The presented diploma thesis is focused on preparation of nanoparticles and nanofibres with natural UV filters. Liposomes with encapsulated aqueous, ethanol and lipid extracts were prepared. Nanofibers from PHB containing lipid extract were prepared too. As a part of this work, an overview of natural sources with potential effects as UV filters were introduced. Moreover, nanoparticles and nanofibers and methods of their characterization were described. Size, polydisperse index and colloid stability of prepared nanoparticles were characterized via DLS. In experimental part aqueous, ethanol and lipid extracts were prepared from roasted coffee, green coffee and cascara. These extracts were spectrophotometrically characterized for the content of polyphenols, flavonoids, antioxidant activity, tannins and their SPF. Liposomes and liposomes containing PHB with these extracts were prepared and the encapsulation effectivity, short–term and long–term stability as well as SPF of nanoparticles were determined. Nanofibers from PHB containing lipid extracts were prepared via electrospinning and forcespinning methods. Prepared nanofibers were examined via FTIR–ATR. Antioxidant activity, short–term and long–term stability were determined spectrophotometrically. From selected nanoparticles, emulsions and gels were prepared and their SPF was also determined. Three types of emulsions with the best SPF were selected and tested on volunteers. Sedimentation stability of emulsions was tested by analytical centrifuge. Finally, cytotoxicity of selected nanoparticles and nanofibers was tested via MTT assay using human keratinocytes.

This presented diploma thesis is focuses on preparation and characterization of biomaterials with natural UV filters. The theoretical part is aimed at effects of sunlight on the skin and how to avoid these effects by using cosmetic products. The materials and methods for extraction of lipid part of the selected vegetable and microorganism species and methods for preparation and characterization of nanoparticles and emulsions were characterized. The practical part deals with extraction of lipid part of selected vegetable and microorganism species. The liposome particles with encapsulated active compounds were prepared. The particle size, polydispersity index, colloidal stability, encapsulation efficiency, SPF, antioxidant capacity, phospholipid content and cytotoxic effect on human keratinocytes were observed. These particles were used for preparation of the resulting emulsions. Their protection level on UV light were set and stability were tested by using analytical centrifugation.

Email is an essential form of communication for organizations. Nevertheless, with so much popularity came many challenges. These emails usually carry sensitive data that might cause significant harm if they get compromised. Besides, spam and phishing emails that continually reach the employees’ inbox masquerading as a trusted entity due to the lack of authentication mechanisms are also considered a significant threat for organizations today. Such threats are phishing using email domain forgery attack, redirecting emails to a mail server that is under the attacker’s control, and connection eavesdropping. The research aimed to investigate the vulnerability of approximately 2000 organizations within Sweden against those attacks. Toward that end, the quantity and quality of the following email security mechanisms SPF, DKIM, DMARC, STARTTLS, DNSSEC, and DANE were examined through a case study. Also, the adoption of these mechanisms was investigated, whether it varies based on different factors such as organization size, sector, and location. The research findings indicated that the average adoption rate by the tested organizations was approximately 50%. Furthermore, the result demonstrated that there were no differences in the adopted mechanisms based on the studied factors that the results were quite similar among the tested groups. It concluded that there is a lack of protection mechanisms, which made the majority of the tested organizations vulnerable to different types of email attacks.

