Darbe tiriami mažaanglio plieno S235J2 (LST EN 10025:2004) suvirintų siūlių pasikeitimai, plieną apvirinant skirtingais glaistytaisiais elektrodais ir suvirinimo režimais. Tyrimų metu buvo naudojami AV-23 ir AV-66 glaistytieji elektrodai bei keičiamas trumpojo jungimo srovės stipris. Nustatytas ryšys tarp metalo įvirinimo gylio, rumbelės aukščio, išlydytų lašų dydžio, išlydytų lašų kiekio, trumpojo jungimo trukmės ir trumpojo jungimo srovės dydžio. Gauti tyrimų rezultatai, nubraižyti priklausomybių grafikai ir pateiktos išvados. Darbą sudaro: įvadas, literatūros apžvalga, eksperimentuose naudojama įranga ir medžiagos, tyrimo metodika, tyrimų metu gauti rezultatai, grafikai, išvados, literatūra. Darbo apimtis: 83 p. teksto, 73 iliustr., 18 lent., 23 bibliografiniai šaltiniai. / In final work was analyzed the changes of seams properties of steel S235J2 (LST EN 10025:2004), produced by welding with different technology are discussed. Samples were welded by hand arc welding, using AV-23 and AV-66 welding electrodes. The welded seams were made by changing short-circuit current. The duration of weld depth, ridge height, metal drop size, metal drop frequency, short-circuit time and short-circuit current value are determinated. The results of the research are given in graphs, final conclusions are also written. Structure: the introduction, survey of the related literature, equipment and materials, description of the methodology, results of research, graphs of the results, conclutions, references. Thesis consist of: 83 p. text, 73 pictures, 18 tables, 23 bibliographical entries.

Malgré plusieurs décennies d'études expérimentales et numériques sur la tenue en fatigue d'assemblages soudés, cette problématique demeure une préoccupation principale de l'industrie automobile. En effet, de nombreux composants aux géométries complexes (e.g. berceaux) sont obtenus à partir de pièces soudées et constituent des éléments de sécurité pour lesquels aucune défaillance ne peut être acceptée. Malgré les progrès en modélisation numérique, des essais sont toujours nécessaires afin de fournir des données sur éprouvettes « simples » afin d'alimenter les modèles numériques, mais aussi de démontrer le bon dimensionnement des structures. Les procédures classiques d'essais de fatigue sont coûteuses en temps et nécessitent la destruction de plusieurs pièces. La méthode dite d'auto-échauffement permet de réduire significativement le temps d'essai et propose une approche non destructive. Cette méthode consiste à mesurer l'évolution de température en surface de la structure étudiée au cours du chargement cyclique. Cette approche permet de tirer avantage du signal thermique macroscopique afin de mettre en évidence la micro-plasticité responsable de la rupture par fatigue. Les objectifs du travail présenté sont de déterminer si un lien peut être réalisé entre les mesures de température et la tenue en fatigue d'assemblages soudés, puis d'étudier l'influence de paramètres sur la tenue en fatigue grâce à la méthode proposée. Un protocole expérimental est d'abord proposé afin de mesurer l'évolution de température des mini-structures soudées sous sollicitation cyclique. Une première analyse de la réponse thermique de simples tôles d'acier sous chargement cyclique de faible amplitude est proposée afin de valider un modèle déterministe de champ de source à la fois pour des sollicitations de traction et de flexion. Ces essais permettent par la suite de décrire correctement le comportement thermique de la matière de base des éprouvettes soudées hors du cordon de soudure. Le modèle est alors étendu à l'étude d'éprouvettes soudées, avec la prise en compte de la dissipation de la zone soudée. Une fois le champ de source identifié à partir du modèle, son évolution en fonction de l'amplitude du chargement appliqué mène à une courbe d'auto-échauffement. L'analyse de cette courbe permet une bonne estimation de la limite en fatigue de l'éprouvette soudée après seulement quelques heures d'essais. La méthode est alors appliquée à d'autres configurations de mini-structures soudées afin d'étudier l'influence du grenaillage et d'un gradient de contrainte en zone critique sur la tenue en fatigue. Finalement, la procédure d'essai est appliquée afin de déterminer la tenue en fatigue d'une pièce industrielle, un triangle de suspension mécano-soudé. À cause des mauvaises conditions aux limites thermiques sur une telle structure, une autre méthode est proposée afin de déduire une première estimation du champ de source sur toute la surface observée à partir des mesures thermiques. Cette estimation mène à l'identification de la zone critique en fatigue de la structure et à une première bonne estimation de sa limite en fatigue. / Fatigue design of weld assemblies still remains of prior concern in the automotive industry, despite several decades of experimental, theoretical and numerical body of work. Actually, many complex components (e.g. front and rear axles) are embedded thanks to welding process. Such welded assemblies are expected to be designed as high-safety parts, for which any fatigue failure is supposed to be prevented. Despite numerical modelling is more and more effective, experimental tests are still necessary in order to provide basic design data and at last to prove the design reliability. Standard fatigue tests procedures are sensibly time consuming, are usually destructive and need for several specimens in order to manage reliable results. Conversely, the so-called self-heating tests offer the opportunity to dramatically shorten the test duration and save specimens because it is a non-destructive method. It consists in measuring the temperature evolution of the structure surface during cyclic loading. Such an approach allows to take advantage of the macroscopic thermal signature of microscopic plasticity processes responsible for fatigue damage. The purpose of the present work is the determination of a correlation between thermal measurement and fatigue properties of welded structures, and then studying the influence of parameters on fatigue properties with the developed method. An experimental protocol is first proposed to measure the temperature of the tested specimen under cyclic loading. A first analysis of the thermal response of standard steel sheet specimen under low load amplitude is proposed in order to validate a deterministic heat source model for both tensile and bending tests. These tests allow us to correctly describe the thermal behavior of the base material of welded specimen away from the joint. Then, the model is extended to welded specimen in order to take into account the dissipation of the welded area. Once the dissipative heat source is identified thanks to the model, its evolution with the applied loading leads to a self-heating curve allowing an estimation of the fatigue limit of the welded specimen after only few hours of test. The method is then applied to other configurations of welded specimens in order to study the effects of shot peening and stress gradient on fatigue properties. Finally, the testing procedure is applied for the determination of an industrial component fatigue properties, a welded car wishbone. Due to the bad heat boundary condition, another analysis is proposed to estimate the heat source along the entire component. This estimation leads to the determination of the weakest area of the structure concerned by fatigue and a first good estimation of its fatigue limit.

