Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Neste trabalho, descreve-se a síntese, caracterização e propriedades dos complexos derivados da tetra(3,4-piridil)porfirazina com os grupos [Ru(bipy)2Cl]1+. A conjugação eletrônica entre o resíduo piridínico e o anel da porfirazina promovem uma eficiente comunicação entre os grupos periféricos e o central, que é refletido no espectro de emissão e seu correspondente perfil de excitação. Esse tipo de comportamento revela um efeito antena no sistema H2TPyPzTRu, contrastante com as propriedades fotofisicas das porfirinas análogas TPyPRu, onde os grupos piridínicos exibem baixa interação eletrônica ao anel porfirínico. Apesar do forte acoplamento eletrônico entre os grupos perféricos e o central, as propriedades eletrônicas dos complexos de rutênio foram preservadas, exibindo potenciais redox muito próximos dos complexos livres e comportamento espectroeletroquímico típicos de complexos metálicos N-heterocíclicos. Esses aspectos levam a novas perspectivas relacionadas à estrutura dos compostos, pois são potencialmente interessantes para o estudo referente à formação de oxigênio singlete e para PDT. Outro direcionamento desta tese, foi o de explorar a geração de novas interfaces baseadas na formação de pares iônicos constituídos pelas espécies H2TPyPzTRu/CuTSPc em comparação com o filme da espécie catiônica H2TPyPzTRu. Através de medidas de espectroscopia de impedância eletroquímica, foram constatados mecanismos distintos de condução nos filmes formados, que pode ser ou um mecanismo misto envolvendo os complexos periféricos e o anel central da porfirazina, ou um mecanismo de condução eletrônica envolvendo somente o sistema de empilhamento π do anel central da porfirazina. / In this work, we describe the synthesis, characterization and properties of derived tetra(3,4-pyridil)porphyrazine complex containing four [Ru(bipy)2Cl]1+ groups. The electronic conjugation between the pyridinium moiety and the porphyrazine ring promote an efficient communication between the peripherical groups and central ring, which is reflected in the emission spectrum and related excitation profile. The observed behavior reveals an efficient antenna effect in the H2TPyPzTRu system. ln spite of the strong electronic coupling between the central and peripherical groups, the electronic properties of ruthenium complex were preserved, exhibiting redox potencials very close to those of free complexes. These aspects provided new perspectives of exploiting the compound strutures, particularly the oxygen singlet formation and PDT application. Another aspect focused in this investigation was the generation of new interfaces based on ion-pair formation of H2TPyPzTRu/CuTSPc, in comparison with its cationic species H2TPyPzTRu alone. By means of electrochemical impedance spectrocopy, it was shown that the conduction mecanisms in these films involve either the peripherical complex and the central porphyrazine ring.

Neste trabalho, descreve-se a síntese, caracterização e propriedades dos complexos derivados da tetra(3,4-piridil)porfirazina com os grupos [Ru(bipy)2Cl]1+. A conjugação eletrônica entre o resíduo piridínico e o anel da porfirazina promovem uma eficiente comunicação entre os grupos periféricos e o central, que é refletido no espectro de emissão e seu correspondente perfil de excitação. Esse tipo de comportamento revela um efeito antena no sistema H2TPyPzTRu, contrastante com as propriedades fotofisicas das porfirinas análogas TPyPRu, onde os grupos piridínicos exibem baixa interação eletrônica ao anel porfirínico. Apesar do forte acoplamento eletrônico entre os grupos perféricos e o central, as propriedades eletrônicas dos complexos de rutênio foram preservadas, exibindo potenciais redox muito próximos dos complexos livres e comportamento espectroeletroquímico típicos de complexos metálicos N-heterocíclicos. Esses aspectos levam a novas perspectivas relacionadas à estrutura dos compostos, pois são potencialmente interessantes para o estudo referente à formação de oxigênio singlete e para PDT. Outro direcionamento desta tese, foi o de explorar a geração de novas interfaces baseadas na