Os bambus nativos do Brasil, com exceção de seu uso como material de construção, têm encontrado poucas aplicações devido à falta de conhecimento abrangente sobre sua composição química e atividades biológicas. Neste projeto, foram pesquisados extratos etanólicos de colmos e folhas de cinco espécies de bambu do Sudeste brasileiro: Aulonemia aristulata (Döll) McClure., Chusquea bambusoides Rupr. Ex Döll, Chusquea capituliflora Trin. var. pubescens McClure, Chusquea meyeriana Rupr. e Merostachys pluriflora Munro ex E.G. Camus, para avaliar sua atividade antioxidante, composição química, e atividade foto-protetora. O potencial antioxidante das plantas foi avaliado através do método do sequestro do radical livre DPPH, onde os extratos apresentaram valores de CI50 entre 137 e 260 µg/mL. O teor de compostos fenólicos e flavonoides foi determinado através dos métodos com o reagente Folin-Ciocalteau e AlCl3. O conteúdo de fenólicos totais variou de 43 a 87 µg equivalentes de ácido gálico por mg de extrato seco. O extrato mais rico em flavonoides foi o de C. bambusoides, com 6,44 µg equivalentes de quercetina por mg da amostra. A análise preliminar da composição química dos extratos foi realizada por cromatografia em camada delgada, excluindo a presença de flavonoides comuns nos bambus asiáticos. A eficácia de proteção solar e a foto-estabilidade in vitro das formulações cosméticas com extratos de bambus (10%) e filtros solares comerciais foi estimada por espectrofotometria de reflectância difusa com esfera de integração em placas de polimetilmetacrilato. Os dados obtidos foram convertidos em fator de proteção solar (FPS) antes e depois da irradiação, que variaram respectivamente entre 34,52 86,15 e 14,33 44,44. A seguir, foi avaliada a citotoxicidade frente a uma linhagem de células epiteliais de retina humana (RPE) do extrato mais promissor de colmos de M. pluriflora, sendo o mesmo classificado como não-tóxico. O fracionamento desse extrato potencializou a ação antioxidante e foto-protetora, aumentando a concentração das substâncias ativas no extrato selecionado. Adicionalmente, foram realizados outros ensaios cromatográficos (CG-EM e CLAE), os quais identificaram ácidos graxos, ácidos fenólicos e produtos característicos de decomposição de ligninas como os compostos principais nas frações ativas. Uma amostra de formulação cosmética com extrato de colmos M. pluriflora (5%) e com filtros solares foi enviada para Instituto de Pesquisa IPClin, onde foram realizados testes de FPS e foto-irritação in vivo. A média de FPS in vivo da formulação foi 23, enquanto, o FPS da formulação controle, 15. Devido a sua abundância, o ácido p-cumárico, pode ser o principal responsável pela atividade observada. O produto com o extrato não causou irritação da pele dos voluntários após a irradiação. Os resultados indicam que as espécies de bambu do Brasil aumentam o FPS dos filtros solares comerciais e são seguros para o uso externo, com potencial para a produção de cosméticos fotoprotetores. / Differently of Asian species, the native Brazilian bamboo speciesare mostly used in the construction industry, with no pharmaceutical applications described, as their chemical composition and biological effects are unknown. In this project, we evaluated the chemical composition, antioxidant and photoprotective activity of ethanolic extracts from five bamboos from the South of Brazil: Aulonemia aristulata (Döll) McClure., Chusquea bambusoides Rupr. Ex Döll, Chusquea capituliflora Trin. var. pubescens McClure, Chusquea meyeriana Rupr. and Merostachys pluriflora Munro ex E.G. Camus. DPPH radical scavenging activity assay was used to estimate the antioxidant potencial of the plants, and the IC50 received varied between 137 and 260 µg/mL. Total phenolics and flavonoids contents were determined using Folin-Ciocalteau and AlCl3 reagents. The bamboo dry extracts showed between 43 - 87 µg gallic acid equivalents and up to 7 µg of quercetin equivalents per mg of the sample. Preliminary analysis of the chemical composition done by Thin Layer Chromatography in silica plates, indicated that the most common flavonoids found in Asian species were not present in the Brazilian bamboos. Photoprotective activity of the developed cosmetic formulations, containing commercial solar filters and 10% of the extracts, was evaluated by diffuse transmittance with an integrating sphere on PMMA plates. The samples presented Sun Protection Factor (SPF) from 34 86 before to 14 44 after the irradiation, and a broad spectrum of action. The most promising extract, M. pluriflora culms, was chosen for the second part of the project, which involved further studies on its composition and in vivo photoprotective activity. The selected extract had its cytotoxicity evaluated, to confirm its safety, against retinal pigmented epithelium (RPE) cells. The extract was fractioned, and the fractions were evaluated for their total phenolic and flavonoid contents. Fractions separation increased the quantity of the active compounds and, consequently, their antioxidant and photoprotective effect. Additionally, Gas Chromatography-Mass Spectrometry and High-Performance Liquid Chromatography analysis of the fractions showed the presence of fatty acids, phenolic acids and products of lignin decomposition as the main compounds. Due to its abundance, p-coumaric acid might be responsible for the antioxidant activity and photoprotection of the bamboo extract. The photoprotective formulation with 5% of the extract was sent to a clinical research center, IPClin, to have their SPF in vivo and photosensitivity effect estimated on healthy volunteers. The in vivo SPF was 23 for the extract formulation and 15 for the control with only commercial filters. These results indicated that native bamboo species can be a source of natural photoprotective substances, which would prevent the addition of high amount of synthetic solar filters, that can easily degrade and cause skin allergies and irritation.