As the fidelity of computer generated imagery has increased, the need to digitally create convincing natural phenomena like fluids has become fundamental to the entertainment production industry. Because fluids are complex, the underlying physics must be computationally simulated. However, because a strictly physics-based approach is both computationally expensive and difficult to control, it does not lend itself well to the way artists and directors like to work. Directors require control to achieve their specific artistic vision. Furthermore, artistic workflows rely on quick iteration and the ability to apply changes late in the production process. In this dissertation we present novel techniques in adaptive simulation and fluid post-processing to improve artistic workflows for fluid simulation. Our methods reduce fluid simulation iteration time and provide a new way for artists to intelligently resize a wide range of volumetric data including fluid simulations. To reduce iteration time, we present a more cache-friendly linear octree structure for adaptive fluid simulation that reduces the overhead of previous octree-based methods. To increase the viability of reusable effects libraries, and to give artists intuitive control over simulations late in the production process we present a ``fluid carving" technique. Fluid carving uses seam carving methods to allow intelligent resizing on a variety of fluid phenomena without the need for costly re-simulation. We present methods that improve upon traditional seam carving approaches to address issues with scalability, non-rectangular boundaries, and that generalize to a variety of different visual effects data like particles, polygonal meshes, liquids, smoke, and fire. We achieve these improvements by guiding seams along user-defined lattices that can enclose regions of interest defined as OpenVDB grids with a wide range of shapes. These techniques significantly improve artist workflows for fluid simulation and allow visual entertainment to be produced in a more intuitive, cost-effective manner.

The aim of this work is to explore the joining of inspiration, such as different garments and materials, in relation to commonly used methods in the fashion industry when it comes to joining of different trends and references such as clashing and collaging. The work proposes a new method and framework for join- ing inspiration which generates different results depending on what kind of inspiration that is put in to it. A garment can roughly be broken down to a silhouette and shape, materials and details. The material put in to the method and framework is based on information from trend seminars for SS16, because that is how many of today’s trend-oriented fashion brands get there inspiration. Trendy garment silhouettes are mixed through processes of computational morphing in Adobe Flash by a generation of spin in the mixing process were shape hints are used in a new manner. The new generated silhouettes are further developed and materialized through procedures of interpretation and figuration. Different trendy materials are melded in a direct and concrete way through mixed media techniques such as laminating, fusing and vacuum-techniques. The final steps of the method is a garment shape and material synthesis with starting point in the generated shape with the final material. The projects intention is to let the physical experimentation, interpretation and figuration play a central role in the research process for new types of methods, garments, materials and expressive pos- sibilities.

