored the research with a Postgraduate Research Scholarship

Oxidation flow reactors (OFRs) using low-pressure Hg lamp emission at 185 and 254 nm produce OH radicals efficiently and are widely used in atmospheric chemistry and other fields. However, knowledge of detailed OFR chemistry is limited, allowing speculation in the literature about whether some non-OH reactants, including several not relevant for tropospheric chemistry, may play an important role in these OFRs. These non-OH reactants are UV radiation, O(¹D), O(³P), and O₃. In this study, we investigate the relative importance of other reactants to OH for the fate of reactant species in OFR under a wide range of conditions via box modeling. The relative importance of non-OH species is less sensitive to UV light intensity than to water vapor mixing ratio (H₂O) and external OH reactivity (OHR_ext), as both non-OH reactants and OH scale roughly proportionally to UV intensity. We show that for field studies in forested regions and also the urban area of Los Angeles, reactants of atmospheric interest are predominantly consumed by OH. We find that O(¹D), O(³P), and O₃ have relative contributions to volatile organic compound (VOC) consumption that are similar or lower than in the troposphere. The impact of O atoms can be neglected under most conditions in both OFR and troposphere. We define “riskier OFR conditions” as those with either low H₂O (< 0.1 %) or high OHR_ext ( ≥  100 s⁻¹ in OFR185 and > 200 s⁻¹ in OFR254). We strongly suggest avoiding such conditions as the importance of non-OH reactants can be substantial for the most sensitive species, although OH may still dominate under some riskier conditions, depending on the species present. Photolysis at non-tropospheric wavelengths (185 and 254 nm) may play a significant (> 20 %) role in the degradation of some aromatics, as well as some oxidation intermediates, under riskier reactor conditions, if the quantum yields are high. Under riskier conditions, some biogenics can have substantial destructions by O₃, similarly to the troposphere. Working under low O₂ (volume mixing ratio of 0.002) with the OFR185 mode allows OH to completely dominate over O₃ reactions even for the biogenic species most reactive with O₃. Non-tropospheric VOC photolysis may have been a problem in some laboratory and source studies, but can be avoided or lessened in future studies by diluting source emissions and working at lower precursor concentrations in laboratory studies and by humidification. Photolysis of secondary organic aerosol (SOA) samples is estimated to be significant (> 20 %) under the upper limit assumption of unity quantum yield at medium (1 × 10¹³ and 1.5 × 10¹⁵ photons cm⁻² s⁻¹ at 185 and 254 nm, respectively) or higher UV flux settings. The need for quantum yield measurements of both VOC and SOA photolysis is highlighted in this study. The results of this study allow improved OFR operation and experimental design and also inform the design of future reactors.

Studien undersöker hur könsroller gestaltas ur ett genusperspektiv i bilderboken Se upp för krokodilen! (Moroni &amp; Eriksson, 2013). Syftet är att få djupare kunskaper om hur dessa skildringar speglar målen i läroplanen för förskolan om att motverka traditionella könsnormer och främja jämställdhet och likabehandling mellan könen. Forskare menar att bilderboken är ett användbart och didaktiskt verktyg för att fånga barns intressen och påverka deras tankegångar. Tidigare forskning (Kåreland, 2005) visar att könsstereotypa föreställningar lever kvar i en stor del av utbudet av barnböcker. I studien analyseras bilderboken Se upp för krokodilen! (Moroni &amp; Eriksson, 2013) både utifrån bilder och text. Analysen fokuserar på karaktärernas yttre- och inre personskildringar, det vill säga, karaktärernas utseende, ansiktsuttryck, kroppsspråk respektive karaktärernas egenskaper och personligheter. Studiens resultat visar att karaktärerna i boken, till viss del avviker från de stereotypa föreställningar om vad som anses som maskulint och feminint, dock visar karaktärerna att de båda har egenskaper som kan representera båda könen. / The study examines how gender roles are portrayed from a gender perspective in the picture book Watch out for the crocodile! (Moroni &amp; Eriksson, 2013). The aim is to get deeper knowledge about how these depictions reflect the goals of the Swedish syllabus for preschool that counteracts traditional gender norms and promote equality and equal treatment between the genders. Researchers consider that the picture book is a useful and didactic implement to capture childrens’ interests and influence their thoughts. Previous research (Kåreland, 2005) shows that gender-stereotyped conceptions persist in a large part of the range of children’s books. The study analyzes the picture book Watch out for the crocodile! (Moroni &amp; Eriksson, 2013) both from photographs and text. The analysis focuses on the characters external and internal personal depictions, that is, the characters appearance, facial expressions, body language and the characters properties and personalities. The results of the study show that the characters in the book, partially differ from the stereotypical conceptions of what is considered as masculine and feminine. However, the characters show that they both have properties that can represent both sexes.