formação de pares iônicos constituídos pelas espécies H2TPyPzTRu/CuTSPc em comparação com o filme da espécie catiônica H2TPyPzTRu. Através de medidas de espectroscopia de impedância eletroquímica, foram constatados mecanismos distintos de condução nos filmes formados, que pode ser ou um mecanismo misto envolvendo os complexos periféricos e o anel central da porfirazina, ou um mecanismo de condução eletrônica envolvendo somente o sistema de empilhamento π do anel central da porfirazina. / In this work, we describe the synthesis, characterization and properties of derived tetra(3,4-pyridil)porphyrazine complex containing four [Ru(bipy)2Cl]1+ groups. The electronic conjugation between the pyridinium moiety and the porphyrazine ring promote an efficient communication between the peripherical groups and central ring, which is reflected in the emission spectrum and related excitation profile. The observed behavior reveals an efficient antenna effect in the H2TPyPzTRu system. ln spite of the strong electronic coupling between the central and peripherical groups, the electronic properties of ruthenium complex were preserved, exhibiting redox potencials very close to those of free complexes. These aspects provided new perspectives of exploiting the compound strutures, particularly the oxygen singlet formation and PDT application. Another aspect focused in this investigation was the generation of new interfaces based on ion-pair formation of H2TPyPzTRu/CuTSPc, in comparison with its cationic species H2TPyPzTRu alone. By means of electrochemical impedance spectrocopy, it was shown that the conduction mecanisms in these films involve either the peripherical complex and the central porphyrazine ring.

In recent years there is an increasing awareness of the importance of chiral phosphorus ligands in transition metal organometallic chemistry because of the utility of such complexes in homogeneous catalytic reactions. This thesis deals with synthetic, spectroscopic and X-ray crystallographic studies on ruthenium complexes of chiral and achiral P-N-P type ligands, known as "diphosphazanes", with emphasis on ruthenium carbonyl clusters. Several ruthenium carbonyl clusters have been synthesized and characterized by elemental analyses, ER and NMR (lH, nC and 3lP) spectroscopic data. In several instances, the molecular structures of the clusters have been confirmed by single crystal X-ray diffraction studies. Chapter 1 provides a brief overview of various types of chiral phosphorus ligands and general synthetic routes to diphosphazanes. A brief review of the transition metal chemistry of diphosphazanes and diphosphazane chalcogenides (published since 1994) is presented A review of the literature on the carbonyl clusters of the group-8 transition metals (Fe, Ru, Os) bearing mono- and diphosphines is also included in this chapter The scope and aim of the present investigation is outlined at the end of this chapter. Chapter 2 provides the results obtained in the present investigation and a detailed discussion of the spectroscopic and crystallographic data. The essential feature of the work is summarized at the end of the chapter. Chapter 3 gives a detailed account of the experimental procedure for the synthesis of the compounds and spectroscopic and analytical measurements. The experimental details of X-ray structure determination are also given in this chapter. To save space, the coordinates of the H-atoms and the calculated and observed structure factor tables are not included. In some cases, reference to CCDC deposition number is included. The references of the literature are compiled at the end of the thesis and are indicated in the text by appropriate numbers appearing as superscripts. The compounds synthesized in the present study are represented by bold Arabic numerals and are listed in Appendix I. The abbreviations employed in the thesis conform to those generally used in Chemical Abstracts.