Filtros orgânicos são amplamente utilizados em formulações fotoprotetoras, com habilidade de absorver radiações ultravioleta (UV). Contudo, parte destes compostos possuem limitações, como: fotoinstabilidade, permeação cutânea e fotossensibilização e entre outros. Este trabalho envolveu a síntese de matriz mesoporosa do tipo SBA-15, encapsulação/incorporação de ρ-metoxicinamato de octila (MCO), benzofenona-3 (BZF-3) e avobenzona (AVO) na SBA-15 para aplicação em formulações fotoprotetoras. Fez-se a determinação da eficácia in vitro dos filtros encapsulados/incorporados combinados a ingrediente cosmético; o preparo de bastão fotoprotetor e determinação eficácia estimada; a avaliação do potencial de irritação ocular dos bastões por HET-CAM - Hen\'s Egg Test - Chorioallantoic Membrane, e a avaliação da permeação/retenção cutânea e perfil de biodistribuição dos filtros. Para a caracterização dos materiais foram empregadas técnicas físico-químicas e analíticas. As medidas de adsorção/dessorção de N2 mostrou que as amostras dos filtros solares encapsulados/incorporados apresentaram diminuição na área superficial e volume de poro (V), indicando que os filtros solares foram encapsulados/incorporados na superfície e nos poros da SBA-15. Os resultados de Espalhamento de raios X a baixo ângulo evidenciaram que os filtros solares não afetaram a estrutura hexagonal da SBA-15. Por TG/DTG e análise elementar foi possível determinar a quantidade de filtros solares na superfície e nos mesoporos da SBA-15. Enquanto, as curvas DSC e DTA revelaram aumento na estabilidade térmica da AVO e BZF-3, quando encapsulados/incorporados. Os resultados da eficácia fotoprotetora in vitro monstraram que a combinação dos três filtros solares encapsulados/incorporados na SBA-15 promoveram aumento de 52% no fator proteção solar (FPS), enquanto que, na formulação fotoprotetora contendo os três filtros encapsulados/incorporados, o aumento foi de 94%. O ensaio de HET-CAM evidenciou que os bastões contendo SBA-15 e os filtros encapsulados/incorporados não foram irritantes. O ensaio de permeação/retenção cutânea monstrou que o processo de encapsulação/incorporação da BZF-3 promoveu diminuição de sua permeação em todos os tempos de exposição. As quantidades permeadas de AVO e MCO ficaram abaixo do limite de quantificação nos tempos 6 e 12 h, no entanto, no tempo de 24 h foi possível quantificá-los. As quantidades dos filtros solares retidas na pele a partir da formulação contendo os filtros solares encapsulados/incorporados na SBA-15 (F4) foram menores (tempos 6 e 12 h) em comparação à formulação contendo os filtros solares não encapsulados (F3). A investigação da biodistribuição dos filtros solares monstrou que a retenção total na pele, como na derme, foi menor na formulação F4 em comparação à F3. O estudo comparativo entre pele suína e a pele humana monstrou que as quantidades de BZF-3 e AVO permeadas e retidas na pele suína foram superiores do que em relação à humana para ambas as formulações (F4 e FR). Pela técnica de biodistribuição, foi possível determinar que os filtros solares oriundos das formulações F3 e referência (FR) apresentaram maior retenção destes compostos na derme do que em outras camadas da pele. Contudo, observou-se que os filtros encapsulados apresentaram taxa reduzida de retenção na derme. / Organic Filters are chemical compounds widely used in sunscreens formulations with the ability to absorb ultraviolet radiation (UV). Despite the effectiveness of these compounds in UV radiation protection, disadvantages related to their photo instability, potential skin permeation and photo sensibility pose significant challenges for improving these products. The aim of this work was to synthesize mesoporous matrix SBA-15, encapsulation/entrapping of octyl methoxycinnamate (OMC), benzophenone-3 (BZF-3) and avobenzone (AVO) into SBA-15 for application in photoprotective formulations. It was accessed in vitro photoprotection efficacy and in vitro photostability assay of encapsulated/entrapped UV filters combined with cosmetic ingredient and photoprotective stick formulations; evaluation of the ocular irritation potential of photoprotective stick formulations by in vitro method HET-CAM - Hen\'s Egg Test - Chorioallantoic Membrane; evaluation the