Spelling suggestions: "subject:"6eries cybrid electric ehicle"" "subject:"6eries cybrid electric aehicle""
1 |
Design, simulation, and construction of a series hybrid electric vehicleNorthcott, Daniel Ross 27 September 2007 (has links)
This thesis evaluates a series hybrid electric drivetrain design for use in parking patrol vehicles. Due to the particular attributes of this application, it is proposed that the design would improve the energy efficiency of such a vehicle. The scheme is evaluated in depth through the use of electromagnetic transient simulation tools, which are used to create a highly accurate model of the vehicle. A prototype vehicle of the same design is built, and used to verify and improve the accuracy of the simulation model. The simulation model is then used to predict the energy efficiency of the series hybrid design for parking patrol. This simulation based design strategy is proposed as a method for more rapid and cost effective design of hybrid electric vehicles. / October 2007
|
2 |
Design, simulation, and construction of a series hybrid electric vehicleNorthcott, Daniel Ross 27 September 2007 (has links)
This thesis evaluates a series hybrid electric drivetrain design for use in parking patrol vehicles. Due to the particular attributes of this application, it is proposed that the design would improve the energy efficiency of such a vehicle. The scheme is evaluated in depth through the use of electromagnetic transient simulation tools, which are used to create a highly accurate model of the vehicle. A prototype vehicle of the same design is built, and used to verify and improve the accuracy of the simulation model. The simulation model is then used to predict the energy efficiency of the series hybrid design for parking patrol. This simulation based design strategy is proposed as a method for more rapid and cost effective design of hybrid electric vehicles.
|
3 |
Design, simulation, and construction of a series hybrid electric vehicleNorthcott, Daniel Ross 27 September 2007 (has links)
This thesis evaluates a series hybrid electric drivetrain design for use in parking patrol vehicles. Due to the particular attributes of this application, it is proposed that the design would improve the energy efficiency of such a vehicle. The scheme is evaluated in depth through the use of electromagnetic transient simulation tools, which are used to create a highly accurate model of the vehicle. A prototype vehicle of the same design is built, and used to verify and improve the accuracy of the simulation model. The simulation model is then used to predict the energy efficiency of the series hybrid design for parking patrol. This simulation based design strategy is proposed as a method for more rapid and cost effective design of hybrid electric vehicles.
|
4 |
Range Extender Development for Electric Vehicle Using Engine Generator SetAmbaripeta, Hari Prasad 18 March 2015 (has links)
No description available.
|
5 |
Estratégias de gerenciamento de potência em ônibus de transporte urbano elétrico híbrido série / Energy management strategy in series hybrid electric urban busLopes, Juliana 16 July 2008 (has links)
Unidades propulsoras híbrido elétricas são uma alternativa em potencial para a redução do consumo de combustível e emissões de poluentes, quando empregadas em veículos de transporte público. A configuração híbrido elétrica de interesse é a série, na qual as fontes de potência, para o motor elétrico de tração, são compostas por um banco de baterias e uma unidade formada pela junção entre um motor à combustão interna e um gerador. Na presente Dissertação foi realizada a modelagem de um veículo elétrico híbrido série na qual diferentes estratégias de gerenciamento de potência foram investigadas. Dentre as estratégias de interesse, duas são fundamentadas em regras e a terceira em sistemas fuzzy. Resultados obtidos comprovaram que a fundamentada em sistemas fuzzy possibilita maior economia de combustível, permitindo que o motor à combustão interna forneça menos potência, face o emprego das baseadas em regras. Dessa forma, a utilização de sistemas fuzzy no gerenciamento de potência do veículo, permite o emprego de um motor à combustão menos potente, de menor custo, sem o comprometimento do desempenho do veículo. As simulações do presente modelo de veículo híbrido foram realizadas no ambiente Matlab/Simulink® 7.3.0. / Hybrid electric propulsion units are a potential alternative to the reduction of fuel consumption and pollutant emissions, when used in public transport vehicles. The electric hybrid configuration of interest is the series, in which the energy supplies to the traction electric motor are composed of batteries and a unit represented by the connection of an internal combustion engine and a generator. This Dissertation presents the modeling of a series hybrid electric vehicle in which different energy management strategies were investigated. Among the strategies of interest, two are based on rules and one on fuzzy systems. The obtained results proved that the strategy based on fuzzy systems improved the fuel economy, allowing the internal combustion engine to supply less power than the use of the strategies based on rules. Therefore, the use of fuzzy systems in the energy management of the vehicle allows for the adoption of a less potent and cheaper internal combustion engine, without compromising the vehicles performance. The simulations of the present model of the hybrid electric vehicle were performed in the Matlab/Simulink® 7.3.0 environment.
