La chambre réverbérante à brassage de modes (CRBM) est une cavité métallique fermée surdimensionnée, équipée d’un brasseur de modes. Le brassage de modes rend le champ électromagnétique homogène et isotrope à l’intérieur de la CRBM (dans son volume utile). Cette thèse illustre tout d’abord une nouvelle méthode pour évaluer les performances d’un brasseur de modes (via le spectre Doppler). Ensuite, elle présente une nouvelle méthode permettant de mesurer la surface équivalente radar (SER) d’un objet canonique en utilisant la technique de fenêtrage temporel ou time-gating. Enfin, elle présente une nouvelle méthode permettant de mesurer le diagramme de rayonnement d’une antenne dans une cavité surdimensionnée via la technique de time-gating. / The reverberation chamber (RC) is an oversized closed metal cavity, equipped with a mode-stirrer. The mode stirring makes the electromagnetic field homogeneous and isotropic inside the RC (in its useful volume). This thesis illustrates firstly a new method for evaluating the performance of a mode-stirrer (via the Doppler spectrum). Then, it presents a new method for measuring the radar cross section (RCS) of a canonical object using the time-gating technique. Finally, it presents a new method for measuring the antenna radiation pattern in an oversized cavity via the time-gating technique.

Que ce soit dans le domaine médical ou en contrôle non destructif, les systèmes d’imagerie ultrasonore sont devenus de plus en plus utilisés de nos jours. Leurs applications ne cessent de s’élargir et des performances toujours plus accrues sont vivement recherchées, afin d’améliorer la qualité des diagnostics réalisés. Nous sommes donc passés de l’utilisation de systèmes à base de transducteurs ultrasonores mono-élément à des systèmes utilisant des réseaux de transducteurs à une dimension (1D) et à deux dimensions (2D) composés d’éléments de plus en plus nombreux et petits. Néanmoins, un phénomène indésirable est fortement présent dans ces réseaux de transducteurs ultrasonores : il s’agit du couplage inter-éléments tendant à limiter leurs performances acoustiques et à modifier leur diagramme de rayonnement. Tout au long de ce travail de recherche, nous avons donc cherché à comprendre ce phénomène parasite et à apporter des solutions pour le réduire voire le supprimer. En se basant sur des modélisations éléments finis 2D et 3D et grâce à la fabrication de prototypes, nous avons d’une part, mis en évidence les différents types de couplages présents dans un réseau de transducteurs (acoustique, mécanique) et d’autre part, deux méthodes de correction basées l’une comme l’autre sur l’application de tensions convenables aux différents éléments du réseau ont été testées. La première méthode utilise les déplacements normaux moyens à la surface de chaque élément du réseau pour évaluer ces tensions, tandis que la deuxième fait appel aux courants motionnels parcourant chaque élément pour les déterminer. Les résultats numériques et expérimentaux concernant les déplacements et les diagrammes de rayonnement sont en bon accord. En outre, les deux méthodes s’avèrent particulièrement efficaces pour réduire le couplage inter-éléments. / Whether in medicine or in non-destructive testing, ultrasonic imaging systems have become increasingly used nowadays. Their applications continue to expand and good performances are needed to improve the quality of the diagnosis. Moreover, significant progress has been made since these systems were originally based on single element ultrasonic transducers and are now made of mono-dimensional (1D) and bi-dimensional (2D) elements arrays ever more numerous and smaller. However, an undesirable phenomenon is strongly present in the ultrasonic transducer arrays: it is the cross-talk, which limits their acoustic performances and modifies their radiation pattern. Throughout this research, we have attempted on one hand to understand this parasitic phenomenon and on the other hand to provide solutions in order to reduce it or even remove it. To highlight the cross-talk types (acoustic and mechanical) and to test the proposed correction methods, we developed two-dimensional (2D) and three-dimensional (3D) finite element modeling and fabricated some prototypes. Both correction methods rely on the application of suitable voltages to the array elements. The first method uses the average of the normal displacements at the surface of each element to evaluate the voltages, while the second one utilizes the motional currents through each element to determine them. The numerical and experimental results concerning the displacements and the radiation patterns are in good agreement. In addition to this, both methods have been efficiently performed to reduce the cross-talk.