No description available.

Les métamatériaux électromagnétiques sont des composites artificiels, constitués de résonateurs etayant des propriétés optiques n’existant pas à l’état naturel. Cette thèse est consacrée à lafabrication et caractérisation de tels matériaux. Pour cela des particules métalliques coeur-écorce(d’or ou d’argent enrobées de silice) sont assemblées par la technique de Langmuir-Blodgett afin deformer des réseaux denses en monocouche et en multicouches. Ces nanoparticules jouent le rôle derésonateurs grâce à la présence de la résonance plasmon et l’écorce de silice permet de contrôler ladistance entre particules. Nous avons ainsi réalisé des matériaux dont la distance entre lesrésonateurs et la fraction métallique varient. Les analyses spectro-photométriques des films obtenus,notamment en réflexion normale, nous ont permis d’extraire les propriétés optiques de nosmatériaux. Pour cela nous avons proposé un modèle phénoménologique dans lequel nousdéfinissons la permittivité de la couche effective comme étant celle de la matrice à laquelle s’ajouteun oscillateur de Lorentz décrivant la présence d’une résonance plasmon. Nous avons pu ainsimontrer expérimentalement qu’il était possible d’obtenir des métamatériaux d’indice de réfractioninférieur à 1 quand la fraction de métal dans le matériau est suffisamment importante. / Electromagnetic metamaterials are artificial composites, containing resonators and exhiniting opticalproperties which do not exist in a natural state. This thesis is dedicated to the manufacturing and thecharacterization of such materials. Metallic core-shell particles (gold or silver core coated with a silicashell) are assembled by the Langmuir-Blodgett technique to form dense monolayer and multilayernetworks. These nanoparticles play the role of resonators thanks to the presence of the plasmonresonance of the core whereas the silica shell allows a fine control of the distance between themetallic particles. We realized materials whose distance between resonators and metallic fractionvary. The spectrophotometric analyses, in particular reflection at normal incidence, allowed us toextract the optical properties of the materials. We proposed a phenomenological model in which wedefine the permittivity of the effective layer as the permittivity of a homogenous matrix to which aLorentz oscillator is added to describe the presence of the plasmon resonance. We were able toshow experimentally metamaterials with refractive index lower than 1 can be obtained when thefraction of metal in the material is important enough.