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Cette thèse fait partie d’un projet franco-keyan dénommé ELEPHOX (ELEctrochemical and PHOto Properties of Some Remarkable Ruthenium and Iron CompleXes). En particulier, notre focus est la continuation du travail de C. Muhavini Wawire, Damien Jouvenot, Fréd erique Loiseau, Pablo Baudin, Sébastien Liatard, Lydia Njenga, Geoffrey Kamau, et Mark E. Casida, “Density-Functional Study of Lumininescence in Polypyridine Ruthenium Complexes,” J. Photochem. and Photobiol. A 276, 8 (2014). Cet article a proposé une indice orbitalaire de temps de luminescence pour les complexesde ruthénium. Cependant cet article n’était limité qu’à quelques mnolecules. Afin d’avoir une théorie plus fiable et donc potentiellement plus utile, il faudra tester l’indice de luminescence sur beaucoup plus de molécules. Ayant établi le protocol, il était “évident” mais toujours un défi de le tester sur encore une centaine de molécules pour démonter ou infirmer l’indice proposée. Pour ce faire, j’ai examainé les 98 pages de la Table I de A. Juris, V. Balzani, F. Bargelleti, S. Campagna, P. Belser, et A.V. Zelewsky, “Ru(II) polypyridine complexes: Photophysics, photochemistry, electrochemistry, and chemiluminescence,” Chem. Rev. 84, 85 (1988) et j’ai extrait un nombre important de données susceptibles à comparaison avec les résultats des calculs de la théorie de la fonctionelle de la densité (DFT) et la DFT dépendante du temps (TD-DFT). Comme les résultats étaient suffisament encourageant, le modèle DFT était examiné de plus près avec la méthode d’une théorie de champs de ligands (LFT) à la base de la densité des états partielle (PDOS). Ainsi j’ai pu tester l’indice de luminescence proposée précédement par laméthode PDOS-LFT et j’ai trouvé des difficultés avec l’indice initialement proposée. Par contre, nous avons pu proposer une nouvelle indice de luminescence qui, à quelques exceptions près, a une corrélation linéaire avec une barrière énergétique moyenne pour l’état triplet excité dérivée à partir des données experimentales. À l’avenir nous pouvons proposer une investigation plus directe de la barrière sur la surface triplet excité pour remplacer la valeur approximative déduite de l’expérience. Puis nous voulons voir sinotre indice de luminescence s’appliquent aux cas des complexes d’iridium. / This thesis is part of the Franco-Kenyan project ELEPHOX (ELEctrochemicaland PHOto Properties of Some Remarkable Ruthenium and Iron CompleXes)project. In particular, it focused on the continuation of the work ofC. Muhavini Wawire, Damien Jouvenot, Fréd erique Loiseau, Pablo Baudin,Sébastien Liatard, Lydia Njenga, Geoffrey Kamau, and Mark E. Casida,“Density-Functional Study of Lumininescence in Polypyridine RutheniumComplexes,” J. Photochem. and Photobiol. A 276, 8 (2014). That paperproposed a luminescence index for estimating whether a ruthenium complexwill luminesce or not. However that paper only tested the theory ona few molecules. In order for the theory to have a significant impact, itmust be tested on many more molecules. Now that the protocol has beenworked out, it was a straightforward but still quite challenging matter todo another 100 or so molecules to prove or disprove the theory. In order todo so, I went through the 98 pages of Table I of A. Juris, V. Balzani, F.Bargelleti, S. Campagna, P. Belser, and A.V. Zelewsky, “Ru(II) polypyridinecomplexes: Photophysics, photochemistry, electrochemistry, and chemiluminescence,”Chem. Rev. 84, 85 (1988) and extracted data suitable for comparingagainst density-functional theory (DFT) and time-dependent (TD-)DFT.Since the results were sufficiently encouraging, the DFT model was examinedin the light of partial density of states ligand field theory (PDOS-LFT) andthe previously proposed luminescence indices were tested. In fact, the originallyproposed indices were not found to be very reliable but we were able topropose a new luminescence index based upon much more data and in analogywith frontier-molecular orbital ideas. Except for a few compounds, this index provides a luminescence index with a good linear correlation with anexperimentally-derived average excited-state activation energy barrier. Futurework should be aimed at both explicit theoretical calculations of thisbarrier for ruthenium complexes and extension of the luminescence indexidea to iridium complexes.