The aim of this thesis is to improve the operational performance of the communication antennas mounted on complex platforms such as aircrafts and warships by arranging placements of these antennas. Towards this aim, primarily, in order to gain insight on the influence of geometrically simple structures composing the platform on antenna performance, a quarter wavelength monopole antenna placed at the center of a finite square ground plane is studied by using uniform Geometrical Theory of Diffraction (GTD). Besides, the change of far field radiation pattern and complex diffraction functions due to the variation of the width of a square ground plane is examined. Secondly, electromagnetic analysis of two Ultra High Frequency (UHF) antennas mounted on geometrically simple structures composing simplified F-4 aircraft is carried out by using transient solver of Computer Simulation Technology (CST) Microwave Studio&reg / (MWS), in order to conceive the influence of each structure on antenna performance. Then, electromagnetic analysis of these antennas mounted on simplified and original F-4 aircrafts is performed, in order to determine the optimal location of the lower UHF antenna (newly installed antenna) for the operational performance of this antenna to be optimum in terms of electromagnetic coupling and far field radiation pattern. Finally, electromagnetic analysis of the communication antennas mounted on a warship is performed by using transient solver of CST MWS&reg / , in order to determine the optimal locations of these antennas for the operational performance of these antennas to be optimum in terms of electromagnetic coupling and far field radiation pattern.

Sewer and oil pipeline spillage issues have become major causes of pollution in urban and rural areas usually caused by blockages in the water storage and drainage system, and oil spillage of underground oil pipelines. An effective way of avoiding this problem will be by deploying some mechanism to monitor these installations at each point in time and reporting unusual liquid activity to the relevant authorities for prompt action to avoid a flooding or spillage occurrence. This research work presents a low cost energy efficient liquid level monitoring technique using Radio Frequency Identification Technology. Passive UHF RFID tags have been designed, modelled and optimized. A simple rectangular tag, the P-shaped tag and S-shaped tag with UHF band frequency of operation (850-950 MHz) has been designed and modelled. Detailed parametric analysis of the rectangular tag is made and the optimised design results analysed and presented in HFSS and Matlab. The optimised rectangular tag designs are then deployed as level sensors in a gully pot. Identical tags were deployed to detect 4 distinct levels in alternate positions and a few inches in seperation distance within the gully pot height (Low, Mid, High and Ultra high). The radiation characteristic of tag sensors in deployment as modelled on HFSS is observed to show consistent performance with application requirements. An in-manhole chamber antenna for an underground communication system is analysed, designed, deployed and measured. The antenna covers dual-band impedance bandwidths (i.e. 824 to 960 MHz, and 1710 to 2170 MHz). The results show that the antenna prototype exhibits sufficient impedance bandwidth, suitable radiation characteristics, and adequate gains for the required underground wireless sensor applications. Finally, a Linearly Shifted Quadrifilar Helical Antenna (LSQHA) designed using Genetic Algorithm optimisation technique for adoption as an RFID reader antenna is proposed and investigated. The new antenna confirms coverage of the RFID bandwidth 860-960 MHz with acceptable power gain of 13.1 dBi.

Lors de cette thèse, on a développé un banc automatisé de relevé du diagramme de rayonnement particulièrement pour des antennes millimétriques avec faible directivité. On propose trois méthodes d’alimentation. La première méthode développée a été de concevoir une nouvelle sonde ayant un accès micro-coaxial de plus de 5cm afin de réduire la zone de masquage au minimum. Associée à une configuration de type flip-chip inversée, cette méthode a permis d’avoir une réduction de la zone de masquage de 80° à 20°. La deuxième méthode a été de concevoir une liaison souple par film souple de Kapton. Cette méthode présente l’avantage de placer une plus grande partie des connexions métalliques sous un plan de masse, mais nécessite une connexion optimale à la puce. Les résultats obtenus présentent une zone de masquage pratiquement inexistante, et sont conformes à l’état de l’art. La troisième méthode SER est basée sur la mesure de l’antenne sans placer de sondes ou de connecteurs spéciaux, mais en utilisant un système à charges connues. La simulation nous montre qu'il nous manque une dynamique par ces trois charges. / In this thesis, we designed and built a new 3D test bench, particularly for low-directivity integrated antennas at millimeter-wave frequencies. We proposed three feeding techniques for the antenna under test (AUT): a probe-fed technique, a flexible-transmission-line-fed technique and a radar-cross-section (RCS) method. The probe-fed method was developed with a customized probe, which involves an elongated (50 mm) coaxial line between the probe tip and the probe body, wherein the probe body is reversed (relative to the conventional measurement configuration) so it lies below the plane of the AUT. This method reduces the range of angles that are masked from 80° (for a conventional probe setup) to 20°. The second method was developed using a flexible transmission line with a modified flip-chip connection to the AUT. This method completely eliminates the masked zone. The third method characterizes the radiation pattern using a radar cross-section (RCS) method. This method requires neither a probe system nor connectors. However the simulation results demonstrate that there is insufficient variation in the ratio of received power to incident power as the load on the AUT is varied in order to make precise measurement with conventional measurement equipment.