Coal seam gas has been recognised as a new, potential energy resource in New Zealand. Exploration and assessment programmes carried out by various companies have evaluated the resource and indicated that this unconventional gas may form a part of New Zealand's future energy supply. This study has delineated some of the controls between coal properties and gas content in coal seams in selected New Zealand locations. Four coal cores, one from Huntly (Eocene), two from Ohai (Cretaceous) and one from Greymouth (Cretaceous), have been sampled and analysed in terms of gas content and coal properties. Methods used include proximate, sulphur and calorifc value analyses; ash constituent determination; rank assessment; macroscopic analysis; mineralogical analysis; maceral analysis; and gas analyses (desorption, adsorption, gas quality and gas isotopes). Coal cores varied in rank from sub-bituminous B-A (Huntly); sub-bituminous C-A (Ohai); and high volatile bituminous A (Greymouth). All locations contained high vitrinite content (~85 %) with overall relatively low mineral matter observed in most samples. Mineral matter consisted of both detrital grains (quartz in matrix material) and infilling pores and fractures (clays in fusinite pores; carbonates in fractures). Average gas contents were 1.6 m3/t in the Huntly core, 4.7 m3/t in the Ohai cores, and 2.35 m3/t in the Greymouth core. The Ohai core contained more gas and was more saturated than the other cores. Carbon isotopes indicated that the Ohai gas composition was more mature, containing heavier 13C isotopes than either the Huntly or Greymouth gas samples. This indicates the gas was derived from a mixed biogenic and thermogenic source. The Huntly and Greymouth gases appear to be derived from a biogenic (by CO2 reduction) source. The ash yield proved to be the dominant control on gas volume in all locations when the ash yield was above 10 %. Below 10 % the amount of gas variation is unrelated to ash yield. Although organic content had some influence on gas volume, associations were basin and /or rank dependant. In the Huntly core total gas content and structured vitrinite increased together. Although this relationship did not appear in the other cores, in the Ohai SC3 core lost gas and fusinite are associated with each other, while desmocollinite (unstructured vitrinite) correlated positively with residual gas in the Greymouth core. Although it is generally accepted that higher rank coals will have higher adsorption capacities, this was not seen in this data set. Although the lowest rank coal (Huntly) contains the lowest adsorption capacity, the highest adsorption capacity was not seen in the highest rank coal (Greymouth), but in the Ohai coal instead. The Ohai core acted like a higher rank coal with respect to the Greymouth coal, in terms of adsorption capacity, isotopic signatures and gas volume. Two hypothesis can be used to explain these results: (1) That a thermogenically derived gas migrated from down-dip of the SC3 and SC1 drill holes and saturated the section. (2) Rank measurements (e.g. proximate analyses) have a fairly wide variance in both the Greymouth and Ohai coal cores, thus it maybe feasible that the Ohai cores may be higher rank coal than the Greymouth coal core. Although the second hypothesis may explain the adsorption capacity, isotopic signatures and the gas volume, when the data is plotted on a Suggate rank curve, the Ohai coal core is clearly lower rank than the Greymouth core. Thus, pending additional data, the first hypothesis is favoured.

No description available.

<p>The purpose of this master thesis was to study different content-aware video retargeting techniques, concentrating on a generalization of seam carving for video. Focus have also been put on the possibility to combine different techniques to achieve better retargeting of both multi-shot video and single-shot video. This also involved significant studies of automatic cut detection and different measures of video content. The work resulted in a prototype application for semi-automatic video retargeting, developed in Matlab. Three different retargeting techniques, seam carving, automated pan & scan and subsampling using bi-cubic interpolation, have been implemented in the prototype. The techniques have been evaluated and compared to each other from a content preservation perspective and a perceived quality perspective.</p> / <p>Syftet med examensarbetet har varit att studera tekniker för ändring av bredd/höjd-förhållandet i videosekvenser, där hänsyn tas till innehållet i bilderna. Fokus har lagts på en generalisering av "seam carving" för video och möjligheterna att kombinera olika tekniker för att nå bättre kvalitet både för videosekvenser som består av endast ett, eller flera, klipp. Detta innefattade således också omfattande studier av automatisk klippdetektering och olika mått av videoinnehåll. Arbetet har resulterat i en prototypapplikation utvecklad i Matlab för halvautomatisk förändring av bildförhållande där hänsyn tas till innehållet i sekvenserna. I prototypen finns tre metoder implementerade, "seam carving", automatiserad "pan & scan" och nedsampling med bi-kubisk interpolering. Dessa metoder har utvärderats och jämförts med varandra från ett innehållsbevarande perspektiv och ett kvalitetsperspektiv.</p>