skin permeation/deposition and biodistribution profile of photoprotective stick formulations. The decrease in the surface area and in mesoporous volume (V) observed in the nitrogen adsorption desorption isotherms of encapsulated/entrapped samples indicated that UV filters were efficiently encapsulated/entrapped into SBA-15. Additionally, SAXS results showed that UV filters did not affected the hexagonal structure of the mesoporous material and that these compounds filled the SBA-15 pores. TG/DTG and elemental analysis were efficient tools to confirm the presence and the quantity of UV filters into SBA-15. DTA and DSC curves of encapsulated/entrapped materials showed that the thermal stability of AVO and BZF-3 were increased. On the other hand, DSC curves of encapsulated/entrapped materials demonstrated that thermal stability of OMC was not increase. The in vitro photoprotective efficacy results demonstrated that the combination of the three sunscreens encapsulated/entrapped into SBA-15 increased 52.0% the SPF values, while the stick formulation containing the UV filters encapsulated/entrapped, the increase was 94.0%. Delivery experiments using porcine skin demonstrated that the encapsulation/entrapping process of UV filters resulted the decreased of BZF-3 permeation and deposition in skin (6 and 12 hours). The cutaneous biodistribution profile of UV filters showed that the deposition of these compounds from encapsulated/entrapped stick formulation (F4) was significantly lower than that from UV filters stick formulations (F3) in the total slices of the skin and dermis. The comparative study between porcine skin and human skin demonstrated that the amounts of BZF-3 and AVO permeated and deposited in porcine skin were higher than in human skin for both formulations (F4 and FR - reference formulation). By the biodistribution technique it was possible to determine that the UV filters from the formulations F3 and FR presented higher retention of these compounds in the dermis than in other layers of the skin. On the other hand, it was observed that the encapsulated UV filters presented low retention rate into dermis.

Filtros orgânicos são amplamente utilizados em formulações fotoprotetoras, com habilidade de absorver radiações ultravioleta (UV). Contudo, parte destes compostos possuem limitações, como: fotoinstabilidade, permeação cutânea e fotossensibilização e entre outros. Este trabalho envolveu a síntese de matriz mesoporosa do tipo SBA-15, encapsulação/incorporação de ρ-metoxicinamato de octila (MCO), benzofenona-3 (BZF-3) e avobenzona (AVO) na SBA-15 para aplicação em formulações fotoprotetoras. Fez-se a determinação da eficácia in vitro dos filtros encapsulados/incorporados combinados a ingrediente cosmético; o preparo de bastão fotoprotetor e determinação eficácia estimada; a avaliação do potencial de irritação ocular dos bastões por HET-CAM - Hen\'s Egg Test - Chorioallantoic Membrane, e a avaliação da permeação/retenção cutânea e perfil de biodistribuição dos filtros. Para a caracterização dos materiais foram empregadas técnicas físico-químicas e analíticas. As medidas de adsorção/dessorção de N2 mostrou que as amostras dos filtros solares encapsulados/incorporados apresentaram diminuição na área superficial e volume de poro (V), indicando que os filtros solares foram encapsulados/incorporados na superfície e nos poros da SBA-15. Os resultados de Espalhamento de raios X a baixo ângulo evidenciaram que os filtros solares não afetaram a estrutura hexagonal da SBA-15. Por TG/DTG e análise elementar foi possível determinar a quantidade de filtros solares na superfície e nos mesoporos da SBA-15. Enquanto, as curvas DSC e DTA revelaram aumento na estabilidade térmica da AVO e BZF-3, quando encapsulados/incorporados. Os resultados da eficácia fotoprotetora in vitro monstraram que a combinação dos três filtros solares encapsulados/incorporados na SBA-15 promoveram aumento de 52% no fator proteção solar (FPS), enquanto que, na formulação fotoprotetora contendo os três filtros encapsulados/incorporados, o aumento foi de 94%. O ensaio de HET-CAM evidenciou que os bastões contendo SBA-15 e os filtros encapsulados/incorporados não foram irritantes. O ensaio de permeação/retenção cutânea monstrou que o processo de