Introduction The chemistry of transitional metal complexes bearing σ-bonded H−X (X = H, Si, C) species/fragments, the so called σ-complexes, are key intermediates in catalytic processes such as hydrogenation, hydrosilylation, alkane functionalization etc. Particularly, the σ-H2 complexes form the best-known group of σ-complexes in which H2 is bound to the metal center in η2-fashion. Several well characterized examples of η2-silane and η2-borane complexes have also been reported. Moreover, in recent years, the carbon analogues of these complexes in which alkanes are coordinated through η2-C-H bonds to the metal center have been attracting the attention of organometallic chemists. An approach towards direct functionalization of σ-bonds in simple alkanes is the heterolytic activation of the C−H bond using highly electrophilic complexes. After all, for fine catalyst design and the selective functionalization of H−H, silanes or simple alkanes, it is necessary to understand the bonding nature of these σ-complexes in depth. Objectives The objectives of this work are as follows a) An attempt to stabilize and gain insights into the bonding nature and reactivity behavior of various sigma ligands on ruthenium center [Ru(η2-HX)(Tpms)(PPh3)2][OTf], (X = H, SiR (R = Me3 or Me2Ph) and CH3). b) Synthesis, characterization and reactivity studies of electrophilic ruthenium(II) complexes bearing (C6F5)2PCH2CH2P(C6F5)2 (dfppe) ligand towards heterolysis of H2. c) An approach towards preparation of insoluble molecular clusters from [Ru(P(OH)3)(dppe)2][OTf]2 complex and Zn, Cd and Cu acetates to realize σ-bond activation under heterogeneous conditions. Significant results In our attempts to gain insights into the bonding nature and reactivity behavior of σ-H2, silane and methane complexes, we followed two strategies to generate these complexes in solution. First, we synthesized and well characterized two new Ru(II)-complexes [RuH(Tpms)(PPh3)2] and [Ru(OTf)(Tpms)(PPh3)2], (OTf = trifluoromethane sulfonate) where Ru-H and Ru-OTf are the key reactive centers, followed by their subsequent reactions with electrophilic reagents such as HOTf, Me3SiOTf and CH3OTf and with H2, PhMe2SiH and CH4 at low temperature, respectively. These reactions finally resulted in the characterization of σ-H2 and σ-silane complexes, however, no σ-methane complex was observed even at low temperature (Scheme 1). Scheme 1 In order to realize highly eletrophilic metal complexes, a chelating fluorinated phosphine ligand 1,2-bis-(pentafluorophenylphosphino)ethane, (C6F5)2PCH2CH2P(C6F5)2 (dfppe) was employed and the synthesis and structural characterization of a series of new, Ru(II) hydride complexes [RuH(P(OMe)3)(bpy)(dfppe)][OTf], cis-[RuH2(dfppe)(PPh3)2] and [RuH(CO)Cl(PPh3)(dfppe)] were accomplished. Protonation reaction of the hydride complexes [RuH(P(OMe)3)(bpy)(dfppe)][OTf] (Scheme 2) and [RuH(CO)Cl(PPh3)(dfppe)] (Scheme 3) with HOTf at low temperature gave free H2 and five-coordinate species [Ru(P(OMe)3)(bpy)(dfppe)][OTf]2 and [Ru(CO)Cl(PPh3)(dfppe)][OTf], respectively. Surprisingly, in all these reactions, dihydrogen complexes are formed which were unobservable in which the H2 ligand was found to be highly labile. Reaction of is-[Ru(bpy)(dfppe)(OH2)(P(OMe)3)][OTf]2 with H2 however, resulted in the heterolytic activation of the H–H bond and concomitant protonation of H2O to give the corresponding hydride complex cis-[Ru(H)(bpy)(dfppe)(P(OMe)3)][OTf] and H3O+ (Scheme 2) . Scheme 2 Scheme 3 In an attempt to prepare insoluble molecular clusters in order to realize σ-bond activation under heterogeneous conditions, we studied the reactivity of highly electrophilic [Ru(P(OH)3)(dppe)2]2+ (dppe = (C6H5)2PCH2CH2P(C6H5)2) complex with various metal acetates. Usage of Zn(OAc)2.2H2O afforded a novel [Ru2(dppe)4P2(OH)2O4Zn2(OAc)(DMP)(OTf)][OTf]2 (Ru-Zn ) soluble bimetallic complex (Scheme 4) which was characterized in detail by NMR and single crystal X-ray crystallography. To achieve the expected insoluble molecular cluster further studies are required to tune the electronics and the sterics around the phosphorous acid moiety. Scheme 4