En utilisant la combinaison spectrale de faisceaux, des faisceaux provenant de plusieurs lasers opérant à des longueurs d'onde différentes sont combinés en un seul faisceau avec une divergence proche de la limite de diffraction. Cette thèse présente des résultats expérimentaux de combinaison spectrale de faisceaux avec une grande densité spectrale dans deux régions spectrales d'intérêt (1064 et 1550 nm). Un système laser avec une puissance de sortie de l'ordre du kW et une divergence du faisceau combiné proche de la limite de diffraction est démontré. Le système combine cinq fibres lasers dopées Ytterbium polarisées de façon aléatoire avec une séparation spectrale de 0.5 nm en utilisant des réseaux de Bragg volumiques réfléchissants présentant une largeur spectrale étroite et une efficacité de combinaison absolue supérieure à 90%. La projection d'un tel système pour des puissances de sortie de l'ordre de 100 kW est discutée. / Using spectral beam combining (SBC), beams from an array of lasers with each element operated at a different wavelength are combined into a single near-diffraction-limited beam with the same aperture using dispersive optical elements. In this thesis, experimental results of SBC with high spectral density of combined channels in two spectral regions of interest (1064 and 1550 nm) are reported. A laser system with kW-level output power and near-diffraction-limited divergence of spectrally-combined output beam is demonstrated. The system combines five randomly-polarized Yb-doped fiber lasers with 0.5 nm spectral separation in central wavelengths with absolute efficiency of combining > 90% using narrow-band reflecting volume Bragg gratings recorded in photo-thermo-refractive glass. Scaling of such systems to 100 kW power level is discussed.

Ce travail de thèse a pour objectif la création d’indice optique local et contrôlé dans une matrice vitreuse à travers la mise au point et le développement de procédés de synthèse de nanoparticules (NPs) de sulfure de zinc (ZnS) dans un verre d’oxydes. Nous avons commencé par l’élaboration par voie de fusion d’un verre d’oxydes de composition initiale très simple. Nous avons ensuite examiné la problématique de la synthèse et du contrôle de croissance des NPs de ZnS dans nos échantillons dans trois matrices différentes et par trois traitements : recuit thermique, insolation UV ou par un traitement simultané (recuit thermique + insolation UV). Les propriétés optiques des verres dopés NPs ZnS fabriqués ont été caractérisées par diverses techniques (absorption UV visible, photoluminescence, FTIR, Raman, XPS, mesure d’indice). Il ressort de ces caractérisations que nous arrivons à fabriquer des NPs dans les trois matrices dont la taille peut aller de 1.8 à 7 nm. La dispersion sur les distributions de taille dépend de la matrice, du traitement post-fusion et de sa durée ainsi que de la concentration initiale en dopant. Nous avons également été amené à synthétiser et à étudier des nanopoudres de ZnS. Le procédé de sélection de taille révèle qu’il est possible d’obtenir au moins trois distributions étroites de tailles bien distinctes. Des filtres optiques UV à bande étroite peuvent ainsi être réalisés pour une longueur choisie en contrôlant la taille des NPs ZnS. Des applications prospectives des NPs ZnS pour le nano marquage et la photo dégradation de polluants modèles présents dans l’eau ont été illustrées / Our efforts have been devoted to the development of simple approach to synthesize ZnS nanoparticules (NPs) by melting process in a glassy matrix with the aim to create a controlled optical index variation. In this thesis, we present the formation of ZnS NPs in the glassy matrix and study of their optical properties. The nanocomposite incorporating ZnS in the host medium was prepared using the melting process from a mixture of the raw materials. We have prepared various glass samples with ZnS NPs size ranging from 1.8 à 7 nm. These samples were treated (heat treatment ± UV insulation with 244 nm laser) and characterized by UV-Vis absorption, FTIR, photoluminescence spectroscopy, Raman measurements and XPS. The refractive index measurements of these nanostructured composite glasses have been carried out and show an important increase with ZnS concentrations and treatments. We also present the elaboration of small and monodisperse ZnS nanopowder with size ranging from 3 to 100 nm by a simple, low-cost and mass production chemical method. The NPs were characterised by X-ray powder diffraction (XRD), UV-vis absorption and photoluminescence spectroscopy. The photocatalytic activity of ZnS nanopowders was investigated by using different colorant water dispersed. ZnS NPs appear to be a good candidate for potential environmental applications such as water purification. We also present application of fluorescent ZnS nanoparticles as cellular biomarkers. Fluorescent microscopy images of osteoblastic MC3T3-E1 cells revealed that the ZnS nanoparticles were biocompatible and were penetrated cells and nucleus regardless of their size. Hence, the ZnS NPs can be good candidates for drug delivery and bio-imaging applications