The sun provides us daily with large quantities of energy in the form of light. With the world’s increasing demand of electrical energy the prospect of converting this solar light into electricity is highly tempting. In the strive towards mass-production and low cost solar cells, new types of solar cells are being developed, e.g. solar cells completely based on organic molecules and polymers. These materials offer a promising potential of low cost and large scale manufacturing and have the additional advantage that they can be produced on flexible and light weight substrate which opens for new and innovating application areas, e.g. integration with paper or textiles, or as building materials. In polymer solar cells a combination of two materials are used, an electron donor and an electron acceptor. The three dimensional distribution of the donor and acceptor in the active layer of the device, i.e. the morphology, is known to have larger influence of the solar cell performance. For the optimal morphology there is a trade-off between sometimes conflicting criteria for the various steps of the energy conversion process. The dissociation of photogenerated excitons takes place at an interface between the donor and acceptor materials. Therefore an efficient generation of charges requires a large interface between the two components. However, for charge transport and collection at the electrodes, continuous pathways for the charges to the electrodes are required. In this thesis, results from morphology studies by atomic force microscopy (AFM) and dynamic secondary ion mass spectrometry (SIMS) of spin-coated blend and bilayer thin films of polyfluorene co-polymers, especially poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4´,7´-di-2-thienyl-2´,1´,3´-benzothiadiazole)] APFO-3, and the fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are presented. It is shown that by varying the blend ratio, the spin.-coating solvent, and/or the substrate, different morphologies can be obtained, e.g. diffuse bilayer structures, spontaneously formed multilayer structures and homogeneous blends. The connection between these different morphologies and the performance of solar cells is also analysed. The results indicate that nano-scale engineering of the morphology in the active layer may be an important factor in the optimization of the performance of polymer solar cells.

This work is a thermodynamic and kinetic study of the Fe-Cr-Ni system as the core of stainless steels. The Fe-Cr, Fe-Ni and Cr-Ni systems were studied intensively using both computational and experimental techniques, including CALPHAD (CALculation of PHAse Diagrams), phase field simulation, ab initio modeling, calorimetry, and atom probe tomography. The purpose of this thesis is to reveal the complexity of the phase transformations in the Fe-Cr-Ni system via the integrated techniques. Due to the importance of the binary Fe-Cr system, it was fully reassessed using the CALPHAD technique by incorporating an updated description of the lattice stability for Fe down to zero kelvin. The improved thermodynamic description was later adopted in a phase field simulation for studying the spinodal decomposition in a series of Fe-Cr binary alloys. Using atom probe tomography and phase field simulation, a new approach to analyze the composition amplitude of the spinodal decomposition was proposed by constructing an amplitude density spectrum. The magnetic phase diagram of the Fe-Ni system was reconstructed according to the results from both ab initio calculations and reported experiments. Based on the Inden-Hillert-Jarl magnetic model, the thermodynamic reassessment of the Fe-Ni system demonstrated the importance of magnetism in thermodynamic and kinetic investigations. Following this, the current magnetic model adopted in the CALPHAD community was further improved. Case studies were performed showing the advantages of the improved magnetic model. Additionally, the phase equilibria of the Fe-Cr-Ni ternary were discussed briefly showing the need of thermodynamic and kinetic studies at low temperatures. The “low temperature CALPHAD” concept was proposed and elucidated in this work showing the importance of low temperature thermodynamics and kinetics for designing the new generation of stainless steels. / <p>QC 20120612</p> / Hero-m