Current fossil fuels (Coal and Petroleum) based economy is not sustainable in the long run because of its dwindling resources, and increasing concerns of climate change due to excessive carbon dioxide (CO2) emission. To mitigate CO2 emission and climate change, scientists across the world have been looking for clean and sustainable energy sources. Among them hydrogen gas (H2) could be more promising because it is the most clean fuel and can be produced from cheap source (water) which is renewable and abundant. Nevertheless, the bottleneck for hydrogen economy is lying in the cost of hydrogen production from water. Still there are no any efficient systems developed which can deliver hydrogen from water in economically viable way. Meanwhile, recent research on old molecule ammonia-borane (H3N•BH3, AB) as hydrogen source has increased the hope towards the hydrogen economy, however, catalytic recycling (or efficient regeneration) of AB from the dehydrogenated product polyborazylene (PB or BNHx) is the biggest hurdle which prevents use of AB as practical hydrogen storage material. Therefore, it is imperative to understand the dehydrogenation pathways of ammonia-borane (or related amine-boranes) which lead to polymeric or oligomeric product(s). On the other hand, methane (CH4) is abundant (mostly untamed) but cleaner fuel than its higher hydrocarbon analogs. To develop highly efficient catalytic systems to transform CH4 into methanol (gas to liquid) is of paramount importance in the field of catalysis and it could revolutionize the petrochemical industry. Therefore, to activate CH4, it is crucial to understand its binding interaction with metal center of a molecular catalyst under homogenous condition. However, these interactions are too weak and hence σ–methane complexes are very elusive. In this context, σ-H2 and σ-borane complexes bear some similarities in σ-bond coordination (and four coordinated boranes are isoelectronic with methane) could be considered as good models to study σ-methane complexes. Studying the H−H and B−H bond activation in H2 and amine-boranes, respectively, would provide fundamental insights into methane activation and its subsequent functionalization. Moreover, the proposed methanol economy by Nobel laureate George Olah seems more promising because methanol can be produced from CH4 (CO2 as well). This in turn will gradually reduce the amount of two powerful greenhouse gases from the earth’s atmosphere. Thus, efficient and economic production of methanol from CH4 and CO2 is one of most challenging problems of today in the field of catalysis and regarded as the holy grails. Furthermore, very recently formic acid (HCOOH) is envisaged as a promising reversible hydrogen storage material because it releases H2 and CO2 in the presence of a suitable and efficient catalyst or vice versa under ambient conditions. Objective of the research work: Taking the account of the above facts, the research work in this thesis is mostly confined to utilize electrophilic Ru(II)-complexes for activation of small molecules such as ammonia-borane (H3N•BH3) [and related amine-borane (Me2HN•BH3)], hydrogen (H2), methane (CH4), formic acid (HCOOH) and carbon dioxide (CO2) and investigation of their mechanistic pathways using NMR spectroscopy under homogeneous conditions. Though these molecules are small, they have huge impacts on chemical industries (energy sector and chemical synthesis: drugs/natural products) and environment [CO2 and CH4 are potent green house gases] as well. However, they are relatively inert molecules, especially CH4 and CO2, and impose very tough challenges to activate and functionalize them into useful products under ambient conditions. The partial oxidation of the strong C−H bond in CH4 for its transformation into methanol under relatively mild condition using an organometallic catalyst is considered as a holy grail in the field of catalysis which is mentioned earlier. More importantly, to develop better and highly efficient homogeneous catalytic systems for the activation of these molecules, it is imperative to understand the mechanistic pathways using well defined homogeneous metal complexes. Thus, an understanding of the interaction of these inert molecules with metal center is obligatory. In this context, discovery of a σ-complex of H2 gave remarkable insights into H−H bond activation pathways and its implications in catalytic hydrogenation reactions. Subsequently, σ-borane complexes of amine-boranes were discovered and found to be relatively more stable because of stronger M−H−B interaction and hence act as good models to study the M−H−C interaction of elusive σ-methane complex. On the other hand, HCOOH, a promising hydrogen storage material and its efficient catalytic dehydrogenation/decarboxylation and CO2 hydrogenation back to HCOOH using well defined homogeneous catalysts could lead to a sustainable