|
6 |
Analysis and control of a hybrid vehicle powered by free-piston energy converterHansson, Jörgen January 2006 (has links)
<p>The introduction of hybrid powertrains has made it possible to utilise unconventional engines as primary power units in vehicles. The free-piston energy converter (FPEC) is such an engine. It is a combination of a free-piston combustion engine and a linear electrical machine. The main features of this configuration are high efficiency and a rapid transient response.</p><p>In this thesis the free-piston energy converter as part of a hybrid powertrain is studied. One issue of the FPEC is the generation of pulsating power due to the reciprocating motion of the translator. These pulsations affect the components in the powertrain. However, it is shown that these pulsations can be handled by a normal sized DC-link capacitor bank. In addition, two approaches to reduce these pulsations are suggested: the first approach is using generator force control and the second approach is based on phase-shifted operation of two FPEC units. The latter approach results in higher frequency and lower amplitude of the pulsations, which reduce the capacitor losses.</p><p>The FPEC start-up requirements are analysed and by choosing the correct amplitude of the generator force during start-up the energy consumption can be minimised.</p><p>The performance gain of utilising the FPEC in a medium sized series hybrid electric vehicle (SHEV) is also studied. An FPEC model suitable for vehicle simulation is developed and a series hybrid powertrain, with the same performance as the Toyota Prius, is dimensioned and modelled.</p><p>Optimisation is utilised to find a lower limit on the SHEV's fuel consumption for a given drivecycle. In addition, three power management control strategies for the FPEC system are investigated: two load-following strategies using one and two FPEC units respectively and one strategy based on the ideas of an equivalent consumption minimisation (ECM) proposed earlier in the literature.</p><p>The results show a significant decrease in fuel consumption, compared to a diesel-generator powered SHEV, just by replacing the diesel-generator with an FPEC. This result is improved even more by using two FPEC units to generate the propulsion power, as this increases the efficiency at low loads. The ECM control strategy does not reduce the fuel consumption compared to the load-following strategies but gives a better utilisation of the available power sources.</p>
|
7 |
Estratégias de gerenciamento de potência em ônibus de transporte urbano elétrico híbrido série / Energy management strategy in series hybrid electric urban busJuliana Lopes 16 July 2008 (has links)
Unidades propulsoras híbrido elétricas são uma alternativa em potencial para a redução do consumo de combustível e emissões de poluentes, quando empregadas em veículos de transporte público. A configuração híbrido elétrica de interesse é a série, na qual as fontes de potência, para o motor elétrico de tração, são compostas por um banco de baterias e uma unidade formada pela junção entre um motor à combustão interna e um gerador. Na presente Dissertação foi realizada a modelagem de um veículo elétrico híbrido série na qual diferentes estratégias de gerenciamento de potência foram investigadas. Dentre as estratégias de interesse, duas são fundamentadas em regras e a terceira em sistemas fuzzy. Resultados obtidos comprovaram que a fundamentada em sistemas fuzzy possibilita maior economia de combustível, permitindo que o motor à combustão interna forneça menos potência, face o emprego das baseadas em regras. Dessa forma, a utilização de sistemas fuzzy no gerenciamento de potência do veículo, permite o emprego de um motor à combustão menos potente, de menor custo, sem o comprometimento do desempenho do veículo. As simulações do presente modelo de veículo híbrido foram realizadas no ambiente Matlab/Simulink® 7.3.0. / Hybrid electric propulsion units are a potential alternative to the reduction of fuel consumption and pollutant emissions, when used in public transport vehicles. The electric hybrid configuration of interest is the series, in which the energy supplies to the traction electric motor are composed of batteries and a unit represented by the connection of an internal combustion engine and a generator. This Dissertation presents the modeling of a series hybrid electric vehicle in which different energy management strategies were investigated. Among the strategies of interest, two are based on rules and one on fuzzy systems. The obtained results proved that the strategy based on fuzzy systems improved the fuel economy, allowing the internal combustion engine to supply less power than the use of the strategies based on rules. Therefore, the use of fuzzy systems in the energy management of the vehicle allows for the adoption of a less potent and cheaper internal combustion engine, without compromising the vehicles performance. The simulations of the present model of the hybrid electric vehicle were performed in the Matlab/Simulink® 7.3.0 environment.