Stainless steels are very important engineering materials in a variety of applications such as in the food industry and nuclear power plants due to their combination of good mechanical properties and high corrosion resistance. However, ferrite-containing stainless steels are sensitive to the so-called ‘475°C embrittlement’, which is induced by phase separation of the ferrite phase, where it decomposes into Fe-rich ferrite (α) and Cr-rich ferrite (α'). The phase separation is accompanied with a severe loss of toughness. Therefore, the upper service temperature of ferrite-containing stainless steels in industrial applications has been limited to around 250°. In the present work, Fe-Cr based steels were mainly investigated by atom probe tomography. A new method based on the radial distribution function (RDF) was proposed to quantitatively evaluate both the wavelength and amplitude of phase separation in Fe-Cr alloys from the atom probe tomography data. Moreover, a simplified equation was derived to calculate the amplitude of phase separation. The wavelength and amplitude was compared with evaluations using the auto-correlation function (ACF) and Langer-Bar-on-Miller (LBM) method, respectively. The results show that the commonly used LBM method underestimates the amplitude of phase separation and the wavelengths obtained by RDF shows a good exponential relation with aging time which is expected from the theory. The RDF is also an effective method in detecting the phenomena of clustering and elemental partitioning. Furthermore, atom probe tomography and the developed quantitative analysis method have been applied to investigate the influence of different factors on the phase separation in Fe-Cr based alloys by the help of mainly mechanical property tests and atom probe tomography analysis. The study shows that: (1) the external tensile stress during aging enhances the phase separation in ferrite. (2) Phase separation in weld bead metals decomposes more rapidly than both the heat-affected-zone metals and the base metals mainly due to the high density of dislocations in the welding bead metals which could facilitate the diffusion. (3) The results show that Ni and Mn can enhance the phase separation comparing to the binary Fe-Cr alloy whereas Cu forms clusters during aging. (4) Initial clustering of Cr atoms was found after homogenization. Two factors, namely, clustering of Cr above the miscibility gap and clustering during quenching was suggested as the two responsible mechanisms. (5) The homogenization temperatures significantly influence the evolution of phase separation in Fe-46.5at.%Cr. / <p>QC 20140910</p> / Spinodal Project

This thesis explores nanostructuring in TiSiCN, ZrAlN, and TiAlN thin films deposited by cathodic arc evaporation onto cemented carbide substrates, with intended applications for cutting tools. The three systems were found to exhibit age hardening upon annealing, by different mechanisms, into the superhard regime (≥30 GPa), as determined by a combination of electron microscopy, X-ray diffraction, atom probe tomography, erda, and nanoindentation tech- niques. TiSiCN forms nanocomposite films during growth by virtue of Si segregation to the surface of TiCN nanocrystallites while simultaneously pro- moting renucleation. Thus, the common columnar microstructure of TiCN and low-Si-content (≤5 at. %) TiSiN-films is replaced by a “feather-like” nanos- tructure in high-Si-content (≥10 at. %) TiSiCN films. The presence of C promotes the formation of this structure, and results in an accelerated age hardening beginning at temperatures as low as 700 °C. The thermal stability of the TiSiCN films is, however, decreased compared to the TiSiN system by the loss of Si and interdiffusion of substrate species; C was found to ex- acerbate these processes, which became active at 900 °C. The ZrAlN system forms a two-phase nanostructure during growth consisting of cubic ZrAlN and wurtzite ZrAlN. Upon annealing to 1100 °C, the c-Zr(Al)N portion of the films recovers and semicoherent brick-like w-(Zr)AlN structures are formed. Age hardening by 36 % was obtained before overageing sets in at 1200 °C. As-deposited and annealed solid solution Ti0.33Al0.67N thin films were characterized for the first time by atom probe tomography. The as-deposited film was found to be at the very initial stage of spinodal decomposition, which continued during annealing of the film at 900 °C for 2 h. N preferentially segregates to Al-rich domains in the annealed sample, causing a compositional variation between Ti-rich and Al-rich domains, to maintain the stoichiometry for the developing AlN phase. That effect also compensates for some of the coherency strain formed between cubic domains of TiN and AlN. Finally, a possible Kirkendall effect caused by an imbalance in the metal interdiffusion during the spinodal decomposition was discovered.

No description available.