Coal Seam Gas (CSG) is a form of natural gas (mainly methane) sorbed in underground coal deposits. Mining this gas involves drilling a well directly into an underground coal seam, and pumping out the water (CSG water) flowing through it. Presently, CSG is under exploration in New Zealand (NZ); however, there is concern about CSG water disposal in NZ mainly because of the controversy that this activity has generated in some basins in the United States (US). The first part of this thesis studies CSG water from a well in Maramarua (NZ) and compares it to water from US basins. The NZ CSG water from this well had high pH (7.8), alkalinity in the order of 360 mg/l as CaCO₃, high sodium (334 mg/l), bicarbonate (435 mg/l), and chloride (146 mg/l). These ions also occur in US CSG waters, and their concentrations follow the same trend - high sodium, bicarbonate, and chloride with low calcium, magnesium, and sulphate concentrations. Prior to this work, little detailed analyses of CSG water quality variability from a well had been carried out. A Factor Analysis of 33 Maramarua samples was conducted and revealed that about one third of the variations were due to sample degassing, which induced calcium carbonate precipitation - this was supported by experimental work (sample sparging) and geochemical modelling (MINTEQA2). This finding is important for CSG water management because, as calcium concentrations decrease, higher SAR values are generated, and this can cause problems if CSG waters are disposed on land. In the second part, this thesis assesses the potential environmental effects of disposing CSG waters in NZ by formulating management options and a simple wastewater treatment system. This was carried out by studying the ecological response (soils, plant, and aquatic life) resulting from CSG water disposal operations in the US, and by applying relevant salinity and sodicity guidelines to the interaction between soils and CSG waters from Maramarua. This work showed that similar problems are likely to occur in NZ if CSG water disposal takes place without proper controls. Such a study has never been carried out in a region before actual CSG development has taken place, so this work shows how to quantify the effects arising from CSG water disposal prior to full scale production. This can be particularly useful for CSG stakeholders wanting to develop this resource in other regions around the world. A simple treatment system using Ngakuru zeolites has proven effective in reducing the SAR of Maramarua CSG water. Laboratory results indicate that these zeolites work by exchanging sodium cations in the water by other cations contained within the zeolite structure but with slow ion exchange kinetics. The calculated sodium absorption capacity for these natural zeolites ranged from 11.3 meq/100g to 16.7 meq/100g (flow-through conditions without previous regeneration). In addition, these experiments showed that the ion exchange process is accompanied by some dissolution (sulphate, boron, TOC, sodium, calcium, magnesium, potassium and reactive silica), but mainly at the beginning of the treatment process. Nevertheless, using this system, 180 grams of zeolite material were used to treat an initial 1.83 litres of Maramarua CSG water thus reducing potential soil infiltration problems to nil. As more CSG water was treated, the zeolites kept reducing SAR values but at a lesser rate until 4.53 litres of CSG water had been treated. A step-by-step methodology to assess treatment design options for these materials has been developed and will aid future researchers and engineers. This thesis presents the first comprehensive study of CSG water management in NZ. It also presents an ion exchange treatment system using natural zeolites already available in NZ. In conclusion, the research finds that, whether through adequate management or active treatment, CSG waters can be safely disposed without creating major environmental problems, and can even be used in beneficial applications.