|
8 |
Analysis and diagnosis of faults in the PMSM drivetrains for series hybrid electrical vehicles (SHEVs) / Analyse et diagnostic des défauts dans les chaînes de traction à MSAP pour les véhicules hybrides sérieMoosavi Anchehpoli, Seyed Saeid 11 December 2013 (has links)
L'intérêt pour les véhicules électriques ne cesse de croitre au sein de la société contemporaine compte tenu de ses nombreuses interrogations sur l’environnement et la dépendance énergétique. Dans ce travail de thèse, nous essayons d’améliorer l’acceptabtabilité sociétale du véhicule électrique en essayant de faire avancer la recherche sur le diagnostique des défauts d’une chaine de traction électrique. Les résultats escomptés devraient permettre à terme d’améliorer la fiabilité et la durabilité de ces systèmes.Nous commençons par une revue des problèmes des défauts déjà apparus dans les véhicules hybrides séries qui disposent de l’architecture la plus proche du véhicule électrique. Une étude approfondie sur le diagnostic des défauts d’un convertisseur de puissance statique (AC-DC) ainsi que celle du moteur synchrone à aimants permanents est menée. Quatre types de défauts majeurs ont été répertoriés concernant le moteur (court-circuit au stator, démagnétisation, excentricité du rotor et défaut des roulements). Au niveau du convertisseur, nous avons considéré le défaut d’ouverture des interrupteurs. Afin d’être dans les mêmes conditions d’utilisation réelle, nous avons effectué des tests expérimentaux à vitesse et charge variables. Ce travail est basé aussi bien sur l’expérimentation que sur la modélisation. Comme par exemple, la méthode des éléments finis pour l’étude de la démagnétisation de la machine. De même, l’essai en court-circuit du stator du moteur en présence d’un contrôle vectoriel.Afin de réaliser un diagnostic en ligne des défauts, nous avons développé un modèle basé sur les réseaux de neurones. L’apprentissage de ce réseau de neurone a été effectué sur la base des résultats expérimentaux et de simulations, que nous avons réalisées. Le réseau de neurones est capable d'assimiler beaucoup de données. Ceci nous permet de classifier les défauts en termes de sévérité et de les localiser. Il permet ainsi d'évaluer le degré de performance de la chaine de traction électrique en ligne en présence des défauts et nous renseigner ainsi sur l'état de santé du système. Ces résultats devraient aboutir à l’élaboration d’une stratégie de contrôle tolérant aux défauts auto-reconfigurable pour prendre en compte les modes dégradés permettant une continuité de service du véhicule ce qui améliorera sa disponibilité. / The interest in the electric vehicles rose recently due both to environmental questions and to energetic dependence of the contemporary society. Accordingly, it is necessary to study and implement in these vehicle fault diagnosis systems which enable them to be more reliable and safe enhancing its sustainability. In this work after a review on problem of faults in the drivetrain of series hybrid electric vehicles (SHEV), a deep investigation on fault diagnosis of AC-DC power converter and permanent magnet synchronous motor (PMSM) have been done as two important parts of traction chains in SHEVs. In other major part of this work, four types of faults (stator winding inter turn short circuit, demagnetization, eccentricity ant bearing faults) of a PMSM have been studied. Inter turn short circuit of stator winding of PMSM in different speeds and loads has been considered to identify fault feature in all operation aspects, as it is expected by electric vehicle application. Experimental results aiming short circuits, bearing and eccentricity fault detection has been presented. Analytical and finite element method (FEM) aiming demagnetization fault investigation has been developed. The AC-DC converter switches are generally exposed to the possibility of outbreak open phase faults because of troubles of the switching devices. This work proposes a robust and efficient identification method for data acquisition selection aiming fault analysis