Spinodal decomposition is a phenomenon which hinders the usage of ferrite containing steels under certain conditions. With a better understanding and knowledge of spinodal decomposition new ferritic and duplex stainless steels could be designed. The project is divided into two parts, an experimental part and a theoretical part. The aim of the theoretical part was to compare simulated values of the amplitude and wavelength of spinodal decomposition, obtained from solving the Cahn-Hilliard equation with other experimental values. The experimental part is performed as to determine the chemical diffusion coefficient and the mobility of Fe and Cr in the binary Fe-Cr system for lower temperatures using the Boltzmann-Matano method from chemical profiles of different samples. Another purpose with the project is to determine if the methods and the approach which are taken is viable and useful for calculating diffusion coefficients and if it can be used in studies to come. The simulations were in good agreement with other data at higher time intervals, but deviates at lower times. The calculated interdiffusion coefficients were in all cases lower than the expected values and as such the conclusion that is drawn is that the methods which are used could need further development. / Spinodalt sönderfall är ett fenomen som hindrar användningen av stål som innehåller ferrit under vissa förutsättningar. Med en större förståelse och mer kunskap om spinodalt sönderfall så kan nya ferritiska och duplexa rostfria stål utformas. Projektet är uppdelat i två delar, en experimentell del och en teoretisk del. Syftet med den teoretiska delen var att jämföra simulerade värden av amplituden och våglängden för spinodalt sönderfall, vilka erhölls från att lösa Cahn-Hilliard ekvationen med andra experimentella värden. Den experimentella delen utförs för att bestämma kemiska diffusionskoefficienter för Fe och Cr i det binära Fe-Cr system för lägre temperaturer med hjälp av Boltzmann-Matano metod från kemiska profiler av olika prover. Ett annat syfte med projektet är att ta reda på om de metoder och tillvägagångssätt som tas är livskraftiga och användbara för beräkning av diffusionskoefficienter och om den kan användas i studier framöver. Simuleringarna var i god överensstämmelse med annan experimentel data vid högre tidsintervall, men avviker vid lägre tider. De beräknade Interdiffusion koefficienterna var i samtliga fall lägre än de förväntade värdena och som sådan, dras slutsatsen att de metoder som används kan förbättras.

Surface energy plays a major role in many phenomena that are important in technological and industrial processes, for example in wetting, grain growth and sintering. In this thesis, such surface-energy driven processes are studied by means of the phase-field method. The phase-field method is often used to model mesoscale microstructural evolution in materials. It is a diffuse interface method, i.e., it considers the surface or phase boundary between two bulk phases to have a non-zero width with a gradual variation in physical properties such as energy density, composition and crystalline structure. Neck formation and coarsening are two important diffusion-controlled features in solid-state sintering and are studied using our multiphase phase-field method. Inclusion of Navier-Stokes equation with surface-tension forces and convective phase-field equations into the model, enables simulation of reactive wetting and liquid-phase sintering. Analysis of a spreading liquid on a surface is investigated and is shown to follow the dynamics of a known hydrodynamic theory. Analysis of important capillary phenomena with wetting and motion of two particles connected by a liquid bridge are studied in view of important parameters such as contact angles and volume ratios between the liquid and solid particles. The interaction between solute atoms and migrating grain boundaries affects the rate of recrystallization and grain growth. The phenomena is studied using a phase-field method with a concentration dependent double-well potential over the phase boundary. We will show that with a simple phase-field model it is possible to model the dynamics of grain-boundary segregation to a stationary boundary as well as solute drag on a moving boundary. Another important issue in phase-field modeling has been to develop an effective coupling of the phase-field and CALPHAD methods. Such coulping makes use of CALPHAD's thermodynamic information with Gibbs energy function in the phase-field method. With the appropriate thermodynamic and kinetic information from CALPHAD databases, the phase-field method can predict mictrostructural evolution in multicomponent multiphase alloys. A phase-field model coupled with a TQ-interface available from Thermo-Calc is developed to study spinodal decomposition in FeCr, FeCrNi and TiC-ZrC alloys. / QC 20100622