encapsulação/incorporação da BZF-3 promoveu diminuição de sua permeação em todos os tempos de exposição. As quantidades permeadas de AVO e MCO ficaram abaixo do limite de quantificação nos tempos 6 e 12 h, no entanto, no tempo de 24 h foi possível quantificá-los. As quantidades dos filtros solares retidas na pele a partir da formulação contendo os filtros solares encapsulados/incorporados na SBA-15 (F4) foram menores (tempos 6 e 12 h) em comparação à formulação contendo os filtros solares não encapsulados (F3). A investigação da biodistribuição dos filtros solares monstrou que a retenção total na pele, como na derme, foi menor na formulação F4 em comparação à F3. O estudo comparativo entre pele suína e a pele humana monstrou que as quantidades de BZF-3 e AVO permeadas e retidas na pele suína foram superiores do que em relação à humana para ambas as formulações (F4 e FR). Pela técnica de biodistribuição, foi possível determinar que os filtros solares oriundos das formulações F3 e referência (FR) apresentaram maior retenção destes compostos na derme do que em outras camadas da pele. Contudo, observou-se que os filtros encapsulados apresentaram taxa reduzida de retenção na derme. / Organic Filters are chemical compounds widely used in sunscreens formulations with the ability to absorb ultraviolet radiation (UV). Despite the effectiveness of these compounds in UV radiation protection, disadvantages related to their photo instability, potential skin permeation and photo sensibility pose significant challenges for improving these products. The aim of this work was to synthesize mesoporous matrix SBA-15, encapsulation/entrapping of octyl methoxycinnamate (OMC), benzophenone-3 (BZF-3) and avobenzone (AVO) into SBA-15 for application in photoprotective formulations. It was accessed in vitro photoprotection efficacy and in vitro photostability assay of encapsulated/entrapped UV filters combined with cosmetic ingredient and photoprotective stick formulations; evaluation of the ocular irritation potential of photoprotective stick formulations by in vitro method HET-CAM - Hen\'s Egg Test - Chorioallantoic Membrane; evaluation the skin permeation/deposition and biodistribution profile of photoprotective stick formulations. The decrease in the surface area and in mesoporous volume (V) observed in the nitrogen adsorption desorption isotherms of encapsulated/entrapped samples indicated that UV filters were efficiently encapsulated/entrapped into SBA-15. Additionally, SAXS results showed that UV filters did not affected the hexagonal structure of the mesoporous material and that these compounds filled the SBA-15 pores. TG/DTG and elemental analysis were efficient tools to confirm the presence and the quantity of UV filters into SBA-15. DTA and DSC curves of encapsulated/entrapped materials showed that the thermal stability of AVO and BZF-3 were increased. On the other hand, DSC curves of encapsulated/entrapped materials demonstrated that thermal stability of OMC was not increase. The in vitro photoprotective efficacy results demonstrated that the combination of the three sunscreens encapsulated/entrapped into SBA-15 increased 52.0% the SPF values, while the stick formulation containing the UV filters encapsulated/entrapped, the increase was 94.0%. Delivery experiments using porcine skin demonstrated that the encapsulation/entrapping process of UV filters resulted the decreased of BZF-3 permeation and deposition in skin (6 and 12 hours). The cutaneous biodistribution profile of UV filters showed that the deposition of these compounds from encapsulated/entrapped stick formulation (F4) was significantly lower than that from UV filters stick formulations (F3) in the total slices of the skin and dermis. The comparative study between porcine skin and human skin demonstrated that the amounts of BZF-3 and AVO permeated and deposited in porcine skin were higher than in human skin for both formulations (F4 and FR - reference formulation). By the biodistribution technique it was possible to determine that the UV filters from the formulations F3 and FR presented higher retention of these compounds in the dermis than in other layers of the skin. On the other hand, it was observed that the encapsulated UV filters presented low retention rate into dermis.