energy cycle. Therefore, it is quite significant to understand the mechanistic pathways of formic acid dehydrogenation/decarboxylation and carbon dioxide reduction to formic acid for the development of next generation efficient catalysts. Chapter highlights: Keeping all these in view, we carried out thorough studies on the activation of these small molecules by electrophilic Ru(II)-complexes. This thesis provides useful insights and perspective on the detailed investigation of mechanistic pathways for the activation of small molecules such as H3N•BH3 [and Me2HN•BH3], H2, CH4, HCOOH and CO2 using electrophilic Ru(II)-complexes under homogeneous conditions using NMR spectroscopy. In Chapter 1 we provide brief overview of small molecule activation using organometallic complexes. This chapter presents pertinent and latest results from literature on the significance of small molecule activation. Although there are several small molecules which need our attention, however, we have focused mainly on H3N•BH3 [and Me2HN•BH3], H2, CH4, HCOOH and CO2. In Chapter 2, we present detailed investigation of mechanistic pathways of B−H bond activation of H3N•BH3 and Me2HN•BH3 using electrophilic [RuCl(dppe)2][OTf] complex using NMR spectroscopy as a model for methane activation. In these reactions, using variable temperature (VT) 1H, 31P{1H} and 11B NMR spectroscopy we detected several intermediates en route to the final products at room temperature including a σ-borane complex. On the basis of elaborative studies using NMR spectroscopy, we have established the complete mechanistic pathways for dehydrogenation of H3N•BH3/Me2HN•BH3 and formation of B−H bond activated/cleaved products along with several Ru-hydride and Ru-(dihydrogen) complexes. Keeping the B−H bond activation of amine-boranes in view as a model for methane activation, we attempted to activate methane using [RuCl(dppe)2][OTf] complex. In addition, [Ru(OTf)(dppe)2][OTf] complex having better electrophilicity than [RuCl(dppe)2][OTf], was synthesized and characterized. The [Ru(OTf)(dppe)2][OTf] complex has highly labile triflate bound to Ru-metal and therefore its reactivity studies toward H2 and CH4 were carried out where H2 activation was successfully achieved, however, no any spectroscopic evidence was found for C−H bond activation of CH4. The Chapter 3 describes the synthesis and characterization of several Ru-Me complexes such as trans-[Ru(Me)Cl(dppe)2], [Ru(Me)(dppe)2][OTf], trans-[Ru(Me)(L)(dppe)2][OTf] (L = CH3CN, tBuNC, tBuCN, H2) with an aim to trap corresponding σ-methane intermediate at low temperature. However, interestingly, we observed spontaneous but gradual methane elimination and orthometalation of [Ru(Me)(dppe)2][OTf] complex at room temperature. We thoroughly investigated mechanistic details of methane elimination and orthometalation of [Ru(Me)(dppe)2][OTf] using VT NMR spectroscopy, NOESY and DFT calculations. Furthermore, H2 activation was confirmed unambiguously by [Ru(Me)(dppe)2][OTf] and Ru-orthometalated complexes using NMR spectroscopy under ambient conditions. An effort was also made to activate methane using Ruorthometalated complex in pressurized condition of methane in a pressure stable NMR tube. Moreover, preliminary studies on protonation reaction of [Ru(Me)(dppe)2][OTf] using VT NMR spectroscopy to trap σ-methane at low temperature was carried out which provided us some useful information on dynamics between proton and Ru-Me species. The Chapter 4 provides useful insights into the mechanistic pathways of dehydrogenation/decarboxylation of formic acid using [RuCl(dppe)2][OTf]. Catalytic dehydrogenation of HCOOH using [RuCl(dppe)2][OTf] was observed in presence of Hunig base (proton sponge). In addition, a complex [Ru(CF3COO)(dppe)2][OTf] was synthesized and characterized using NMR spectroscopy, and found to readily dehydrogenate HCOOH. Moreover, preliminary results on transfer hydrogenation of CO2 into formamide using [RuCl(dppe)2][OTf] as a precatalyst and tert-butyl amine-borane (tBuH2N•BH3) as secondary hydrogen source was confirmed using 13C NMR spectroscopy. The mechanisms were proposed for HCOOH dehydrogenation and transfer hydrogenation of CO2 based on our NMR spectroscopic studies. Furthermore, a few test reactions of transfer hydrogenation of selected alkenes such as cyclooctene, acrylonitrile, 1-hexene using [RuCl(dppe)2][OTf] as pre-catalyst and tert-butyl amine-borane (tBuH2N•BH3) as secondary hydrogen source showed quantitative conversion to hydrogenated products.