Le mélanome est un cancer dont la mortalité augmente rapidement avec le temps. Afin d'assurer une détection précoce, des campagnes de sensibilisation ont été menées donnant des critères morphologiques pour le distinguer des grains de beauté. Mais, l'origine des différences d'aspects entre lésions bénignes et malignes reste inconnue. L'objectif est ici de relier les effets des modifications génétiques à l'aspect des tumeurs, en utilisant des outils venus de la physique macroscopique. Les mélanomes ont l'avantage d'être facilement observables et fins, ce qui en font un système idéal. Ce travail commence par rappeler les aspects physiologiques des cancers de la peau. On explique le fonctionnement de la peau saine, puis nous décrivons les différents types de lésions cutanées, et enfin nous donnons un bref aperçu des différents chemins génétiques connus menant au mélanome. Ensuite, nous faisons un rappel des différents modèles mathématiques du cancer. Nous nous attardons sur l'utilisation de la théorie des mélanges comme base théorique de mise en équation des tumeurs. Nous l'appliquons ensuite dans un modèle simplifié à deux phases en deux dimensions. Puis, nous analysons ces équations. Une étude des composantes spatiales montre la possibilité d'un processus de séparation de phases : la décomposition spinodale. L'étude temporelle permet de montrer que ces équations contiennent les ingrédients nécessaires à décrire plusieurs types de mélanomes observés in vivo. Nous terminons par l'étude des effets de la troisième dimension jusqu'alors mis de côté dans le modèle. Nous mettons en équation des mélanomes évoluant sur un épiderme ondulé, au niveau des mains et des pieds. / Melanoma is a cancer whose mortality grows rapidly with time. In order to insure an early diagnosis, advertising campaigns have emphasized the importance of morphological criteria in order to distinguish moles from melanoma. But, the origins of those criteria are still poorly understood. Our goal is to understand the link between genetic modifications and melanoma patterns using physical tools. As melanoma is easily observable and thin, this makes it an ideal system. This work begins by recalling the physiological aspect of skin cancer. Healthy skin is thoroughly described, then cancerous lesions are depictesd, and melanoma genetic pathways are briefly discussed. Then, continuous mathematical models of cancer are reviewed. We show how mixture theory is used to put cancer into equations. Then, this framework is simplified in a two phases 2D model.Those equations are analysed. The spatial study shows the possibility of a phase separation process: the spinodal decomposition. And, the time study shows thet this model contains the ingredients necessary to describe several melanoma types seen in vivo.Focussing finally on the third dimension. Melanoma evolving on a wavy epidermis (hands and feet skin) are studied. We explain how melanoma patterns should follow the skin ridges (fingerprints).