The Intergovernmental Panel on Climate Change (IPCC) estimates that buildings account for 40% of the global energy use. The IPCC believes substantial improvements to building efficiency can be implemented easily by improving building enclosures through increased levels of insulation, optimizing glazing areas and minimizing infiltration of outside air.<br><br> Building enclosure design encompasses a wide range of parameters but the transport of heat, air and moisture through the enclosure is of primary importance. In predominantly cold Canadian climates, adequate thermal insulation, effective air barriers, and proper moisture control are crucial for energy savings and durability of the structure.<br><br> For decades, standard construction practice in Canada dictated a polyethylene sheet behind the interior drywall layer to serve as a vapour barrier for assemblies with traditional fibre-based cavity insulation. If the polyethylene sheet was sealed carefully enough it had the added benefit of reducing air leakage. Unfortunately, vapour barriers place the emphasis on the wrong moisture transport mechanism; air leakage can have 10 times or greater the wetting potential than vapour diffusion. Regardless, code enforcement personnel continued (and continue in some areas) to require vapour barriers in all climates, all assemblies, and all occupancies. To do so, they overrule the provision in Part 5 of The National Building Code of Canada that states vapour barriers are not required if it can be shown that the uncontrolled vapour diffusion will not affect the operation of the building and systems, or the health and safety of the occupants.<br><br> Foam plastic insulations perform better than fibre-based insulation in terms of the combined resistance to transmission of heat, air and vapour. This research investigated several types of open cell and closed cell spray polyurethane foam insulation in a variety of assembly configurations both in lab tests and hygrothermal simulations. The simulations were extrapolated to seven Canadian climate categories and three levels of interior relative humidity. The goal was to determine which spray polyurethane foam applications required the addition of a dedicated vapour barrier layer beyond what the foam itself could provide.<br><br> The moisture content of the oriented strand board sheathing layer (OSB) in the tested and modelled assemblies was used as the performance evaluation point because during wintertime vapour drives, the wood sheathing is the most likely condensing surface. Prolonged high moisture content (greater than 20%) in wood and wood products in wall assemblies leads to mould growth and decay. By this measure, if the wood sheathing moisture contents stay within the safe range (less than 19%) a vapour barrier is not necessary. The results are presented in Table 7-4.<br><br> The performance of assemblies containing closed cell spray foam was excellent for all climates and humidity levels. Their performance was equivalent to traditional wall assemblies incorporating a polyethylene sheet vapour barrier. The performance of assemblies with open cell spray foam was equivalent to traditional wall assemblies containing no vapour barrier. Open cell spray foam and fibreglass batt both require additional vapour control layers with all but the mildest Canadian climates with the lowest interior humidities. However, in those mild climates with low interior humidities, the only vapour control layer required was a medium permeance latex paint with primer.<br><br>

The Intergovernmental Panel on Climate Change (IPCC) estimates that buildings account for 40% of the global energy use. The IPCC believes substantial improvements to building efficiency can be implemented easily by improving building enclosures through increased levels of insulation, optimizing glazing areas and minimizing infiltration of outside air.<br><br> Building enclosure design encompasses a wide range of parameters but the transport of heat, air and moisture through the enclosure is of primary importance. In predominantly cold Canadian climates, adequate thermal insulation, effective air barriers, and proper moisture control are crucial for energy savings and durability of the structure.