Coal seam gas has been recognised as a new, potential energy resource in New Zealand. Exploration and assessment programmes carried out by various companies have evaluated the resource and indicated that this unconventional gas may form a part of New Zealand's future energy supply. This study has delineated some of the controls between coal properties and gas content in coal seams in selected New Zealand locations. Four coal cores, one from Huntly (Eocene), two from Ohai (Cretaceous) and one from Greymouth (Cretaceous), have been sampled and analysed in terms of gas content and coal properties. Methods used include proximate, sulphur and calorifc value analyses; ash constituent determination; rank assessment; macroscopic analysis; mineralogical analysis; maceral analysis; and gas analyses (desorption, adsorption, gas quality and gas isotopes). Coal cores varied in rank from sub-bituminous B-A (Huntly); sub-bituminous C-A (Ohai); and high volatile bituminous A (Greymouth). All locations contained high vitrinite content (~85 %) with overall relatively low mineral matter observed in most samples. Mineral matter consisted of both detrital grains (quartz in matrix material) and infilling pores and fractures (clays in fusinite pores; carbonates in fractures). Average gas contents were 1.6 m3/t in the Huntly core, 4.7 m3/t in the Ohai cores, and 2.35 m3/t in the Greymouth core. The Ohai core contained more gas and was more saturated than the other cores. Carbon isotopes indicated that the Ohai gas composition was more mature, containing heavier 13C isotopes than either the Huntly or Greymouth gas samples. This indicates the gas was derived from a mixed biogenic and thermogenic source. The Huntly and Greymouth gases appear to be derived from a biogenic (by CO2 reduction) source. The ash yield proved to be the dominant control on gas volume in all locations when the ash yield was above 10 %. Below 10 % the amount of gas variation is unrelated to ash yield. Although organic content had some influence on gas volume, associations were basin and /or rank dependant. In the Huntly core total gas content and structured vitrinite increased together. Although this relationship did not appear in the other cores, in the Ohai SC3 core lost gas and fusinite are associated with each other, while desmocollinite (unstructured vitrinite) correlated positively with residual gas in the Greymouth core. Although it is generally accepted that higher rank coals will have higher adsorption capacities, this was not seen in this data set. Although the lowest rank coal (Huntly) contains the lowest adsorption capacity, the highest adsorption capacity was not seen in the highest rank coal (Greymouth), but in the Ohai coal instead. The Ohai core acted like a higher rank coal with respect to the Greymouth coal, in terms of adsorption capacity, isotopic signatures and gas volume. Two hypothesis can be used to explain these results: (1) That a thermogenically derived gas migrated from down-dip of the SC3 and SC1 drill holes and saturated the section. (2) Rank measurements (e.g. proximate analyses) have a fairly wide variance in both the Greymouth and Ohai coal cores, thus it maybe feasible that the Ohai cores may be higher rank coal than the Greymouth coal core. Although the second hypothesis may explain the adsorption capacity, isotopic signatures and the gas volume, when the data is plotted on a Suggate rank curve, the Ohai coal core is clearly lower rank than the Greymouth core. Thus, pending additional data, the first hypothesis is favoured.

The research presented in this thesis is an explorative study into the basic concepts and the effects of dance movement psychotherapy (DMP) intervention on the attunement behaviours of children and adolescents with autism spectrum disorders (ASD). From a retrospective analysis of positively evaluated single cases of DMP with ASD participants, movement markers of interpersonal relating behaviours have been formulated in terms of Social Engagement and Attunement Movement (SEAM) behaviours. These were organised into an observation scale, and used subsequently to generate nominal observation data on the behaviours of a small sample of children with ASD. Evaluation with the SEAM observation scale yielded a significant increase of SEAM behaviours in the course of the dance therapy. Retrospective analysis of the actions of the therapist throughout four single cases of DMP with ASD participants yielded a specific approach that was described as Shared Movement Approach (SMA). SMA has been specified as an improvisation based method of DMP that takes the child's interpersonal attunement and engagement behaviours as cues for the therapist to accommodate her interventions, so that the child's interpersonal relating behaviours are facilitated and supported. Through her kinaesthetically informed interventions the DMP therapist contributes to an increase of interpersonal engagement and attunement by the ASD participant from within the shared movement actions. The SEAM observation scale was explored on conceptual clarity and consistency in a group of independent movement analysts, and interrater agreement was used as an indication of its contents validity. An interval rating procedure with the SEAM scale yielded the best results on interrater agreement as expressed in Cohen's kappa. The Shared Movement Approach and the SEAM observation scale were then tested for replication of outcome on SEAM behaviours within four repeated single subject cases in a pilot study in a Dutch outpatient clinical setting. The outcome monitoring yielded the replication of increase of interpersonal relating behaviours as measured with the SEAM observation scale. Within subject therapy outcomes, although diverse in their individual profiles, were found to be significant when analysed with non-parametric tests. Group averages showed a significant increase of SEAM behaviours. The effects beyond therapy were evaluated with the somatic and social sub-scales of the Child Behaviour Checklist (CBCL) and the Social Responsiveness Scale (SRS), showing individual differences and a significant problem reduction on average. The outcomes as experienced by the juvenile participants were evaluated with the somatic and social sub-scales of the Youth Self Report (YSR), which on average showed a significant decrease of experienced social and somatic problems. The results obtained are discussed in view of current theories on experiential approaches and concepts for psychotherapy with an ASD population.