Fe-Cr based steels, i.e. stainless steels, possessing a combination of excellent corrosion resistance and good mechanical properties, have indispensable applications ranging from low-end cooking utensils, to sophisticated components for nuclear power plants. However, the bcc/bct phase containing stainless steels which have a miscibility gap (MG) suffer from the so-called “475 oC embrittlement” leading to hardness increase and toughness deterioration. It occurs due to demixing of Fe and Cr leading to the formation of Fe-rich (α) and Cr-rich (α′) regions in bcc/bct phases. The demixing is referred to as phase separation (PS). The goal of this work was to study PS in ferrite containing stainless steels mainly by small-angle neutron scattering (SANS). Firstly, the application of different experimental techniques for the study of phase separation in Fe-Cr based steels was reviewed and supplemented by new measurements. SANS was shown to be very sensitive to the nanostructure change caused by PS and capable of characterizing the early stages of PS in Fe-Cr alloys. However, atom probe tomography and transmission electron microscopy are complementary to SANS. Therefore, in order to have a more complete view of the microstructure, the combination of these techniques should be pursued. Secondly, the factors affecting the initial microstructure prior to aging treatment and the effect of the resulted initial microstructure on PS were systematically investigated using binary Fe-Cr model alloys. The critical temperature of the MG was determined to be located between 560 and 580 oC in binary Fe-Cr. The results indicate that the solution treatment temperature above the MG and the cooling rate after solution treatment have significant effects on the initial microstructure and thus on PS during subsequent aging. The mechanisms responsible for the changed aging behavior are Cr clustering, quenched-in vacancy and decomposition during cooling. Therefore, computational simulations should take into account these factors and the initial microstructure to make predictions that are more accurate. Thirdly, the study was extended to PS in commercial duplex stainless steels (DSSs) which are of practical importance in various industries, e.g., nuclear power. It is found that alloying elements have an important effect on PS in DSSs. The grade 2507 (25 %Cr, 7 %Ni) experiences stronger PS than grade 2205 (22 %Cr, 5 % Ni) for the same heat treatment. Moreover, the fracture mechanisms as well as the mechanical properties depend on the extent of PS.  Finally, the fundamental aspects regarding the neutron scattering behavior for Fe-Cr alloys were examined. The results show that the nuclear and magnetic scattering of neutrons depend on the evolution of the nanoscale compositional fluctuation in Fe-Cr alloys. The ratio of the magnitude of nuclear scattering versus magnetic scattering varies with the extent of PS. / Stål baserade på Fe-Cr systemet, det vill säga rostfria stål, som har en kombination av utmärkta korrosionsegenskaper och bra mekaniska egenskaper, har många tillämpningar; allt från köksredskap, till sofistikerade komponenter för kärnkraftverk. Rostfria stål som innehåller Bcc / bct-fasen och som således har en blandningslucka, är känsliga för den så kallade "475 °C försprödningen" som leder till en hårdhetsökning men kraftigt försämrad slagseghet. Detta uppstår på grund av en uppdelning av Fe och Cr som leder till bildandet av Fe-rika (a) och Cr-rika (a’) regioner i bcc / bct-fasen. Denna uppdelning brukar kallas fasseparation. Målet med detta arbete var att studera fasseparationen i ferrit-innehållande rostfria stål främst genom lågvinkel-spridning av neutroner (SANS). Till att börja med studerades och jämfördes olika experimentella tekniker för undersökning av fasseparation i Fe-Cr-baserade stål med nya SANS- mätningar. SANS visade sig vara mycket känslig för förändringar på nano-skala orsakad av fasseparation och tekniken visade sig även kapabel att karakterisera de tidiga stadierna av fasseparation i Fe-Cr-legeringar. För att få en mer fullständig bild av mikrostrukturen efter fasseparation, bör emellertid en kombination av SANS och komplementära tekniker, såsom atomsond och transmissions-elektronmikroskopi, användas. Vidare undersöktes de faktorer som påverkar den ursprungliga mikrostrukturen före åldringsbehandling, och effekten av den initiala mikrostrukturen på fasseparation studerades systematiskt med användning av binära modell-legeringar av Fe-Cr. Den kritiska temperaturen för blandningsluckan i Fe-Cr bestämdes vara belägen mellan 560 och 580 °C. Resultaten indikerar att temperaturen för upplösningsbehandling ovanför blandningsluckan och kylhastigheten har en signifikant inverkan på den initiala mikrostrukturen och därmed på fasseparationen under efterföljande åldring. Mekanismerna som är ansvariga för det förändrade åldringsbeteendet är: Cr-klustring, insläckta vakanser och fasseparation under kylning. Simuleringar av fasseparationen bör därför ta hänsyn till dessa faktorer och den ursprungliga mikrostrukturen för att göra mer exakta förutsägelser av hur mikrostrukturen utvecklar sig med åldringstiden. Fasseparationen i kommersiella duplexa rostfria stål (DSS), som är av stor praktisk betydelse i olika branscher, t ex kärnkraft, studerades också med SANS. Det visade sig att mängden av olika legeringselement har en viktig effekt på graden av fasseparation i DSS. Legeringen 2507 uppvisade en tydligare fasseparation jämfört med legering 2205 för samma värmebehandling. Brottmekanismerna såväl som de mekaniska egenskaperna visade sig bero på omfattningen av fasseparationen. Slutligen undersöktes de grundläggande aspekterna hos neutronspridnings-beteendet för binära Fe-Cr-legeringar. Resultaten visade att kärn- och magnetisk spridning av neutroner beror på utvecklingen av sammansättningsfluktuationerna på en nanoskala i Fe-Cr-legeringar. Förhållandet mellan magnetisk- och kärnspridning varierar med omfattningen av fasseparationen. / <p>QC 20171117</p>

TiAlN and TiAlN-based coatings that are used of relevance as protection of cutting tool inserts used in metal machining have been studied. All coatings were deposited by reactive cathodic arc evaporation using industrial scale deposition systems. The metal content of the coatings was varied by using different combinations of compound cathodes. The as-deposited coatings were temperature annealed at ambient pressure and in some cases also at high pressure. The resulting microstructure was first evaluated through a combination of x-ray diffraction and transmission electron microscopy. In addition, mechanical properties such as hardness by nanoindentation were also reported. TiAlN coatings with two different compositions were deposited on polycrystalline boron nitride substrates and then high pressure high temperature treated in a BELT press at constant 5.35 GPa and at 1050 and 1300 °C for different times. For high pressure high temperature treated TiAlN it has been shown that the decomposition is slower at higher pressure compared to ambeint pressure and that no chemical interaction takes place between TiAlN and polycrystalline cubic boron nitride during the experiments. It is concluded that this film has the potential to protect a polycrystalline cubic boron nitride substrate during metal machining due to a high chemical integrity. TiZrAlN coatings with different predicted driving forces for spinodal decomposition were furthermore annealed at different temperatures. For this material system it has been shown that for Zr-poor compositions the tendency for phase separation between ZrN and AlN is strong at elevated temperatures and that after spinodal decomposition stable TiZrN is formed.