<br><br> For decades, standard construction practice in Canada dictated a polyethylene sheet behind the interior drywall layer to serve as a vapour barrier for assemblies with traditional fibre-based cavity insulation. If the polyethylene sheet was sealed carefully enough it had the added benefit of reducing air leakage. Unfortunately, vapour barriers place the emphasis on the wrong moisture transport mechanism; air leakage can have 10 times or greater the wetting potential than vapour diffusion. Regardless, code enforcement personnel continued (and continue in some areas) to require vapour barriers in all climates, all assemblies, and all occupancies. To do so, they overrule the provision in Part 5 of The National Building Code of Canada that states vapour barriers are not required if it can be shown that the uncontrolled vapour diffusion will not affect the operation of the building and systems, or the health and safety of the occupants.<br><br> Foam plastic insulations perform better than fibre-based insulation in terms of the combined resistance to transmission of heat, air and vapour. This research investigated several types of open cell and closed cell spray polyurethane foam insulation in a variety of assembly configurations both in lab tests and hygrothermal simulations. The simulations were extrapolated to seven Canadian climate categories and three levels of interior relative humidity. The goal was to determine which spray polyurethane foam applications required the addition of a dedicated vapour barrier layer beyond what the foam itself could provide.<br><br> The moisture content of the oriented strand board sheathing layer (OSB) in the tested and modelled assemblies was used as the performance evaluation point because during wintertime vapour drives, the wood sheathing is the most likely condensing surface. Prolonged high moisture content (greater than 20%) in wood and wood products in wall assemblies leads to mould growth and decay. By this measure, if the wood sheathing moisture contents stay within the safe range (less than 19%) a vapour barrier is not necessary. The results are presented in Table 7-4.<br><br> The performance of assemblies containing closed cell spray foam was excellent for all climates and humidity levels. Their performance was equivalent to traditional wall assemblies incorporating a polyethylene sheet vapour barrier. The performance of assemblies with open cell spray foam was equivalent to traditional wall assemblies containing no vapour barrier. Open cell spray foam and fibreglass batt both require additional vapour control layers with all but the mildest Canadian climates with the lowest interior humidities. However, in those mild climates with low interior humidities, the only vapour control layer required was a medium permeance latex paint with primer.<br><br>

No description available.

abstract: The performance of the Alpha Sprayed Polyurethane Foam (SPF) roofing system is perceived as not an economical option when compared to a 20-year modified bitumen roofing system. Today, the majority of roofs are being replaced, rather than newly installed. The coating manufacturer, Neogard, implemented the Alpha roofing program to identify the best contractors in the industry and to measure their roof performance. The Alpha roof system has shown consistent high performance on over 230 million square feet of surveyed roof. The author proposes to identify if the Alpha roof system is renewable, has proven performance that competes with the traditional modified roofing system, and is a more economical option by evaluating an Alpha roof system installation and the performance of a 29-year-old Alpha roof system. The Dallas Independent School District utilized the Alpha program for William Lipscomb Elementary School in 2016. Dallas Fort Worth Urethane installed the Alpha SPF roof system with high customer satisfaction ratings. This roofing installation showed the value of the Alpha roof system by saving over 20% on costs for the installation and will save approximately 69% of costs on the recoating of the roof in 20 years. The Casa View Elementary School roof system was installed with a Neogard Permathane roof system in 1987. This roof was hail tested with ten drops from 17 feet 9 inches of 1-3/4-inch steel ball (9 out of 10 passed) and four drops from 17 feet 9 inches with a 3-inch diameter steel ball (2 out of 4 passed). The analysis of the passing and failing core samples show that the thickness of the top and base Alpha SPF coating is one of the major differences in a roof passing or failing the FM-SH hail test. Over the 40-year service life, the main difference of purchasing a 61,000 square feet Alpha SPF roof versus modified bitumen roof are savings of approximately $1,067,500. Past hail tests on Alpha SPF roof systems show its cost effectiveness with high customer satisfaction (9.8 out of 10), an over 40-year service life after a $6.00/SF recoat and savings of over $1M for DISD. / Dissertation/Thesis / Masters Thesis Construction 2017