The thesis is focused on the design of a planar resonant-type antenna, which exploits a proper combination of left- and right-handed properties of transmission lines. This transmission line is called CRLH TL and is based on Sievenpiper mushroom structure. Advantages of the proposed antenna concept are demonstrated by a detailed comparison of its basic properties with the properties of a conventional patch antenna.

This work deals with the study of Yagi-Uda antennas, followed by analysis and design of planar antenna with wired reflector. The first part focused on the analysis of the antenna and parameters. Another part of the continuing investigation of the optimum parameters for a given antenna followed by a design in Wi-Fi 5 GHz band. The antenna is simulated in CST Microwave Studio. The final part devoted the results achieved

The purpose of this study is to investigate if individual differences exists between microwave sensors from the same manufacturer and to find which variables of the microwave sensors that can be the reason for those individual differences. To investigate this, an experiment environment was made to gather data from microwave sensors in a repetitive way. This experiment environment was used in three different experiments where individual differences, radiation pattern and noise were measured. As a base for the experiments a literature review was made to find variables that could affect the individual differences. The study shows that individual differences on signal strength can be found on microwave sensors of the type MDU2000 from Microwave solutions. Also, the radiation pattern at higher angles can differentiate. The frequency from the microwave sensors at lower speeds shows no significant difference individually. This study contributes to increased knowledge about individual differences on microwave sensors of the type MDU2000. Results from this study can be used as a recommendation to suitable applications. As both resources and time have been limited during this thesis, the study was limited to only perform tests on microwave sensors of the type doppler radar. Another limit to the study is to only do tests at lower speeds i.e. a maximum speed of 5km/h. / Syftet med denna studie är utreda om individuella skillnader finns mellan mikrovågssensorer från samma tillverkare samt att ta reda på vilka variabler hos mikrovågssensorerna som kan bidra till dessa individuella skillnader. För att ta reda på detta konstruerades en experimentmiljö för att samla in data från mikrovågssensorer på ett repetitivt sätt. Denna experimentmiljö användes i tre olika experiment där individuell skillnad, strålningsmönstret samt brus uppmättes. Som grund till experimenten utfördes en litteraturundersökning för att hitta variabler som kan påverka den individuella skillnaden. Studien visar att individuella skillnader på signalstyrka finns bland mikrovågssensorer av typen MDU2000 från Microwave solutions. Även antennens strålningsmönster vid större vinklar kan skilja. Frekvensen från mikrovågssensorn vid lägre hastigheter visar ingen signifikant skillnad individuellt. Denna studie bidrar till ökad kunskap kring individuella skillnader på mikrovågssensorer av typen MDU2000. Resultat från studien kan användas som rekommendation till lämpliga användningsområden. Då både resurser och tid har varit begränsade under examensarbetet sattes en begränsning till att endast utföra tester på mikrovågssensorer av typen dopplerradar. En till begränsning är att endast göra tester på låga hastigheter d.v.s. maximalt 5km/h.