L’objectif de ce travail a été de mettre en place un système original capable de produire et stocker l’énergie à partir de la lumière dans un dispositif unique. Pour ce faire, nous avons choisi d’adapter l’électrode photo-sensible d’une DSSC sur un système d’accumulateur électrochimique. La première partie de ce travail a été de mettre en place la technique de spectroscopie EIS-λ, basée sur la spectroscopie d’impédance électrochimique couplée à un balayage en longueur d’onde de la lumière incidente. L’objectif de cette mesure est d’identifier et de quantifier les différents mécanismes de transfert électroniques, photo-dépendant ou non, ayant lieu à la surface de l’électrode photo-sensible, ainsi que les processus de désactivation des états excités des sensibilisateurs. Nous nous sommes ensuite penchés sur la recherche des conditions optimales d’utilisation de deux coadsorbants — l’acide bismethoxyphenyl phosphinique ou BMPP et l’acide chenodesoxycholique ou CDCA — avec le sensibilisateur de référence N719. Nous avons également quantifié leurs activités shield et anti-π-stacking grâce à la technique EIS-λ. Nous avons ainsi réalisé une DSSC présentant un rendement de photo-conversion de 8,3% en utilisant le co-adsorbant BMPP dans un ratio [co-ads]/[S] = 1, contre 7,2% dans les conditions de référence — avec le coadsorbant CDCA utilisé dans un ratio [co-ads]/[S] = 10. Par la suite, nous avons imaginé et synthétisé trois complexes de ruthénium hydrophiles originaux dont nous avons testé le pouvoir de photo-conversion dans des DSSC à électrolyte 100% aqueux, en présence des co-adsorbants sélectionnés. Ces systèmes ont permis de dépasser le pouvoir de photo-conversion du sensibilisateur N719, dans l’eau, avec un rendement maximal obtenu de 1,31%. Enfin, nous avons sélectionné la meilleure combinaison sensibilisateur / co-adsorbant afin de réaliser une électrode photo-sensible que nous avons implémentée dans un système original d’accumulateur électrochimique à base d’électrolytes aqueux. Le système ainsi mis en place constitue aujourd’hui le premier dispositif fonctionnel d’accumulateur 100% aqueux photo-rechargeable à partir d’une électrode mésoporeuse photo-sensibilisée / The aim of this work was to imagine and to develop a new system able to produce and store energy from sunlight in a single device. For this purpose, the photo-sensitive electrode of a DSSC has been adapted to an electrochemical accumulator. The first part of this work was to develop a new spectroscopic technique, called EIS-λ and based on electrochemical impedance spectroscopy combined to incident light wavelength sweep. This technique has proved its capacity to identify and quantify the different mechanisms of electron transfer over the surface of the semiconducting material and their dependency to incident wavelength, together with the various deactivation processes of the excited state of the sensitizer. Then, we investigated the best conditions to use two different co-adsorbents — namely bis-methoxyphenylphosphinic acid, or BMPP, and chenodesoxycholic acid, or CDCA — with the reference sensitizer N719. The shield and anti-π-stacking activities of the two coadsorbents has been characterized using EIS-λ technique. DSSC with a photo-conversion yield of 8,3% has been prepared in the lab using BMPP in a ratio [co-ads]/[S] = 1 while reference conditions – namely with CDCA in a ratio [co-ads]/[S] = 10 — only gave 7,2%. Besides, we have designed and synthesized three original hydrophilic ruthenium complexes, then tested their photo-conversion properties in DSSC with 100% aqueous electrolytes. Such systems, with the selected co-adsorbents, allowed 1,31% photo-conversion yield to be obtained, which is two times larger than the efficiency exhibited by N719 in the same electrolyte conditions. Finally the best combination sensitizer / co-adsorbent has been selected to achieve a photo-sensitive electrode which has been implemented in an original electrochemical accumulator with aqueous electrolytes. This system represents the first functional device of a 100% aqueous accumulator, which is photo-reloadable with a photosensitized mesoporous electrode