and detection. Two new patterns under AC-DC converter failure are identified and presented. To achieve this goal, four different level of switches fault are considered on the basis of both simulation and experimental results. For accuracy needs of the identified pattern for SHEV application, several parameters have been considered namely: capacitor size changes, load and speed variations. On the basis of the developed fault sensitive models above, an ANN based fault detection, diagnosis strategy and the related algorithm have been developed to show the way of using the identified patterns in the supervision and the diagnosis of the PMSM drivetrain of SHEVs. ANN method have been used to develop three diagnosis based models for : the vector controlled PMSM under inter turn short circuit, the AC/DC power converter under an open phase fault and also the PMSM under unbalanced voltage caused by open phase DC/AC inverter. These models allow supervising the main components of the PMSM drivetrains used to propel the SHEV. The ANN advantages of ability to include a lot of data mad possible to classify the faults in terms of their type and severity. This allows estimating the performance degree of that drivetrains during faulty conditions through the parameter state of health (SOH). The latter can be used in a global control strategy of PMSM control in degraded mode in which the control is auto-adjusted when a defect occurs on the system. The goal is to ensure a continuity of service of the SHEV in faulty conditions to improve its reliability.
|
9 |
Analysis and control of a hybrid vehicle powered by free-piston energy converterHansson, Jörgen January 2006 (has links)
The introduction of hybrid powertrains has made it possible to utilise unconventional engines as primary power units in vehicles. The free-piston energy converter (FPEC) is such an engine. It is a combination of a free-piston combustion engine and a linear electrical machine. The main features of this configuration are high efficiency and a rapid transient response. In this thesis the free-piston energy converter as part of a hybrid powertrain is studied. One issue of the FPEC is the generation of pulsating power due to the reciprocating motion of the translator. These pulsations affect the components in the powertrain. However, it is shown that these pulsations can be handled by a normal sized DC-link capacitor bank. In addition, two approaches to reduce these pulsations are suggested: the first approach is using generator force control and the second approach is based on phase-shifted operation of two FPEC units. The latter approach results in higher frequency and lower amplitude of the pulsations, which reduce the capacitor losses. The FPEC start-up requirements are analysed and by choosing the correct amplitude of the generator force during start-up the energy consumption can be minimised. The performance gain of utilising the FPEC in a medium sized series hybrid electric vehicle (SHEV) is also studied. An FPEC model suitable for vehicle simulation is developed and a series hybrid powertrain, with the same performance as the Toyota Prius, is dimensioned and modelled. Optimisation is utilised to find a lower limit on the SHEV's fuel consumption for a given drivecycle. In addition, three power management control strategies for the FPEC system are investigated: two load-following strategies using one and two FPEC units respectively and one strategy based on the ideas of an equivalent consumption minimisation (ECM) proposed earlier in the literature. The results show a significant decrease in fuel consumption, compared to a diesel-generator powered SHEV, just by replacing the diesel-generator with an FPEC. This result is improved even more by using two FPEC units to generate the propulsion power, as this increases the efficiency at low loads. The ECM control strategy does not reduce the fuel consumption compared to the load-following strategies but gives a better utilisation of the available power sources. / QC 20101116
|
Page generated in 0.0508 seconds