There is currently a demand of mm‑wave on‑chip antennas to enable all kinds of new applications in several different areas. But the development requires, among other things, special equipment used during the measurement phase due to the small dimensions and the high frequencies. In this project a robotic measurement system, SAX (Single Arm eXtra), was designed and constructed at Micro and Nanosystems (MST) department at KTH Royal Institute of Technology (Sweden). The purpose of the SAX is to enable radiation pattern measurements of on‑chip antennas ( 140 GHz to 325 GHz ), whether the boresight is vertical or horizontal along with other requirements, by moving a converter with the measurement antenna around the antenna in question. Several alternative designs for the basic construction, both from other works and invented by the author, were analyzed based on the requirements for this project and other limitations. The chosen unique design, the SAX, is very compact and uses only one stepper motor. Several parts have been developed in this project to ensure the proper functionality of the SAX. That includes a main operator program, a motor input signal generating program, a motor input signal executing system, a security system, and a system for controlled rotation of the SAX. For the input signal to the motor two different algorithms to generate the time delays were developed and tested. They were adapted to make the motor manage the sweeps of an ever‑changing load with high inertia during acceleration and deceleration. One of them was developed to make the time delay array generation much more efficient albeit with larger approximation error. The SAX worked well and should be rather easy‑to‑use regarding the operation of the system, from the physical maneuvering to utilizing the sub‑systems to the running of the main operator program. It fulfilled the specific requirements by enable a cross pattern measurement from  -60° to +60°  both from above and from the side, adjustment of the radius between 15cm to 45cm , adjustment 10cm in height, to be rotated along the floor in steps of 1°, measurement steps of 1° with an accuracy of less than 0,5° (the largest error was measured to be ≤ 0,461°). However, some calibration work needs to be done before the optimal performance of the system is reached. As a verification of the operation of the system data from measurements of open‑ended waveguides was presented. / Det finns en efterfrågan på chipantenner för millimetervågor eftersom de kan möjliggöra allehanda produkter inom flera olika områden. Forskningen på dessa ställer dock bl.a. speciella krav på utrustning som används under testmätningsfasen p.g.a. de små dimensionerna och den höga frekvensen. I detta projekt har ett robotsystem, SAX (Single Arm eXtra), utformats och konstruerats på avdelningen för Mikro- och nanosystem på KTH. Syftet med SAX är att mäta högfrekventa chipantenner ( 140 GHz till 325 GHz ) genom att förflytta en frekvensomvandlare med tillhörande mätantenn i en cirkulär bana runt antennen ifråga, oavsett om den är riktad vertikalt eller horisontellt och givet andra kravspecifikationer. Flera designalternativ för den grundläggande konstruktionen, både från andras arbeten och framtagna av författaren själv, har analyserats utifrån kravspecifikation för detta projekt och andra begränsningar. Den valda unika designen, SAX, är väldigt kompakt och använder sig bara av en stegmotor. För att möjliggöra funktionen i den slutgiltiga produkten har flera delar tagits fram vilka inkluderar ett operatörsprogram, ett program för genererandet av motorstyrsignaler, ett program för motorstyrning, ett säkerhetssystem och ett rotationssystem för kontrollerad rotation av SAX. För genererandet av motorstyrsignaler i form av tidsfördröjda pulser framtogs två olika algoritmer. De ger anpassade accelerations- och retardationssignaler för att motorn ska klara av att förflytta en föränderlig last med stor tröghet. En av dessa framtogs med syfte att mycket effektivt generera pulstiderna om än med större approximationsfel. SAX fungerade tillfredsställande och torde vara ganska lättanvänd med tanke på vad systemet kräver av operatören, från att fysiskt manövrera systemet till att använda delsystemen till att använda operatörsprogrammet. Systemet uppfyllde de givna specifika kraven genom att möjliggöra mätningar i form av ett kryssmönster från -60° till +60°  både ovanifrån och från sidan, radiejustering från 15cm till 45cm , höjdjustering över 10cm , rotation över golvet i steg om 1° , mätningar i steg om 1° med en noggrannhet på 0,5° (den största avvikelsen uppmättes till ≤ 0,461°). Vidare kalibrering behöver dock utföras för att utnyttja den fulla potentialen hos konstruktionen. För att verifiera funktionsdugligheten för systemet presenterades data från mätningar gjorda på öppna vågledare.

The aim of this study is to analysis, investigate and find out the solutions for the problems associated with the implementations of antennas RFID Reader and Tag for various applications. In particular, the efficiency of the RFID reader antenna and the detection range of the RFID tag antenna, subject to a small and compact antenna¿s design configuration have been studied. The present work has been addressed directly to reduce the cost, size and increase the detection range and communication reliability of the RFID framework antennas. Furthermore, the modelling concept of RFID passive tags mounted on various materials including the novel design of RFID reader antenna using Genetic Algorithm (GA) are considered and discussed to maintain reliable and efficient antenna radiation performances. The main benefit of applying GA is to provide fast, accurate and reliable solutions of antenna¿s structure. Therefore, the GA has been successfully employed to design examples: meander-line, two linear cross elements and compact Helical- Spiral antennas. In addition, a hybrid method to model the human body interaction with RFID tag antenna operating at 900MHz has been studied. The near field distribution and the radiation pattern together with the statistical distribution of the radiation efficiency and the absorbed power in terms of cumulative distribution functions for different orientation and location of RFID¿s tag antenna on the human body have been demonstrated. Several tag antennas wi th symmetrical and unsymmetrical structure configurations operating in the European UHF band 850-950 MHz have been fabricated and tested. . The measured and simulated results have been found to be in a good agreement with reasonable impedance matching to the typical input impedance of an RFID integrated circuit chip and nominal power gain and radiation patterns.